What should the resolution and design size be for an 8' Wide by 2' Tall sign graphic?

I am creating a graphic for an acrylic sign, and the dimensions are 8' wide by 2' tall. What size should my design be to work within Photoshop CS6? Pixels or inches? Resolution? I don't want to lose resolution between design and actual print. Please help. Thank you.

If you intend to have it printed by a commercial shop, I would ask them what they would recommend.

Similar Messages

What is the best and easiest print app for the iPad and iPhone?

What is the best and easiest print app for the iPad?

Richard-
The best and easiest is to use the iPad's built-in AirPrint system with an AirPrint-capable printer. <iOS: AirPrint 101>
If you do not have an AirPrint-capable printer, all printing Apps are a compromise. I have an HP non-AirPrint printer connected to my WiFi router. The free HP App, ePrint Home & Biz works OK with photos.
Print n Share and PrintCentral each have their own browser, mail, text and photo programs that work well with the printer, but they can only be accessed from within other programs that have the "Open In" option. (So far, I think GoodReader is the only App I have with that option.)
You can run a program like Printopia or FingerPrint on your computer that will share its printer as AirPrint over WiFi. They both are reported to work well. However your computer must be on and awake any time you want to print. <Printopia for Macintosh> <FingerPrint for PC and Mac>
Fred

What is the best and most stable firmware for wrt1900ac?

I recently got the wrt1900ac and I wabt to update the firmware. What is the best and most stable firmware for wrt1900ac?

The most current version is pretty stable aside the Network Map App which is known to cause a router reboot. Linksys is aware of this and is working on fixing it. Just don't use this app.
Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
To safely update FW, I recommend doing the following:
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
My current WiFi settings that are working well are Mixed Mode on both radios, Mixed Channel width on both radios, WPA2 only. Manual channel 11 on 2.4Ghz and 149 on 5Ghz. However those channels for your use will depend on whos near by your surroundings found in the InSSIDer app and you'll need to adjust accordingly to channels that are not being used which are preferred 1, 6 and 11 or (13 for out side of the north america region) on 2.4Ghz. WPS, Media Filter and IPv6 disabled. USB Drive Share, WMM and Media Prioritization enabled. LinksysSmartWiFi is enabled along with mobile access app on Iphone 4S works.

What is the imcoming and outgoing mail server for list.ru

what is the imcoming and outgoing mail server for list.ru

Contact your email service provider for that information. It's not a Firefox support issue.

What is the guideline and/or best practice for EMC setup on ASM?

We are going to use EMC CX4-480 for ASM storage on RAC. What is the guideline and best practice for EMC setup on ASM?
Thanks for the advice!

Probably a poor choice of words. Sorry.
So basically, I have gotten further, but I just noticed related problem.
I'm using the WebServices(WS) 1.0. I insert an account, then, on a separate WS call, I insert my contacts for the account. I include the AccountID, and a user defined key from the Account when creating the Contact.
When I look at my Contact on the CRMOD web page, it shows the appropriate links back to the Account. But when I look at my Account on the CRMOD web page, it shows no Contacts.
So when I say workflow or Best Practice, I was hoping for guidance on how to properly write my code to accomplish all of the necessary steps. As in this is how you insert an account with a contact(s) and it updates the appropriate IDs so that it shows up properly on the CRMOD web pages.
Based on the above, it looks like I need to, as the next step, take the ContactID and update the Account with it so that their is a bi-directional link.
I'm thinking there is a better way in doing this.
Here is my psuedocode:
AccountInsert()
AccountID = NewAcctRec
ContactInsert(NewAcctRec)
ContactID = NewContRec
AccountUpdate(NewContRec)
Thanks,

I joined iTunes Match on my MBP and added our MBA to the same Match account. What should the iTunes Media Folder Location be for iTunes on the MBA?

The iTunes libraries on both machines appear to be in sync, though I don't know if Home Sharing or iTunes Match is to thank for the consistency. But the iTunes Media Folder locations are different on the MBP and MBA, and I don't know if they should point to the same storage location (it's been on a drive connected to our Airport for years). I also don't know what options for Copying Files and Keeping iTunes Organized should be on the MBA. I certainly don't want the media files duplicated yet the devices sharing a cloud version.
I hoped the MBA would act like an iOS device using iTunes Match in that music would stream unless downloaded. Then downloaded music would have to be managed (deleted from the MBA's iTunes) for space reasons at some regular intervals-- just like we now do on the iPhones and iPad. The library entry for the song would remain... just the locally stored file would be deleted and the iCloud download would change back to the download symbol.
But if a purchase is made from the iTunes store on the MBA, the file is stored on the local MBA machine as well as the external drive because the MBP receives the song via Home Sharing and downloads the file.

