What should be the translation ratio between KRW and TWD

Hi,
What is the translation ratio between KRW and TWD I should maintain on transaction OBBS.
Please advise.
Thanks...
Ram.

Strictly speaking, the translation ratio depends upon what exchange rate you are comfortable with. One can only suggest - the System owner has to be the judge of what ratio they want to maintain the ratios at.
Due to the prevalent values for the two currencies, I suggest a ratio of KRW to TWD of 100 : 1.
Of course, that doesn't mean you can't use 10 : 1 - remember it's at best a recommendation / best practice.
Please remember to assign points if found useful.
Regards,
Gulshan

Similar Messages

What is(are) the difference(s) between iphoto and imovie apps for the imac as against ipad3?

What is (are) the difference(s) between iphoto/imovie apps for the ipad as against imac?

The Mac version would be more complex and be able to do more stuff, while the iPad version can do more simple things due to the lower processing power and the fact that it's an iPad.

What should be the host mailserver

Hi everyone,
I am testing the odisendmail. It throws an error
avax.mail.SendFailedException: Sending failed;
nested exception is:
     javax.mail.MessagingException: Unknown SMTP host: smtp.mail.xx.com;
nested exception is:
     java.net.UnknownHostException: smtp.mail.xx.com
     at javax.mail.Transport.send0(Transport.java:218)
     at javax.mail.Transport.send(Transport.java:80)
     at com.sunopsis.dwg.tools.SendMail.actionExecute(SendMail.java)
     at com.sunopsis.dwg.function.SnpsFunctionBase.execute(SnpsFunctionBase.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
I know that there is a problem with my host server. My question is if i need to test this thru my laptop what should be the values for host: from and to:
Please suggest.
Regards
Babul

host : mail.yourcompany.com
to : [email protected]
from : [email protected]
The above assumes that your mail server allows unauthenticated emails.
Also read this article to test if a mail server is reachable using any computer:
http://asktom.oracle.com/pls/asktom/f/f?p=100:11:0::::P11_QUESTION_ID:2118740358226

The Correct Space Between You And Your Monitors

Something that always crossed my mind was the space between your monitors and where you are seated. How far exactly are you supposed to be positioned from your speakers in order to read and hear correctly. Most producers would comment that people produce in all types of environments, headphone close rang monitors, far range monitors. But what exactly is the ideal space between you and your speakers? To look into this issued even more closely each speaker is designed differently, there for you cannot look at them all equal as far as performance is concerned.
How far are you away from your speakers?

dude it depends what you want
I got mine at about 1-meter to 1.5-meters at my home studio
at the big studio i've got two pairs of monitors in there and they both 1.5 meters
other people will go as far as 3-meters, in your case get abit closer as you said before that your room is not acoustically treated there for sitting too far away will give you a mix of 50% of the speakers and 50% of the room
but you need 80% of the speakers and 20% of the room
ps: don't just leave this topic alone and start another one, because its annoying when people don't if you've been help or not and they keep trying to help you
and people also don't know if you are reading your post or your just using it as an amusement forum just for fun on your lunch breaks
so please reply back and let people know if they've helped
stash

What is the main difference between ws_upload and gui_upload?

Hi All,
What is the main difference between ws_upload and gui_upload?
In what contexts should we use these two function modules??
Thanks,
Creasy

search the forum before posting.
You can find lot of posts related.

What should be the MSS version ????

Hi,
Hi I have installed my ESS 6.0 business package SP 11 on my development Enterprise portal 7.0 SP 11.
The XSS file I used for this installation was :-
PCUIGP of SP11
ESS of SP 10_10 (bacause SP11 SCA's was giving errors at the time of installation,so as per the recommendations we installed its SP 10)
Going further,I installed the NWDI of SP11 on the same host of my EP SP11 as another SAP instance.
In this developers have already started building their tracks and source codes/configurations and did import & all.
Now in our landscape,request for MSS installation on the same dev EP7.0 has come.So my questions are:-
1) What should be the version of Business package MSS. should it be 10 or 11 ?
2) If,I am installing the business package of MSS of SP11 then what should be the version of XSS files for MSS..should it be 10 or 11.
3) For MSS of 11 version.will there be any compatibility issue with ESS,as my XSS for ESS is at 10 ?
4) If require,is it possible to upgrade my ESS now from 10 to 11? will it be safe now?
Kindly please reply to me as early as possible.
Regards
Saurabh Sharma

