What should be " PARAM_1 _ PARAM_3 _ DATE _ TIME _ PARAM_2 .ARCHIVE

Gurus:
I am configuring archlink.  On FILE, there is a parameter called:
<PARAM_1>_<PARAM_3>_<DATE>_<TIME>_<PARAM_2>.ARCHIVE.
What should be put here?
Thanks!

Hi,
This parameter is need to be set to determine in what format your archive file will be stored.
<PARAM_1> : is the main module of archive process, eg. MM, SD, FI
<PARAM_3> : is the archiving object of archive process, eg. MM_MATBEL, SD_VBAK, FI_DOCUMNT
<DATE> : is the date when archive file is created, in yyyymmdd
<TIME> : is the time in hhmmss format when the archive file is crated
<PARAM_2> : is another additional information you able to put on each archive file to define archive file more specific or more unique.
note that you can add more than one additional parameter.
our parameter is :
<PARAM_1>_<PARAM_3>_<DATE>_<TIME>_<SYSID>_<CLIENT>.ARCHIVE
and the archive file will be created as :
MM_MM_MATBEL_20080214_120101_SPR_888.ARCHIVE
my suggestion is don't put too much additional parameter, my setting described above is sufficient I think.
hope it help you,
rgds,
Alfonsus Guritno

Similar Messages

  • What should I see when I look at a Time Machine backup?

    As far as I can tell, Time Machine seems to be working. When I click on the Time Machine icon in the dock, the display comes up and shows me a number of windows. There appears to be one for each of the previous backups. However, the windows are completely empty. The are no contents in any of the windows. Is this what I should expect? I discovered that clicking on the icons at the bottom of the window display will bring up the contents but it doesn't seem like I should have to do this. I'm trying to determine if this is normal behavior or if there is a problem with my installation.
    Thanks!
    Roger

    try mapping the IP address of the computer you want to share files and folders at home -- click on Start > Rum > type \\IP_ADDRESS_OF_THE_COMPUTER_AT_HOME > click Ok -- all files and folders that are shared on that computer should appear
    ex. \\192.168.1.50
    | isolate! isolate! isolate! |

  • What should I do if iTunes shuts down every time I try to open it?

    Every time I try to open iTunes on my mac, it shuts down.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I dont see 2lis_03_BX what should be the problem in LO cockpit?

    hi gurus,
    I dont find or see STock initialization 2LIS_03_BX data source in my LO cockpit or in RSA6 Tx screen, instead i find 2lis_40_s278.. what should i do to activate 2lis_03_bx data source and not with the above 2lis_40_s278...I am using R/3 4.7E as a source system
    thanks,
    kishore

    Praveen
    Install the DS usingt RSA5 and then only it will be visible in RSA6.
    Please follow the procedure mentioned in "How to inventory " ...the link is as follows -
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Hope this helps
    Regards
    Pradip

  • I received a message telling me that I´m out of memory in my iCloud account, but its not true, but i can´t no longer receive no email, what should I do?

    I received a message telling me that I´m out of memory in my iCloud account, but its not true, but i can´t no longer receive no email, what should I do?

    Begin deleting data that is stored in icloud, like emails and iOS backups.

  • When I go to download the newest version of itunes, it says the old one cannot be removed. What should I do?

    When I go to download the newest version of itunes, it says the old one cannot be removed. What should I do?
    I have tried multiple times to download the new iTunes, but every time the message saying the old version cannot be removed pops up. Any suggestions?

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • HT1494 I have a pc and when I plug in the ipodnono watch it tells me to reformat disc, what should I do?

    I have a pc and when I plug in the ipodnono watch it tells me to reformat disc, what should I do?

    Is this the first time you are connecting this iPod to your PC or is this the PC you normally sync the iPod with?
    Can you cancel that prompt?  If so, does the iPod still appear in iTunes after that?
    B-rock

  • Reseting the date and time on photosmart 5510

    Having replaced the internal battery,the date and time on scanned items to memory card is giving 1st january 2001.how can i reset this.

    Hey @dube55,
    I am aware that your Photosmart model does not have a fax. Because I do not have a Photosmart 5510 here and have no access to the Embedded Web Server I gave you the generic tab options. My apologies for the confusion.
    The Date and Time option under the Embedded Web Server for your printer should be located under Settings or Tools. It may be under a sub-menu on the left hand side, such as System or Preferences. Feel free to click on the options to explore what you are able to alter on your machine.
    If you still do not see a Date and Time option we will need to run a Power Reset on the printer. Doing so should prompt you to enter the date and time when reconfiguring your printer. If this fails, we may need to run a Factory Restore.
    How to Perform a Hard Reset:
    Turn your printer ON
    With the printer ON disconnect the power cable from the rear of the printer for 30 seconds
    Plug the power cable back in
    The printer should start back up on its own
    Once the printer returns to the ready state, try another scan to verify if the time and date stamp is correct
    Should the issue persist, please proceed with the reset below.
    How to Restore Factory Defaults:
    Turn your printer ON
    Touch the right arrow button until you see Setup (wrench)
    Touch the Setup button
    Select Tools
    Select Restore Factory Defaults
    Choose Yes
    Once the Restore is complete your printer should start back up and may prompt you to enter the date and time.
    Please let me know if these steps work for you. Best of luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • How to get the date n time for log in ODI

    Hi,
    I wanna ask, what is the syntax for getting the date n time when i specify the location of log for Interface. Thanks.

