What should i do to print o/p in bold in character mode ?

Hi
I am using report 6i , in the priewer it shows bold but not in printout sheet
what should i do to get bold?
Thanks in advance...

hi,
follow the link mentioned above, it also works for Win98, the only difference would be the control commands for the printer. See your printer manual for printer controls.
<p>
Condensed mode escape sequence
</p>

Similar Messages

What should I do IF embed font doesn't include the character??

Hi there,
I am working on a Flash project which will work in Chinese. I embed a Chinese Font into the swf, with Flash Pro CS5.5;
and there is a character that not included by the embedded font, so it just does not show up, can I use system default font(device font) to show these characters?
How to do that?
Thanks.

you should select a font that includes all the characters you need and embed that font.

HT201263 what should i do if my ipod touch is not in recovery mode and it will not let me access anything on it

how would i put my iPod Touch in recovery mode if the screen says''iPod is disabled connect to iTunes

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My itunes account is locked , what should i do?

i was trying to purches chips for zynga poker and they asked me about the security questions i answered before and i couldnt remember the answeres and my account got locked , what should i do?

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. You have no iCloud since that requies iOS 5 If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes. If yo do not have a backup yo can't restoe from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I forgot my passcode for my 5th gen ipod and it won't restore because the 'Find My iPod' feature is on. What should i do?!?!

I changed my passcode for my iPod but I have forgotten what it is. I tried to restore my iPod through iTunes but it won't because the Find my iPod feature on iCloud is on. What should i do?!

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

HT1338 i cant open System Preferences.app and App Store,what should i do?

i cant open System Preferences.app and App Store,what should i do?

Step one is to boot into safe mode and see if the problem persists.

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

Restart your WiFi router and printer by removing power for 30 seconds.

I have recently upgraded to OSX 10.8.2 and now find that I cannot operate my scanner, an hp psc 1310 series printer/scanner. I get a message saying that Power PC is no longer supported. I am still able to print on the same device. What should I do?

I have recently upgraded to OSX 10.8.2 and now find that I cannot operate my scanner, an hp psc 1310 series printer/scanner. I get a message saying that Power PC is no longer supported. I am still able to print on the same device. What should I do?

Hi,
PSC 1315 no longer supported for scanning since Mac OS X v10.5 or while using any newer OS, there is no scan software provided by either HP or Apple (Image Capture)
You may find this information stated below for Leopard, the same apply for any newer OS version:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01234231&cc=us&dlc=en&lc=en &os=219&product=374568&sw_lang=
Image capture will not recognize your device as well, only print is supported as you may find listed for teh PSC 1310 Series below:
http://support.apple.com/kb/HT3669#HP
Although there is no official scanning support for your device you may still try the 3rd party VueScan software which list your scanner as supported and compatible with Mountain Lion:
http://www.hamrick.com/vuescan/hp_psc_1310.html
Shlomi

Apple took away my printer's drivers (HP Laserjet P1005) in Mavericks. What should I do?

I own a HP Laserjet P1005 that's shared in a wireless network, used by 2 pcs, a Macbook and several iPhones. All of them can print normally, only my Macbook doesn't. It lists the network and recognize the printer, but Mavericks took away the drivers from the list, leaving only two options: HP Deskjet Series and HP Laserjet Series PCL 4/5. I've chosen both PCL Generic and PostScript Generic too, and the PCL 4/5 option, none of them work. It adds the printer, but when I try printing, a dialog box opens and it keeps asking for a password, while I'm a guest in the network, so, it's unecessary (it has been always this way, no trouble whatsoever). BTW, back in Lion there was a comprehensive list, including my printer model. Now the drivers for my specific printer model are gone and I can't configure it without them. What should I do?

This didn't help me. I have a trusty old HP Deskjet 832c that was not included in http://support.apple.com/kb/dl907. But downloading the Gutenprint 5.2.9 driver fixed the problem:
http://gimp-print.sourceforge.net/MacOSX.php (It's the first one listed under Downloads.)
Note: I read elsewhere you should begin by resetting the printer system to purge it of any old drivers, so I did that first. Here is how to do it:
http://support.apple.com/kb/ht1341
Mitch Morgan

Hi, My printing has suddenly changed in adobe to a large scale, as in, what should be one page of print comes out as 24 pages? I havent changed anything, its happening on more than one document also, I have to stop my printer before all the pages spew o

Hi, My printing has suddenly changed in adobe to a large scale, as in, what should be one page of print comes out as 24 pages? I havent changed anything, its happening on more than one document also, I have to stop my printer before all the pages spew out. I have tried printing 'one single page' and it does exactly the same? Help?

