What should default permissions be of the Groups folder be?
While trying to sort out our Group shared folders permissions problems I might have changed the permissions of the Group folder (/Volumes/Server/Groups) in Server Admin.
Can anyone tell me what the default permissions for that folder should be?
I had a similar problem:
<http://discussions.apple.com/thread.jspa?messageID=5876784#5876784>
and Gerrit came to the rescue! Wonder if you migrated from Tiger and if so then the above thread might have some answers for you. Seems like the standard Group ID (gid) changed from Tiger to Leopard and has wreaked havoc on file sharing. I was able to remedy my situation (so far - still not thoroughly tested) by changing the gid of all files back to 20...which matches "staff" on the clients. This is still confusing and Apple's documentation is half-baked regarding this as far as I'm concerned.
Similar Messages
-
My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.
Restart your WiFi router and printer by removing power for 30 seconds.
-
When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?
iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538 -
when I want to install some application from apple store, I always got message " An unknown error has occurred" what should I do to install the application?
I have the same problem. I need answers on how to fix this. any ideas?
-
When trying to uninstall iTune (because the current install has problems; iTune error message states it cannot sync and that I should reinstall the application; also, it fails when I tried to upgrade to the latest release), I get the error message 2324. What should I do to reinstall the application?
That installer error is a "Can't open file" error
It suggest that you may have a corrupt file.
Try running a disk check
http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors
If it fixes errors try uninstalling iTunes again.
If that doesn't work, is it possible for find out the name of the problem file, is further information available? Try looking in your Action center - that's on the control panel. Another place is in the Windows Error logs. From the start menu , right click on "Computer" and select manage, then Event viewer.
If nothing emerges, try a manual uninstall of iTunes and related programs according to this method:
http://support.apple.com/kb/HT1923
Don't worry if an uninstall fails, that is expected. Go on to the part where you have to delete files (2. Verify iTunes etc completely deleted) . Hopefully you manage to find a file that can't be deleted, that is the one we will need to deal with. -
I bought a song from the itunes store and downloaded it and it said download was complete but when i go to play the song it will only play the first 14seconds of it then it cuts off. what should I do to retrieve the rest of the song?
If you live in a Region that allows re-downloading Music...
Delete the Song(s) and re-download...
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us -
What should be done to include the current controlfile in the database copy
Hi
When trying to create a copy of the database it always fails copying the controlfile
What should be done to include the current controlfile in the database copy with the %b format
RMAN> backup as copy database format 'd:\backup\%b'
2> ;
Starting backup at 13-SEP-10
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile copy
input datafile file number=00001 name=D:\ORACLE\ORADATA\ORCL\SYSTEM01.DBF
output file name=D:\BACKUP\SYSTEM01.DBF tag=TAG20100913T204940 RECID=16 STAMP=729636617
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile file number=00003 name=D:\ORACLE\ORADATA\ORCL\UNDOTBS01.DBF
output file name=D:\BACKUP\UNDOTBS01.DBF tag=TAG20100913T204940 RECID=17 STAMP=729636660
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile file number=00002 name=D:\ORACLE\ORADATA\ORCL\SYSAUX01.DBF
output file name=D:\BACKUP\SYSAUX01.DBF tag=TAG20100913T204940 RECID=18 STAMP=729636692
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
*copying current *control file**
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/13/2010 20:51:36
ORA-19715: invalid format b for generated name
ORA-27302: failure occurred at: slgpn
continuing other job steps, job failed will not be re-run
channel ORA_DISK_1: starting datafile copy
input datafile file number=00004 name=D:\ORACLE\ORADATA\ORCL\USERS01.DBF
output file name=D:\BACKUP\USERS01.DBF tag=TAG20100913T204940 RECID=19 STAMP=729636697
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:01
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
*including current SPFILE in backup set*
channel ORA_DISK_1: starting piece 1 at 13-SEP-10
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/13/2010 20:51:38
ORA-19715: invalid format b for generated name
ORA-27302: failure occurred at: slgpnEdited by: hrishy on Sep 13, 2010 8:26 AMhrishy wrote:
Allright your trick configure controlfile autobackup on does the trick but i am cluless why it worksWhy clueless? That's a documented and a perfectly normal behavior!
http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/rcmconfb.htm#BRADV89408
HTH
Aman.... -
Pls its very urgent - i dropped by iphone 3G and the display became very dim soon after and it still remains the same - pls advise what should be done to bring the display back to normal
sounds like you broke the display when you dropped it. There's nothing we users here can do for you.
