What software for someone to help with Premiere Pro CS5

For the last 9 months I have been processing video using PP CS5 for a small church. The church is now recording several programs and I would like some help in processing the videos that are created. The church is small so probably can't afford a copy of the software that I have, so I will have to propose some options for them. The two that come to my mind are:
1) Adobe allows me to have two machines loaded with Master Collection CS5. Since I am only using one, I could install on another person's computer. I think this may be somewhere less than the spirit of the EULA. Besides, I am not real anxious to do this anyway.
2) Help them find a low cost alternative. I think they may be able to do this for $100 to $200 for the software. All they need to do is to trim the ends of the extra film, then add some title slides and save to Flash for the website and burn to DVD for archive. As an option, they might be able to make a menu for the archive DVD.
Anybody know of any other options or suggested low end video editing software. BTW, I took a quick look at Cyberlink PowerDirector and I could not find a way to save in the Flash format - other than creating a Youtube account and then sending the video directly to Youtube.

Colin,
You are correct. PrE will handle AVCHD on an adequate computer. It will edit, allow Titles, PiP, many Effects (too many are Auto only, however), and can Export/Share to Flash, with one big caveat - there is NO Transparency available from PrE, like from PrPro, so no sprites, etc. Just plain FLV.
The files that PrE works from will work in PrPro and vice versa. However, the use of a PrPro PRPROJ (Project file) will NOT work in PrE. A PrE PREL (Project file) might Open in PrPro, but there are a bunch of things that can keep this from working correctly: Themes/Instant Movies, some New Blue FX Effects and Transitions, etc., that are specific to PrE. Otherwise, if PrE and PrPro are contemporary, say PrE 9 and PrPro CS5, and not of that "stuff" is used, it is likely that a PrE 9 PREL will Open in PrPro CS5 - I can do that with PrE 4 and PrPro 2.0/CS2, as they were contemporaries. I cannot Open later PrE PREL's in PrPro 2.0/CS2, and only get a failure.
For simple editing (especially if one is not intending on migrating between PrE & PrPro), PrE should fit the bill nicely. Much more is done "behind the scenes," and the GUI is more of a "Big-Button" solution, than PrPro, where one has much more control, though much needs to be done by hand. There are also some MAJOR layout differences between the two GUI's, but with some training, one can go with either pretty easily.
Hope that this helps,
Hunt

Similar Messages

Need help with premiere pro cs6 having performance issues please help

need help with premiere pro cs6 having performance issues please help

Welcome to the forum.
First thing that I would do would be to look at this Adobe KB Article to see if it helps.
Next, I would try the tips in this ARTICLE.
If that does not help, a Repair Install would definitely be in order.
Good luck,
Hunt

Problem with Premiere Pro CS5 project files bloating

Has anyone had the same problem that we're experiencing? - we have Production Premium CS5 installed on a machine with Win 7 Pro x64. We have three separate edits all of which are experiencing bloating of the .prproj project file. Often this bloating seems to occur when no importing of assets has occured, just changes in the edits. A project which started at 5mb has bloated to 1.5GB and we can no longer save it. Another project has bloated to 200mb and continues to grow in size. We have not brought in any weird assets, although we are using hi-def footage.
We upgrade from CS3 and never had this problem using Premiere CS3.
We can't fix the problem by 'remove unused footage' as this doesn't reduce the project size, although it does remove the unused footage.
We can't fix it by importing the project into a new clean project as the problem and huge file size just comes with
We can't fix it by using the project manager to collect up the project as it requires to save before collecting and the problem files can't be saved.
A couple of points to note - these projects were originally on Premiere CS3 and were upgraded to CS5. The footage is either Sony EX3 or Canon 5D - both HD.
The machine it's running on has 8gb of RAM.
Currently the projects I'm working on are gradually grinding to a hold with no way to make the files usable again.
Any suggestions are greatfully recieved as I'm at a loss. I've reported this to Adobe, and will report back if I get anything useful.
thanks.

natswilson wrote:
TClark,
I'm shocked that you are having the same problem on a mac. This seems to suggest a problem that could be really widespread. You've also beaten my 1.5GB file bloat size.
What the hell is going on with Premiere Pro? I'm surprised to have heard nothing from Adobe either via my support request or on this forum, save for Jeremys useful work around, considering how serious an issue this is.
I've had to break all the projects I'm working on which have multiple timelines in each project into a new seperate project per timeline in order to reduce the file bloat problem and reduce the risk of me loosing all my work in one go on a bloated file.
Adobe - we could do with some help here. It's frustrating to have spent so much money on licences for this software only to have virtually non-existant help when a serious flaw in the software manifests itself.
Nat
Yeah...it's really a bummer that no one is acknowledging it. It's pretty serious!
I hope Dennis jumps in soon!