Is the Poster Print feature turned ON?

I can't print to PDF but adobe seems to be loaded - what should I do? (on a mac...)

I bought the adobe suites package last summer. My photoshop, illustrator, indesign seem to be loaded ok. I cannot though print to PDF even though acrobat reader seems to be loaded. What should I do?

Hi jofrisch,
You cannot print to PDF on Mac as Adobe PDF printer is not available.
You can save the file as Adobe pdf though.
Regards,
Rave

Hi I have a Canon D420 and I added it on my mac by windows configure but every time i print i get this Canon UFR ll Printer Driver error -50. What should I do?

I try to print but I get error -50. What should I do?

The Hardware Test detected a RAM problem. Take out the chips and make certain that the connections are clean and reinstall them. Make certain that they are well seated.
If the problem occurs again, test with one chip at a time. Also swap bays if necessary.
Please indicate if you have installed new RAM and if so what brand and the specifications.
Ciao.
Message was edited by: OGELTHORPE

Trying to print a document from Pages, when I go to print it won't let me select the document. It is grey and I can't click it. What should I do?

Trying to print a document from Pages, when I go to print it won't let me select the document. It is grey and I can't click it. What should I do?

I'm not clear on how you're trying to print. When you select Print from the file menu in Pages the current document is already selected. Perhaps you need to show the details in the print dialog. The first screenshot is from Mountain Lion the second from an earlier OS where you click the blue down-facing triangle button (sorry, I can't remember which one).

Printer is idle - what should I do

My priner is "Idle". What should I do so I can use it again

Hello @w0j8c301,
Welcome to the HP Support Forums!
I understand that you're getting the printer status 'idle' when trying to print from your Mac OS X 10.10 computer to your HP Deskjet D2660 Printer. I would like to assist you today with resolving this issue. 'Idle' is perfectly normal to see under the Print & Scan window. It just means your printer is in a 'ready' status and should be able to print for you. Now, issues arise when your printer is showing as 'ready' or 'idle' but failing to print for you. If your machine is not printing from your Mac OS X 10.10 computer can I please have you follow the steps below.
Step 1: Reset the Print System:
To start, I am going to have you Reset the Print System on your Mac. Please click here for instructions on how to perform the Reset. When the website opens follow the steps under 'Resetting the printing system in OS X Lion' as the steps are the same for Mac OS X 10.10. This Reset will remove every printer from your Mac. However, it does not uninstall the printers. Therefore, should you use other printers on this Mac, once the Reset is complete simply ensure that the printers are connected via a USB Cable or Network connected and (+) Add them back in. Do not add your HP Deskjet back in at this time.
Once the reset is complete, please proceed to the next step.
Step 2: Uninstall Drivers and Software:
Next, please click here for steps on how to properly uninstall your printer. Once the site opens select the dropdown for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' and follow the steps under Method Two to complete the uninstall process.
Once the uninstall is complete, please continue on.
Step 3: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 4: Manually install Driver Package:
Please click here to manually download the Apple Update package for HP Printer Drivers v3.0. Once the website opens select the Download button at the top. Follow the onscreen instructions to install the driver package.
Step 5: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 6: Add the Device:
1. Click the Apple menu, and then click System Preferences.
2. Click Print & Scan, and then check if the name of your printer displays in the Printers list.
3. Click the name of your printer, click the minus sign (), and then delete the printer.
4. Click the plus sign (), click Add Printer or Scanner, click the name of your printer,
5. Click the Use or Print Using box, and then select the name of your printer in the pop-up menu. Ensure that the Deskjet driver is selected.
6. Click Add to add the printer to the list.
- Source
Once your printer is successfully added in, please try printing again to verify that the issue is now resolved.
Please respond to this post with the result of your troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

My printer wont print because I can't find the right password on (re)set-up. What should I do?

I"m running windows 8 (I think) and my printer wont print from my computer on the wireless function. I've tried uninstalling and reinstalling the software and updatuing but none of this seems to help. What should I do now.

Hi @mfk8
I am not sure I understand, what password are you looking for? Is the printer still on the wireless network? Perhaps the following document will be helpful; 'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

What should i do to print o/p in bold in character mode ?

Similar Messages

Maybe you are looking for