Each iTunes client will expect a discrete iTunes library location. The iTunes Match service will allow the libraries to be automatically synchronised along with any IOS devices that are also registered for iTunes Match.
Following making a secure backup for any given library it is possible, once Songs have been 'matched' or 'uploaded' to remove the local copies and play the Songs from the Cloud. The behaviour on IOS devices is different, they will download each Song as it is played.
Note: Apple is very clear that the responsibility for maintaining music files remains with the user - so it remains essential to ensure that you have your own Songs secure backed up prior to relying on the Cloud. Should there be an issue with the Cloud resulting in loss of Songs you will need your own secure backup.

What is the Optimum Dimensions (Page size?) for an iwebsite?

Dear iWeb Forum,
In 2006 I made a website using iweb. I never got around to really getting this site to where I want it to be. Now I have a bit of time and want to revamp it. I have tried to find answers to this question on other posts, but I couldn't turn anything up. Apologies if this has been answered before.
First I would like to know what dimensions (page size?)are best to use so that this website can be seen by the majority of regular-sized screens? (I mean those smaller than cinema-sized screens. I use an old 17" studio monitor and it is fine with this. But perhaps on smaller screens on computers at work (Windows) the bottom part is not visible and I have to scroll down to view this area.( I am trying to make a site where scrolling is not necessary). With this in mind what dimensions would constitute a kind of 'safe area' ?
I use iweb version 1.1.2 on OSX 10.4.6.
Here is the site as it stands now:
http://web.mac.com/gregoryclements/
Any help with this would be fantastic.
Best regards
Greg

Most Web viewers do not mind scrolling down to view content. It's as easy as hitting the spacebar on most browsers and OS's.
More concern should be placed on page width and that is a bit trickier to decide.
My surveys show more than 70% of my visitors use 1024X768 (or higher) display resolution and less than 10% use 800X600 or less.
I believe that iWeb default is 700 pixels (could be wrong as I've only made one page with it).
Unless your page design layout requires a wider display I would use the default. If your page uses lots of text (Web safe fonts) then you could increase the page width (text will wrap) so that viewers don't have to scroll down.
Key factor would be remaining consistent between pages.

What are the adm_modresname and adm_moduseruid parameters used for?

The following parameters are in the server configuration file (unison.ini).
What are these parameters used for? 

[UTL] 
adm_modresname = FALSE 
adm_moduseruid = FALSE 

These parameters accept only the default values shown above and are not
configurable. They were not meant to appear in the documentation or in the
default unison.ini file.

Please do not attempt to change these parameters.

Yes I have explored this pdf...but it doesn't tell how to use the policy from the BPM. My question is if I want to use the policies from BPM, then do I need to install the SSM ?
If yes, what are the correct steps of installation ?
I am getting the errors while configuring the Java SSM.
Is Admin in the same BEA-HOME as SSM: [default: Yes]:
Give the location of the Admin: c:\bea\ales32-admin
Enter the identity directory name which will be used: [default: CoESSM_dir]:
Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
Checking if default ARME port is free: 8000
Generating policy files based on templates ...
Checking if SSM instance already present
Checking to see if SSM ARME port is free.
Checking JDBC parameters...
Checking to see if asipassword was run...
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

What should the basic site pixel size be?

I have an issue that I need to resolve correctly, but have
conflicting information between the site designer and the site
programmer. The basic home page for the site has been designed to
be 950 pixels wide and 714 pixels deep.
The programmer is telling us to make the size only 600 deep
and wider. We did not want a long horizontal shape for our home
page, which is what the programmer is asking for.
Here is a site we like the looks of and want to keep the
shape of the content more square like this one:
http://www.hinkleylighting.com/
My main concern is that the programmer is hindering the
design of the site, but I must consider that the programmer knows
what he is talking about.
I appeal to those who know how to deal with such issues here
for advice at this point. How should I approach this so we can get
a site that 'looks' like what we want, but also give the programmer
what he needs for graphics and backgrounds properly sized to make
sense in the real world.
TIA,
Ken

As has been recommended before I would forget about height.
Why? Because
you have no idea how your user has their font display set. If
it's at
"Largest" or bumped way up in some browser, the page will be
much taller
than if it's not.
If you assume a 17" screen with 1024px width and maximized
browser viewport
as your lowest common denominator, then you would want to
make your pages
about 980px wide so as not to drop horizontal scrollbars.
Forget height.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ken Nielsen" <[email protected]> wrote in
message
news:[email protected]...
>
quote:
Originally posted by:
Newsgroup User
> Nobody should care where the site developer's screen is
set. They should
> care where the prospective users of the site have their
screens set, and
> their browser viewports set. That's it.
>
> I really buy into that comment. The audience we want to
reach with this
> site
> is the new homeowner, or home builder. These people have
newer computers
> with
> bigger monitors set at higher resolutions with more
screen space than
> would be
> indicated by the cross section of 'average, or most
users.' There are a
> lot of
> computers out their and I would say that many of them
are old and small,
> many
> are still CRT's - and that is not our audience. My view
is that our
> audience
> does not set their browser window size, but uses the
whole screen - 17"
> most
> likely.
>
> Doesn't this mean that I can design 950 x 714 deep and
assume that that
> will
> 'float' off to the upper left 1/3 of the screen, which
it is doing on
> every
> monitor we have tried it on here at work so far.
>
> This is where I simply want to tell the programmer to
follow our design.
>
> It's either that or pulling my hair out adjusting the
site design to fit
> the
> mechanical requirments of what he says is the 'norm.'
>
> Such a battle.
>
>
>
>
>

