What snmp OID to use to monitor control-plane of router

Hi there!
I've applied policy-maps on control-plane, based on cisco recomandation.
Now i need to know, what snmp OID i've to use to monitor them (i'm using zabbix)
Let me know.
Regards!

If you are using IOS which uses a policy-map to configure Control Plane Policing then you are asking in the wrong place as this forum is for IOS-XR not IOS but you can poll objects in the CISCO-CLASS-BASED-QOS-MIB::cbQosPoliceStatsTable (for example cbQosCMDropByte64, cbQosPoliceExceededByte64, cbQosPoliceConformedByte64).
If you mean you have changed the LPTS policers to help protect the control-plane in IOS-XR then I believe there is currently no support for polling the counters via SNMP. See the section on monitoring in Xander's document https://supportforums.cisco.com/document/93456/asr9000xr-local-packet-transport-services-lpts-copp

Similar Messages

Reading SNMP OID for used storage on px12-400r

Hi, does anyone know how get the correct value for used disk space via snmp on the px12-400r nas?
All capacity is configured as one big cifs share. I want to monitor the usage of space with snmp.
If I do a snmpwalk (v3) I can pinout the filesystem /mnt/pools/A/A0 on OID 1.3.6.1.2.1.25.2.3.1.3.38.
If I read the oid for StorageUsed I get a strange negative value: -1084997477
This value changes while data are written to the cifs share so it seems to be monitoring. But what to do with this negative value?
Thanks for any help!
/Anders

Hello anders-px12-400
I recommend checking with rtrevino from his thread. The unit's are different, but the firmware is bascially the same across all Lifeline devices
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

What is the Control Plans functionality in cProjects used for?

Hi Folks,
What is the purpose and usage of control plans in cProjects? Is this useful in an environment where QM is not implemented? Appreciate if somebody could provide an example of how this functionality will be useful from a project management standpoint. I am on cProjects 4.5.
Cheers,
Lashan

Hi,
the control plan functionality in cProjects is deprecated, see SAP Note 1114207:
Using the control plans is not recommended because with new
developments in SAP PLM Quality Management (QM). cProjects
remains the preferred project management solution, but all QM
aspects that are not directly related to project management
should be managed in SAP ERP.
Kind regards,
   Florian

What options we can have for monitoring SharePoint Farm till web part level?

Dear All,
I want to monitoring SharePoint Farms till web part level.
2 Farms - SP 2010 & other SP 2013
Farms are with NBL - F5 & clustered database.
Our client have enterprise licenses.
Accordingly please suggest what tool I can use for monitoring, administrating, reporting, alerting etc either
Microsoft's or any third party.
I came to know about System Center will this monitor till web part level.
Sumeet Singhal

we are using the SCOM for our SharePoint monitoring and till now satisfied, we are not monitoring the webparts as we have tons of sites collections:
but there are certain good companies which having the monitoring tools:
Idera: http://www.idera.com/productssolutions/sharepoint/spdiagnosticmanager/productdetails#
and this tool claims that they can monitor from end user's prospective. http://www.gsx.com/products/gsx-monitor-analyzer-for-sharepoint/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Monitor Controls under OS X

I shipped my old G3 iMac to my daughter in LA after installing 10.3 as I don't think it will handle 10.4. She now needs to adjust the monitor I am wonder is that still handled through the System Preferences or does she need to reboot into 9 and use the Monitors Control Panel.
iMacG3 Mac OS X (10.3.9)

Under Mac OS X, you can use the Displays pane of System Preferences to change the monitor's bitdepth, resolution, contrast, brightness, refresh rate, the geometry settings, and the ColorSync profile.
(10413)

What is the difference (& use) between CBP & MRP & FBP

Dear Experts,
Can anyone please tell me what is the difference ( & uses ) between Consumption Based Planning & Material Requirement Planning & Forecast Based Planning?
how are these linked to each other?
Instead of sending Big Documents,Please tell me in few lines in a Lay mans Language.
I read these topics in Martin Murray Book (its the Bible of MM acc. to me) but still did not understand it.
Can anyone please explain me.....
Kind Regards
Sajid

