What si the best way to export Final Cut Pro X movies to YouTube?

Hi
The Share > YouTube tool is proving to be very unrelaible. Often the Share Loader comes back with the "Your password has been rejected" message when I know that the password is correct. It seems to work fine for 50% of the time but it's really frustrating.
My videos are quite large (given that they are all under two minutes they have been shot in HD and are often over 1Gb - too big for YouTube).
What is the best way of getting my movies down in size and then uploaded to YouTube?
Thanks
Stephen

Thanks for the advice guys. I'm just rather reluctant to spend more money when FCP is meant to be good at this kind of thing. It's frsutrating thet the YouTube option doesn't work, but it clearly doesn't.
I think I just need to stop being a scrooge and to buy compressor!
Cheers
Stephen

Similar Messages

  • What's the best Mac for running Final Cut Pro X?

    Title says it all. What's the best Mac for running Final Cut Pro X? I'm not looking to make a feature length hollywood film. But I'd like to be able to edit video without lag.

    Yes. Begin with the fastest processor / graphics card / and as much RAM as you can afford. (As all three will become obsolete over time.)
    I started from scratch. I have a 27-inch iMac with a 3.4 G Intel Core i7. (currently the fastest processor for an iMac) I also ordered the best graphics card--AMD Ratheon HD. I ordered 16G of RAM, but recently added more RAM to equal 24G. (OWC makes good after-market RAM for iMACs.)
    Last, I ordered a flash drive / SATA hard drive combo.  (250G on flash / ITB on SATA). The OS and all of my applications run off the flash drive. (for fast start up!)
    I put all of my media and FCP projects onto the SATA hard drive.
    Now, I had the option to order a 2TB SATA. But, I realized I can always buy more external storage as I edit more and more projects. ALSO! FCPX is GREAT when it comes to editing projects on external drives! I can segregate an entire project and its media files onto a removeable drive. I simply launch FCPX, plug in the drive and--poof!--I'm ready to edit. It sees the project and the media right away. When I'm done editing, I can then send this drive to another editor (also using FCPX) or attach it to my MacBook if I want to edit the same project in the field.
    This has worked for me. I wish you luck.

  • WHAT IS THE BEST VIDEO CARD FOR FINAL CUT PRO and MOTION?

    Hello folks,
    I have found a lot of posts regarding all kinds of troubles with ATI READEON X1900 video card.
    When I talked to people from Apple, trying to decide which videocard to install in new MAC PRO, Ati Radeon X1900 was the one they did recommand for FCP and Motion. So are there any other cards which would actually suite better for Final Cut Studio2, or is Ati Radeon X1900 really the one to go with?
    Thanks for any suggestions,
    Kootenay

    Techreport has some more information on the new 55nm Radeon (X3000) which should be another "mid November" releases, as well as an updated 8800 GT that still is under wraps.
    So seems Intel and everyone else is trying to get new products out before the end of the year, if possible.
    Drivers for graphics controllers may or may not need the work that sometimes seems to plague companies.

  • What is the best way to export the data out of BW into a flat file on the S

    Hi All,
    We are BW 7.01 (EHP 1, Service Pack Level 7).
    As part of our BW project scope for our current release, we will be developing certain reports in BW, and for certain reports, the existing legacy reporting system based out of MS Access and the old version of Business Objects Release 2 would be used, with the needed data supplied from the BW system.
    What is the best way to export the data out of BW into a flat file on the Server on regular intervals using a process chain?
    Thanks in advance,
    - Shashi

    Hello Shashi,
    some comments:
    1) An "open hub license" is required for all processes that extract data from BW to a non-SAP system (including APD). Please check with your SAP Account Executive for details.
    2) The limitation of 16 key fields is only valid when using open hub for extracting to a DB table. There's no such limitation when writing files.
    3) Open hub is the recommended solution since it's the easiest to implement, no programming is required, and you don't have to worry much about scaling with higher data volumes (APD and CRM BAPI are quite different in all of these aspects).
    For completeness, here's the most recent documentation which also lists other options:
    http://help.sap.com/saphelp_nw73/helpdata/en/0a/0212b4335542a5ae2ecf9a51fbfc96/frameset.htm
    Regards,
    Marc
    SAP Customer Solution Adoption (CSA)

  • What is the best way to export a cutterline from photoshop?