Since the iPhone warranty does not cover accidental damage, you will have to pay to have your phone repaired or replaced. You can bring it into Apple for an out of warranty exchange in the country of purchase, or you can find a 3rd party iPhone repair store in your area. -
Are the Gameover Zeus and Cryptolocker malware a threat to Mac/Apple computers? if so, what should be done to protect the computer and personal information?
These are Windows viruses and will not effect your Mac.
GameOver Zeus P2P Malware: http://www.us-cert.gov/ncas/alerts/TA14-150A
Systems Affected
• Microsoft Windows 95, 98, Me, 2000, XP, Vista, 7, and 8
• Microsoft Server 2003, Server 2008, Server 2008 R2, and Server 2012
CryptoLocker Ransomware Infections: http://www.us-cert.gov/ncas/alerts/TA13-309A
Systems Affected
• Microsoft Windows systems running Windows 8, Windows 7, Vista, and XP operating systems -
What should be done to recover the database?
Hi all,
While backing up the database, the computer running Oracle loses power. After restarting the
computer what should be done to recover the database?
Please help me..
Thank you all for your cooperate.Thanks mr. Eduardo Rezende.
I'm an Arab student and now I study database administrator course. This question asked by my teacher. So, if anyone can answer this question and some other questions please help me. -
since installing Lion, I am unable to add to iPhoto from an e mail or desk top. Something about power pc. I thought I had a Mac! What should I do to restore the facility?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
I have an iMac 21.5" with a 2.5 ghz intel core i5 processor and 4gb ram and running os x lion. The computer is making noise like trrrrrrrrr!!! What should i do to stop the disturbing noise?
Your iMac should be almost silent.
Make an appointment with your Authorized Apple Service Provider. -
I cannot install Photoshop Elements 2.0 on the iMac I got last year. I have been using the PSElements on my PC OK. What should I do besides getting the latest PSElements?
I think PE 2 only worked as far OS 10.3 Panther. There is no alternative but to get the version that works on your 10.7 Lion Machine, which I think is PE 6 or higher.
-
My photos are in Raw Format when I open in Bridge and they appear very clean but when I transfer them to Photoshop they are full of noise. What should I do to fix the problem? Thanks.
are you sure its not just the way you are viewing the photo? you don't even see noise on the preview in Bridge and when I say preview I mean when zooming into the preview window. My thought process being in PS you are zoomed in more
-
When I attempted to remove SIM card from my iPhone 4S, the SIM tray came out leaving the SIM card behind. The SIM card is stuck in the iPhone. What should I do to retrieve the SIM card which is stuck in the iPhone?
bring your phone into an Apple store
Maybe you are looking for
-
How to remove spikes from a data channel
We wrote a module in DIAdem to look at each single point and used some logic to determine if it is a spike or not. If it is we replace it with the mean of neighbouring points. BUT this takes a long time for big data channels Is there a routine which
-
I am working with a Motorola i90c phone. The application successfully download to the phone, but then I try to initialize it I get a memory error. So I think may be the jar file is too big. Is somebody know what is the maximum allowed size for the ja
-
When I reinstalled Photoshop CS 5 on the same computer, my .exe file disappeared. Where is my Photoshop?
-
My payment was declined I need to update my payment info and it won't let me. My work is at a standstill on a deadline. Your website says help available 24/7 but your phone support is not currently open. Very frustrating just want to get on with my w
-
SharePoint Designer 2013 -- Workflow Manager is required to create Workflow
Hi, Is workflow manager is required to create workflow in SharePoint Designer 2013 for List Workflow. Is there any other alternative for this. With Regards, Jaskaran Singh Bhatti