What should I pay attention to do a successful client copy ?

I do the remote client copy successfully , I see the message"remote client copy complete" in SCC3. but the developers say they can not do the post.
so , I want to have your advices about how to do a successful copy. what should I pay attention to. thanks a lot

Dear Victor,
Please specify the following things to help us analyze your situation.
1. Your system landscape
2. Your source and target system while doing the remote client copy.
3. Also why you did client copy and more details about the problem that your developer is facing.
Then only we can guide you.
Regards,
Ashutosh

Similar Messages

HT201272 When trying to download a purchased movie to my library in order to sync to my iPad. I am told "There is a problem downloading error -39." What should I do to make the download successful?

When downloading a recently purchased movies I was unable to add it to my library. I was directed to an error -39 tab, unable to download check conection to network. What should I do to fix the download problem?
Thanks,
Matt Harris

Hi Matt!
I have found a couple of articles that will have relevant information about your issue. The first is about possible iTunes Store errors, and it can be found here:
iTunes: Possible iTunes Store errors
http://support.apple.com/kb/ts1424
The specific error you are speaking of (-39) leads you to this article, which is about advanced iTunes Store troubleshooting:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks for using the Apple Support Communities!
Cheers,
Braden

What should be the client url for managed servers in a cluster

Hi guys,
I have created a cluster(cluster_1) having 4 managed servers. 2 managed servers on my machine(IP1) and 2 managed servers on other machine(IP2).
I am able to deploy a xxx.war file on my admin server
also
I am able to deploy the same war file on my cluster
When I try to hit the client url, it gives me back the correct data, but it creates the session on the admin server and not the cluster.
If I remove the xxx.war file from the deployment(deployed on admin server) and redeploy the xxx,war file on the cluster, it gets deployed successfully , but the client url gives me a 404 error.
What should I do, so that after hitting the client url, it creates the session on the managed servers in the cluster ?
My admin server is not the part of this cluster.
cluster ip:127.0.0.1
ip1: 10.25.63.130
ip2: 10.25.63.131
please help
Salil

Hi Salil
This is exactly what I mentioned in my earlier post. You CANNOT and should NOT expose the managed server url (host, port) to the end users. Because as you already figured out, you can specify only one. Or they cannot try one at a time like that.
This is where, the Load Balancer will come into picture like Apache Web Server. After installing Apache web server, usually it runs at default port 80. So you just expose the apache host to outside world. Also most companies will have Firewalls and Apache is outside of Firewall and all weblogic servers are inside the Firewall. In apache, you configure the weblogic cluster details like the host names and ports of each managed server etc in httpd.conf file etc.
Ex: For outside users, they may try like http://apachehost/myWeb/myHello.jsp -> apachehost is the host name where Apache web server is running at port 80. NOW Apache is smart enough to do Load Balancing and Failover. If 100 users access the site with 4 managed servers, ideally each managed server will get 25 requests (load balancing). Also if 2 servers are killed, automatically, request will NOT go to them, but to other 2 live servers etc etc. Apache takes care of this.
Bottom line, please see my earlier post, and you need to have some sort of Web Server like Apache for your cluster setup.
Thanks
Ravi Jegga

TS3989 in windows iCloud Control Panel 3.0, photos checkbox grey out! what should i do?

in windows iCloud Control Panel 3.0, photos checkbox grey out! what should i do?

Have had some success with multiple computers running Windows 7, Vista, and Windows Server 2008 doing the following with iCloud Control Panel 3.1 (combination of several different remedies posted in forum):
Sign out of iCloud Control Panel
Open Task Manager and End all Apple iCloud and Photostream processes
Delete the files from the Directory C:\Users\[your user name]\AppData\Roaming\Apple Computer\Mediastream
Open iCloud Control Panel and sign in with apple ID
If Photo option is still greyed out, sign out and sign back in with iCloud email address and password.
This has worked for seven users that I support across several different windows hardware platforms. Good luck!

I am an exchange student for the year and I would like to by an iphone that i can use in France also, so I need an unlocked one but i don't want to pay to much for it... What should I do?

I am an exchange student for the year and I would like to by an iphone that i can use in France also, so I need an unlocked one but i don't want to pay to much for it... What should I do?

What do you mean what should you do? Just because you don't want to pay too much for a phone, doesn't make the price any cheaper. If you can't afford the price of an unlocked phone, then you don't, or can't, buy one.

