What should be the quality of video and audio for bandwidth 768KB

Hello Friends
We are provoding 768kB bandwidth for our connection. Can any body tell us what should be the quality of video and audio we can set that does not effect frame rate which is 24 FPS.
thanks in advance.

Hi Samir
You could try out the bitrate calculator at http://www.adobe.com/devnet/flash/apps/flv_bitrate_calculator/ . It lets you try various encoding settings to see what fits best for the bandwidth available to you.
Regards
Mamata

Similar Messages

What do I need to transfer video and audio from my 2009 Macbook to my television?

I want to watch a movie with my family tonight, but the DVD is broken. I was planning on renting the movie online and transferring the video and audio from my Macbook to the television. What cables will I need to accomplish this? Also, does anyone know, were I to use a Windows instead, would transferring the audio be simpler? (And what would I need to do that?)

Try doing it without a cable!
Use AirDrop, described here:
http://support.apple.com/kb/HT4783
UPDATE - Oh, sorry, I see the article points out the MacBook is too old for AirDrop.
Message was edited by: sberman

What can be causing inconsistent DVD video and audio distortions...

Does anyone have any idea why the DVD I burn using DVD Studio Pro (from a 90-min FCP QT movie) - whether it’s compressed by DVD Studio Pro, or through Compressor (with bit-rates of 4 for avg., and 7.2 for maximum) - plays with some serious simultaneous video and audio distortions on my brand new DVD player – that don’t show up at all when played on a friend's DVD player.
As a test, I burned a DVD with just the video, and it does NOT play the same distortions on my DVD player. This obviously means the video distortion is related to the audio being there, but, I don’t know why, or how to begin fixing the problem.
Any help would be tremendously appreciated!

Oh yes, indeedy!
Go into the AC3 encode tabs and have a look around. If you never used A.Pack with older versions of DVDSP then none of this will look familiar, but essentially the tabs are exactly the same as the old A.Pack application.
You can set the desired bitrate - for stereo you don't need more than 192Kbps. You can set the dialog normailsation value (for now, type in -31 and press return) and you can set the compression type - just use 'none'.
This should get you a reasonably useable AC3 file for your project, but as you might guess, there is a lot more to it than that! Head over to http:..www,macprovideo.com and see if you can get hold of the tutorials for A.Pack, or find a copy of Martin Sitter's book for DVD Studio Pro (any version). The chapter on A.Pack is well worth reading and possibly justifies the price of the book on its own.
Once you have got the audio encoding sorted out and are using it on a disc, see if the distortion still happens.
Also, can you describe the distortion that you are seeing?

Embedding video and audio for internet flipbook

Dear All,
first of all, sorry if it's been asked before but I could not find direct answer.
My company, small translation agency in Poland, plans on to buy InDesign to improve quality of our output documents, but we have one more feature in mind and we don't know if InDesign CS6 supports this.
In a movie http://tv.adobe.com/watch/cs55-design-standard-feature-tour/create-more-compelling-ebooks- with-indesign-cs55/ Terry White presents how to make an eBook with embedded video. We need a solution to create a similar effect, but the final document would be accessible from WWW (eg. http://essentialabsurdities.com/dance/ - there is no video in the example) - we want people to be able to browse content like in a book (flipbook?) and access video and audio (embedded or stored on a serwer along the document) when needed.
Does InDesign support this? What should be the final format of such a document? Interactive PDF? SWF? Everybody says Flash is going to be retired soon (Apple does not support it, Android devices are soon to follow, the same for PCs in the nearest future probably) so we do not want to use this.
Many thanks for your opinions on the issue.
Best wishes,
Michal Kornacki

I have no incoming video for my Jabber account. I was doing some testing for one of my customers who had this issue. Here is what I found. I have a EX90 registered to VCS on a corporate network. I have my Jabber Express client I downloaded and installed. When I call to or from either I don't receive video on Jabber Express but I get audio from the EX90. I get Audio and video on the EX90 from Jabber. What I found when I was troubleshooting is that if you leave the call up for 30 seconds I finally start recieving video on Jabber from the EX90. After testing a few calls this happened every time. I then checked the call settings on both sides during the call. Both endpoints are experiencing 50% or so packet loss until the video started being sent to Jabber and then the packet loss dropped to 0. So I would assume there is something wrong on the Jabber Express end that is causing a 30 second or so delay when the video is being sent through the proxy. Has anyone else had this exact issue?

No incoming video and audio for new Jabber video account

We have registered a couple of jabber video account, but they all have the same issue, couldn't successfuly establish a call.
However, it seems working fine for old jabber video account.
Anyone can help?

