What smtp port configuration should I use?

All of a sudden, I can't get my mail to go out. What port configuration should I use?  What else can be the problem?
Bob

You have to use DHCP.. there is no other option that will work because the modem is not a router.. Unfortunately apple hide any more sophisticated controls so there is nothing much you can do other than power cycle the TC when it gets lost.

Similar Messages

  • What TC internet configuration should I use so it can handle Time Warner Cable's constant changing of IP Address?

    Today is the third day that I have reconfigured TC internet settings so I can connect (again and again) to the internet. Time Warner Cable's IP seems to be changing daily. Your help will be very much appreciated!

    You have to use DHCP.. there is no other option that will work because the modem is not a router.. Unfortunately apple hide any more sophisticated controls so there is nothing much you can do other than power cycle the TC when it gets lost.

  • What Disk Allocation Units should I use, RAID0 or JBOD

    Hi, what Disk Allocation ubits should I use for drives.  The default in NTFS is 4k, is that OK or should I make them bigger?  If I use different drives to store different things should the different drives have different Allocation Units.
    I have a USB3 enclosure with 2 TB drives in it.  Would it be better to use JBOD (i.e. pass throught) so I effectivly have 2 seperate drives I can put different stuff on or RAID0 whitch gives better performance in a single volume?

    Thanks, was not sure if it should be in HW forum as it was conserning configuration of storage not chosing hardware.  Sorry about that.

  • What external Hard drive should I use for Final Cut Pro?

    Hi:
    I have a Mac Pro and I'm planning to work with HD. What external hard drive should I use?
    PD: I have a NVIDIA on a PCI Express graphic slot.
    Thanks,
    Cabezon

    You'll need to be much more specific; there are 20 or 60 different kinds of high definition. Some require nothing, some require superfast RAID, some require specialized hardware support.
    bogiesan

  • What XA JDBC driver should I use with Oracle 8i 8.1.6

    I need to use an XA JDBC driver for Oracle 8i 8.1.6. I am using the driver in
    a ConnectionPool in a TxDataSource for use by some entity beans using EJB 2.0.
    I'm running WebLogic Server 6.0 sp2, EJB 2.0, Java 2 SDK 1.3.1 Server VM, Solaris
    2.7, and Oracle 8i 8.1.6.
    I know of three different Oracle XA drivers: WebLogic jDriver for Oracle XA, Oracle
    OCI type 2 driver XA, and Oracle Thin tyoe 2 XA. Are there any other drivers
    that I can use for Oracle 8.1.6? Which driver and which version should I use?
    For example, can I use the Oracle 8.1.7 JDBC drivers with the Oracle 8.1.6 server,
    or would the Oracle 9i drivers work with the Oracle 8i server? Which drivers
    are faster, and which support more features? I assume that I should not use the
    type 4 driver since I am not using an applet, but I don't know if there are bugs
    in the OCI C library for Solaris or in the JDBC drivers that use it that prevent
    XA from woking. Which version of the Oracle C OCI library should I use if I use
    a type 2 driver?
    Thanks,
    Ross Goldberg

