What sized buds should I use with the Creative EP-630 Earphon

HI,
I'm new here and I am a happy owner of a creative zen xtra (had it for nearly 2 years) along with a pair of creative ep-630 earphones (which I've owned for a couple of months). My question is regarding the different sized earbuds for the EP-630 earphones. From the beginning, I used the smallest buds as it felt like the best fit and the sound seemed quite good too, except for one drawback which became very apparent during quite listening sessions, the treble seemed overly harsh and loud, and in many instances painfully so even when the volume was turned down to minimum (yes, at level ). I discovered that using the EAX environment settings I was able to to turn the sound even lower (the "living room" setting resulting in the lowest volume, which I usually turn on when listening at night) to compensate. I'm pretty sure that this isn't normal, anybody else here encountered this treble overload problem? Anyway, I managed to find the larger sized buds yesterday which I forgot about as I thought I would have no need for them. I tried the medium-sized buds which seemed to solve the problem quite a bit, but the fit doesn't seem anywhere near as snug as before, and it takes some effort to jam it down my ear canals. Are these earphones simply not for me? I think this design has great potential, should I take a step up and try the EP-635 (http://tinyurl.co.uk/zvsv) or even these (http://tinyurl.co.uk/tbph)? Anybody here have any experience with the sennheiser cx300s?
If worst come to worst, I'm prepared to fork out for one of the Shure models, but I'd rather not spend so much if possible. Are there any other recomendations?
CheersMessage Edited by Ankmin on 07-09-2006 04:4 PM

Just leave it in place and merely deactivate it using Help --> Deactivate. AAM will recognize it and it will be tied to the CCM. You can re-actzivate it using the inverse procedure after CCM has run out. Whether or not there will be any significant updates that would equal a paid point version upgrade and may prevent reactivation nobody can tell you. At worst you then would have to reinstall your original CS6.
Mylenium

Similar Messages

What brush preset should be used with the quick selection tool

I'm using Photoshop CS5 on a MacBook Air running OS X 10.8.2
I have managed to change the brush in my quick selection tool, or at least the way it looks on the screen, and I can't figure out how to get it back.
It now looks like a paint brush with light rays around it instead of the circle with the plus sign in the middle. It does not change size when the ] key is hit.
The current preset says its Quick Selection Tool Hard Round 250 1
In addition when I use the marquee tool I can not see the crosshairs when I am inside the image.
I know I messed it up :} but I don't know how and I've searched the forum and the web and I can't find a hit telling me how to set it back.
The only thing I have knowingly done is to create a preset for a dashed line and imagine in doing that I have messed up the other. I have also changed the preferences for the cursor back and forth between standard and precise but it doesn't seem to make any difference.
Thanks
Sue

You could try resetting the Tools individually or trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed.

Which wattage adapter should I use with the composite cable with my iPad?

Which wattage adapter should I use with the composite cable when connected to my iPad while watching T. V. .

Ultimately, use the power adapter that came with the iPad. But you should use any USB based power adapter that has a 10 watt/ 2 amp or higher power rating. Look close when buying a thrid party adapter, if it does not specify 10 watts/2 amps it is a lower 5 watt/1 amp charger that will not work.

What LDAP schema should I use with JMQ 2.0?

I've just downloaded the JMS 2.0 beta for Solaris and trying to set up a admin objects store with LDAP server (NES 4.12). However I cannot find a LDAP schema file to import into the LDAP server in your release. Would it be possible to send me a copy?

As far as I know, you don't need to import any LDAP schema into
Netscape Directory Server 4.12 (I assume this is what you
are using) to store the administered objects.
Are you seeing "schema violation" errors when you use jmqobjmgr ?
If that is the case, what lookup name are you using ? Does
your lookup name have the form:
"cn=myLookupName"
In most cases (it can be overriden), LDAP servers require lookup names
to have the above format.

What slide dimensions should I use so the TV screen is fully used?

I'm creating a presentation that will be displayed on a TV: 16:9 - 1366 x 768 resolution. Is that also the slide dimensions I want to use so the TV screen is fully used? Many Thanks.

Its always best to match the the pixel dimensions of the presentation to the display being used.
Inspector > Document > Document > Slide Size

What registery cleaner should I use with firefox vs 6?

A registry cleaner keeps popping up and indicates over 400 problems - Just need to know what cleaner is recommended for firefox vs 6 and how to use it -

There is usually no need to use a registry cleaner. 
If you see that poop-up while visiting websites then that is most likely a simulation that is downloaded from internet and not showing a scan done on your computer. 
The intend of such a pop-up is to get you to buy their software and you should never respond to such an alert or you will be infected by malware.
Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

What RAD tool should i use with JSP??

