What should I do if my iPad disconnects from my wifi while updating the software?

I decided to update my iPad to 7.1.2 early in the morning. While updating, my wifi router decided to disconnect, as a result, my iPad had to disconnect as well! Now my iPad is just frozen and load anymore!
Someone help ASAP!!!
MY iPad 2 was updating from iOS 7.1.1 to IOS 7.1.2.

Try a Reset in the first instance. With iPad switched on hold down both Sleep/Wake and Home buttons until the Apple logo appears. You may also find the following useful: http://support.apple.com/kb/HT1808
Regards,
Steve

Similar Messages

My Apple TV froze up while updating the software. What should I do?

My Apple TV froze up while updating the software. What should I do?

You can't do much else besides pull the plug. If it causes further problems you should be able to restore as below:
Get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
On the other hand you may be able to simply start the update again. If however the update continues to fail, you should try the restore routine above.

ITunes freezes on backing up iPad while updating the software to ios 8.

iTunes freezes on backing up iPad while updating the software to ios 8. Please help asap

Hi tac.sharma,
Welcome to the Apple Support Communities!
I know circumstances that keep you from updating your iPad can be frustrating. In this situation I would make sure your iPad is backed up to the iCloud, just to make sure your information is safe. After you have that backup, I would suggest following the steps in the attached article to help you through this update process with iTunes.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe

I have an 1st generation ipad. I am unable to update the software beyond 5.1.1. Why?

I have an 1st generation ipad. I am unable to update the software beyond 5.1.1. Why? It tells me my software is up to date.

Very possible.
You can often get the older version if you buy directly on the iPad
Go through the iTunes Store on your old iPad and purchase netflix, if you can get an older version of the app, iTunes will ask and prompt the download of older version.
Not all apps will be available.
I was able to put iBooks on my older iPod this way.

Curious about the iOS 5 software that is coming out. If I wait til its release to buy my iPhone 4 will it come with the iOS5 software already on it? or should I go ahead and buy my iPhone 4 and then update the software when the iOS5 is released?

curious about the iOS 5 software that is coming out. If I wait til its release to buy my iPhone 4 will it come with the iOS5 software already on it? or should I go ahead and buy my iPhone 4 and then update the software when the iOS5 is released?

Keaten wrote:
Yea I would have to say wait until the release of IOS 5, because the phone will probably run it a lot smoother. I mean go ahead and buy the Iphone 4 if you are dying to have it, because you can just update it which is no big deal at all, but it would be the smarter thing to wait for the new updates.
And the networ issue as far as I am aware is fixed on the Verizon iPhones, so it really depends on which service you have.
- correct me if i am wrong
Have to disagree here, Apple have not even announced an iphone 5, it is pointless to speculate that we will see one or not see one until Apple actually releases a statement. ios was built and tested on the iphone 4 so there will not be any slowdown or laggyness compared to a phone that has not been released yet.
If we are advising potential apple product buyers then we should not be putting them off buying a iphone 4 on speculations alone. Just because apple have for the last few years released an iphone every june/july does not mean then have to stick to this approach.
Apple have not issued any statement regarding an iphone 5, until this time it does not exist, only in heresay on the internet.
Any one looking to get an iphone 4, to you i would say waiting until ios 5 is released is a personal choice, no matter if you wait or not you will be able to update via itunes. One way or another in the future you will have to do an ios update via itunes whether this is the 5.0 software or 5,2,1.
Please note that Apple are very closed mouthed about new hardware releases and potentially a new iphone could be round the corner, however there is no evidence to suggerst this, i.e Apple have not even mentioned an iphone 5 this year anything you hear towards the contrary is media spin thus far and speculation.
ios 5 was built and tested to work seamlessly on iphone 4, the beta software released to developers is being tested on iphone 4. Please do not listen to people telling you that the iphone 4 will not run this ios as well as a phone that does not exist yet. When iphone 5 launches it will most likely have dual processors and not until its launch will the next gen apps start appearing.

Since downloading Mtn.Lion my epson printer doesn't work correctly & the entire system seems to be slower plus my iMac now disconnects from my wifi every time the mac sleeps. Can anyone help me with these issues?