    Hi,
    I think you can't use the 8.1.6 thin driver for XA, you would have to
    use the OCI driver or 2PC-enable your datasource. AFAIK this has been
    changed for 8.1.7
    Check http://e-docs.bea.com/wls/docs61/////jta/thirdpartytx.html.
    Daniel
    -----Original Message-----
    From: Gene Chuang [mailto:[email protected]]
    Posted At: Thursday, August 30, 2001 2:04 AM
    Posted To: jdbc
    Conversation: What XA JDBC driver should I use with Oracle 8i 8.1.6
    Subject: Re: What XA JDBC driver should I use with Oracle 8i 8.1.6
    I've asked this question before. This is the reply from Joe
    Weinstein:
    For reliability and JDBC 2.0 compliance, I recommend the
    Oracle thin driver.
    If not that driver, you should verify that a type-2 driver
    actually does
    deliver better performance, but then I would not have a
    strong preference
    between their type-2 and ours. Theirs may be faster, and JDBC
    2.0 compliant.
    Both are succeptible to OCI bugs, some of which only they can
    fix, but we
    listen.
    Gene
    "Ross Goldberg" <[email protected]> wrote in message
    news:[email protected]...
    >
    I need to use an XA JDBC driver for Oracle 8i 8.1.6. I am using thedriver in
    a ConnectionPool in a TxDataSource for use by some entity beans usingEJB 2.0.
    I'm running WebLogic Server 6.0 sp2, EJB 2.0, Java 2 SDK 1.3.1 ServerVM, Solaris
    2.7, and Oracle 8i 8.1.6.
    I know of three different Oracle XA drivers: WebLogic jDriver forOracle XA, Oracle
    OCI type 2 driver XA, and Oracle Thin tyoe 2 XA. Are there any otherdrivers
    that I can use for Oracle 8.1.6? Which driver and which versionshould I use?
    For example, can I use the Oracle 8.1.7 JDBC drivers with the Oracle8.1.6 server,
    or would the Oracle 9i drivers work with the Oracle 8i server? Whichdrivers
    are faster, and which support more features? I assume that I shouldnot use the
    type 4 driver since I am not using an applet, but I don't know ifthere are bugs
    in the OCI C library for Solaris or in the JDBC drivers that use itthat prevent
    XA from woking. Which version of the Oracle C OCI library should Iuse if I use
    a type 2 driver?
    Thanks,
    Ross Goldberg

  • Hi, i have a A1186 Mac Pro 2008 Tower. Im running windows 7 64Bit on it. Im not sure about what version of bootcamp should i use to get the drivers. Someone please help me.

    Hi, i have a A1186 Mac Pro 2008 Tower. Im running windows 7 64Bit on it. Im not sure about what version of bootcamp should i use to get the drivers. Someone please help me.

    Boot Camp support:
    http://www.apple.com/support/bootcamp/
    Boot Camp FAQ:
    http://support.apple.com/kb/HT5639?viewlocale=en_US

  • What word processing program should I use with my Mac, what word processing program should I use with my Mac, what word processing program should I use with my Mac

    what word processing program should I use with my Mac?

    steve359 wrote:
    For free you can download NeoOffice
    Not quite. Downloading the current version of NeoOffice is definitely not free (downloading the previous version is). The developers of NeoOffice (the most Mac-like of the StarOffice descendants) make a distinction between the application itself (which is free) and downloading it, for which they require what they are pleased to call a "donation" (since it's mandatory, I would call it a fee).
    shldr2thewheel wrote:
    I totally forget about TextEdit all the time..
    Indeed. For basic WP tasks, TextEdit can be quite satisfactory.
    embauerxz
    I only need it for reports
    Would that include the report on the state of the US economy -- you know, the one President Obama asked you to deliver to the White House no later than 7AM on January 4? The one in two columns, with numbered paragraphs, table of contents, footnotes, mathematical formulae, 40 figures, 60 charts, quotations in Arabic, Japanese, and classical Greek, and 15 pages of references in APA style?
    Grant Bennet-Alder is right -- "the real answer depends on what work you expect to do with it, and with whom you expect to do this work". There are dozens of word processors for Mac, from the venerable Word to the no less venerable Tex-Edit+. It would pointless to start listing them all, when many of them might be either too little or too much for your needs.

  • What frame rate timeline should I use for 1080p 60fps premiere pro

    When using 1080p 60fps clips what sequence should I use when creating a timeline that would work the best for slow mo application?
    I read that you should use a 24 fps timeline but i'm not sure?
    Also I have a few 720 @ 120 fps, should I create a separate sequence for that and what kind of timeline should I use since cs5 only has 1080 @ 60fps option?

    24 is a good frame rate for most animations but some people like 30 and for the max stress on user systems and animation smoothness, use 60.

  • What type of restore should I use?

