What sort of input should be given to the FP-DO-410 module to generate discrete output

We are using a FP-DO-410 module for creating discrete output.Can we use it to generate swept square wave pulses

Hi,
You can generate a "square wave" with the FP-DO-410, but this is not normally the way this module is used. This module contains "static digital output", which means you can only write true or false, in other words, you cannot exactly control the frequency of the output signal, if you want to have control of the frequency you normally use a counter module (FP-CTR-50X) or even better a FP-PG-522... these modules have their frequency hardware controlled...
You can create a square wave with the FP-DO-410 but in that case you will have to create the square wave via software and the frequency will be software dependent, connection dependent and so on... the final result will be very poor (no practical use)...
So, if you want to create square wave I
would advise the FP-PG-522.
I hope it helps
Best Regards
Andre Oliveira

Similar Messages

  • What type of input should be provided to the proxy function module HR_trv_credit_card_transaction

    Hello All,
    I am trying to configure the proxy for credit card transaction in Trip module,For this the standard proxy class is being used. I am not able to find out what should be the input to the function module Hr_trv_credit_Card_transaction. This relates to some  control structures.Does anybody has some idea on this.
    Many thanks
    Papiya

    Hello,
    The manual on page A-3 has some useful information. I am posting it below. Additionally, I found that the SCXI-1104 series use a two-pole RC Butterworth filter. As you'll see in the notes below the 10kHz cutoff is the -3dB point for the filters.
    Filters
    Cutoff frequency (?3 dB)
    SCXI-1104 ............... 2 Hz
    SCXI-1104C ............. 10 kHz
    NMR (60 Hz) ............ 40 dB (SCXI-1104)
    Step response (either gain)
    Accuracy SCXI-1104 SCXI-1104C
    To 0.1% 1 s 200 ms
    To 0.01% 10 s 1 ms
    Hope this helps,
    John N
    Applications Engineer
    National Instruments

  • Error:Lov Input should by default be the queryable criteria and Result

    Hello,
    I have a LOV Which displays the Locations.It has 2 columns Location_id and Location_Name.This LOV is attached to a field named "LocationName".Requirement is to show the existing location name based on the location id of the employee that is queried before updating the employee details.
    The programatic Query property of the associated LOV map is set to True as i need to bind the query with the location_id at run time. However this gives me the following error message when the page is opened :
    Lov Input should by default be the queryable criteria and Result
    Can you please let me know what need's to be done?
    Regards,
    GayatriJ

    Normally you will get this error, when you didn't give LOV field as the criteria item in the LOV mappings.
    Check you have given the LOV field as one of the criteria mapping for the LOV.
    Thanks.
    With Regards,
    Kali.

  • I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera.  Can anyone suggest the best camera (in the 5-10,000 dollar range) ?  What hardware and software should I include in the package?

    I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera.  Can anyone suggest the best camera (in the 5-10,000 dollar range) ?  What hardware and software should I include in the package?

    This is quite an open suggestion, but here are some ideas which might get you started.  There are good HD cameras in your price range from Sony, Panasonic and Canon (and maybe other manufacturers). Tapeless formats vary.  I have only worked with Sony XDCAM which seems pretty good to me.  File sizes for material shot at 35MBS are not too huge and, with the free Sony transfer and conversion programme, are easy to bring into the computer via USB direct from the camera or from a fairly inexpensive converter.  The Sony XDCAM EX3 can produce results well up to broadcast quality.
    As to hardware, you'll need a powerful MAC - iMac, Macbook Pro or MacPro with 4GB or more of RAM and a good video card.  Softwarewise, FCPX is quite a bit cheaper than FC Studio 3 and of course it's 64bit and can make better use of multi-core machines than FCP7.    It's also designed to handle HD formats with less hassle than FCP7 and is matched to the latest versions of Motion and Compressor.   But you'd probably be wise to search reviews of FCPX before you make your choice - it has some issues.
    A good HD monitor will be essential and, for colour correction etc, you may want to consider a second monitor or HD TV foe editing. ( A MacPro is generally the best machine to connect a second monitor to). 
    This should give you a good editing system, but there are many other things you could add (Photoshop, professional sound monitors, etc)
    Hope this helps a bit.
    Jonathan

  • Error - Developer Mode Exception : Lov Input should by default be the query

    How to get rid of this message?