Hi Abhishek,
1.As i said,we have already started customizing the webdynpro source code on xss-ess 10 in nwdi track,so would it be advisable to upgrade to xss-ess to SP11and then do the fresh installation of MSS SP11,as all our changes will be lost?
Yes, if you upgrade, all your customization will be lost.
can we go for repair connection between 10 & 11 in this case?
I dont know whether I understand your query or not. Refer sap note 872892. Refer the pdf which is attached to this note and then create the required tracks. Then you can find out all your changes in SP10 that you had done and can apply same in SP11 or SP13 whichever you will upgrade to.
2.As I told you that my WAS(EP) is at SP11,so I have one question,moving forward if we upgrade our ESS and MSS to SP13,will I have to upgrade my EP also to SP13?
Yes, it is fine to have ess, mss at SP13 even though EP is at SP11.So no need to upgrade EP.

What is the fundamental difference between classful and classless routing?

Hello to all,
After reading several RFCs, guides and HOWTOs I am confused by an apparently trivial question - what is the basic, fundamental difference between classful and classless routing?
I am well aware that - said in a very primitive way - the classful routing does not make use of netmasks and instead uses the address classes while the classless routing utilizes the netmasks and does not evaluate the address classes.
However, already in 1985 the RFC 950 (Internet Standard Subnetting Procedure) stated that the networks can be further subnetted using the network mask. Since then the routers are expected to use network masks in the routing decision process in the precise way they use it nowadays. However, if the routers use network masks they are doing the classless routing, aren't they? Where is then the difference if we used to describe the 80's way of routing as a classful routing? Or was it already the classless routing? The RFCs about CIDR came gradually only in 1992 and 1993.
If somebody could give me an insight into the key difference between classful and classless routing (and perhaps into the Internet history, how was the real routing done then) I would be most grateful.
Thank you a lot!
Regards,
Peter

Hello Mohammed,
I am afraid we still have not understood each other ;) I am not looking for the algorithms used to select the best path. I am well aware of them, both Ford-Bellman and Dijkstra, and about their internals. By the way, these algorithms do not have any influence whether the routing is classful or classless because they deal with metrics, not with masks. For example, a classless EIGRP internally uses a distance-vector algorithm, not a SPF algorithm.
I will try to explain once more what is my problem... There are two terms commonly used but badly defined: the classless routing and classful routing. Originally, I have thought that the classful routing works as follows:
- The routing table consists only of classful destination networks (major nets), metrics and respective gateways. No network masks are stored in the table because we are classful, that is, we use exclusively the route classes and all entries in the routing table are already classful.
- When routing a packet, the router looks at its destination IP address and determines the major net of this IP address (that is, the classful network that this IP address belongs to). Then it looks up the corresponding entry in the routing table and sends the packet to the respective gateway.
I thought that the classful routing works in this way. I won't describe the classless routing - both of us know how do the today's routers select the next hop.
However, in the RFCs 917 and 950 which were published in 1985, long ago before the term 'classless routing' was coined, the network mask was already defined and it was stated how the routers should work with it.
Now I am confused. The terms classless addresses and classless routing were defined sometime in 1990's, therefore I assume that the routing before the invention of classless IP assignment can be in fact described as classful. In other words, I thought that the routing that was commonly used in 1980's did not use netmasks and can be described as classful because the notion of classlessness came first in 1990's. But now I see that netmasks were defined in 1985.
Now where am I wrong? Do I understand the classful routing properly as I described it? Is it correct to talk about routing in that era as classful although the netmasks were already in use? Or was it already the classless routing?
Basically I am trying to understand what was called the classful routing if the classless routing is said to be something different.
Mohammed, I am most grateful to you for your patience and suggestions! Thank you indeed.
Regards,
Peter

What is the main difference between eewb and aet tool ?

