What should I know about getting my imac and powerbook repaired?

Hello again,
Just an update re my 2 computers. My macbook pro that refused to "wake up" or start has returned from apple and diagnosed as a problem with my "logic board" and has been returned repaired in warranty.
My imac who exhibited the ticking sounds and eventual failure to start is getting the hard drive replaced. I am being charged for 2 hours labour which comes to $300 aud.
Finally, while this is good news I am left feeling a bit uneasy. Can you advise me if 2 hours is an accurate time frame? And while I never save my passwords are they in there "somewhere?"
Thanks again for everyone who advised me with the problems I have experienced! And the wireless network is going strong with my notebook and my partner's pc.
Kind regards,
Becky Bell
imac G4 MacBook Pro   Mac OS X (10.4.8)  

Hello Becky,
2 hours is a remarkable time to open up an iMac and replace a drive.
The passwords are stored on the drive. I am sorry to tell you that they have gone with that drive.
See here...
I took my Mac apart
For more on what was done to your Mac.
Regards
Ian

Similar Messages

  • What should i know about MM module for a BW interview any docs?

    what should i know about MM module for my BW interview any docs?
    SDN experts are very helpfull to me. i will assign points. Thank you.

    Hi,
    If this is inventory management that you want to handle, you can use infocube 0IC_C03.
    Here a HowToguide:
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328</a>
    Jacques

  • IMac really slow compare to my new macbook air which i bought several month ago. What should i do to get my iMac fast?

    I have just bought a new Macbook Air several month ago, and i realize that my iMac is very very slow compare with the macbookair, what should i do to faster my iMac,
    This few point happen slow at my iMac:
    When Restart it is very slow.
    When search spotlight or search a file using finder.
    When Running iPhoto, iTunes, iMovie. Especially iPhoto
    When transfering image from my phone to iphoto.
    When Open New Application.
    When working in multi application when swich between application, sometimes it was hang for a few second.
    Sometimes typing aslo slow and the text wont come out and the cursor hold a few second.
    I think above 7 points was very annoying my working, especially when in a rush.
      Model Name:          iMac
      Model Identifier:          iMac12,1
      Processor Name:          Intel Core i5
      Processor Speed:          2.5 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          4 GB
      Boot ROM Version:          IM121.0047.B1F
      HD Capacity:          499.25 GB (499,248,103,424 bytes)
      Running OSX 10.9.2
    Could anybody help me to solve this problem, i am guesing maybe my HDD not working properly, or if i change to SSD it will be better? but how?
    Thanks to all of you that willing to help me.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 300 25 5120 KiB/s 1024 85 \\b% 10240 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 50 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'\n",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p ' ' {sub(/^ +/,"")};NR==6;NR==13&&$2< '${p[10]} ' 1,5d;/[Bmy].*:/d;H;$   { g;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6   { H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;$   { g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' '/(sh|ng|ic)$/p' ' $3~/[0-9]:[0-9]{2}$/ { $4="";gsub("  "," ");gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a)print "CPU: "a;if(b)print "I/O: "b;if(c)print "Net: "c" (KiB/s)";if(d)print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2.+/,"",a[n-1]);b=b"\n"$2" "a[n-1]" "a[n]" "$1;c=c$1;} END { d="sort";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF=int($NF/10240)} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L)f=f"\n\t"$0;} END { F=FILENAME;if(!f) f="\n\t[N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n\t...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' '/:/!p' ' /:/{$0="'"${p[28]}"'"};1;' ' $0;END { if(NR<100)print "com.apple.";} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message CReq "Beac|caug|dead[^l]|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Ane "SMC:" -o -k Sender fseventsd -k Message CReq "SL"' '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /u*/lo*/e*/per*/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@out[execname,uid]=sum(arg0)} tick-10sec {trunc(@out,1);exit(0)}'";done;l=(Restricted\ files Hidden\ apps RAM POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles 'Elapsed time (s)' Root\ crontab User\ crontab 'Global login items' 'User login items' );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v[0]=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "${v[0]}" ]];};A'$((3+i))'() { v[0]=` while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "${v[0]}" ]];};A'$((5+i))'() { v[0]=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "${v[0]}" ]];};';done;A7(){ v[0]=$((`date +%s`-v[3]));};B2(){ v[$1]="${v[0]}";};for i in 0 1;do eval ' B'$i'() { unset v[0];((v['$((i+1))']==0))||{ v[0]=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v[0]=` paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v[0]=`grep -Fv "${v[$1]}"<<<"${v[0]}"`;};C0(){ echo "${v[0]}";};C1() { [[ "${v[0]}" ]]&&printf "${f[$1]}" "${l[$2]}" "${v[0]}";};C2() { v[0]=`echo ${v[0]}`;[[ "${v[0]}" != 0 ]]&&C1 0 $1;};C3() { v[0]=`sed -E "${s[0]}"<<<"${v[0]}"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;D13 0 $((N1+2)) 3 2;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;A1 4 19 11;B4 0 0 44;C3 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&D22 11 17 17 20;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 52 0;B4 0 5 54;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 52 6;B4 0 7 54;B3 4 0 22;A3 14 6 52 0;B4 0 8 54;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 53 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 53 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&D13 21 0 32 19;D23 14 1 48 43;D23 14 2 48 44;D13 14 3 49 5;D22 4 4 50 0;D13 4 5 32 1;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D23 22 9 37 7;B1&&D13 10 42 32 41;D23 20 42 32 42;D13 25 37 32 33;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;B1&&for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;B1&&D22 29 35 46 39;A7;C2 40;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At or near the top of the results, there will be a line that begins with "System Version." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • What should I know about the Trustor Rapport malware protection update?

