What spec does a GPS transmitter need to be to work with iTouch?

I want to use the BT capability of my 4th Gen Touch to connect to a GPS transmitter. What spec should it have, or can anyone tell me of one which works so I can use it for navigation? My rubbish phone can find the Bluetooth of a GPS receiver I bought, but as far as the iTouch is concerned there's nothing there.

In PS you could go up to (I believe) Image and select pixel aspect ratio and set to 1.0 and see how that works.
John Rich

Similar Messages

I get no wireless signal in my home, so need a network extender for the Lumia 2520. Specs indicate LTE FDD network:Band 20 (800MHz), Band 3 (1800 MHz), Band 7 (2600 MHz). Does Verizon offer a network extender that will work with the Lumia?

I get no wireless signal inside my home, only outside, so I need a network extender that will work for the Lumia 2520, Specs indicate it uses LTE FDD netork Band 20 (800MHz), Band 3 (1800MHz), Band 7 (2600 MHz). Does Verizon offer a network extender that will work with the Lumia 2520?

We want to make sure you get service in your home Astromandata! I can check your area to see if you qualify for the network extender. What's your zip code? If it does qualify than you will be able to use it for your Lumia to support your voice services. Find out more information here: http://spr.ly/6585fNlt Is anyone else having this issue?
AmberF_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

HT4854 What size does the recovery partition need to be for Lion or Mt Lion?

What size does the recovery partition need to be for Lion or Mt Lion?

Maybe I'm approaching the problem the wrong way. My problem is that I installed a new HDD in my laptop after cloning it to a backup drive, and I wanted to install the OS after formatting the drive using Disk Utilities from my desktop machine. Since I had Lion installed from the App Store as a paid download, I thought I'd start with a freshly downloaded install of Lion, but I can't access the internet directly with my laptop since it has no OS or apps. So I'm downloading Lion to my desktop machine hoping to install it on my laptop as a Target HD. Is that possible? Does the App Store download allow choosing which drive to install on?

At what point does the iPhone 5 need to charge?

At what voltage does the iPhone 5 need to charge?

When it gets low, typically at about 10% you get a prompt. It is a good idea to let it go completely flat once a month

I have a Mac desktop OSX Version 10.7.4 upgraded to Lion to use iCloud. Now my Parallels Desktop 5 for Mac/Build 5.0.9376 using Windows 7 does not open. What upgrade of Parallels do I need to make this work?

I have a Mac desktop OSX Version 10.7.4 upgraded to Lion to use iCloud. Now my Parallels Desktop 5 for Mac/Build 5.0.9376 using Windows 7 does not open. What upgrade of Parallels do I need to make this work? Or what do I need to do at this point?

Thank you Shootist007. I appreciate it!

What Else Does My FCP System Need?

Hi all,
So I am going to put a little money into my editing setup. At the moment I have a dual G5 2.5ghz, 4gb ram, 23" Cinema HD, a Sony broadcast monitor (not new, not too old, works well for what I do), a decent JVC deck that captures PAL/NTSC DV/DVCAM. The comp has a Blackmagic Decklink Extreme from about 2 years ago. Final Cut Studio 2.
Other than 1TB internal SATA storage, all my storage is Firewire 800. I think the first thing will be a SATA card and external RAID array.
So what are the next important things? I don't work with HD (yet) and my focus is really on music video editing, some minor compositing/motion graphics, and a fair amount of DVD authoring. Possibly a DLT deck, that sort of thing - hardware that will allow me to deliver more to clients.
Thanks everybody.
Jason

If you read carefully you can see that both me and
Brian at the end of the thread were talking about or
referring to the latest MacPro therefore it was
obvious that we were talking about Intel Mac systems
with an ATI Radeon Z1900XT.
No it wasn't obvious. The OP has a G5 and your first response seggested that he get a Graphics card that isn't compatible with his system. I think it is important for people to understand that just because a card is PCIe doesn't mean that it will work with a system that has PCIe slots. Not that his system even has PCIe, as has already been established it has PCI-X. But still, I have seen a lot of posts over the past few weeks that talk a lot about the X1900XT and it is not always made clear which systems this card is compatible with.
But this rant of mine is OT so...
Jason,
I would suggest a second Cinema Display. You'll really appreciate the additional work space. Also, I second Shane's suggestion for a mixer and some good nearfield monitors. I actually don't think that it would be wise to sink a lot of money into other gear until you have a real need for it. You already seem to have a pretty good setup. You're in LA so you can easily rent whatever decks you'll need. Don't spend any money buying a deck unless you'll be using it every day.