HT5312 What the ****? I don't remember my **** security answers and I just put $35 on my iTunes account and I am not able to buy anything! I'm so mad. I answered those questions stupidly and I did not pay attention. And that extra email? I don't have a cl

What the ****? I don't remember my **** security answers and I just put $35 on my iTunes account and I am not able to buy anything! I'm so mad! I anwered those questions stupidly and I did not pay attention. And that extra email? I don't have a clue. I am seething and desperate. & I refuse to create a new account with all that mula on the line.

If you don't have a rescue email address, or you don't know what it is (you won't be able to add/view it until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

I already purchase a game and kind a deleted it when i finished playing the whole game. Now my problem is i'm trying to download it again and its asking to pay for it again. What should i do?

I already purchase a game and kind a deleted it when i finished playing the whole game. Now my problem is i'm trying to download it again and its asking to pay for it again. What should i do?

I did that already i can download the game but it still asking me to pay for every level even thou i pay already for the whole thing.

TS1702 it says that i have to pay again to download a game from itunes.. how can i get the game in my itunes and phone? do I accept the charges and it will be re-embersed? what should I do? I have the order confirmation number etc. if you need.

it says that i have to pay again to download it from itunes.. how can i get the game in my itunes and phone? do I accept the charges and it will be re-embersed? what should I do? I have the order confirmation number etc.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I bought 3 films and none of them had subtitles or alternative languages: why? I paid full price (like a dvd) without the same options. Why should I pay the same price? What I want is to change languages or to have subtitles (Kung Fu Panda2 and Rise..apes

I bought 3 films and none of them had subtitles or alternative languages: why? I paid full price (like a dvd) without the same options. Why should I pay the same price? What I want is to change languages or to have subtitles (Kung Fu Panda2 and Rise of the Planet of the Apes and SpongeBob).
Pease tell me.
Best Regards

You can't change languages in any of the movies offered in the store. Some movies have subtitles but it is in the same language as the movie.
Depending on what country you are in, you may get movies in that countries native language.

Should I settle for less than what I am paying for...

A couple of months ago I upgraded to BT Infinity 1 Unlimited. The package was for speed of between 25 mb to 35mb.
As I was only getting on average 15 to 16 mb on one occasion 12.8mb. I rang and BT who sent an engineer out. On checking the HD box the engineer made improvements at the box. and now sometimes I get between19mb to 21mb. The engineer said that as the box is 436 metres away from my house I would never be able to get even the lowest speed of 25 mbps.
I have just run the BTW TEST which reads as follows
Download speed 20.90
MAX 22.9
For your connection the acceptable range of speeds is 16.3mhps--22.9mhps.
Upload speed during test 3.75mbps
Upstream rate IP profile for your line is 10mbps.
Do you think I should settle for less than what I am paying for.
Solved!
Go to Solution.

Thanks for your reply,
I have been with bt for over 40 years and have great service from them. I know a lot of other users have bigger problems.
It was just that the advert on line said 25 to 35 mhps and I was hopeing that I would not have to keep watching the little circle going round and round before opening a page.
I buy and sell racecards on ebay and most times bid on things in the last few seconds and slow turning of the pages does not help. ,

I downlaoded a app on my ipad and i decided to pay, but then i took off the app and they are still charging me, so what should i do?

I DOWNLOADED AN APP ON MY IPAD AND I DECIDED TO PAY SOMETHING, BUT THEN I TOOK IT OFF THE APP AND IT IS STILL CHARING ME,SO WHAT SHOULD I DO?

You can plea your case here:
http://www.apple.com/emea/support/itunes/contact.html

HT5557 I bought a book in iBooks but i recieved it is a foreign language. What should I do to get English and not have to pay again?

I bought a book in iBooks but received it in a foreign language. What should I do to get it in English and not have to pay again?

What languase does the book's description page in the store say that it's in ? If it says that it's in English then try deleting it from the bookshelf in the iBooks app and redownload it via the Purchased tab in the ibookstore in the app.
If it redownloads in the wrong language then try the 'report a problem' link to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If the book's description page says that it's in the language that it's downloaded in then purchases are considered final, but you can try the above 'report a problem' link or Contact site to contact iTunes Support and see if they will refund or credit you

HT1657 The movie I rented has somehow corrupted on my ipadnand won't play, all I can do is delete it but says I'll have to pay again if i download it again, what should I do.