Adobe Audition CS5.5 with Premiere Pro CS5

Hello everybody.
I am considering downgrading from Master Collection CS5 to Adobe Production Premium CS5.5
But quite frankly it's just because of one application.
Though, i am in doubt if i'll actually going to make the downgrade.
And as you could and might have guessed it is the Adobe Audition CS5.5 Application.
Though really the whole pack has a GREAT improvement overall, I just actaully want to mix SEAMLESSLY with Premiere Pro and sound editing application (Audition).
Which leads me to my next question.
Now with Adobe Soundbooth CS5 closed off (by April 24th), and an UPGRADE for Soundbooth CS5 users to Audition CS5. Does this mean that Audition CS5.5 works SEAMLESSLY with Premiere Pro CS5?
Is there a dynamic link between the two applications? (Audition CS5.5 and Premiere Pro CS5)
AM i able to send mixes between the two? I really don't want to loose any Audio data, such as 5.1 channel mapping, volume mixing, denoising, general mixing etc.
All i really need is some good quality sound editing which works seamless, as After Effects and Premiere Pro has proved to me can be done.
Just want to know if it is possible. Or if I REALLY have to upgrade in order to get the sweet apples.
Best
Lucas

Hi _durin_
Thanks for your quick response.
But I didn't quite understand your answer.
I have seen Jason Levine's video earlier, as CS5.5 was announced and it looks natively good. I understand the mixdown attributes etc.
Please correct me if im wrong HOWEVER this workflow and settings applies still to ONLY the new CS5.5 Version?
Im currently using Master Collection CS5.
Instead of getting either the Production Premium, or Master Collection I am strongly considering updating Soundbooth CS5 to Audition CS5.5 (the option is there as i can tell by SoundBooth's website, though i get a weird error message when I click the update link...)
However I need to know, IF Audition CS5.5 works well with the PREVIOUS version (that'll be CS5 not 5.5), of Premiere Pro.
Are there an option to render the reference video, and generate a interchange session from WITHIN Premiere Pro CS5 to Audition CS5.5?
Im sorry if I either sound harsh or "willingly" misunderstanding. But I have only documentation on how the integration works between the current versions (meaning 5.5).
Im as you can guess VERY confused over the move from Adobe to make a .5 version instead of a full-fledged CS6 solution. It causes a stir, cause I then don't know much of the integration between the previous applications.
I have seen as an example that Photoshop CS5 have gotten the update to receive paintings/files made with their new touch API. So I wonder whether integrational features will be a part of the CS5 pack since, as i've mentioned, an application like Soundbooth gets replaced with Audition, with an upgrade option for the Soundbooth owners.
Im confused and hope you can help me clear my mind up, whether to upgrade or not. I will download the trial eventually, but not onto my current CS5 system since I already use this in my daily video work and want to AVOID confusion.
Best
Lucas

How can I reduce (or remove) camera shakes in a video with Premiere Pro CS5???

I want to reduce (or remove) camera shakes in a video with Premiere Pro CS5. Is there an build-in plugin I can use, or do I have to download / buy one? Thanks.

You didnt need to look very far down the page to see this...
http://forums.adobe.com/thread/619165?tstart=0

Need info about nvidia graphics card supported with premiere pro cs5

Hi
I need information about nvidia graphics card supported with premiere pro cs5
If I have a computer(portable) with this video card or graphics card :
nVIDIA® GeForce™ GTX 285M with 1GB DDR3 Video Memory available in Single or Dual (SLi) Configurations
Microsoft® DirectX® 10 Compatible
is it going to support MPE in premiere pro cs5?
Regards,
Vinay

To be clear:
You asked about supported cards. Here is a list of supported cards. Others on this thread are telling you how to make an unsupported card function to some degree using a method that is not advocated by Adobe.

Need help with Premiere Pro CS6 playback problem

Can somebody help me please? My premiere pro cs6 does not play plenty video in the time line for editing irrespective of using fast 64 bit, intel core i7, 16gb ram pc. Please what could I use to make it more stronger?
Edited by: Kevin Monahan
Reason: Changed title for better search ability.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Buying Macbook pro with Premiere Pro CS5.5 Help needed DPU?

I am gearing for film a video production. Buying the macbook pro and I PP CS 5.5. Current project I want to use PP CS5.5 rather than FCP. I am new to all this. All I want to do now is cut and sound edit with some efx matting and titles etc. Do I need a DPU right now? Is so what is a basic one low cost? (I've seen bad reviews on the nvidia) Any help would be great I am buying all this soon.
Now shooting canon 7d will convert to pros res. In the future will shoot Red.