I would like to know what RAD (opensource) to use to work with JSP and MySQL.
If anyone could help
thank you

If you are using the Sun Java System Enterprise Studio, the Web Application Framework will provide you with all the tools you need to create a JSP/Servlet based web application that scales in performance like no other framework. Coupled with a WYSIWYG HTML editor like Dreamweaver and your RAD app dev is covered.
For MySQL, there are some really nice GuI clients out there. This is a link to the one I have used:
http://www.mysql.com/products/
If you are using the Sun Java Studio, don't forget to add the MySQL jdbc driver so that you can access your DB at development time and use the Sql Model wizards from within the Web Application Framework tools.
If your app is not concerned with serious scalability, and you are looking to build your app using the latest standards (JSF - Java Server Faces), you can download the Sun Java Studio Creator. It's more of a VB.NET/ASP like development environment with a WYSIWYG HTML form painter. Very slick. You can download here:
http://developers.sun.com/prodtech/javatools/jscreator/index.jsp
Here's a primer for Creator:
http://developers.sun.com/prodtech/javatools/jscreator/reference/techart/primer.html
The Creator forum is here:
http://swforum.sun.com/jive/forum.jspa?forumID=123
To recap, use Web Application Framework if you require the utmost in a mature, stable, and scalable web application. WAF apps can be deployed to any J2EE server.
If you require a webapp based on the latest standard JSF implementation, and dev productivity is more important than enterprise strength scalability, then Creator is a great choice.
cheers
craig

What graphics card did you use with the Asus A8AE LE motherboard?

I have an old a1210n with an A8AE LE motherboard with a PCIe x16 slot 1.0. I wish to know what graphics cards anyone has successfully run on that motherboard (see the computer model list below)? Unfortunately, what should theoretically function often doesn't. I tried an HD 4850 that produced only scrambled video, despite reading a slower hd 4830 and 4650 had worked.
Searching this board and others got me the names of some functioning cards (that are either too slow or too expensive,( I am looking for a passmark score of about 1000): 7800 oc, x1600xt, 8600gs, , hd 6850, gtx 470. I was surprised/skeptical at the last 2.
The HD 5750, 5450, 5870, 5770 failed.
At least some of the elderly hp computers that have the a8ae le:
Pavilion a1100e Desktop, Pavilion a1130e Desktop, Pavilion a1200e Desktop, Pavilion a1206n Desktop, Pavilion a1210n Desktop, Pavilion a1211n Desktop, Pavilion a1222n Desktop, Pavilion a1226n Desktop, Pavilion a1228x Desktop, Pavilion a1229x Desktop, Pavilion a1230n Desktop, Pavilion a1243w Desktop, Pavilion a1253w Desktop, Pavilion a1310n Desktop, Pavilion a1314n Desktop, Pavilion a1330e Desktop, Pavilion a1330n Desktop, Pavilion a1350n Desktop, Pavilion a1355c Desktop, Pavilion a1357c Desktop, Pavilion a1383w Desktop, Pavilion a1428x Desktop, Presario SR1020Z Desktop, Presario SR1030Z Desktop, Presario SR1601NX Desktop, Presario SR1602HM Desktop, Presario SR1603WM Desktop, Presario SR1611NX Desktop, Presario SR1614X Desktop, Presario SR1616NX Desktop, Presario SR1617CL Desktop, Presario SR1630NX Desktop, Presario SR1650NX Desktop, Presario SR1675CL Desktop, Presario SR1700Z Desktop, Presario SR1703WM Desktop, Presario SR1707WM Desktop, Presario SR1710NX Desktop, Presario SR1711NX Desktop, Presario SR1717CL Desktop, Presario SR1720NX Desktop, Presario SR1730Z Desktop, Presario SR1738NX Desktop, Presario SR1750NX Desktop, Presario SR1802FR Desktop, Presario SR1802HM Desktop, Presario SR1807CL Desktop, Presario SR1811NX Desktop, Presario SR1817CL Desktop, Presario SR1830NX Desktop, Presario SR1834NX Desktop, Presario SR1850NX Desktop
THanks!
This question was solved.
View Solution.

Hi,
I am not surprised that the AMD 5xxx cards failed. I have seen posts on the forum where these cards would not work in older HP PCs.
Open up your PC and read the label on the power supply. What is the total wattage?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

What project setting should be used in the current Premiere Pro CC to import and edit xdcam XAVC UHD content?