I have no incoming video for my Jabber account. I was doing some testing for one of my customers who had this issue. Here is what I found. I have a EX90 registered to VCS on a corporate network. I have my Jabber Express client I downloaded and installed. When I call to or from either I don't receive video on Jabber Express but I get audio from the EX90. I get Audio and video on the EX90 from Jabber. What I found when I was troubleshooting is that if you leave the call up for 30 seconds I finally start recieving video on Jabber from the EX90. After testing a few calls this happened every time. I then checked the call settings on both sides during the call. Both endpoints are experiencing 50% or so packet loss until the video started being sent to Jabber and then the packet loss dropped to 0. So I would assume there is something wrong on the Jabber Express end that is causing a 30 second or so delay when the video is being sent through the proxy. Has anyone else had this exact issue?

Hdmi video and audio for hp pavilion dv6 1050us does not work

I'm trying to use my hp pavilion dv6 1050us notebook with a TV Philips model 40PFL8605D using a HDMI cable but nothing function: can't get the image displayed at computer on the TV display. The HDMI cable and the same TV were tested using a ASUS notebook and everything worked all rigth: video and sound. Then I concluded that the only possible source of problem is my HP pavilion dv6 1050us notebook.
Can I get some help?

Hi (:
I frequently play The Sims 3, I have all, but myabe 3, extensions. And I have a Pavilion dv6-6c15nr Entertainment PC. Now I was wondering, is this a bad idea? Occassionally, my games will freeze and even just completely glitch within the game, sometimes unallowing me to save. It's very frustrating, especially when you get so far. My question is would it be better to just get a gaming pc and leave this one to surfing the web and doing school work? Or is this one good, and can I download or buy something to help my computer maintain or improve its performance?

MY IPHONE 4 16GB IT SWITCHES OFF AUTOMATICALLY EVEN WHEN I HAVE MORE THAN 60% BATTERY AND WHEN I CONNECT IT TO MY LAPTOP IT RESTARTS WHAT COULD BE THE REASON PLS SPECIFY AND SOLUTIONS FOR IT SHOULD I VISIT AN APPLE STORE FOR IT

My Iphone 4 switches off automatically with 60% battery balance and doesnt start, also when i connect it to my laptop it starts back and shows the battery balance and it stay on for another few hours even without recharging.
what is the reason for this. do i need to take it to the apple store to get it checked
pls inform as its a costly phone and i cant just take it to any roadside person.
awaiting your reply

These features are most likely result of faulty battery. Make Genius reservation and take to Apple Store for free quick battery diagnostic testing.

Whats should be the start up timing and turn off timing in the new macbook pro non retina display?

i brought a macbook pro last week!
15.4"
2.6ghz
8gb ram
750 hd
ITS 2012 EDITION !!
I JUST WANTED TO KNOW THE STARTUP AND THE TURN OFF TIMING !!!
PLZ HELP ME !!!

thiva xD wrote:
can i turn off my mbp every day??
can i use it plugged even if shows 100%
Yes you can shutdown as many times per day as you like
Yes you can use it plugged in even if the battery shows 100%, as per Apple guide on batteries here: http://www.apple.com/batteries/notebooks.html
They recommend you use the battery and allow it to drain to below 40% of capacity atleast once a month to in their words 'keep the juices flowing' and for longterm storage where you won't be using the device, they recommend you unplug it and let it drain to about 50% before shutting it down and not using it for a long period of time ie: 6 months
Cheers
Sidonsoft.

Is there a way to disable the auto play video and audio ads that are showing up on the web these days?

A lot of sites have video ads that load and start playing while safari is loading the entire page - slows everythiing down. Also a couple news sites I go to have autoload/play content. Is there a way to disable these auto loads?

Install the ClickToFlash or ClickToPlugin Safari extension.

What should i use to download videos besides paying for itunes?

okay well i have limewire and i have downloaded like 3 episodes of family guy and some music videos. i downloaded them in .mov cause the guy at bestbuy said i had to. soo wat site could i download from, or wat other formats can i download. or how do i convert formatts to fit my ipod.

Yes be smart by mentioning that you seal music via p2p software. But also realize that the only format that you can use to sync videos to the ipod is specified on the technical specs of the 5g ipod here:
"H.264 video: up to 768 Kbps, 320 x 240, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats
MPEG-4 video: up to 2.5 mbps, 480 x 480, 30 frames per sec., Simple Profile with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats"
Those are the only video formats supported by the 5g ipod.
I am going to guess you are using windows operatong system so to convert video you will need this software:
http://www.videora.com/en-us/Converter/
get support for this software here
http://www.pspvideo9.com/forums/index.php?c=8
this is not apple software so dont ask questions here for this software.
Well to get other video you could always BUY THEM if you can do that. Hope your smarts get better!
GFF

Video and audio formats for iPad

Hey, guys.. I've tried searching this up in the forum but didn't have any luck with that..
I can't seem to upload my movies and songs into iPad... I tried converting my movie into .mov and .mp4. They can both be imported into my iTunes library but when I drag it to the iPad tab it says it cannot be copied because it cannot be played on the iPad. And some of my albums just can't be imported.
May I know the preferred format for my movies and my songs? And what could be the problem with my importing..
Thanks heaps.

