What size are plugs on SoundBlaster? Mic + Line In Mono or Stereo?

What size are the plugs on a Sound Blaster?
Are the Line-In and Mic Inputs mono or stereo?

H
TomBrooklyn wrote:
What size are the plugs on a Sound Blaster?
The audio sockets used on the slot cover of Sound Blaster cards accept (/8-inch) miniplugs.
Are the Line-In and Mic Inputs mono or stereo?
Line-In is stereo. Mic-In is mono.
-Dave
?[email protected]

Similar Messages

HT1366 What size are the two audio ports on an older model MacBook, not MBP?

What size are the two audio ports on an older model MacBook, not MBP?

How come if I plug one of my two jacks on a headset it seems loose. i know the single jack is supposed to be the same size, but it doesn't seem the same.
If I get the two jacks to one jack adaptor, both ends 3.5mm is that correct?

Anybody know what size are the screw's to keep place the Airport card?

Hi Folk's
Anybody know what size are the screw's to keep place the Airport card? as I got a card here that I've had sitting around and now I've set up wireless network that reach out to where my Mac Pro is located but I don't have any screw that fit arrgh !
TTFN
Subcoustic

Hi,
I purchased an Apple MB988ZM/A Airport Extreme Wireless Upgrade Kit for my 2.93GHz 8-Core 2009 Nehalem Mac Pro a couple of months ago.
The kit includes 2 screws inside a transparent pack. The description on the pack reads:
"HH111009 603-9823-A Assembly Screws China".
The screws are approximately 4.5mm in overall length, of which about 3mm is the thread.
The thread appears to be fine, and the round head of the screw takes a Philips 00 screwdriver tip.
I have checked one of the screws with my "screw gauge" (I am a very keen DIYer!), and its diameter measures 1.5mm.
Hope this helps.
Regards,
Bill

What size are hard drive caddy screws A1181?

I need to replace the HDD on this unit but don't what size screw tip I will need for the 4 torx screws on the hard drive caddy, help please?

You will need a Torx T8.

Are iPad and iPhone built in microphones mono or stereo?

That's my question.

He assumed that you were hoping the mic would be stereo. As I said, though, for most use cases, a mono mic is just fine (or even better). What use do you have in mind. The only situation in which a stereo mic would be better is if you're going to record a stage or room full of musicians playing. If you're recording voice memos, or even recording yourself playing a single instrument, a stereo mic is unnecessary.
That said, we still haven't completely resolved whether the built-in mic is mono or stereo. The tech specs on apple.com don't specify, but I am 99.9% certain that it is mono.

IMac: How to use internal built-in microphone when Bose mic-headphones are plugged?

Hi there,
I use my Bose AE2 for Lync conferences in my iMac, but the problem is that, when the headphones are plugged I seem "obliged" to use their made for iPhone/Mac mic.
The problem is that, however, the sound through this Bose's mic is terrible so the others in the conference can't properly hear me. So I just want to use the internal computer's mic, and it seems not possible when the headphones are plugged.
In that situation, Sys Preferences > Sound > Input, only shows "External microphone" and "Line in".
Meaning, what normally is "Internal microphone" automatically, when plugged, turns into "External microphone" and that's it. It's not possible to use the internal mic anymore if mic headphones are plugged.
Do you know any way to workaround this?
My OS is 10.6.8 (it's work's iMac), but I'm afraid this is not different in 10.9.X.
Many thanks in advance!

Hi, I plug in the headphones set with a regular headphones jack plug. They don't go with USB.
Thanks for answering

What indexes are created when we check dimension as line item.

What indexes are created when we check dimension as line item.
and also What indexes are created when we check dimension as high cardinality.
Where can i see that information in the system.
Answers are highly appreciated.
Regards
Kunal

Hi,
Line item means it does not have any dimension table.
High Cardinality means that the dimension is to have a large number of instances (that is, a high cardinality). Also, it is very important to indentify the line item dimension properly. E.g. Sales Order number, this will have the exact number of entries as the fact table entries. Hence, this can be created as a line item dimension. If you are not sure of high cardinality never select that. Activate this function when the dimension has is at least 10%- 20% the size of the fact table (in terms of the number of records). <b>In this case, B tree indices are created instead of bitmap indices.</b>. By default it is BITMAP but with high cardinality it is B-Tree indexing.
Hope this helps.
PB

I have 4 equal oblong shape created with borders How do I go about knowing what size the selection area is so that I can crop an image to fit. I don't want to use paste in then adjust the bounding box to suit

I have 4 equal oblong shape created with borders How do I go about knowing what size the selection area is so that I can crop an image to fit. I don't want to use paste in then adjust the bounding box to suit

What do you mean a moderator

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

Okay, I've figured it out, so I'm going to answer my own question in hopes that it may help anyone else that would like to actually be able to see what they're doing when using Photoshop CC 2014 on a high resolution screen.
1. Open Photoshop.
2. Select Preferences from the Edit Menu, then select General.
3. Change the HUD Color Picker to Hue Strip (Medium).
4. Select Interface from the Preferences menu on the left side of the dialog box.
5. Change the UI Font Size to Large in the Text area of the Preferences dialog box.
6. Select Experimental Features from the Preferences menu on the left side of the dialog box.
7. Select Scale UI 200% for high-density displays (Windows only).
8. Click on OK, then Exit/Quit Photoshop.
9. Open Photoshop and everything should be readable.