I get resolution warnings when I know the resolution and image size exceed

I am using images that exceed the required resolution (300 dpi) for the size used (8 1/2" x 11"). Mostly these are on full page images. anyone run into these problems?

Error -36 is I/O error, w/o specifying if the error is in the source or the target.
So, first of all, verify your disk(s) with Disk Utility, just to make sure there's no problem there.
If there isn't, then there's a problem with the download. Consult "EVE online" (whatever that might be) tech support and user forums.

What should the owner and modes for / be?

I have owner 'admin' group 'sys' mode 775 for / which doesn't look right.
Disk utility 'repair disk permissions' doesn't change this.
Console messages: 'can't create kext cache under / - owner not root'.

If the group is 'sys' and not 'system' then something is wrong.
Run this command in Terminal:
ls -aleO /
and report what it says for / (the first line with the . at the end). Also, if it contains lines immediately after it that start with a number and colon (0:), please also include those.
You should get:
drwxr-x-r-x 32 root admin
You might also have the sticky bit set, which would show as a lower-case t at the end of the posix permissions.
Did you change any permissions in the Get Info window?

What should my download and upgrade speed be for my macbook pro?

I have done alot of research on this but i can not figure out what the avery download and upgarde speed should be for my macbook pro???????????? My mac is 2 months old and has alot of memory space and is fully upragded. Please help me!

You posted in the OS 9 forum instead of the MacBook Pro forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

What should the read in/outs normally be for a Raptor?

Hi, I installed a 80g Raptor a couple days ago as my start-up disk and had to clone my old HD to the new. After keeping an eye on Act. Monitor it looks like the Raptors data in/outs is not consistently fast (it will hit 40mb/s but usually stays in relatively low numbers). Is this cause for concern or just how it operates during normal use? Is there a good way to test that the HD is running properly? Is cloning HD's a risky business? I used SuperDuper to clone from my old HD. I know its a few questions but I am considering a re-install of Tiger if the numbers aren't where they should be.
Thanks.

I would say you want to stay below 50% full. If it was a clone - and if you formatted with the Intel, not PPC APD partition option, it should be quick.
And does it in fact have 16MB Cache?
Even using 15K SCSI drives, they would often not be pushed enough to see higher numbers. QuickBench and ZoneBench are an excellent way to test, and to insure a drive is working properly, as well as there are media and integrity tests to check I/O and for bad blocks.
WD740ADFD
The older model is WD740GD.
G4 MDD WD 320 OEM 9600 1.75GB SoftAID 3 Mac OS X (10.4.7) Mac Pro "rev 2" (hopefully)

What are the /rpc/ and /ews/ folders used for in Microsoft Exchange Server?

I come across these two folders constantly when seeing the Microsoft Exchange server externally (other folders are usually /owa/, /powershell/ and /ecp/.
I've looked everywhere online I can think of but cannot find an easy-to-understand description that clearly understands it.
I notice that both folders are blocked by login boxes which are usually either Basic or NTLM authentication, why is this? Should they be hidden completely from external access?
Any help will be much appreciated, this is also my first post so apologies for any conventions I've missed.

More information here
http://blogs.msdn.com/b/mvpawardprogram/archive/2013/03/18/virtual-directories-exchange-2013.aspx
http://technet.microsoft.com/en-us/library/gg247612(v=exchg.150).aspx
DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

What is the platform and minimum system requirement for Adobe LiveCycle Security Server?

You can learn more about this by going to this webpage
http://www.adobe.com/products/server/securityserver/systemreqs.html

hi,
i have installed Adobe LiveCycle Policy Server and Adobe Document Security Manager.i followed all the steps to integrate these two.but i have this feeling that the integration didn't go on well.how do i check if it is integrated or not?moreover,LiveCycle Policy Server has an interface where we can create policies.likewise,does Document Security Manager also have some sort of an interface where we can attach documents to polices or encrpyt policies,etc.thanks in advance.
praneeth

What should the resolution and design size be for an 8' Wide by 2' Tall sign graphic?

Similar Messages

Maybe you are looking for