    My computer is properly backed up using Time Machine. I created a partition using Bootcamp so I could install Windows (I haven't actually installed Windows yet). However, after testing Parallels, which is an amazing program!, I want to get rid of the partition and use Parallels instead.
    My understanding is that I have to wipe my hard drive to erase the partition. Assuming this is true, what version of restore should I use? I want the computer to be exactly as it is in the backup, except for the partition.

    Ian Chamandy1 wrote:
    When I go into the Partition tab, the diagram and text shows my HD as having 148.73 gigs of space (it appears in blue on top in the diagram) and "available space" being 49.5 gigs (it appears in white on the bottom).
    Once you deleted the Boot Camp partition, you now have only a single partition. The light-blue shading represents the data in the partition; the white are represents the rest ("available space").
    Is this how it should be? I clicked on both the blue area and the white area but that doesn't select them. There is no line between them for me to drag. Also, the "-" and "Options" buttons are grayed out.
    If there's only one partition on the disk, the whole diagram, containing both the blue shading and white area, covering the entire disk, should be outlined in medium blue. The "-" sign is grayed-out because there's only the one partition. If there were 2 or more, you could use it to delete one.
    If you wanted to make a second partition, you would click the plus sign. DU would then change the diagram, splitting the existing partition. Then you'd see a line between the two, which you could drag up or down, etc. The Options button is used when setting-up a new or erased drive "from scratch," to specify the *Partition Map Scheme* for the entire drive.
    Browse Disk Utility's help for a general idea of what it can do. (It's one of the few apps that has fairly comprehensive explanations and instructions.)
    I should mention that I installed Parallels so I could run Windows and Mac OS simultaneously (it is quite amazing!). Could it be that Parallels creates an unlabeled partition?
    I don't do Windoze, but it's my understanding that Parallels makes one huge OSX file that contains the entire Windows system, rather than the way Boot Camp uses a separate partition. I also understand that this huge file is automatically excluded from Time Machine, so it doesn't back the whole thing up every time anything is changed. You can check this via TM Preferences > Options.

  • What you tube app should I use on my ipad2?

    What you tube app should I use on my ipad2?

    Google's official Youtube App is the recommended one.
    https://itunes.apple.com/en/app/youtube/id544007664?mt=8
    But there are many othe rApps yu can use, it depends on what functionality you want.
    Just search the store for the many alternatives.

  • What malware scanning software should I use

    What malware scanning software should I use?  Any suggestions for good free software?  Also is there a good free antivirus software too?
    I use malwarebytes & FEP for Windows 7 pc but need to know what to install of this mac.
    Thank you

    None is really needed at present.
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection I recommend using ClamXav.

  • What type of repeater should I use with my new Airport Extreme?

    what type of repeater should I use with my new Airport Extreme? Thanks.

    If you want to repeat both bands of your dual band AirPort Extreme, another AirPort Extreme would meet these requirements.
    If you only need to extend one of the bands that the AriPort Extreme provides, then an Airport Express would do that nicely.

  • What type of partition should I use? Range or Hash or ..?

    Hi,
    I am on Oracle 8.1.7.4 .
    I have a table with 10 million rows and looks like its a good candidate for partitioning.
    There is a varchar2 column and the data is evenly distributed on the string value. If I want to partition the table on that string value what type of partitioning can I use. How can I give the range, if I use range partition, on the string value ?
    Can/Should I use hash partitioning?
    I know that there is a list partitioning in O9i, but I am on 8i.
    Please help.
    Regards

