What should you put in the registration form

hi i was wondering what i should put in the company/organization blank of the registration form for the iphone adc if i am doing this personally and i am not part of a company or organization

You can just use your name again, if you like...change it a bit so you can tell which is being used in the store, as in this example:
Name: Kevin Kijanka
Company: K Kijanka
In any case, it isn't critical for you since you're just an individual.

Similar Messages

In accounts what should I put as the Server Name? smtp. ? thanks, Jon

In accounts what should I put as the Server Name? smtp. ? thanks, Jon

If you are talking about iCloud email you shouldn't need to put anything in. Sign in in System Preferences>iCloud and check 'Mail' in the checklist there and it should set it up automatically.
If you really want to know the server details they are listed here:
http://support.apple.com/kb/HT4864

Relay pane. What should I put?

Im confused. What should I put to the Relay pane of the Mail configuration on Leopard Server?
Should I put my LAN's subnet?
Should I put my loopback address?
What exactly is this pane used for?
Thanks

There are three fields in the Relay pane. Which one are you asking about?
If you're talking about the 'Accept SMTP relays' field, then this should be a list of IP addresses/subnets that this server should accept non-local mail for.
By that I mean that a user on your local network should be able to send a message to this server and the server will relay it on to the actual recipient's mail server.
For example, I doubt you're running 'apple.com', so ordinarily the mail server would reject any message addressed to a [email protected]
However, if the IP address of the client sending the message is in the list of relays then the mail server will accept the message and pass it on to the real apple.com mail servers.
By default this field should have your loopback address (127.0.0.0/8) as well as your local subnet (e.g. 192.168.1.0/24), but you can add as many addresses/subnets as you need.

If you bought the iPod touch from somebody and then you locked yourself out of it what should I do because the guy didn't give me his iTunes password?

If you bought the iPod touch from somebody and then you locked yourself out of it what should I do because the guy didn't give me his iTunes password?

Sounds like the Activation Lock (iOS 7) is working as designed. It determs theft since y have to know the APple ID's passward to use/restore the iPod foro use. Unless you can get the password you have a nice but thin brick. Likely the iPod was stolen

What should I put on an external hard drive?

So I have a 13" Macbook Air with a 128 GB SSD. I installed a few games and I'm now at half full. I wanted to install WoW today (I know macs aren't meant for gaming) but seeing how it takes up 20GB, I decided against it.
Now I want to get an external hard drive to put any excess stuff on there so I can free up my SSD space and install WoW and SC2.
What should I put on my external hard drive? How would I go about putting the stuff on there? Obviously it'll load slower but for example I'd put photos and music.
Can you run games from an external drive? I know it'd be best if I just left the games on the SSD for the load time and to not have any lag but I'm just wondering.
Can you run programs such as iTunes from an HDD?
Finally, can make a windows partition on the SSD and put all my windows stuff on the same HDD that I'd use for my OSX?

Yep:
http://www.cultofmac.com/172491/move-your-iphoto-library-to-an-external-drive-to -save-space-os-x-tips/

I want to host my Muse website on Dreamhost. When I publish it, what do I put in the "Host Directory" field?

I want to host my Muse website on Dreamhost. When I publish it, what do I put in the "Host Directory" field?

Hi,
I'm no expert in this but I think you:
1) first have to buy your domain.
2) Go to the > manage domain section > under the Web Hosting section Add hosting.
3) Once this is all done you should be able to access your site with an FTP client.
4) Once you are in your directory you should see the folder with your domain name.
5) Drop your published MUSE site into the folder. You should be able to now type your
URL into a browser and see your site posted online.
If this isn't clear... I would suggest going onto dreamhost and doing a chat session with them
they are really patient and helpful!
Hope this helps a little.
Steve

In a PM, what do I put in the send to field?

In a PM, what do I put in the send to field?

Hi
Send to field is where you should type a username you want to send a message to. For example, if you wanted to PM me, you'd type ATTDmitriyCM in a Send To field, then your subject and message, and send.
Please let me know if you have any other questions.
Thanks,
Dmitriy

What shall I put in the "device reference in" in the Read.vi?? for my USB-8451, where I found the name to be USB0::0x3923::0x7166::01349C20::RAW??

as title
what shall I put in the "device reference in" in the Read.vi?? for my USB-8451, where I found the name to be USB0::0x3923::0x7166::01349C20::RAW??
i put the whole name in and it keep telling me
Error -301706 occurred at NI-845x I2C Read.vi
NI-845x: The device reference is invalid. Verify that the supplied device reference contains a valid device name.
Thanks!

Chihway,
I apologize for misreading your post the first time around. Dennis is only half correct in this case. The USB-8451 is supposed to show up as a USB-RAW device in MAX, but you do not have to run the driver wizard to create an interface to it. In Measurement and Automation Explorer, select the USB-RAW device under USB Devices and create a VISA alias (I always use 8451) by typing it in the "VISA Alias on My System" box. You should then be able to use that alias for all communication. I hope this post helps a little more than the last one!
Sincerely,
Chris G in AE

Where can i locate the registration form on my MBP (Leopard) ?