I have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

i have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

This is not my problem. However, I think it may be related to an old speaker. I was using the 30 pin adapter for about a week after the upgrade to 7.1.2. But I think with the update the speaker won't work anymore. I will try with a new speaker system. Thank you for trying to assist.

I purchased Itunes Match and every time i try to run it, it doesnt even finish step 1, it just says "We could not complete your itunes store request, an unknown error occured (4007" what do i do because i need itunes match to work!

I purchased Itunes Match and every time i try to run it, it doesnt even finish step 1, it just says "We could not complete your itunes store request, an unknown error occured (4007" what do i do because i need itunes match to work!

- Try manually placing the iPod in recovery mode and then restoring. For recovery mode:
iPhone and iPod touch: Unable to update or restore
- Next try DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

I m coming from linux platform ... now need my g to work with vim ... how to install g which supports C 0x ... why does not it has repository with apple ... its so easy rather than going to UI ...

i m coming from linux platform ... now need my g to work with vim ... how to install g which supports C 0x ... why does not it has repository with apple ... its so easy rather than going to UI ...

tom i have been using ubuntu for c++ project
i use lambda and atomic (c++0x) but now as I am working on MAC not able to use them
installed xcode(4.3) and changed compiler settings to LLVM3.1 but still both features are not available
to compile wanted to have g++ which supports c++0x features ...
new to MAC (2-3 days) so was in rush to solution
let me know if you have some suggestion ...
else will try with eclipse cdt ....

What version of iphoto do i need for my 2004 powermac with 10.5.8 and where do i get it

what version of iphoto do i need for my 2004 powermac with 10.5.8 and where do i get it

iLife 04 through 09, which are available from places such as eBay or Amazon.
(79729)

Does scripts of UCCX 9.0.2 will work with UCCX 10.5

Currently we are having UCCX 9.0.2-10000-71 installed on MCS server. We are planning to migrate on BE7K UCS server with version uccx 10.5.
1. Does scripts of UCCX 9.0.2 will work with UCCX 10.5
2. How i can restore historical data from 9.0.2 uccx to 10.5 uccx as new server will be having different IP address hence we cannot restore the backup. We need to create all configuration manually. Also uccx 9.0 was supporting Historical Reproting but 10.5 supports CUIC, so there is any way we can restore the reporting data so that we can pull old reports using CUIC as well.
Thanks & Regards
Netplace

Hi
Sounds like you have a lot to learn and should leave the upgrade to someone who knows the products.
1. Yes, typically they work, but testing this will be part of your upgrade process. The script may contain anything from basic steps (that will work) to complex stuff or embedded Java.
2. You would not restore the data. It's not possible. What you would do normally would be to change the IP address of the existing system either before or after the upgrade. CUIC and HRC are difference interfaces to the same DB, so it doesn't matter.
Regards
Aaron

Why does Apple iPad Camera Connection Kit no longer work with iOS8

Why does Apple iPad Camera Connection Kit no longer work with iOS8?

The kit is firmly inserted in thhe iPad's dock ? You could also try a reset and see if it's recognised after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
I haven't had problems using the kit with SD cards from Canon cameras . What capacity is the card, and it's an SD or SDHC card - if it's an SDXC card that's formatted as ExFAT then it won't be recognised

Does apples 30 pin male to female adapter work with iphone 4s to skydock

does apples 30 pin male to female adapter, work with iphone 4s to skydock (xm radio car cradle/charger)?

Howdy nanster23,
If you have as yet been unable to use this 30pin to lightning bolt adapter, I would like to recommend the troubleshooting in the following article to help you get that squared away:
If you need help with iPhone, iPad, or iPod touch accessories
These sections in particular since you have already done a couple of them:
Disconnect and inspect the accessory, then restart your device
Disconnect the accessory and turn it off, if possible.
Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
Restore iPhone, iPad, or iPod touch
Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Does airport extreme or any of the modems work with tds?

Does airport extreme or any of the modems work with tds?

Sorry. What do you mean by "tds"?
Also, Airport Extreme is not a "modem". It is a router.
Please rephrase your question.

Does anyone know if m-audio 410 will work with OS 10.8?

does anyone know if m-audio 410 will work with OS 10.8?

The Canon UFR2 v2.41 driver for 10.7 that was released last month also works fine on 10.8.
This driver is for UK English regions where your model is known as the iR1024iF. If you want to check the Canon USA web site for the US English version of the UFR2 v2.41 driver then you should get the correct model name.

What spec does a GPS transmitter need to be to work with iTouch?

Similar Messages

Maybe you are looking for