What SSD (Solid State Drives) will work with a MacBook Pro unibody A1278

What SSD (Solid State Drives) will work with a MacBook Pro unibody A1278?
I see all these options and I would like to know proper dimensions and speed:
SATA III (6 Gbit/s)
SATA II (3 Gbit/s)
SATA (1.5 Gbit/s)
PATA (IDE)
mSATA
PCI Express
Thanks!

Thanks! It looks like Sata III is the way to go and most are happy with this one:
Samsung 840 EVO
http://www.amazon.com/Samsung-Electronics-2-5-Inch-Internal-MZ-7TE250BW/dp/B00E3 W1726/ref=sr_1_1?s=pc&ie=UTF8&qid=1396894663&sr=1-1&keywords=ssd+2.5

Similar Messages

What is largest solid state drive I can install in MacBook Pro 8,2? I want to perform a clean install of Mavricks and dump my old hard drive.

What is largest solid state drive I can install in MacBook Pro 8,2? I want to perform a clean install of Mavricks and dump my old hard drive.

If the bank account permits, I suggest getting a 1 TB SSD anyway. One cannot have too much storage.
Unless you are having issues with your current installation, a 'clean' install is not necessary. It would be more efficient to clone your current drive to the new SSD, test it, and then do the swap. The installation of Mavericks over Snow Leopard can be done either before or after the cloning process.
Ciao.

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Yes, I too had this problem.
I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
MacBook Pro Retina running 10.8.2 (12C54)
Lightroom running 4.1
Hope that helps.
aa

What other hp print drivers will work with the officejet pro 8600

I have an Officejet Pro 8600 and like many others here, I am having a problem printing a custom size envelope (6x9). I did find that I can use the drivers for a deskjet 450 and setup my 8600 using those drivers. However, the 450 6x9 does not have a portait option in the layout.
My question is, what other hp print drivers will work in the 8600? I'm hoping one will have a 6x9 portrait layout?

Cheetah12 wrote:
Hello wingcheck,
Welcome to the HP Forums!
I understand you're receiving a problem printing a custom envelope size (6x9). You did state that you installed a Deskjet 450, but it doesn't come with a portrait option. I will do my best to assist you!
First, I need to find out your operating system on your computer? Windows or Mac?
If you have a Windows computer and using this Deskjet 450 driver, have you checked Devices and Printers on your computer to see if you have this portrait option:
1) Right click on the Deskjet 450, then click on Printer Preferences
2) Very top you should see a tab called "Finishing" and look for Orientation
3) You should see portrait, landscape, rotate by 180 degrees or mirror image.
4) Let me know if you don't have this option on this post
If not, then I would recommend installing a Deskjet 9800 to see if you have this option. Please follow this HP document on Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection. When setting up this custom size, change the paper type to "Other Specialty Media". Please post your results, as I will be looking forward to hearing from you. Have a great night!
Hi Cheetah .... I don't have access to my printer at the moment due to travel, but here's what I have right now. My operating system is Windows 7 64. That's not much, but it is a start. I will have the additional information for you in a day or so. Something else I discovered in the user guide, which I didn't know, is that each tray will only handle specific media. So, when I print envelopes, I will have to use Tray 1 in order to do so.
Now I do have another question for you. Can I have installed, 2 different sets of print drivers at the same time without it causing a conflict? I'm assuming the diffenent driver will simply show up as a different printer in the listed printers, right?? Any way, thanks for your quick response, and upon arriving home, I will follow your previous suggestions. I will also keep you posted as to my success or failure.
Thanks
Paul

What video camera will work with my macbook pro

I want to buy a video camera but I am not sure which camera is compatible with my MBP, do you know a camera that allows me edit my home movies without converting them first?