    I received a message to allow update of something trustor rapport malware protection. I did not know if I had it or if I should allow it to update. Anyone know about this?

    Trojan War
    If you discover a trojan program is running on your computer then look to the following information for assistance:
    1. A recent discussion on the Apple Support Communities: MacDefender Trojan.
    2. An excellent site devoted to Mac Malware: Macintosh Virus Guide
    3. Another site for removing MacDefende, et.al.: MAC Defender Rogue Anti-Virus analysis and Removal
    4. A new removal utility - MacDefenderKiller
    5. And to protect against a recent variant, MacGuard.
    Before you delete anything, we need your help. Some AV folks in our community need to analyze these files in order to protect others. Before you delete anything please consider doing the following:   Upload either the original .zip file or the MacGuard application to http://www.VirusTotal.com.  If either is not detected by ClamXAV, then also upload it to http://cgi.clamav.net/sendvirus.cgi.   If you are uncomfortable doing this for any reason and can determine the URL of the site where you got it please send the link to [email protected].
    Removing strange software can be a task.  The following outlines various ways of uninstalling software:
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash.  Applications may create preference files that are stored in the /Home/Library/Preferences/ folder.  Although they do nothing once you delete the associated application, they do take up some disk space.  If you want you can look for them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application.  In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder.  You can also check there to see if the application has created a folder.  You can also delete the folder that's in the Applications Support folder.  Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a Startup item or a Log In item.  Startup items are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder.  Log In Items are set in the Accounts preferences.  Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab.  Locate the item in the list for the application you want to remove and click on the Delete [-] button to delete it from the list.
    Some software use startup daemons or agents that are a new feature of the OS.  Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.  Unfortunately Spotlight will not look in certain folders by default.  You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead.  Download Easy Find at VersionTracker or MacUpdate.
    Some applications install a receipt in the /Library/Receipts/ folder.  Usually with the same name as the program or the developer.  The item generally has a ".pkg" extension.  Be sure you also delete this item as some programs use it to determine if it's already installed.
    There are many utilities that can uninstall applications.  Note that you must have this software installed before you install software you may need to uninstall.  Uninstallers won't work if you install them after the fact.  Here is a selection:
    AppZapper
    Automaton
    Hazel
    CleanApp
    Yank
    SuperPop
    Uninstaller
    Spring Cleaning
    Look for them and others at VersionTracker or MacUpdate.
    For more information visit The XLab FAQs and read the FAQs on removing software and dealing with spyware and malware.
    After removing all the components of the software you may have to restart the computer to fully disable the software.  This will be the case when removing software that has installed a daemon.  After the daemon has been removed you need to restart the computer to stop the daemon.  Alternatively, you can kill the daemon process using the Terminal application or Activity Monitor.
    That most likely is just a rename of the trojan known as MacDefender. Do not download it or allow it access to your computer.

  • What should I know about upgrading processors?