    I quite do not get what you are trying to achieve here.
    - In a mapping, use the DBMS engine sysdate command.
    - In a variable, you can refresh the variable value using a "select sysdate from dual" type of query.
    - You can also use the appropriate odiref substitution method to get a date. For example:
    Current year is: :<%=odiRef.getSysDate("y")%>
    Hope this helps.
    -FX

  • Getting user name, date and time into 1 field

    Hi All,
    I have to add a new field in a customising include of AUFK table. This field should have user name, date and time. How do I store all these values in a single field of the table? Please help.

    Ok Thanks all. Will try your suggestions. But there is one problem. As i have already mentioned that i will have to display this detail in one field of the table control, The format of display is: user name should be seen above and the date and time separated by space should be displayed below the name. How can i ultimately display this in the table control. Do i have to create 2 different fields (one for name and other for date and time) in the AUFK table or is there any other solution?
    Thanks

  • Concat of System date and Time

    Hi,
    For concatenating the SY-DATUM and SY-UZEIT we have to use the current date function from SAP XI. But, if w euse concat function then it will want two arguments to be sent??
    Regards,
    Aniruddha

    HI ANirudha,
    Can you please explain what is your input and what output is expected .IF you want date and time at any output field then it can be achieved with Standard date fuction CURRENTDATE .it does not expect any argument you ave to use it twice in one set property as date and in secoond function set propert as time then with the help of concat function you can get the desired output .
    Regards,
    Saurabh

  • Storage of  payroll data and time data

    hi friends,
    could u plz tell me what is meant by storage of  payroll data and time data????
    thanks in advance,
    regards,
    priya.s

    storing means..... storing payroll results... and time management infotype records....
    as time management details are very large and memory consuming... generally we give MODE N while declaring time infotypes using INFOTYPES statement...... so that only internal tables are declared but not populated at GET event.....
    payroll results are stored in RX cluster of PCL2....

  • Deliveries between dates and time

    Hi All,
    I've to find deliveries between last run date and time of a program and current date and time of the same program taking into account LIKP-ERDAT and LIKP-ERZET.
    LIKP-ERDAT and LIKP-ERZET  should be greater than Last run date and time and smaller than current date and time.
    Can anyone suggest the different ways of doing this?
    Thanks

    Hi
    U can check in table CDHDR also.. May be very useful..
    Just have look at that where  in u can find deliveries created/modified for period ....etc.
    Venkat

  • When i login on game center it say enter your birth date when i enter it and i perss next the birth day will come again and again what should do

    when i login on game center it say enter your birth date when i enter it and i perss next the birth day will come again and again what should do

    Start a game with Game Center and go from there.

  • HT4623 my ipod touch will no longer connect to my laptop because my ipod is not up to date, but it won't find a newer software. what should I do?

    my ipod touch will no longer connect to my laptop because my ipod is not up to date, but it won't find a newer software. what should I do?

    the computer is a macbook pro, mac os x 10.6.08 and the ipod touch is ios 6.0.
    the problem is that just updated the itunes on the computer and now the ipod won't connect because apparently the itunes on the ipod is not up to date but the iod is telling me that is is up to date, so i can't do a software update.

Maybe you are looking for

  • Water bottle spilled on my ipod touch 2nd gen 8gb . what do i do ?

    My water bottle spilled on my ipod touch 2gen 8gb and when i saw it i shut it down and i ran home and dried it off. i put it in a bag of rice for a night and i saw no progress. now the screen is black and there is no response. im scared because i hav

  • ITunes will not recognize my iPod miin _ HELP!!!!

    Hi I have a desktop running Vista and have iTunes version 9.02.25 running. I can connect my old 15GB iPod and iTunes will recognize it no problems. However when I try and connect my 6GB iPod mini, even though its charging, nothing happens. Can you pl

  • Change of apple ID details for updating

    When I initially setup my PC I registered it with an apple account which it prompts for when wanting to update software and also apps, I would now like to change this to use a different account. How do I go about it?

  • Unable to bind EJB Home Interface to the JNDI name

    Why do I get this error?? What is the jndi-name in weblogic-ejb-jar.xml Unable to deploy EJB: OrganizationEJB from sempire_bc.jar: Unable to bind EJB Home Interface to the JNDI name: com.sempire.builder.business _component.Organization. The error was

  • MP4 to FCP6

    I would like to start this project over.... I must be doing something wrong in FCP6. I have a MP4 file from a Flip Camera of an event..... which is video and audio. I also have a Audio CD with the same event recorded as AIFF. Here is the problem... w