ATI HD 3870 - but I don't know that it will work with the new 2008 Mac Pros.
http://eshop.macsales.com/Item_XLR8YourMac.cfm?ID=10876&Item=ATI100435928
http://ati.amd.com/products/radeonhd3800/macpc/index.html
http://www.barefeats.com/harper15.html
http://www.barefeats.com/harper18.html

What blank DVD-R will work with a macbook pro and Matshita UJ-857E

Hi in my macbook pro is the factory fitted Matshita UJ-857E superdrive, when I insert a blank DVD-R it spits it out, blank CD's work ok.
I have Reset the System Management Controller (SMC).
I have tried three different types of brands including maxell, verbatim and cheap woolworths brand.
I bought an external USB DVD burner and this recognises any DVD-R I throw at it, so I think it can either be a faulty drive or it's a bit fussy about the brand of DVD's it can recognise.
Please can you post the blank DVD's that work on your macbook pro superdrive

Thanks for pointing that out, re posted here
http://discussions.apple.com/thread.jspa?threadID=1779572&tstart=0

WD External Hard drive not working with new Macbook Pro

I have recently upgraded to a new Macbook Pro and when connecting a WD 1 TB Passport external hard drive, it doesn't appear on the MBP, but when I connect it to my old Macbook running 10.5.8, it appears normally. Is this a problem with formatting or an issue because it is USB 2.0...
Any help appreciated as I have a lot of data on the hard drive and would like to be able to use it with my new MBP.

I'm on Lion, with similar issues with two WD external HD. But what I found fixed the problem was to:
1. go to the manufacturer's website (in this case Western Digital),
2. locate my external HD, download the download.
For instance, I downloaded the WD Drive Utilities for Mac (for My Passport for Mac USB 3.0):
http://support.wdc.com/product/download.asp?groupid=219&sid=157&lang=en
Install the downloaded app.
3. Plug in external (this part, I think is important) directly into your tower or laptop (as opposed to through a USB multi-plug extender). Possibly this is because you access more power?
[I'm trying to remember in which order everything happened. But I think at this point the external hard drive mounted]
4. Install the software that is found on the external HD (in my case, it was a brand new device, so that had never been installed).
5. Run "WD Drive Utilities" and run diagnostics.
6. Test to see if it holds. Unmount the External HD. Unplug. Replug in and see if it mounts.
Note: I have not yet tested to see if plugging in the external somewhere other than directly into the tower also works. But I think the main problem is getting it to mount the first time and installing the software. That's what I think.

Need a printer driver for a PIXMA MG2900 that will work on my MacBook Pro Operating System OSX 10.4.11

I have just purchased a Canon Pixma MG2900 printer and need to find a driver for this printer that will work with my MacBook Pro Operating System OSX Version 10.4.11.
I was directed to iTunes PIXMA/MAXI, but it didn't seem to download for me. It did say that it was for IPads or IPhones, not sure that it's intended for use on a computer.

Probably best to go to a library and submit your resume there.
You can make many web browsers claim to be ie. Here is how.
TenFourFox -- It's a port of the latest FireFox to run on older hardware and software.
"World's most advanced web browser. Finely tuned for the Power PC."
-- works for me on 10.4. Supports 10.5
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox
OmniWeb uses the lastest Safari framework. The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit. The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
http://www.omnigroup.com/products/omniweb/
Safari 4.1.3 for Tiger
http://support.apple.com/kb/DL1069
iCab - The Taxi for the Internet
http://www.icab.de/
What is my user agent?
http://whatsmyuseragent.com/
You want to change your user agent to be ie.
in tenfourfox
tools > add-ons
seearch for change user agent
install
user agent switcher
tools > User agent switcher
change to ie.

I have 23 inch Apple HD Display. Will this work with my MacBook Pro? How shall I connect it?

I have 23 inch Apple HD Display. Will this work with my MacBook Pro? How shall I connect it?

yarova818,
there were two different 23-inch Apple Cinema HD displays made. The first one was made between 2002 and 2004, and has an ADC connector. The second one was made between 2004 and 2008, and has a DVI-D connector.
If you have the display with an ADC connector, then according to this Apple page, your display will work with your MacBook Pro if it’s a 13-inch or 15-inch model. If you have a first-generation MacBook Pro, you’d need an Apple DVI to ADC Adapter (or equivalent) to connect them. If you have a Unibody or Retina MacBook Pro, then you’d also need a Mini DisplayPort to DVI adapter (or equivalent) to complete the connection. A Retina model would also have the option of using a third-party HDMI to DVI-D adapter to complete the connection with the DVI to ADC adapter.
If you have the display with a DVI-D connector, then if you have a first-generation MacBook Pro, you should be able to plug it in directly. If you have a Unibody or Retina MacBook Pro, then the Mini DisplayPort to DVI adapter would let you make the connection. Again, Retina models also would have the option of using a third-party HDMI to DVI-D adapter.

