What should I send for battery replacement?
I'm sending mine in to have the battery replaced -- 3rd gen w/ dock connector. I got an email saying where to send it, but not WHAT to send -- the iPod alone? The Dock Connector? Other Cables? Help -- I want to ship ASAP so I can get it back soon.
Also, how long does it usually take to get back from the day you ship it??
PC Windows XP
Thanks -- I assume as long as I wrap it up well with bubble wrap and put it in a box, that's okay? AND MARK FRAGILE, OF COURSE!
USPS priority mail with tracking okay too??
Similar Messages
-
Hello, I live in Montenegro and I bought used iPhone 5 off ebay few months ago. Phone is sim free but I notice really poor battery life. I have to charge it twice a day! Before 5 I used iPhone 4 and I had to charge every night but I could use the phone all day and I was fine with that. I checked and my iPhone is eligable for battery replacement program but there are no Apple Stores in Montenegro. There is T-Mobile which sells iPhones but I didn't buy mine over there. Is there a way for me to take advantage of this program? Can I get Apple to send me new battery and I will have local repair shops (which are very good) to replace the battery? I am ready to take full responsibility for that. If that is not an option could I visit apple store in US (example) and change my battery there for free, given that it is not bought over there?
This is how you get Service in your Country
The iPhone support site has troubleshooting articles to help you solve your iPhone issue on your own. If you have reviewed those articles and still need service for your iPhone, you can contact your carrier.Note: There may be a fee for diagnostic service. Please do not send any accessories with your iPhone because they will not be returned to you.
However the iPhone could have come from anywhere in the world since you purchased secondhand from eBay
You are correct T-Mobile will not touch the iPhone .
If you check the model number in settings>>>general>>>about >>>Model
if you google that number you will find out where the iPhone originated .If an EU country then you would be eligible for assistance in any other EU country
if not then which ever country comes up is the only source of help
This version of the link above is a European version maybe more relevant
https://ssl.apple.com/uk/support/iphone5-battery/as it links in the EU coverage -
Should I ask for a replacement or stick it out with a third repair
The first repair must have been August 8th or 9th. It had the moo issue, the lid creaked, and when I shut my computer down and closed the lid (after the screen went black) the indicator light would remain on and when I came back to the computer it would be searing hot.
All they did was replace the fan with a Sunon fan. The night I received it, nothing changed. So I sent it in again. This was August 18th when they received it. They replaced the heat sink . I got it back on Thursday (just passed) and the lid was better for a day, it now creaks. It mooed, so I just did the SMC update (which fixed the mooing completely). The shutdown issue happen again too. And NOW, the whole right side of the trackpad's button is not only mushy, but nonresponsive. The right side just doesn't work. Should I send it in for yet another repair? Should I ask for a replacement? Should I be grateful it doesn't have the wretched Random ShutDowns? What's the concensus? I'm on holding with AppleCare now waiting for the next available representative (as I have been for the past 14 minutes).An update in case anyone is the least bit interested;
I asked for the replacement. The lady (Ashley) transfered me to a technician or specialist or some other euphemism for second tiered employee named Tim. Tim suggested I go into an Apple Store and have them do the repair there. That night, I experienced the "waking from off syndrome" again and figured I'd have to mention this to them as well. Did that at the store and they decided they were going to send it off to Memphis yet AGAIN. Definitely not what I was told by Tim. He said they would fix it in store. He said they'd probably hold on to it for a few because they didn't have any replacement top cases to fix the trackpad button, but he said nothing of them sending it back into Flextronics (who, I'm convinced, are quite incompetent; they're the ones who broke the trackpad button). I know they're going to muck this up again. This time, I think they're going to replace the logic board. Illogical! I don't suppose it will help, but I could be wrong. Iffin' I experience another wake from off incident after I get the thing returned, what's the liklihood of Apple replacing my machine with a new MacBook (versus not replacing it or replacing it with a refurbished machine)?
I'm fed up. Macs don't necessarily just work. They potentially frustrate.