    <quote>
    I have a table with 10 million rows and looks like its a good candidate for partitioning.
    </quote>
    Table volume, in itself, is not enough to warrant partitioning … hope you have some other reasons.
    <quote>
    … but would like to partition the table on the mentioned varchar2 column, so that queries would be efficiant.
    </quote>
    Since you don’t mention the actual query or class of queries, maybe it is worth mentioning that partitioning could speed up some queries but also can slow down a lot more other queries.
    <quote>
    So, how can i re-create the table partitioned on a varchar2 column
    </quote>
    No different than numbers or dates?
    create table tp
    ( str   varchar2(10)  not null
    ,fill  char(20)      not null
    partition by range(str)
    ( partition p1 values less than ('F')
    ,partition p2 values less than ('L')
    ,partition p3 values less than ('R')
    ,partition p4 values less than (maxvalue)
    insert into tp
    select substr(object_name,1,10), lpad('x',20,'x')
    from user_objects
    flip@FLOP> select * from tp partition (p2);
    STR        FILL
    F1         xxxxxxxxxxxxxxxxxxxx
    GENERATE_R xxxxxxxxxxxxxxxxxxxx
    IPSDEV.US. xxxxxxxxxxxxxxxxxxxxThe link to Tom’s article is fine … it just happens to be one of the few threads he’s not mentioning that partitioning is not the magic fast=true mechanism … look for some other articles on partitioning and you’ll quickly discover his views on this subject.
    There may be a case for partitioning … but you haven’t presented any reasonable justification for it … so, why bother?

  • What kind of motor should I use for lifting a heavy load?

    I'm working on an automation application in which I need to control a lifting mechanism with heavy load (about 120 lbs).  I will be getting constant temperature readings and based on that data I can determine the rate of change of the temperature.  If the temperature rate is too fast then I need to be able to slow down the motor, if it is too slow then I need to speed it up.  I'm looking for some support with choosing the right motor and hardware so that I have full speed control, while still being able to lift this heavy load, hold the load in a certain position, and then raise the load back to its original position.  I was considering a stepper motor for this due to its ability to brake so the load can stabilize.  Is this the right call or should I use a continuous servo?  Where can I get such a stepper that can handle this type of load and has software that interfaces with LabVIEW?  Would I be safe getting low-cost hardware for this application?  Any guidance would be sincerely appreciated.  Thanks.

    Thanks for your replies to this topic.  I just discovered the worm gear option yesterday while talking to a professor.  I think that is the route we are going to take because the DC motor won't be as expensive as a high-torque stepper or servo.  Also, I have three engineers that will be calculating the motor size based on gear reduction, spool size, cable length, and the load that we have to lift (which is about 120 lbs.).  If any of you would like to suggest a motor size, that would be great too.  I'm thinking something around 1HP should probably do it.  My goal is to stay cost-effective while making an easy apparatus.  I know that the worm gears may also be inefficient at times but it seems like the best solution for this application.  Not to mention it's not to hard for our mechanical engineers here to make the spool and bearings.  And I believe you can buy a DC motor that interfaces directly with a worm gear.  However, a follow up question is what computer hardware do I need to control the voltage of the motor so I have speed control?  Is this done through an RS232 board?  My output from the LabVIEW program will be voltages, from which device is that binary signal converted into physical voltage?  Thanks for your help so far.

  • Question About what Azure Services I should be using for mobile app with website.

    Hello,
    I am wondering what Azure service would be best for my new application. I need to have an SQL database that I can connect to and modify from both a website and a mobile app preferably WP8 and Android. I was not really understanding whether I would need a
    mobile service or normal SQL database. Which should I use or am I completely off track?
    Thanks,
    Matthias

    Mobile Services uses SQL Database, nothing special on that SQL Database, its just like any other  "normal" SQL Database.
    Mobile Services provides "back-end services" that simplifies accessing SQL Database, Notification services, authentication, etc...
    Let's assume you don't use Mobile Services, to use SQL Database, you would need your app (both mobile and web) to connect to the database. In practice, you will not want to expose your SQL database directly, so you'd end-up writing some kind of a "facade"
    that your app will access instead of directly connecting to the database.
    Instead of writing that "facade", Mobile services provides that for you (you still have to write code though, but less than what you need to write if you're rolling your own).
    Both your web app and mobile apps can share the same SQL database (pay attention to the mobile service schema).
    To help you decide, ask yourself what other features will your mobile app require? Authentication? Notification? etc... are you prepared to write those on your own or use various libraries instead of one?

Maybe you are looking for