Dear Sajid,
Read This link Must help u to get all details u required
http://help.sap.com/saphelp_45b/helpdata/en/7d/c2821c454011d182b40000e829fbfe/frameset.htm
All are Used In Material Requirement Planning(MRP)
Consumtion base Planning :-   Consumption-based planning procedures are straight forward materials planning procedures with which you can achieve set targets with relatively little effort. Therefore, these planning procedures are used in areas without in-house production and/or in production plants for planning both B- and C-parts and operating supplies.
The type of order proposal which is automatically generated during materials planning depends on the procurement type of the material. For materials that are produced internally, a planned order is always created. For materials procured externally, the MRP controller has the choice between creating a planned order or a purchase requisition. If he decides to create a planned order, he must then convert it into a purchase requisition and make it available for the purchasing department.
in MRP there are three Type
1) Reorder Point Planning
     A) VB - Manual Reorder
     B) VM - Automatic
     C) VV - Forecast
2) Forecast Based Planning :- Material planning is based on forecasted requirements. This is preferred when the future requirements might not be the same as the past consumption, but to forecast, the past values are considered.
Like reorder point planning, forecast-based planning operates using historical values and forecast values as future requirements are determined via the integrated forecasting program. However, in contrast to reorder point planning, these values then form the basis of the planning run in forecast-based planning.
The forecast, which calculates future requirements using historical data, is carried out at regular intervals. This offers the advantage that requirements, which are automatically determined, are continually adapted to suit current consumption needs. If, during the current period, material has already been withdrawn from stock, then the forecast requirement is reduced by the quantity of material that was withdrawn. This means that the quantity of the forecast requirement that has already been used is not included in the planning run again.
3) Time Phase Planning :- If a vendor always delivers a material on a particular day of the week, it makes sense to plan this material according to the same cycle in which it is delivered, but displaced by the delivery time. This is possible with the time-phased planning procedure.
If a particular material is to be planned using this procedure, you must set the MRP type for time-phased planning and you must enter the planning cycle in the material master record. You enter the planning cycle in the form of a planning calendar in the Planning cycle field. You must also define a planned delivery time and the Lot-for-lot order quantity as the lot-size key.
Regards,
Pardeep Malik
Edited by: Pardeep Malik on Mar 20, 2009 11:58 AM
Edited by: Pardeep Malik on Mar 20, 2009 12:10 PM

Control Plane and Data Plane

Hi there,
I'm trying to figure out how to determine and how to differentiate between control plane and data plane especially in troubleshooting MPLS VPN. Any keyword that distinguish between them? It seems to be confusing for a newbie here :)
Thanks in advance.
maher

Hi Maher,
The control plane is simply the set of processes that are responsible for disseminating information on routes, labels etc within a network. This includes routing protocols whose job is to communicate information on routes between different routers. The information provided by these protocols is then used to building routing/forwarding tables.
The data plane is simply an abstraction used to describe the actual flow of data packets using paths determined by the control plane. The control plane traffic carries control traffic (which is not end-user data) whereas the data plane traffic is actual end-user data.
There is no single command that you can use to distinguish between the two. The commands you have on a router that can be used to view control plane operation are as such:
sh ip route
sh ip cef
sh ip bgp ...
sh ip ospf ...
sh mpls forwarding-table...
etc... and many, many more
Typically, there isn't a clear demarcation between commands that display control plane info and those that display data plane information... You could use commands such as the following to get some idea of data traffic flowing through a router:
sh interfaces
sh policy-map interface
etc.
Hope that helps - pls rate the post if it does.
Paresh

IPv6 for management and control plane on WLCs and LWAPs

Good morning, everybody!
I am trying to find answer to a question that has been previously asked by people but never successfully answered
The question is about IPv6 support on Cisco Wireless LAN Controllers and access points... Does Cisco have a roadmap to include support for IPv6 used in CAPWAP, control plane and management? There are couple of posts on this topic that do not unfortunately provide any answer to this point.
https://supportforums.cisco.com/message/3018843
https://supportforums.cisco.com/docs/DOC-15667
Infamous "Cisco IPv6 Solution" at http://www.cisco.com/en/US/partner/technologies/collateral/tk648/tk872/tk373/technologies_white_paper_09186a00802219bc_ps6553_Products_White_Paper.html briefly states "Wireless Solutions... In future, IPv6 control plane features may get added to those components."
Has anyone heard of any more specific roadmap for IPv6 support for CAPWAP, control plane and management on WLCs and LWAPs?