    What is the best way to export a cutterline from photoshop?
    Wie exportiere ich am am besten einen Schnittlinie aus Photoshop? Ich bekomme von einem Wort immer nur den ersten Buchstaben exportiert, obwohl alles gerastert auf einer Ebene liegt.
    Thank you! Vielen Dank!

    What are you talking about exactly?
    If you need to export vector data Photoshop is not the first choice but if you have Type Layers (without faux styles), Vector Masks or Paths it is possible.
    alles gerastert auf einer Ebene
    does not seem to make sense in this context though.

  • What is the best way to export a .csv/.txt file to a MS Windows shared folder via a scheduled job?

    What is the best way to export a .csv/.txt file to a MS Windows shared folder, when the export process is a scheduled job?

    You can't directly, as scheduled jobs can only export to server-side data stores, which can only write to the landing area. You'll need to use an external script (e.g. batch file) to move the file from the landingarea after export. You can use an external task in the scheduled job to invoke the script.
    regards,
    Nick

  • What is the best way to export a slideshow .I like to show my slideshows via appleTV on my TV

    What is the best way to export a slideshow.I like to view  the show trough AppleTV on my television.

    You don't really give us a lot of information to work with, and assume we know something about this mdeia player. The only way to get the slideshow to a media player is to export it from iPhoto. To where? Depends on the media player. Will iTunes work? Depends on the media player. Does the media player have a DVD drive? If so, then burning it to DVD with iDVD will work, but it will be standard def not HD.

  • HT204655 What is the best way to export a photo from OS X Photos to Photoshop?

    What is the best way to export a photo from OS X Photos to Photoshop?

    Just a note:  if you Option-drag the thumbnail to the Desktop you'll get the original file.  Regular dragging will get you the preview version or the edited version if it's been edited in Photos.

  • What is the best way to export a movie to avoid losing quality?

    I need to get a movie I made on a DVD somehow, but I seem to loose quality in color and overall sharpness when I take it into iDVD and burn a disc. This movie will be projected very large, so I need the best quality possible. What is the best way to export it for the highest quality?

    There's been a ton of testing reported here on this issue, but I don't think there is a consensus on the "best" method. For one thing, it depends on what you're starting with.
    In my experience with DV video and hi-res photos, it was tough to beat the result I got exporting "large" to the media browser. (Because of my DV footage, HD was not an option.) This made a H.264 file. I could only get a slight improvement by exporting via Quicktime to a H.264 file at double the resolution of the "large" file made by iMovie. Of course this took longer to export and for iDVD to encode. Overall, I'd say it wasn't worth it for the barely visible improvement. That improvement was only detectable in the slides, BTW, not in the DV video.
    Many recommend exporting to AIC, which should be an essentially lossless export out of iMovie. This is what the share to iDVD supposedly does, I got poor results with any flow that used an AIC file exported out of iMovie for use by iDVD. Never figured out why, but my results were always better if I compressed to H.264 on the way out of iMovie.

  • What is the best way to export for use on internet?

    what is the best way to export for use on internet?

    It depends. Is this for a personal web site or for a site like YouTube, Vimeo or Facebook?
    For YouTube, Vimeo and Facebook, use Publish & Share/Computer/AVCHD using one of the YouTube presets.

  • What is the best way to connect a MacBook Pro to my HiFi system ?

    Hi,
    I'm new to Apple support communities having just bought my first Macbook Pro (a 17" 2.5GHz i7 model) and this is my very first community post.
    Im a bit of a Hi-Fi enthusiast, so, with my new MacBook Pro I've taken the opportunity of completely reloading my iTunes library in high quality Apple Lossless format. Took a while but now I've completed the task Im pleased I've done it.
    My question is, what is the best way to connect a Macbook Pro to a high quality Hi-Fi preamp - my Hi-fi system is musical Fidelity, and the pre amp (an A5  CR Pre amp) and this pre amp, which has superb audio quality, only has analogue phono inputs ? 
    I'm interested to understand what both the wired and wireless connection options are. I'm guessing one option must be to use the headphone output, but I have no idea if the output from the headphone socket on my new macbook (which is presumably designed to drive headphones) would be at a suitable level for a phono line level input ?
    Ive also read a few comments about using digital connection - and my second question would be - what is the audio digital connection on my macbook ?
    Aplogies if this question has been asked lots of times before but I've looked through some previous posts and can't find any answers in simple and straightforward language concentrating on the issue of connecting a MacBook Pro to an analogue phono pre amp input ?
    Thanks in anticipation of some advice.