Dear all,
What is the main difference between eewb and aet? Both ways we can create fields and coming to aet is in crm 7.0 and eewb is in 6.0.when we are creating fields through eewb we should have technical knowledge but aet tool is a simple tool as a function people also can easily add the fields. I want to know is there any main difference between both these tools.
Regards,
Jemmi.

EEWB works from SAP GUI whereas AET works from WEB UI. AET is developed on top of the EEWB. Most the Objects are supported barring a few through AET. It's a very usefull tool for SAP CRM.
Since in CRM SAP GUI will be phased out soon, AET will be prominent. One will see lot more features in upcoming relase in AET tool.
Regards,
Harshit

I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks

I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks

>SystemPreferences>Network>DNS

How do I add a movie from my laptop to iTunes, what should be the file extension.

How do I add a movie from my laptop to iTunes, what should be the file extension.

The extension is usually .mov, .m4v, or .mp4. But you can't just change the extension. The movies have to be encoded in a particular fomat. Anything downloaded from iTunes or plays in Quicktime player will be fine.

What are the major differences between BODS and Talend ?

Hi Friends,
We had a client meeting 2 days back regarding BODS project, But our client is showing more interest on Talend. We have explained/demo him on BODS. Could any one please tell me, What are the major differences between BODS and Talend ? What are the features of BODS which are not there in TELEND ?
Thanks,
Bheem.

Hi,
If you talk difference than Talend is an open source. SAP DS as huge advantage when it comes to loading data into SAP and it is more flexible with lots of inbuilt features and easy to load data into SAP using DS directly and extracting data from various legacy systems.

IDVD is producing DVDs which chop the edges off my video. I have tried changing the aspect ratio between 4:3 and 16:9 but it hasn't helped. My TV is definitely on the correct settings. How can I solve this?

iDVD is producing DVDs which chop the edges off my video. I have tried changing the aspect ratio between 4:3 and 16:9 but it hasn't helped. My TV is definitely on the correct settings. How can I solve this?

One way to to put the videos into an iDVD slideshow
and set iDVD's Slideshow preferences to always scale slides to TV Safe Area.
However, some users have reported that the audio quality using this method is lessened. I've not noticed it but then I don't have a good ear when it comes to that sort of thing. If you add more than one video in the same slideshow do not select any transition.
OT

What should be the quality of video and audio for bandwidth 768KB

Hello Friends
We are provoding 768kB bandwidth for our connection. Can any body tell us what should be the quality of video and audio we can set that does not effect frame rate which is 24 FPS.
thanks in advance.

Hi Samir
You could try out the bitrate calculator at http://www.adobe.com/devnet/flash/apps/flv_bitrate_calculator/ . It lets you try various encoding settings to see what fits best for the bandwidth available to you.
Regards
Mamata

What is the Join condition between mtl_system_items_b and mtl_onhand_quantities_detail

Hi,
What is the Join condition between mtl_system_items_b and mtl_onhand_quantities_detail?
Thanks & Regards,
Hari Babu

Please see the query in (Consolidate Onhand Quantity /Sum Quantity Zero in MTL_ONHAND_QUANTITIES_DETAIL (MOQD) / Concurrent Program Consolidate Inventory Onhand Quantities / Datafix for 0 Quantity Displayed For Finished Goods (Doc ID 353345.1)), is shows how to join those 2 tables.
http://etrm.oracle.com
Thanks,
Hussein

I want to know what for is the "Sync" button in Lightning and if there is a way to sync my LOCAL Lightning calendars between two computers. Thanks

I want to know what for is the "Sync" button in Lightning and if there is a way to sync my LOCAL Lightning calendars between two computers. Thanks

sync is about synchronizing network calendars. Simply create a network calendar and synchronize it on multiple machines and forget local calendars.

What should be the translation ratio between KRW and TWD

Similar Messages

Maybe you are looking for