Full ipv6 support will never be available on the Wism and 440x controllers because they have a NPU to forward traffic and it was not designed with ipv6 in mind.
The 5508 and Wism2 and all new controllers all have CPU based forwarding and ipv6 is coming in next releases.
WLC 8.0 is only for december 2011/2012 and I have to say I don't know if it will support native ipv6.
my 2 cents

ASA 5512 - monitor power supply status via snmp oid

Device – ASA 5512 running 9.1(1).
Show version:
ASA-1# sh ver
Cisco Adaptive Security Appliance Software Version 9.1(1)
Device Manager Version 6.6(1)
Compiled on Wed 28-Nov-12 11:15 PST by builders
System image file is "disk0:/asa911-smp-k8.bin"
Config file at boot was "startup-config"
ASA-1 up 8 hours 38 mins
Hardware:   ASA5512-K7, 4096 MB RAM, CPU Clarkdale 2792 MHz, 1 CPU (2 cores)
            ASA: 2048 MB RAM, 1 CPU (1 core)
Internal ATA Compact Flash, 4096MB
BIOS Flash MX25L6445E @ 0xffbb0000, 8192KB
Issue: looking for a snmp OID to poll power supply status (Inbuilt Power Supply - no redundant power supply in this scenario). Possibly what we see in show environment.
CSE analysis:
I tried using the OIDs belonging to CISCO-ENTITY-FRU-CONTROL-MIB , like cefcFRUPowerOperStatus and cefcFRUPowerAdminStatus but it didn’t return anything.
NOTE: I have done all the snmp walks from the Linux server. Do I doubt it’s something to do from the snmp manager side.
Couple of observations. The CISCO-ENTITY-FRU-CONTROL-MIB talks about the field replaceable power supplies, so I doubt if it’s going to return the value for inbuilt power supply.
Second, I noticed that there are snmp traps supported for power supply and threshold setting. See configuration below. Is it that only traps works for power supply and environment related details?
Snmpwalk on cefcFRUPowerStatusEntry returns nothing:
[root@tonbenso-eagle bin]# ./snmpwalk -v2c -c public 172.16.169.29 1.3.6.1.4.1.9.9.117.1.1.2.1
SNMPv2-SMI::enterprises.9.9.117.1.1.2.1 = No Such Object available on this agent at this OID
Snmpwalk on cefcFRUPowerOperStatus returns nothing:
[root@tonbenso-eagle bin]# ./snmpwalk -v2c -c public 172.16.169.29 1.3.6.1.4.1.9.9.117.1.1.2.1.2
SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2 = No Such Instance currently exists at this OID
Snmpwalk on cefcFRUPowerAdminStatus returns nothing:
[root@tonbenso-eagle bin]# ./snmpwalk -v2c -c public 172.16.169.29 1.3.6.1.4.1.9.9.117.1.1.2.1.1
SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.1 = No Such Instance currently exists at this OID
[root@tonbenso-eagle bin]#
login as: root
I tried polling the ciscoEntityFRUControlMIB to see what all values it return. It just returned enterprises.9.9.117.1.3.1.0 = INTEGER: 2. Meaning cefcMIBEnableStatusNotification is FALSE (value 2). Meaning cefcModuleStatusChange, cefcPowerStatusChange, cefcFRUInserted, cefcFRURemoved, cefcUnrecognizedFRU and cefcFanTrayStatusChange are prevented from being sent.
Snmpwalk on ciscoEntityFRUControlMIB
[1]+ Stopped                 ./snmpwalk -v2c -c public 172.16.169.29
[root@tonbenso-eagle bin]# ./snmpwalk -v2c -c public 172.16.169.29 1.3.6.1.4.1.9.9.117
SNMPv2-SMI::enterprises.9.9.117.1.3.1.0 = INTEGER: 2
Object
cefcMIBEnableStatusNotification
OID
1.3.6.1.4.1.9.9.117.1.3.1
Type
TruthValue
Permission
read-write
Status
current
MIB
CISCO-ENTITY-FRU-CONTROL-MIB ; - View Supporting Images
Description
"This variable indicates whether the system
produces the following notifications:
cefcModuleStatusChange, cefcPowerStatusChange,
cefcFRUInserted, cefcFRURemoved,
cefcUnrecognizedFRU and cefcFanTrayStatusChange.
A false value will prevent these notifications
from being generated."
Found couple of bugs:
CSCty32558 – but then this is for 5585 and I see it is fixed in 8.4
CSCul90037 – New state
Show snmp-server oidlist:
http://www-tac.cisco.com/Teams/ks/c3/getLargeFile.php?srId=632222409&fileName=20141030-013905_ASA-show-snmp-server-oidlist.txt
Show tech:
Sh run | in snmp:
ASA-1# sh run | in snmp
snmp-server host asa 172.18.123.228 community *****
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps entity power-supply-presence power-supply-temperature -----à I was talking about this trap above
any help will be appreciated.