    What is the best way to connect a MacBook Pro to my HiFi system?
    Look at the back of the reciever and see what your connection options are, the front headphone jack is output usually.
    The Mac's  analog audio in/out ports doubles as a optical in/out ports.
    The analog won't over power your amp, it's just a headphonejack, like a powered mic, just enough power to get the signal to the destination in one piece.
    Since you have a analog amp, your stuck with inferior analog connections, however you mentioned you wish to listen to the best sound quality of your lossless music.
    To do that your going to need a decent surround sound system with Toslink optical import jacks, a Toslink stereo jack to regular Toslink adapter, Toslink cable and enable the optical output in your System Preferences >Sound
    Another method is to use a Airport Express, it also has duo analog/opical out port. Then set up the Airport Express for iTunes streaming using the Airport Utility, then in iTunes setup the lower right corner one can set the connection.
    I recommned a Harmon Kardon surround sound system, with their 100 watt satelight speakers and the 200 watt subwoofer. Enable the "concert hall" and other neat effects which will turn your 2.0 (stereo) iTunes music into 4 channel speaker sound filling the room with music and sending the lower channels to the subwoofer.
    It will likely bring tears to your eyes that you can actually hear the full quality of your music as intended, I almost quarranty you will never want listen to music on a crappy iPhone or iPod again.
    If a surround sound system is out of your budget, you can get by using the Harmon Kardon "Go Play" portable stereo and a analog stereo cable.
    If your going to use your analog amp to power reference speakers, then there are various analog adapters of all sorts to make the appropriate connections once you know what they are, check out Radio Shack online for them.

  • What is the best way to migrate my MacBook Pro to my new Imac desk top, both seem to be running OS X version 10.9.5

    What is the best way to migrate my MacBook Pro to my new Imac desk top, both seem to be running OS X version 10.9.5

    OS X: How to migrate data from another Mac using Mavericks

  • What is the best way to protect my macbook pro? should I install mackeeper? Thank you :)

    what is the best way to protect my macbook pro? should I install mackeeper? Thank you

    MacKeeper is malware that charges a fee. Do not install it under any circumstances.
    Keep your software up-to-date with Software Update.
    Don't click on links in emails, retype the URLs to be sure you know where it is sending you.
    Don't download a "codec" or program to view content on a website from the same site -- standard viewers should come from the codec developer's site, not the content site.
    Don't fall for requests from your bank or PayPal to verify your information -- they don't do it that way.
    Download Flash only from:
    http://get.adobe.com/flashplayer/
    You did NOT win any contests you did not enter, and you are not the 10,000th vistitor to any site.

  • What is the best way to import my VHS or Laserdisc Movies into iTunes??

    What is the best way for me to import my vhs movies and laserdisc movies into itunes so I can store them for my family to keep??
    Any suggestions would be great.
    If I get them into itunes I would like to be able to view them on my Apple tv via the computer.
    Can this be done???

    csnolan wrote:
    What is the best way for me to import my vhs movies and laserdisc movies into itunes so I can store them for my family to keep??
    I know this is an old thread, but I've been researching ripping my Laserdiscs to my Mac.  Did you ever get it worked out?  I've been reading here about the Grassvalley ADVC300 to capture and convert analog video to digital.  Still learning about it.  Also, here's a wiki that has a lot of information about ripping laserdiscs:
    http://www.noobelodeon.org/w/How_to_Rip_Laserdisc

  • What is the best way to backup a MacBook Pro running OS 10.4.11

    What is the best way to backup a MacBook Pro running OS 10.4.1?

    When I was using 10.4.1, which was years ago, I used SuperDuper.
    Allan

Maybe you are looking for