Who is online feature ; visibility of what users are in line (Excel login)

Good morning:
We are on BPC 7.5 Netweaver (not Microsoft) and need visibility of what users are on line in BPC (users logged in Excel client).
Per SDN that functionality is available in BPC 7.5 for Microsoft under the BPC 7.0 MANAGEMENT CONSOLE per http://forums.sdn.sap.com/thread.jspa?threadID=2024795
I reviewed the audit reports and table UJA_LOGGED_ON but that does not provide users logged in through Excel (seen as BPC ADMIN in BW user list SM04)
Is there any transactions/reports providing the same functionality as the "Who is online" feature in BPC 7.5 for Netweaver e.g. users on line in BPC (users logged in Excel client).?
Thank you
Catherine

Good morning
I need to have visibility of what users are online (Excel) for audit/monitoring purposes.
We are having severe performance issues and want to understand how many users are online concurrently.
In other SAP systems one can audit who is online SM04. In SM04 all BPC users logged in through Excel show up as BPCADMIN. So there is no way to tell how many users are online.
BPC for Microsoft offers a feature to find who is online. There must be a way to do the same in Netweaver?
Thank you,
Catherine

My ipod touch thinks headsets are plugged in as indicated when pressing volume control. We did a reset but that did not work. What is next?

My ipod touch thinks headsets are plugged in as indicated when pressing volume control. We did a reset but that did not work. What is next?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Pls help: How to get MIC/LINE IN device plug IN event

Dear All,
I wants to do something(say capture audio) whenever the user plugs the MIC/LINE IN device in to the port. Is there any way to capture that event same way event identification for PLUG the MIC/LINE IN device out... Please help me on this..
Advance Thanks
Message was edited by:
rsayyappan

you correctly used TO_DATE to convert a date string to a date value. for display, you can use TO_CHAR to convert the date value to a character value, giving whatever output format you desire
select e, dump(e), to_char(e,'fmMonth DDth, YYYY HH24:MI:SS AM') from
E
DUMP(E)
TO_CHAR(E,'FMMONTHDDTH,YYYYHH24:
31-MAY-07
Typ=12 Len=7: 120,107,5,31,21,10,37
May 31ST, 2007 20:9:36 PM
1 row selected.

I keep getting "missing plug-ins" when trying to open applications on websites - what is/are these?

I keep getting "missing plug-ins" when trying to open websites applications - what is/are these? I have downloaded Adobe flashplayer and was advised to, but still showing up with this message?

could also be java plugin or any plugin used on a website that you havent installed
I would try to right click the place that say missing plugin to see if it provide some sort of info as to what plugin it is under the impression is missing

What are all these light blue lines?

...and how do I get rid of them? I'm working in AICS6. I have a number of paths with images placed inside (called "clipped groups" in the Layers Palette). Running across my entire space are these light blue lines that go on and off with the "clipped group" visibility button in the Layers Palette. They serve no purpose for me and are really annoying as they are cluttering up my drawing area. How do I turn them off, preferably permanently? Thanks in advance.
MH

I hope you can see this. They extend to infinity (or at least AI's version of infinity) in both directions. If they are "smart guides" I don't see what is so smart about them nor what they are guiding. I'm sure I'm missing something useful, but I need to get this project done and right now they are just making a mess of my illustration. Thanks for your help! MH

I have a Mac purchaesd in India. Now i am travelling to USA. In India power is at 220V but in USA it is 120V (if i am right). What i need to do. Also what type of plugs are used in USA. Type A,B,C etc.

I have a MacBook Pro purchaesd in India. Now i am travelling to USA. In India power is at 220V but in USA it is 120V (if i am right). What i need to do. Also what type of plugs are used in USA. Type A,B,C etc.

All you will need is a USA adapter for your MBP power adapter since it will work in electrical environments from 100v. to 220V. It seems that a type B will be needed.
en.wikipedia.org/wiki/Mains_electricity_by_country
Ciao.

What size are plugs on SoundBlaster? Mic + Line In Mono or Stereo?

Similar Messages

Maybe you are looking for