Sorry for the quasi rant -
What should be done for this ?
hi ,
here is my question ..my xml will have
<Message>
<ATO>
<somefiled="X" type=int value=35 />
</ATO>
<FIX>
<somefiled="Y" type=String value=50 />
<FIX>
</Message>
Now first i have to parse this xml ..then my java program is going to accept value from user ..and depending on user specified value i've to use either ATO or FIX fields...e.g if user value is 35 then my program should use fields within ATO node.
what should be done for this ..
and what if i change values in my xml file..will i have to restart my application to load xml again ?I have changed your XML to make it well formed. Please refer this further in this reply.
Well Formed XML:
<Message>
<ATO somefiled="X" type="int" value="35"/>
<FIX somefiled="Y" type="String" value="50"/>
</Message>
daitkarsachin wrote:Now first i have to parse this xml ..then my java program is going to accept value from user ..and depending on user specified value i've to use either ATO or FIX fields...e.g if user value is 35 then my program should use fields within ATO node.
what should be done for this ..A simple XPath Query can do trick for you, it can give you ATO or FIX element according to user specified value. XPath query can be:
// replace ##user_specified_value## with value user enters.
String xPathquery= "/Message/child::*[@value='##user_specified_value##']";
daitkarsachin wrote:and what if i change values in my xml file..will i have to restart my application to load xml again ?Not necessary to restart application but you need to parse or reload updated XML file again. -
My iphone 5 is eligible for battery replacement program but I have bought it from a mobile operator in Thailand (my place) since Dec 2012.
Please advice whether I have to contact my operator or Apple Authorized Service Center. And any cost or free?bsaelao wrote:
My iphone 5 is eligible for battery replacement program
How do you know?
Please advice whether I have to contact my operator or Apple Authorized Service Center. And any cost or free?
Follow the instructions here -> https://ssl.apple.com/support/iphone5-battery/
(which is where you should have found out your iPhone is eligible) -
i bought my ipad mini 6 months ago, i found out that my ipad always hangs. what should i do? is replacement part of warranty?
It would be up to Apple whether or not to replace the device.
Try a reset ...
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, restore the iPad > iTunes: Restoring iOS software -
iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
"No batteries available" on my Macbook and not eligible for battery replace
I turned on my Macbook with AC power after returning holidays. I realized it couldn't charge itself, and the battery indicator showed "X" with "No batterries available."
I went to apple store and had genius bar, but my Macbook is not eligible for battery replacement program even though I bought it between February 2006 and April 2007.
Is there any suggestion that I can get battery replacement with free of charge ?
Message was edited by: idoidoidoidoThe life of the battery is typically around 500 full-charge cycles. See the following:
About Batteries in Modern Apple Laptops
Apple - Batteries - Notebooks
Extending the Life of Your Laptop Battery
Apple - Batteries
Determining Battery Cycle Count
Calibrating your computer's battery for best performance
Battery University -
Do I get a 1st gen ipod nano back when I send for a replacement?
Do I get a 1st gen ipod nano back when I send for a replacement? I have a black 2GB that I got from my grandfather for Christmas years ago. I want the same one(1st gen black 2GB) sent back. I didn't realize I had to send my original back until I was finished. I don't want a 6th gen, I have one already.
That's not good. I just sent mine back a few days ago. Great I want my 1st gen Nano back. I don't want a 6th gen, already have one. And that 1st gen was special. I thought I was getting a replacement. They better be willing to send back my 1st gen if I can't get a replacement 1st gen nano back.
-
What should I think for 865PE Neo3-F and 3.0 ghz?
with this mobo
MSI "865PE Neo3-F" i865PE Chipset Motherboard For Intel LGA 775 CPU
and this CPU
Intel LGA 775 Pentium 4 540J 3.2 GHz, 800MHz FSB, 1MB L2 Cache
what should I exspect for a super stable overclock? Does the motherboard have tons of options?
Im going to be de clocking the memory so I can get a higher clock speed. Let me know if you know how well the options are. Thanks.
I hope at least 3.6 (It will have extra cooling 40 degree datacenter)There's not only MSI make 775 with old chipset.