Here are the spec for video and audio for the iPad:
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Mpeg2 DVD VOBs Video and Audio into QuickTime ?

How can I read the mpeg2 VOB files from some DVD that we created into QuickTime Pro with the MPEG2 playback component ?
We have an app that does video and audio processing built on QuickTime. After the processing is done the result is written to an mp4 file using QuickTime export. We now have to be able to read DVDs that we create into this app (QuickTime), and after processing we must se the QuickTime export option to create the mp4 file. These are not commercial DVDs and are not copy protected. I'd like to just be able to read the mpeg2 video and audio directly into QuickTime but I haven't yet found a good way to do this. Here is what I have tried:
1) I can read individual VOB files with QuickTime, but I don't get any audio and I need all the VOB files as one.
2) I have used MPEG Streamclip to open the DVD VOB files and exported the demuxed mpeg2 video and aiff audio. Both files open together in QuickTime but since the total size of the video is over 4 GB the video and audio are off and drift more so throughout the video.
3) I used libdvdread to read the DVD and create a single MPEG2 file. This can be read by QuickTime but I don't get any audio. From what I understand this is muxed video and audio which QuickTime doesn't understand, but is playable by VLC.
I think I could probably ulibdvdread to read the VOB files into a muxed MPEG2 file, then use ffmpeg to convert this to a very large DV stream, then import that into QuickTime, but there has to be a better way than to do the lengthly and large file size conversion to DV which is not a format I ultimately want.
Before we go and write our own, I'm looking for a simple way to read the mpeg2 video and audio from a DVD format directly into QuickTime and preferably something that can be integrated into our app and not use another commercial stand alone app.

OK, I can't tell you what we are doing, you'll have to trust me that it's for a very good cause. I'll simplify the use case as an example. If I can do the following we'll be OK:
1) Read video/audo files from a DVD that we created
2) Open these files with the QuickTime Player, click on Export to Apple TV to create an output file.
I'd rather not do an interim conversion of the video data (like use a 3rd party app to convert to mp4 first and then read into QT, but I'm considering a conversion to DV) because that could seriously hurt the apps effectiveness. I also can't use another app (MPEG Streamclip, HandBrake, VisualHub, etc.) to do the conversion.

Can't play Video and audio tracks.

What software components are necessary to play the video and
audio tracks on OTN.
I'm using Windows 2000.

Most of the iDevelop 2001 videos and audios require a Real
Networks player.

Video and audio choking

Ever since I upgraded to Moutian Lion I'm having an issue where my video and audio streams are choking while doing anything. For example, I'll be streaming spotify and working on a photoshop file (below 20mb file size), and the audio will start cutting out or sounding like an old cassette tape getting eaten by the tape deck. Can anyone lend a hand?
Thanks!

One other thing to note. It's not my internet connection. It happnes when I'm playing iTunes files that are saved locally. Again, when my second cinema display is plugged into thunderbolt, I get the latency in the playback (both video and audio) while doing even basic tasks like internet browsing. If I unplug the display the problem goes away. I'm fully up to date on all OS updates and Firmware updates.

Working with Video and Audio...Please help (i am not a coder!)

Hey all. I am currently working on a project in Flash (CS3
action 2.0)
It is an animation and it includes a layer mask of a TV
screen, which shows a precut quicktime movie on the screen.
I am working with multiple scenes (11 to be exact) they are
all my different cut points.
The animation consists of 1st scene- VO (voice over) and BG
SFX. When I hit Apple+Enter this part plays sync'd up correctly.
However as the scenes progress on the sound gets out of whack.
Scene 2 consists of the quicktime movie (Video and Audio)
mask playing on the screen. All sound heard is a part of the .mov.
For this one the timing is also good.
Here is where it gets fluky. The next scene consists of a VO
and BG SFX. (and only those things) However, at this point of the
movie i hear the sound of the next .mov i have embedded in the file
(from scene 3). This is all happening well before that scene even
shows up in the preview.
I hope i explained it as clearly as possible. Anyone have any
ideas?! I would greatly appreciate it!
btw- i have set the frame rate to 29fps to match that of the
quicktime movies that are embedded.

Hi Brian, I don't mean to nit-pick but this is an
actionscript 3 forum, so you'd probably have better luck with the
general forum for non-AS3 questions.
There could be a couple of things that are causing a problem,
its hard to say without actually having your project on hand.
It almost sounds like your movie is taking longer to load, if
thats the case you could simply start the audio a little later in
the time line to sync it up.
I know you don't want coding solutions but you can probably
have flash "wait" for the movie to begin playing, and have that act
as the starting point for the audio.

What should be the quality of video and audio for bandwidth 768KB

Similar Messages

Maybe you are looking for