The movie I rented has somehow corrupted on my ipadnand won't play, all I can do is delete it but says I'll have to pay again if i download it again, what should I do.

Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

Delete Overlapping requests not paying attention to filters

Hi Experts,
I have followed all the steps suggested by Chetan in the next thread to cnfigured deletion of overlapping requests.
Process Chain Delete a previous request with overlapping values
In my case I need to delete requests when the data is from the same country and the same day, so I added these fields to the filters in the DTP (I didn't put any value or variable, just added the filters). However the process chain is deleting all requests coming for that DTP and is not paying attention to my filter. What could it be?
Points will be awarded,
Regards,
Raimundo Alvarez

Hi Amruta,
Good to hear that your Overlapping Request Deletion process i working fine now
1) The difference between More Comprehensive & Overlapping (What is the difference between same or more comprehensive and Overlapping?)
If overlapping is selected then:
existing requests are also deleted from the InfoCube if the selection criteria of the new request partially or wholly overlap the selection criteria of the request to be deleted.
If More Comprehensive is selected then:
requests are only deleted from the InfoCube if the selection conditions of the new request are the same as or more comprehensive than the selection conditions of the request to be deleted.
Also do check the below link, It will be very useful
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0431c48-5ba4-2c10-eab6-fc91a5fc2719?quicklink=index&overridelayout=true
2) The index creation process should be kept after the overlapping request deletion because if it is placed after the overlapping request deletion then all the overlappings will be removed and then the create index process will take less time to create index for only required request else more time will be taken to create indexes.
In case if the create index step is included before the Overlapping Request deletion then the performance will decrease instead of increasing..
Instead you have option of including BIA indexes in case if the reporting performance needs to be improved.
Please change the status of question to answered in case if all answers are received...
Thanks
Pawan

Uploaded through Bridge CC photos from my camera; went through the motions, not paying attention, bu

Uploaded through Bridge CC photos from my camera; went through the motions, not paying attention, but it did NOT save 'em where I usually save 'em; how can I ask Brindge or just the Mac Finder the last files I downloaded & where I saved 'em too? Oh, yeah, it ERASED the photos from my camera. I basically just need to ask my Mac (OS 10.8) where I downloaded 'em to. Thanks!

Uploaded through Bridge CC photos from my camera; went through the motions, not paying attention,
I'm not sure I do follow this, what do you mean with motions? can you specify this?. I assume you used Photodownloader? BTW, Not paying attention is usually not the best way when importing images...
but it did NOT save 'em where I usually save 'em; how can I ask Brindge or just the Mac Finder the last files I downloaded & where I saved 'em too?
When you import files they are written to your disk and therefor no need for save them, the files are already at your disk or written to the location you choose as destination. You could select your computername in the navigation column and then use the list view and choose the column last modified but this is not always showing the correct result. You could also do a spotlight search (or use the free Easy Find you can download from Devon) and choose to search for the extension you have shot your files in (Raw, jpeg??) and then choose modification date to sort.
There is not a log (at least not to my knowledge) that keeps track of all of your movements unless you have installed such application (don't know if there is one but I think there will be a thrid party or script written by someone). You could try Console (in the utilities folder) that holds your logs and reports but this is usually for crash or forced quit situations.
Oh, yeah, it ERASED the photos from my camera. I basically just need to ask my Mac (OS 10.8) where I downloaded 'em to. Thanks!
Well, this would mean you would have first select the option to do so in Photodownloader. While I use PDL on a daily base I always thought this option should not even be present to choose and you certainly should not use it to delete originals.
Like Curt already stated you have to use the camera software for this with the card in the camera. Either delete but preferable format the card. Mind you, this should not be done before you are sure where your files are written to and after you have checked randomly to see if the previews have build correctly for the newly imported files. Then you should make a back up of those files and only then start thinking about erasing or formatting the card for new use.
If you have not done very strange things (like choosing the card as destination but if so they might still be there- check finder in column mode- or wrote them to an external disk - where they also still should be) the files should be somewhere at your system. Just do an extensive search and if the files are really important check for recovering software for your card.
And follow the steps described above for importing, sometimes we need to learn our lessons the hard way (and I have been there too...)

What should I pay attention to do a successful client copy ?

Similar Messages

Maybe you are looking for