RjL190365 wrote:
Although Thunderbolt is available on MBPs, MBPs with Thunderbolt enabled are still signinficantly slower than Windows desktops and laptops with the same CPU. This is, as Harm mentioned, due to their lack of ports offered. Even with Thunderbolt, MBPs are still available only with onboard Intel graphics or AMD/ATi GPUs (which cannot use Premiere Pro CS5.5's MPE GPU acceleration feature at all), and they do not support even two fast hard drives (the only supported fast hard drive on the MBP is the OS drive, and all of the offered external ports on most MBPs are significantly slower than the internal physical transfer speed of the OS drive). A few MBP's come with FW 800 ports, but even those are slower than the internal physical transfer speed of many notebook hard drives.
And did I mention that all versions of OSX (including the current release) are very poor at multithreading?
Who needs the FW 800 ports when you can daisy chain up to six devices through the Thunderbolt port? The MBP has one TB port and the new iMac has two TB ports. Take a look at these links:
http://fcp.co/final-cut-pro/news/212-thunderbolt-in-action-4-hd-streams-into-fcp-then-to-a -display
http://fcp.co/hardware-and-software/pro/211-lacie-are-first-up-with-thunderbolt-little-big -diskq-700mbs-and-its-tiny
http://fcp.co/final-cut-pro/news/210-apple-press-demo-shows-thunderbolt-running-4-streams- uncompressed-hd-on-the-15q-in-fcp-peaking-at-600mbs

Need help with Premiere Pro 6 media/file management!

I've been an Avid editor for 20+ years and understand media management in that world. I've recently learned FCP 7 and understand media management in that world. But for the life of me I cannot wrap my head around how Premiere Pro 6 manages media. I am looking for a very straightforward explanation, chart, anything to make sense of this. Thanks in advance for helping an old dog learn new tricks!

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Long render time with premiere pro CS5 lately, help!

lately my premiere pro CS5 render extremely slow
i have a 6GB ram 64bit windows 7
is it normal to render a 10 minutes quicktime/h264 codec in 5 hours?
please take a note that this happened recently, so i think my pc spec. should not be the problem
thanks in advance

You start off with the wrong sequence settings. To resolve that, right click on a clip in the project panel and select 'New Sequence from Clip". That will give you the correct sequence setting for your source material.
When exporting, never use QuiRcktime, since it is a 32 bit application, plagued with numerous severe problems, hence the name. Use plain 64 bit H.264 codec for exporting. If you use Maximum Render Quality, your export can take many times longer than without that checked.
Your memory and presumably the rest of your system (please give details) is not up to this task, especially not when you start with the wrong sequence settings, export with a 32 bit codec and have MRQ turned on.

Mac OSX v10.6.5: How's it working for you with Premiere Pro CS5?

If you've installed Mac OSX v10.6.5, let us know how it's working for you.
Please make sure that you're using the most recent update for Premiere Pro CS5 before you report back. We don't want to waste our time disentangling problems that were actually fixed in Premiere Pro CS5 (5.0.2) from issues that still exist.

So, here is my experience:
http://forums.adobe.com/thread/751458?tstart=0
Basically:
Premiere Pro does not want to play the timeline (or the source window) anymore. Sometime it plays for 2 minutes, sometime for 2 seconde and then stops, but most of time, it wont play at all.
I can scroll over my timeline (no sound scrolling), but when I hit space bar (or clic on the play button) I can see the play button turning into a square (which mean it's now the stop button), but the timecodes doesn't run and the image doesn't play.
So I suggest people to not being stupid as I was and to wait before to update... And hope a solution to come soon.

Closed captioning with Premiere Pro CS5.5, exported to wmv/mp4

My employer suddenly has a push to be ADA compliant, so all videos going forward need to have captioning, and would prefer to have it closed captioned. I've read that you can add captions with Encore and output them to disc, but since all of the videos are posted online, nothing is burned to disc so that doesn't help. I also know you can use scc or mcc files to add closed captions to a broadcast stream, but since these aren't for broadcast, that doesn't help either.
All of this means is that I need to add closed captioning to online video only. What I'd like to know is this: Is there any way to add closed captioning to video that will be streamed online? Or, am I doomed to putting everything into lower thirds?
I'm using Premiere Pro CS5.5 (I also have AE CS5.5).
Thanks

As a broadcast engineer, I would suspect, and it would make sense that online video files would also be encoded with EIA-608 and EIA-708 set forth by the Electronic Industries Alliance and monitored by the FCC ( Broadcast Standard ). This makes sense to me as all existing video programs which already comply with the EIA-608 and 708 standards would then, automatically play closed captioning when encoded to a video file for playback.
The FCC has recently required all online video to include Closed Captioning as per the Accessibility Act of 2010 ( FCC: MB Docket No. 11-154) Subpart 6 of this document appears to define that all devices which may playback video through the internet, must be able to support the CEA-708, or closed captioning for digital broadcast television. CEA-708 is a form of embedded data often referred to as metadata which is contained within the MPEG-2 stream.
Not to get too technical about MPEG streams, but in essence, even though your end up with a single file, there are traditionally 3 elementary streams of data contained within. Each one has a PID, or Program Identifier number which identifies the Video Stream, Audio 1 stream and Audio 2 Stream. Additional elementary streams can be added such as a data stream containing Closed Captioning- or whatever like Dolby Digital. The PID allows a Demultiplexer to split the streams appropriately for playback.
I would hope there is a program out there that would embed the scc or mcc file ( however they are produced ) possibly after you export the sequence to a file. One of my favoite and best kept secret long-term video websites out there is videohelp DOT com. there is a plethera of kewl software to do all weird things to video, maybe even add CC!
All this still doesn't help us with Premiere Pro though...