I cannot find a setting that is available when importing XDCAM XAVC UHD (3840x2160) 422 progressive content, shot using sLOG3, nor any other form of XDCAM 4K/UHD. There is no option for XAVC that I can find, nor is there anything under XDCAM HD for 4K/UHD like there is for REDCAM. Is there a Plugin that I need? Or does Premiere Pro CC not yet truly support Sony XDCAM XAVC yet?
The Adobe posted compatibility list for PPro CC says that it will support almost all forms of XDCAM, including RAW 4k, but the reality of what is actually now available in PPro CC appears to be another thing. I hope I just missed something? But as always, Adobe leaves you guessing at these things.
BTW, I tried the REDCAM UHD 29.97 3840x2160 setting, and after the file is imported, PPro takes a dive. That was a shot in the dark of my own, and I expected it to fail. But now I have 600+GB of files that are in limbo. Thanks Adobe chat support for not being available during the hours listed on the support pages.

Maximising performance
Optimizing for performance: Adobe Premiere Pro and After Effects
http://blogs.adobe.com/aftereffects/2011/02/optimizing-for-performance-adobe-premiere-pro- and-after-effects.html

What sequence settings should I use with multiple formats?

I'm starting a new project in CS6 that's using multiple types of video. I've got old camcorder video from 20 years ago...as well as digital video...and current HD video. I want all the video in the sequence to output as full screen. So do I need to use the 720 x 480 settings to accommodate the old camcorder video? Or will that mess up my new HD stuff? Thanks.

First you need to force Premiere to interpret the camcorder files as widescreen. So highlight all the camcorder files from the project panel, right-click and select Modify -> Interpret Footage. Then change the pixel aspect ratio to "D1/DV NTSC Widescreen 16:9 (1.2121)".
Next you need to upscale the camcorder files to the HD project window size. So after you drop them on to your timeline... highlight one or more of them, right-click and select "Scale to Frame Size".
Finally you may want to fine tune it to remove edge artifacts or borders. There's a few ways to do this but the quickest would be to just slightly increase the Scale settings in the effects control panel. Once you have a good look, you can just copy and paste the scale settings to all the other clips on the timeline.
Alternatively, you can use Red Giant Instant HD to do the up-scaling as I'm sure it do a much better job.
-Pete

What computer/model is most compatible with the Creative Suite?

I am a professional Graphic Designer and I am looking to buy a new computer. I mainly work in InDesign, Photoshop and Illustrator, but I want to be able to work fast and easily in Premiere and After Effects too. What computer/ computer model would you recommend to optimize Adobe performance?

Are you most familar with Windows PCs or Apple Macs? Most designers usually prefer Macs.
Adobe produced this guidance when CS6 was released nearly 2 years ago
http://blogs.adobe.com/jnack/files/2012/07/CS6_hardware_recommendations.pdf
The video apps are the most demanding so if you buy a system to run Premiere Pro CC and After Effects CC smoothly, the other apps will be fine. 64 bit is essential.

What lightning cable can be used with iPhone 4?

What lightning cable should be used for the iPhone 4? All the cables I have looked at do not say for iPhone 4, but for iPhone 5, etc.

Well that's really interesting, since my iPhone 4 has a lightning connector on the bottom & the charging cable sent with it is USB on one end & lightning connector on the other. BTW, I tried a USB to lightning cable my brother has been using with his iPhone 5 & it charged my iPhone 4 just fine.
Thanks for replying, though.

When I try to download apps I get this message,"This apple I'd has not yet been used with the iTunes Store." What does this mean I should do?

When I try to download apps I get this message,"This apple I'd has not yet been used with the iTunes Store." What does this mean I should do?

Yes it does give me a link. Its tell me to review my account info but when I click on review it then says I need to upgrade my iOS but I am already using the latest iOS. Any suggestions?

Every time i enter my appleID in my MacBook Pro it says-"Your apple ID has not yet been used with the app Store" what should i do?

Every time i enter my appleID in my MacBook Pro it says-"Your apple ID has not yet been used with the app Store" what should i do? i have even verified my appleID account..please help

Hey there Mark,
If this is indeed the first time that you have used your Apple ID in the iTunes or App store you do need to have a payment method the first time you set it up:
Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method
If you've already created your Apple ID, you'll need to add a payment method when you first use it to sign in to the iTunes Store, App Store, or iBooks Store. But you can optionally remove the payment methodafter you sign in to the store. You won't be asked for a payment method again until you make your first purchase.
Thank you for using Apple Support Communities.
Regards,
Sterling

When i log in my apple id in itunes a message prompt me "This Apple ID has not yet been used with the itunes store" what do i need to do?

when i log in my apple id in itunes a message prompt me "This Apple ID has not yet been used with the itunes store" what do i need to do?

If you can log into the computer, go to the Mac App Store and purchase Mavericks under your AppleID. Even though its free, they still consider it a purchase.
If you are not able to log into your Mac you can try on a different Mac. Once you purchase it, you can stop the download if you want.
Once you do that then you should be able to reinstall via the Recovery HD

What sized buds should I use with the Creative EP-630 Earphon

Similar Messages

Maybe you are looking for