    Full error message
    Lov Input should by default be the queryable criteria and Result

  • What sort of fxs card to buy for the cisco router 2801

    Hi
    I have just bought a cisco router 2801 which l want to setup for my VIOP lab. Can pls advice me on what sort of fxs card l should buy for the cisco router 2801 to connect the ip phones or the analog phones.

    Hi
    It depends what you want to do:
    IP Phones - need nothing
    FXS - needed only if you want to connect analogue handsets or faxes
    FXO - needed if you want to connect the system to a POTS line
    There are further interfaces (BRI, PRI etc) if you have different PSTN connectivity.
    What connectivity do you plan to have in your lab?
    Aaron
    Please rate helpful posts...

  • I'm using a card template and trying to find what Avery product I should get to print the card on

    I using a Pages greeting card template and trying to find out what Avery product I should buy to print it on. Where is this infromation?

    The Avery web site has the layouts of its products and also ms Word tempaltes that open in Pages.
    If you wish to use the Pages' templates select the overall rectangle of the card:
    Inspector > Metrics
    To find out the size and then look for the matching Avery stock, you will probably have to adjust bot the size and position for a close match.
    However since greeting cards are just rectangles folded in half all you need to do is print them on card stock with some crop marks offset from the corners and cut them out with a sharp knife or a guillotine. Not rocket science.
    Peter

  • What type of query should be posted in the Guidanc...

    Hi all,
    This board is primarily for help and suggestions relating to the community forums themselves, not for help and suggestions on BT products or services.  For example, if you don’t know how to quote another post, or are not sure how to change your avatar then this is the correct place to post those type of questions.  It may also be where you post a suggestion for a new topic area or other ideas for the community forums.  
    Posts that are looking for help or suggestions with queries relating to BT products and services should be posted in the most relevant categories – eg. Phone, Broadband, TV or Billing.  You may notice that if those queries get posted in the H&S board then the mods will move them to the most relevant board.
    What type of posts get moved from this board?
    Some of the posts the mods have to move from this board are related to email queries, PCs/hardware queries etc.  As these posts are all generally linked to broadband and your home PC then the best place to post this in is the ‘BB in the Home’ board.  The ‘BB out and about’ board focuses on BT Fon, BT Openzone, BT Mobile Broadband, and the BT Broadband Anywhere service. 
    If you are not sure where to post, read the list under each board title, this should help you choose where to post.  If you are unsure, make your best guess and the mods will move it if they need to.
    Thanks,
    Stephanie
    Stephanie
    BTCare Community Manager
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

    It is Prudent to purchase the Phone in the Country it is intended for use in... it will then work as expected.
    If you are attracted by the seemingly  Cheap   prices in the US... you are failing to take into account that you are probably looking at the phones that are LOCKED and CONTRACTED to a US Carrier.
    AND...
    iPhone Warranty  >  The warranty is only valid in the country of original purchase...
    Except if purchased in an EU Country...
    http://www.apple.com/uk/legal/statutory-warranty/

  • HT1665 For iPad 2 I want to buy a printer, what sort do I need?

    I want to buy a printer for my iPad 2 . What sort of printer should I buy and how do I set it up?

    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
     Cheers, Tom

  • An icon has appeared on my desktop called colour sync utility.  I clicked on it, and it came up with information about needing to repair something which I tried to do but it didnt work. What is this and shouldI be worried ?

    An icon has appeared on my desktop called colour sync utility.  I clicked on it, and it came up with information about needing to repair something which I tried to do but it didnt work. What is this and shouldI be worried ?

    The Color Sync Utility is part of OSX and usually resides in the Application/Utilities folder.
    Don't know how it appeared on your desktop.
    But it is no malware, spyware or the like but as said part of OSX.
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/8476.html
    Stefan

  • I am trying to generate an array of 30 random numbers. after every 5 readings a new vi should open and tell the user that 5 readings has been completed. and again carry on with the generation of array.

    since i do not have a transducer now, i am currently generating an array of 30 random numbers. after every 5 readings a warning should be given to the user that 5 readngs are complete. this cycle should repeat. the array size is 30.
    please help me out,  waiting for reply asap.
    once i have the transducer, i will be taking 30 analog samples and then after every 5 smaples that wraning will be displaye din a new VI
    Solved!
    Go to Solution.