ok, 1st, let me tell how this problem went, i just bought my MBP on 27 dec ( 2 days ago )
and you get this registration form at the beginning of the setup right? at that time, my MBP is still using 10.4.10 ( so basically it's tiger ) and i did the registration form ( its done and sent )
the next morning, i tried to install the Leopard which comes in the box, and after i did, the same setup was asked for us to fill it in right, ( the registration form stuffs ) but the internet was down at that time, so i thought i can cancel the registration form and do it when the internet backs up, because usually it can be located on our Home Folder, but then later, when the internet backs up, i wanted to do the form registration, but it's not there
help me!, i know i can register in the Apple's website, but i really need to know where it went? because obviously i havent register the form for the Leopard ver
thanks alot guys, hope you guys can help me out
best wishes
WiL
Message was edited by: masagaadaygbisa

ok, and i did,...
and it did take me back to the welcome screen when i reboot
hmm.. there is just 2 things after i delete the stuff
the downloaded files are gone ( but the installed programs remained, only the installer which i download is gone )
2ndly
my internet become so super crap slow ( i dont know if it's just a co-incident that the provider are having problem or not )
but apart from these 2, i have not found anything else
basically, deleting that parameters gives you back the factory default settings and also takes you back to the Leopard welcome screen, and it deletes the downloaded installer.dmg in the "downloads" folder
the updates remains the same (10.5.1) also the software updates that i downloaded are still there
and now im pretty statisfied because i know what happened, lol
and the only thing i dont like is suddenly my internet bcomes so slowww ( im afraid its the side effect, but i hope not )
what you think mr yann?

What should I do if the Clam Xav discovered trojan?

What should I do if the Clam discovered trojan?

O.F. wrote:
I did not know that they are different.... Clam Xav put this file in quarantine folder...
What was the infection name? If you don't recall, your Scan Log will have it.
Open the Terminal app (found in /Applications/Utilities/), then copy and paste the following after the "$ " prompt:
grep 'FOUND' ~/Library/Logs/clamXav-scan.log

HT1212 What if nothing is working synced or not? What should you do then?

What if nothing is working synced or not? What should you do then?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I ran out of space on my time machine because I bought a new I MAC to replace the old one. So I copied the old one on the new one and in addition to that I own a macbook. So what should I do erase the old IMAC on my Time capsule ? Shall I reset it?

I ran out of space on my time machine because I bought a new I MAC to replace the old one. So I copied the old one on the new one and in addition to that I own a macbook. So what should I do erase the old IMAC on my Time capsule ? Shall I reset it?

Go to the airport utility and erase the TC disk.. a quick erase is fine and takes less than 1min usually.
A one pass erase takes several hours depending on how big the hard disk is.. but is somewhat safer in that it tests the drive condition. I normally don't bother for a TM backup.
When you start over you should be able to fit both backups on the TC.. assuming the disk is 2x larger at least than the space used on both the MB and the iMac.
If not you can also add a USB drive to the TC, and use that for one of the computers.
The slowest one is best.. as USB is slow.. but fast enough for wireless you won't notice much.

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.

What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.

You should be able to select Force Quit from the menu beneath the Apple icon in Finder
and choose to Quit iPhoto from there, without messing up the Mac OS X in the process.
OS X - Support
Not sure if rebuilding the iPhoto library would help this issue. However if you had to
turn off the computer without the correct method (unplug, etc; instead of menu choice)
the system may have accrued damages and should be checked, maybe repaired by
use of the Disk Utility in the system. Or restart the computer in Safe Boot mode, then
run 'repair disk permissions' while it is running in that reduced mode; then restart after.
•Understanding Safe Mode - tuts+ computer skills tutorial:
http://computers.tutsplus.com/tutorials/understanding-safe-mode--mac-59897
•OS X: What is Safe Boot, Safe Mode?
Suggestions on how to use Safe Mode in article, to resolve issues, may be helpful.
There likely are other means to rectify troublesome applications, including reinstall.
Be sure to backup your music, image, video, and other work on an external drive
or suitable device as a precaution against loss should there be a hard drive failure.
iPhoto - Mac Apps - Apple Support
There should be some tips and help information using iPhoto via this tiny Support link.
Good luck & happy computing!

Edirectory ldap, what do I put in the DN String field?

Experts,
I am trying to configure LDAP authentication. I've done this many, many times against Active Directory. In AD it is usually DOMAIN_NAME\%LDAP_USER%.
This has been driving me nuts today. We are running eDirectory. I have my server's IP address and port.
What do I put in the DN String field? I've tried many combinations of TREENAME\%LDAP_USER%, nothing seems to work.
If it is more complicated than that, where do I look in NDS to figure out what I need to put in the DN String field?
Thanks!
Dan

Dan,
I'm actually surprised you had success with that on AD as I never did. I recommend you get a little lower level and use DBMS_LDAP. Here's a little sample code to get you started:
   FUNCTION ldap_authenticate (
      p_username IN VARCHAR2
    , p_password IN VARCHAR2
      RETURN BOOLEAN
   AS
      l_dn      VARCHAR2(256) := p_username || '@domain.com';
      l_bind    PLS_INTEGER;
      l_session DBMS_LDAP.SESSION;
   BEGIN
      IF p_username IS NULL
      THEN
         RAISE_APPLICATION_ERROR(-20001,'A username must be supplied');
      END IF;
      IF p_password IS NULL
      THEN
         RAISE_APPLICATION_ERROR(-20002,'A password must be supplied');
      END IF;
      dbms_ldap.use_exception := TRUE;
      l_session := dbms_ldap.init(
         hostname => 'server.domain.com'
       , portnum   => 389
      l_bind := dbms_ldap.simple_bind_s(
         ld      => l_session
       , dn      => l_dn
       , passwd => p_password
      l_bind := dbms_ldap.unbind_s(l_session);
      RETURN TRUE;
EXCEPTION
   WHEN OTHERS
   THEN
      RETURN FALSE;
END;Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen

What should you put in the registration form

Similar Messages

Maybe you are looking for