Problems with Premiere Pro CS5

Everyone seems to be getting replies to all questions around here so i hope someone can help me out.
My premiere pro CS5 has decided to act up for the past three weeks: everytime i open an old project, it loads up, opens the project window and timeline, feels like it's all good, but then the spinning wheel appears and all fans go out of control on my macpro, and this process can go on for hours until my only option is to force quit the program, SADLY...
It's almost as if it's trying to conform all items in the project panel, but it mentions "all media loaded", and there are no dinamic link files to find.
There are two projects i'm constantly getting back to: one is a 720P poject which contains two timelines, a 30 min one which only has music now, and a 5min timeline with music, go pro footage and rendered HD animations from AE, all at 720P. Opening this project can take up to 40 min where i'm staring at a spinning wheel and hoping for the fans to not explode, that was not the case three weeks ago; I could close everything, shut down for the night and get back to it the next day.
Second project is a holiday video of Asia which goes for one hour and fifteen min, but it was all shot in 07 with an old Sony DV on standard def of course. Opening this project used to be smooth, even though i often moved things around and had to find them again. But now i want to rework on its sound, noise reduction anf create a nice DVD for my family, but I cannot open the project without having to wait for HOURS, and HOURS and HOURS - the longest being three hours and the spinning wheel was still going and the fans were louder than a lawn mower....
This never used to happen before and it is worrying me as I started editing a short film in 1080P, so far i can open it nicely, but it may turn into a mess like the other two projects.
The two projects used to have dinamic link files as i always had after effects and Encore working along PPRO to avoid rendering. At first, i though ADL was the problem for such a slow bootup, so i got rid of every ADL files and rendered instead, which consequently helped me in the process. BUT NOW, it is impossible to open them without a long and frustrating wait.
If i start a new project, everything is fine and will reopen smoothly - what are your thoughts on the matter guys??? Can a project be too heavy and requires 4 hours to load?...
I have a quad core MaPro with 32gb of RAM, so this should render and locate files lightning FAST....
I already reinstalled the whole suit but the problem still happens, i'm thinking about a complete format and reinstalling eveything from scratch...
thanks in advance for your suggestions.

Try these steps. Something is definately wrong with your loading times.
1. Delete PrP preferences (Option - Shift when booting up PrP)
2. Clean Media caches (Preferences Menu/Media)
3. Delete preview files
You dont mention where and on what system your media files are stored. For best performance a raid array is desirable.
4. Make new sequence and copy timeline from old to new.Do this if the above stuff doesn't help.
5. Upgrade to 5.5 where a lot of issues has been resolved.

Switching tabs while working with Premiere Pro CS5

Hello there.
I am currently working with Adobe Premiere Pro CS5 and I notice that when I'm reproducing/previewing the timeline or am recording, for example, an audio track, everytime I switch tabs (switch to another window or to desktop), in this case the recording stops. I've searched around Preferences and in help files and I cannot find an option to make Premiere continue what he's doing despite me changing windows. Is this even possible? It would be very helpful.
Cheers!

>Is this even possible?
No... PPro must have full control of the computer to work... shift to another program and PPro stops

Trial version of Audition CS 5.5 cannot interact with Premiere Pro CS5?

I have Premiere Pro CS5 and downloaded a trial of Audition CS 5.5. The option "Edit in Audition" in PP CS5 is greyed out, so I cannot test the sound editing interaction between the two PP and Audition.
What is wrong?
Is it not possible to use PP CS5 with Audition CS5.5?
Is it not possible in the trial version of Audition?
Or am I doing something else wrong...?
Greatful for your time and help!
Håkan

Thanks durin for your kind answer.
Since there is a menu item called "Edit with Audition" it seems as if there at least has been a connection before? So, can I buy/try an earlier version of Audition to make it work?
I want to test if Audition can remove some background noise that occur in one of my productions, before I buy. If it is possible to try it out in an earlier version , I guess I will also be prepared to upgrade PP, but I wont buy anything without knowing it can solve the issue.
Reagrds and thanks again,
Håkan

What software for someone to help with Premiere Pro CS5

Similar Messages

Maybe you are looking for