    Use a while loop with a time delay representing your sampling period.
    Use the count terminal to check if equals 4, so 4th iteration=5th sample.
    Use a case structure. The true case will only be executed on the 4th iteration.
    In the true case place a subVI  with your desired message in the front panel. Go to the VI properties window and set "open front panel when called".
    The closing condition of the warnign is not giving in your description.
    Consider that rather than usign a subvi for this, you could use the "One/Two/Three button dialog" or "display message" vis at the "dialog and user interface" pallete.
    Please give it a try and send your own VI. Do not expect us to provide a working solution.
    Regards,

  • What does the core crypto kernel module in IOS comprise off?

    What does the core crypto kernel module in IOS comprise off? Basically trying to figure out if the new iphone & ipads are FIPS 140-2 compliant. (iphone 5 or 6 & ipad 3rd gen and above). Apple and NIST state that the Apple IOS core crypto kernel module v4.0 is validated FIPS 104-2 BUT what we don't know is that whether the core crypto kernel module covers the complete device or just some pieces and modules of the device ?

    msohailc wrote:
    What does the core crypto kernel module in IOS comprise off
    Doubtful anyone here would know that as we don't work for Apple and know nothing more than what Apple has made public in their FIPS documentation.,

  • I need a sample vi that can plot a transfer function given zeroes and poles (It should allow the user to input zeroes and poles). It should be done in the S domain.The user should be allowed to put poles and zeroes, with frequency

    I need a sample vi that can plot a transfer function given zeroes and poles (It should allow the user to input zeroes and poles). The user should be allowed to put poles and zeroes, with frequency. DONE IN S DOMAIN.

    I have created a VI (LabVIEW 6.1) that does what you want. Note that the poles and zeros have to be entered correctly that is in Rad/s and typically with negative real part. The VI offers you all options for lin/log frequency axis, magnitude in dB or not, phase in Radians or Degrees etc...
    The VI is written with "academic" in mind, so it is not optimized for performances but (hopefully) for clarity. I hope this will work for you.
    Attachments:
    S-Domain_Transfer_Function_from_Poles-Zeros.vi ‏167 KB

  • TS2846 My Services are from 3 Network UK, what should i do to get my phone number corrected in iTunes as it is displaying still the old number I was given at the time of purchase wheras it is now changed on my request

    My Services are from 3 Network UK, what should i do to get my phone number corrected in iTunes as it is displaying still the old number I was given at the time of purchase wheras it is now changed on my request

    Try Settings > General > Reset > Reset Network Settings on your device.
    Note you may have to re-enter stored Wi-Fi passwords after using this feature.
    tt2

  • Need to create a user who will run the logminer what rights should be given

    I Need to create a user who will run the logminer what specific rights should be given in order to run the logminer and query the logminer views. Cant give the sysdba privilages.
    Any help in this regard will be really appericiated.
    Thanks

    I have given the following privilages
    GRANT CREATE SESSION TO NEW_USER;
    GRANT SELECT ANY TABLE TO NEW_USER;
    GRANT EXECUTE ON DBMS_LOGMNR TO NEW_USER;
    GRANT EXECUTE ON SYS.DBMS_LOGMNR_D TO NEW_USER;
    GRANT SELECT ON V_$SESSION TO NEW_USER;
    GRANT SELECT ON V_$ARCHIVED_LOG TO NEW_USER;
    GRANT SELECT ON V_$LOG TO NEW_USER;
    GRANT SELECT ON V_$LOGFILE TO NEW_USER;
    GRANT SELECT ON V_$LOGMNR_CONTENTS TO NEW_USER;
    but when i try to add the logfile it gives me the following error
    ERROR at line 1:
    ORA-06550: line 1, column 85:
    PLS-00201: identifier 'DBMS_LOGMNR.NEW' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    What additional rights can i gave to run this
    Thanks

Maybe you are looking for