    I recently bought a 400 MHz Gigabit Ethernet on eBay (still hasn't come yet). I've looked into processor upgrades and know they can be done, but not how to tell which processors will be compatible. I want to say that the Gigabit' uses a ZIF socket, but I can't remember where I might have heard that. So, please tell me whatever I might need to know about processor upgrades.
    Also, can this unit take a second processor? I know other Gigabit Ethernets shipped with them, but the 400 MHz only shipped with one and I don't know if this one is actually capable of taking two. If it is, feel free to tell me what I could also need to know about that.

    OWC has a service where you can punch in your model and upgrades only for it show up.
    G4 Gigabit 400mz (2000). I bought an OWC 1GHz CPU from there for my G4 Gigabit. works great....it was a clearance item and I see they don't sell them anymore.
    DALE

  • How should I go about getting my iPhone headphone jack repaired?

    So recently my headphone jack has been playing up, where it ends up with loads of static and the vocals are oddly quiet and echoey, but it seems to correct itself if I jiggle the jack around a little, which obviously must be damaging, so I've stopped doing it. I bought the phone from Carphone Warehouse in September and was wondering how I can go about getting this fixed? I didn't take out any apple care or anything, but surely I'm still covered by some sort of warranty? If not, how much will Apple charge for this to be repaired/replaced?

    The warranty is 1 year. If it's less than a year old, and there are no visible signs of damage, then it should be covered under warranty. If it is more than a year old, then you should be able to get an out of warranty replacement from Apple ($149 in the U.S. You'll have to check on the price in the UK).
    Make an appointment at the genius bar at your local Apple Store.

  • What should I know about the recent virus on apple products?

    To Whom can best help,
    I recently learned about the recent virus that infected more than 500000 computers.  I heard many talk about the software apple uses as the safest software available.  However, now that I own a few products from apple, this recent virus that got ahold of some personal information has me wondering what is the best route to protect cell phones, ipods, ipads,  and macbooks?  is there an AV recomended?  It would be great to get some adivce from apple techies. I tried looking up some information on the recent problem that had happened, I was hoping it would be addressed on the primary page of apple but found it wasn't.  I am just a little paranoid about people accessing my info and try my best to stay ahead of the virus/trojans and stuff.  for these electronics are there any really really amazing security apps people would recommend?
    sincerely, a concerned customer

    First, it's not a virus but a trojan. We mostly recommend ClamXav 2.2.4 as anti-virus software for OS X.
    Two Helpful Links Regarding Flashback Trojan
    A link to a great User Tip about the trojan: Flashback Trojan User Tip
    A related link in the tip to a checker: Malware Checker Dowload Link
    A Google search can reveal a variety of alternatives on how the remove the trojan should your computer get infected. This can get you started.
    The trojan attachs through Java. If you don't have Java installed then you won't be affected. Java is not installed with Lion.

  • Switching from pc to a MAC!! What should I know about iTunes switching??

    Well I am finally getting a Macbook Pro. What I need to know is: I have an iPhone and use my pc for syncing. I am getting rid of my pc and getting a macbook. The macbook will be my main iTunes server. Should I save any iTunes files from my pc before I make the switch? Or will I just install iTunes on the mac and sync?

    welcome to the bright side of computing, kw83028 !
    these reads will help with the transition: one and two.
    if you have an iPod, you may find this post by Zevoneer helpful.
    good luck !

  • What should I know about transitioning from original iPad to New iPad?

    I'm about to set up my new iPad -- I have an old, first generation iPad. What do I need to know?

    What sort of thing do you want to know ? If you want the same content on the new iPad as you've got on the old one then copy all purchases off it to your computer's iTunes via File > Transfer Purchases and then do a backup (right-click the iPad device on the left-hand side of iTunes), and then restore that backup onto the new iPad (you will need to enter email, router and other passwords on the new iPad, the restore won't copy them onto it)

  • What should i do after format my imac and return to my Creative cloud account

    I try renew again but got only trial version

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • I have insurance through apple for my iPhone 4. Last night my phone was stolen. Am I covered under insurance to get a new phone? And how much will it cost? Second- what should I do about it? I don't know if I should shut down the phone or what?

    I have insurance through apple for my iPhone 4. Last night my phone was stolen. Am I covered under insurance to get a new phone? And how much will it cost? Second- what should I do about it? I don't know if I should shut down the phone or what in case my iPhone is able to be located or what not?

    Jonryan21 wrote:
    I have insurance through apple for my iPhone 4.
    No, you simply do not.  Apple does not sell insurance.
    Apple offers an Extended Warranty called AppleCare.
    Warranties doe not cover lost or stolen devices.  Buy a new one.