DFI even make 775 with 875 chipset. And in my country (in a mag), they complain it's faster than 915. -yes, I think it's right, no surprise-
I think it's not about OC but more about price. As the chipset is cheaper, and use AGP + DDR1, so you can still use most -expensive- part of your previous system. -
Need Help..what should i use for this
hello friends, i have to write a program which will load an xml file reader class at run time and depending on the content of xml file i'm going to generate mapping.. e.g xml file- <MyMapping> <ATO> <security type=int> </ATO> <FIX> <symbol type=String> </FIX> </MyMapping> Now i want to change the content of xml file without restarting my running application..changes should be reflected at runtime... also my xml file will contain nearly 1000 lines..so in this case which technique should i use whether i use JAXB which will give the classes of my xml file or any other ?? Also if i use JAXB whether JAXB gives classes corrsponding to my xml nodes (e.g ATO.java as per above example).
daitkarsachin wrote:
hi ,
here is my question again..my xml will have
<Message>
<ATO>
<somefiled="X" type=int value=35 />
</ATO>
<FIX>
<somefiled="Y" type=String value=50 />
<FIX>
</Message>
Now first i have to parse this xml ..then my java program is going to accept value from user ..and depending on user specified value i've to use either ATO or FIX fields...e.g if user value is 35 then my program should use fields within ATO node.
You will read the XML structure into some kind of memory model. When the user supplies a value you will search for a matching value (likely from a collection such as a map or list) and return the value in that object that you locate.
what should be done for this ..
See above.
and what if i change values in my xml file..will i have to restart my application to load xml again ?
If you change the file on the filesystem, you should simply be able to re-parse the XML file and update your in-memory model. If you instead update your in memory-model, you can serialize the model back to XML on the filesystem. Neither needs to necessarily have anything to do with application start-up (other than the fact that you would normally read in the XML model then, but updating is a separate concern, as would re-reading it).
- Saish -
I can't install any software,it said iOS 4.3,iOS 5, etc required.what should I do for this iOS....????
Connect it to iTunes on a computer and check for updates.
(74556) -
I have Mac OS X Version 10.6.8 ,I want to buy the updated operating system that puts iMessage and Facetime on my Macbook Pro. What should I search for, and then purchase, in the App Store?
FaceTime can run in the version of OS X that you currently have. To get Messageyou need Mountain Lion. The protocol used by Messages is iMeassage.
The question is does your MBP meet the specs for Mountain Lion.
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory
8 GB or more of available space -
In explorer when I go to my banks sites - I see a lock - what should I look for in Fkirefox
I have only used explorer - so I am new to this browzer. When I visit my bank or am about to use paypal I see a lock, so I know the site is secure - what should I look for with Firefox?
They've been silly and removed it.
I've posted my thoughts on this here.
https://support.mozilla.com/en-US/questions/811720#answer-227481
You now need to click on the icon on to the left of the websites address on the address bar!!!
So if you look up now you'll see mozilla.com icon on the address bar!
Edit; '''In addition this would be a workaround for FF5 to get the Padlock back!!'''
https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/ -
I need to publish a magazine in arabic and english - what should I buy - for how much to use 15 mac books for my students to use indesign?
You can only return the machine if you're within 14 days of purchase - otherwise you're just 'stuck' with what you purchased (unless you sell it, of course).
I always recommend that Retina owners order 16GB of RAM as the RAM is not upgradable - it's soldered onto the logic board.
Your call - if you're with 14 days of purchase, take it back and exchange for a 16GB model. Or sell it and buy a model with 16GB. The higher amount of memory will allow you to run far more memory-hungry apps concurrently.
Good luck,
Clinton
Maybe you are looking for
-
How to populate values of field symbols?
HI, I need to pass values into a field-symbol (defined as a dynamic Work Area) and append the values later on into another field-symbol (defined as a dynamic Table) by inserting the work area to the table. The insert statement in the screen shot belo
-
Urgent!!! Oracle 11.5.8 AP and GL Report Packages
Does anyone know where I can find Report Packages that provide sample reports for GL, AP and Fixed Assets? Please email me and let me know. [email protected] Thanks.
-
my 4s continually shows it's updating my Facebook page. It's slowing the phone down and draining my battery. any ideas on how to fix it?
-
Hi all there , by mistake my amall brother remove the cable and the imac suthdown and now i cant access any of the users any solution plllz ="( ?
-
it is the values we enter into a form and when we try to fill the form again we get those values. i want to delete those