Hi
I've got an ASA with redundant power supplies. An ASA5585. So I have the need to monitor them. :-) So how can we do it?
Also I've made a SNMP-Walk through the ASA v8.4(2)8 and it doesn't show up any ENV-MIB values. The
1.3.6.1.4.1.9.9.13 tree is not available. Are you shure it's available on the ASA?
Funny is also that the command "show snmp-server oidlist" from the 8.4 configuration guide is not available on the real CLI. I think the documentation guys were faster than the coders. ;-)
Kind regards
Roberto

Mission Control useless when using multiple monitors

Background:
From my iMac I'm watching NetFlix on a 2nd TV/Monitor. The movie is playing.... On my iMac I switch to another space. Bam! The movie window on the other monitor is gone.
Conclusion:
Using Mission Control and changing "spaces" does so on all attached monitors. This is not good.
Need:
There needs to be pref in "monitors" control panel to "exlude monitor from Mission Control" functions.
Frustration:
Grrrrrrrrrrr! No more "Mission Control" as long as I'm using more than one monitor.
What say Ye?

Yes, mission control is a completely abomination on multiple monitors... I use a 4 screen setup, 1 of them is a 140 projector for movies... so i definitely understand what you mean about the movie issue.... MC isvery very limited in what could potential be a step up from Spaces... instead is a step backword...
1. no way to lock monitors (such as you are talking about with watching a movie)
2. no way to move windows from one desktop to another... Spaces was great for organization... MC is a very dumbed down version.
3. Spaces showed all "desktops montitor groups together" where the way MC splits them seems unnatural and odd to me... makes sense on single monitor, but horrible on multi monitors
4. Full screen apps are worthless with multiple monitors... it should give me the option to do full screen app on EACH monitor... this would definitely ogranization.

What happen if i use controll break statement in between select & endselect

Hi all,
what happen if i use controll break statement in between select & endselect ?
Thanks in Advance
KR

Hi for reference u can go through this code example
data:
fs_tab like sflight.
data:
   t_tab like standard table of fs_tab.
   select * from sflight into table t_tab.
   loop at t_tab into fs_tab.
     write: / fs_tab-carrid.
   endloop.
   refresh t_tab.
   clear fs_tab.
   select * from sflight into fs_tab.
     at new fs_tab-carrid.
       append fs_tab to t_tab.
     endat.
   endselect.

What cable do i use to Connect my MBP to a dell monitor

What cable do i use to connect my rMBP to my Dell monitor

Assuming the Dell monitor has an HDMI input then you need one of these:
http://store.apple.com/uk/product/H7128ZM/A/mini-displayport-to-hdmi-cable-2m?fn ode=51&p=1

HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html>

What is the best practice for using the Calendar control with the Dispatcher?

It seems as if the Dispatcher is restricting access to the Query Builder (/bin/querybuilder.json) as a best practice regarding security. However, the Calendar relies on this endpoint to build the events for the calendar. On Author / Publish this works fine but once we place the Dispatcher in front, the Calendar no longer works. We've noticed the same behavior on the Geometrixx site.
What is the best practice for using the Calendar control with Dispatcher?
Thanks in advance.
Scott

Not sure what exactly you are asking but Muse handles the different orientations nicely without having to do anything.
Example: http://www.cariboowoodshop.com/wood-shop.html

What is the use of table control in bdc is it same in module pool table con

Hi,
What is the use of table control in bdc is it same in module pool table control?
regards
eswar

Hi,
Table control means it contains as table and it will scroll in vertical and horizontal.
In module pool by using screen we can create new table control.
But BDC table control means here we can populate the data into the table control.
i.e.if you take VA01 for sales order creation in the belwo of VA01 screen there is table control for the filling of material details so here we will write the code to populate the data into the table control screen.
Thanks and regards,
shyla

What snmp OID to use to monitor control-plane of router

Similar Messages

Maybe you are looking for