  • Hello, My iph5s screen cracked according an accident I just had it since February with threeG mobile network , I have been told I can replace my phone or get it fixed by apple for free, can you please let me know what should I do about this matter ?

    Hello, My iph5s screen cracked according an accident I just had it since February with threeG mobile network , I have been told I can replace my phone or get it fixed by apple for free, can you please let me know what should I do about this matter ?

    Oh well that's what I heard because it's about the 90 days warranty ,,. Anyway can you please tell me what I can do to get it fixed ? It's a not really big crack in the right bottom side of the screen

  • Getting a PowerBook: What should I know?

    I'm almost positive that I'll be getting a PowerBook (15") within the next month or two. What should I know? I'll be moving from an iMac FP, so I'm used to a desk keyboard and MX1000. I'll get over the change. Are there any amazing laptop-centric utilities (I had a vision of tapping the corners of the trackpad to act as right, center, Exposé, etc. mouse buttons… cell phone interaction... battery monitoring)?
    I'm a student. I'm used to carrying around a backpack with notebooks, textbooks, etc.. What would be the best way to carry the PowerBook? Does the battery last long enough for a day of school or should I bring the power adapter?
    I'm just looking for any wisdom of experience from the Discussions community. Since you all secretly want points, the most helpful response gets the "answered" star, and the next most helpful get "helpful" stars.

    Just wanted to throw in a plug for my case because a) it's very useful/convenient and b) I get tons of compliments. It's a black Timbuk2 quilted laptop sleeve, but on Timbuk2's website (Timbuk2.com) they sell a variety of models, colors and sizes. I like this particular model primarily because, as I am also a student, I am able to put my 15" PB in the case and then just put it in my backpack with all my other books without worrying about scratches, etc. It's not something extra you have to lug around in addition to your backpack. Happy shopping (and hey, if you buy online you can avoid the crowds!).

  • Hi I need help. Does anyone knows joel brotonel? I bought an iPhone from him because he said he is working in apple warehouse. He tricked me. I just want to ask what should I do to get my money back?

    Hi I need help. Does anyone knows joel brotonel? I bought an iPhone from him because he said he is working in apple warehouse. He tricked me. I just want to ask what should I do to get my money back?

    thanks for advice but my problem is im far from him, i just met him online he has gained my trust. i dont know where can i complain. or to whom should i complain.

  • I cannot install Photoshop Elements 2.0 on the iMac I got last year. I have been using the PSElements on my PC OK. What should I do besides getting the latest PSElements?

    I cannot install Photoshop Elements 2.0 on the iMac I got last year. I have been using the PSElements on my PC OK. What should I do besides getting the latest PSElements?

    I think PE 2 only worked as far OS 10.3 Panther. There is no alternative but to get the version that works on your 10.7 Lion Machine, which I think is PE 6 or higher.

Maybe you are looking for

  • Invoking a webservice from Oracle ODI 11.1

    Hello there, new to this forum but I am having trouble invoking a webservice from a package within ODI. The error message I am recieving is as follows. com.sunopsis.wsinvocation.SnpsWSInvocationException: javax.xml.ws.WebServiceException: java.lang.E

  • Problem with that: 'MOLKPO+Calibri'.

    Someone can help me with that? I can´t open a file with Adobe Reader from my emial because I received the next mesage: No se puede extraer la fuente incrustada 'MOLKPO Calibri'. Algunos caracteres podrían no mostrarse o imprimirse correctamente. Than

  • Error when creating security configuration

    I am trying to create new security configuration via Web Service administration. I clicked on Add for adding users but I was getting this exception JBWEB000309: type JBWEB000066: Exception report JBWEB000068: message JBWEB000069: description JBWEB000

  • Can CHARM be setup to ignore Invalid  Component Version?

    Hi Gurus. Our SOLMAN Prod is on version 7.0 SP 25 and I'm trying to activate a new system to use the CHARM for transports. Can CHARM be configured to take  u201Cignore Invalid  Component Versionu201D  as a default import option like  u201CLeave Trans

  • Midi stops working in Logic 9.1

    When using Logic 9.1 I have been having midi crashes that require me to restart Logic. All Audio files will still play but I cannot play any 3rd party or Logic softsynths. I am getting a midi signal from my keyboard to my MOTU Ultralite interface but