I am having problems with my Imac (approx 1 yr old) every since I downloaded (from the App.Store) Mountain Lion. I am a working mom with 3 toddlers.....I have very little time to work on the computer which I primarily use for photograhpy needs. I am not computer savvy enough to figure out how to "fix" the new issues/problems and am frustrated. I am hoping someone can help me........
Issues just since downloading Mountain Lion:
1) My Epson R2400 printer is not printing properly. It wouldnt print at all from CS5 the first 2 days. Then just started printing. The prints aren't nearly as good as they used to be. I just installed Photoshop Elements 10 and have been able to print but the prints are just awful. I printed a test page and it was perfect. I've triple checked the settings in the print dialogue box to ensure the correct paper is chosen, etc. I've never let the printer manage the color before but it is the only option that gives a mediocre print at best.
     I've gone to Epson.com.   It says to update driver through Apple for Mtn. Lion. According to my computer I have no updates. Printer is connected via USB. Changed the ports, turned printer on & off. Emailed epson & they said to reset the print queue, which I did. Restarted the IMac Still no luck. (The error message I got when trying to print from CS5 is "filter failed." But, as stated before it just started printing today as I was typing this.
      I print out pics quite a bit and it seems the only time I have ever had problems is when I upgraded the OSX system. Why is that?? When I upgraded to 10.7 is when I first realized my print quality went down.
2) Now every time I "wake" up my computer it has become offline and has to go through the steps to reconnect to my wifi. Never did that before Mtn.Lion. I purchased the Airport Extreme Dec 2011. My computer was always connected before the update. Now I have to scroll down & pick my network & wait for it to connect before proceeding.   I double checked preferences and it is set up to check for updates automatically. What is that about??
3) It just seems that my system overall is slower. I love my mac but I am frustrated because I don't have the free time needed to do all this problem solving. I just need it to work properly when I have a few minutes to work on a picture. I imagine there are other issues, but these are the only 2 areas I've focused on since the upgrade.
I've read different views/feedback on Mtn Lion but haven't come across the printer issue or the wifi connection issue.
Can anyone direct me towards a solution? I really appreciate it!
T

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

Every since new os my ipad disconnects from my wifi over and over

SSince downloading new iOS my iPad will not stay connected to my wireless network at home. It seems to disconnect many times thought out the day. I have lots of memory I purchased the largest ipad available.

Hello Maryriceoc,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Best of luck,
Mario

I plugged my Ipad3 in order to update the software to version 6.1 but I got an error and my Ipad now is locked, it's showing the Itunes logo with usb cable on the screen. What should I do now?

I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?

You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

I have updated to lion. Set up an iCloud so contacts and calendar are shared between iMac iPhone 4s and iPad 1. But iTunes is telling me to update the software on the iPad and iPhone, but it just gets stuck contacting the software server. What should I do

I have updated my iMac to lion so I can use iCloud to share contacts and calendar between iPhone 4s and iPads 1. Somehow it seems to have worked although still not sure how to move stuff in and out of iCloud. iTunes is telling me to update the software on the phone and iPad. When I try to do this it just gets stuck with a box saying connecting to software update server. This has never happened before. I cannot update or restore either the phone or the iPad in iTunes although I have synced the info. What should I do?

Something went wrong with the update, this can and does happen with every version of iOS.
There is nothing wrong with the update.
Simply restore the device via iTunes on the computer.
If iTunes is stating it will take hours to update, that indicates an extremely slow Internet connection and is likely the reason the OTA update failed.

I have tried to update the software on my ipad 2, 16GB, through itunes, but the update has not been completed and has frozen, what should I do?

I have tried to update the software on my ipad 2, 16GB, through itunes, but the update has not been completed and has frozen, what should I do?

Hey there alaili55,
Welcome to Apple Support Communities.
It sounds like you ran into an issue updating your iPad 2 with iTunes on your computer. Take a look at the article linked below and try the troubleshooting tips that it provides, which will resolve most issues updating iOS devices.
Resolve iOS update and restore errors in iTunes - Apple Support
Cheers,
-Jason

I bought an ipad mini from some guy returning to the states and when i upgraded its os version its now asking for his apple id which i dont have. what should i do

i bought an ipad mini from some guy returning to the states and when i upgraded its os version its now asking for his apple id which i dont have. what should i do

That is Activation Lock.
You have to contact the previous owner to have him remove it
Find My iPhone Activation Lock: Removing a device from a previous owner

What should i do with my ipad because it fell down and the screen cracked but its still functioning

what should i do with my ipad because it fell down and the screen cracked but its still functioning

Up to you whether you want to get it serviced. If you don't, I'd suggest putting on a screen protector to help hold the screen together and try to prevent further damage. It's likely that it will eventually fail at some point, but you could get lucky and have it continue to work for quite some time.
If you decide you want to get it serviced, Apple does not repair iPads, but will replace the entire iPad for a flat fee. If you have AppleCare+ on the iPad, the cost will be relatively minimal; $49 in the US. Otherwise, see the Service Pricing section here:
http://www.apple.com/support/ipad/service/faq/
There are independent iPad repair services that may be able to replace the screen for less. Do a web search for "ipad repair". You can also look for parts and instructions and do the repair yourself. Note, though, that if you elect to have the iPad serviced by an unauthorized shop or perform your own repair, you will get no further support from Apple.
Regards.

What do i do when my ipad 2 turn off after i updated software to ios 7

does anyone know what to do when your ipad 2 gets frozen on the apple logo after updating the software of ios4 to ios 7?

If reset doesn't work, force your iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

Iphone hung while updating the ios what should i do ?

iphone hung while updating the ios what should i do ?

Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

My ipad disconnects from the wifi link

My ipad disconnects from the wifi link

Try #5 below.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

What should I do if my iPad disconnects from my wifi while updating the software?

Similar Messages

Maybe you are looking for