X200 SSD (Solid State Drive) with clean-install of Vista or XP?

Hi all,
I apologize for starting a new thread on a new forum; however, I am running out of research time.
I am about to buy a X200 with the 64GB SSD (Solid State Drive) (and it needs to be bought by tomorrow Can I ask couple questions? :
1) I am legally using this for business purposes with an MSDN license, so I can and will install any clean OS immediately. With the option to install any Windows OS; which will work best [or at all] with the SSD? (I have read conflicting articles, but most are outdated due to SSD's being so new.)
2) With only the SSD and without a MediaBase, I read several guides such as This Thread on this Forum on how "fun" a clean install can be...are there any extra difficulties with the SSD?
I am a software engineer and would normally piece this together my research; however, I am running out of time before I have to decide if the SSD is a viable and installable option at this time (and if I should buy it!)
Thanks a lot!
MikeY

Hello to all.
I'd like to know why AHCI mode is being suggested to use for SSD's? Please tell me why. I just don't understand. I think using Raid 0 Array would be the better choice. How does AHCI mode vary compaired to Raid 0 ? Is AHCI a better Mode? Does it give better performance then Raid 0?
I see alot of you are having problems setting up SSD's. I have read the first thing you need to do is make sure the firmware on any SSD you use should be updated.
I also see a lot of people here talking about the need to install Raid drivers. This is true with all other OS's, but I have found that after a fresh format, even on a new HD, I just installed Win 7 64 bit ultimate I went right into device manager to see what drivers are needed, & to my surprise all the drivers were already installed, including Raid driver & controller. I set up my Raid 0 Array at the F10 prompt, rebooted with OS disk with master drive after setting up boot sequence, & continued from there no problem with 2 150GB Raptor HD's in Raid 0.
I have gone as far as to use a Western Digital HD CD utility disc that has a write zero utility & used it to fast write zero's to the first 63 tracks & sectors including track 0 sector 0 where the MBR is written, & I've reformatted & reinstalled Win 7 from that point, & all the drivers still get auto installed. You can go right into device manager & see for your self. The only driver I ever need my be a sound driver update & Graphics driver. I'm not forgetting that the drivers that are auto installed are generic & may need updating, but what I'm saying is, I haven't seen any yellow question marks or exclamation points in device manager like you do with other OS's before Win 7.

What version of final cut Will work with my mac mini ??

what version of final cut Will work with my mac mini ?? Intel GMA 950 graphics processor with 64MB of DDR2 SDRAM shared with main memory Combo Drive
1GB 667MHz DDR2 SDRAM - 2x512MB
80GB Serial ATA drive
1.83GHz Intel Core 2 Duo
any firm answers?

do people from apple ever answer or help out on these questions--i think this is a pretty straight forward question: what version of final cut works on the following?
Refurbished Mac mini 1.83GHz Intel Core 2 Duo
1GB memory
80GB hard drive
Combo drive (DVD-ROM/CD-RW)
Intel GMA 950 graphics processor with 64MB of DDR2 memory

What dongles will work with a macbook OSX 10.6

Hello.
I have an old Macbook (2006) 13 inch and I have upgraded to Snow Leopard and the system is running OSX 10.6.8 and I am wondering what dongles will work with my Macbook. I am moving to a studio that doesn't have an internet connection and I think this is the only way I will be able to connect.
Thanks

I just cleaned the drive with a CD Lens cleaning kit, it looked like an ordinary CD but had two small brushes on it, a small amount of ethanol on the brushes, pop it in your superdrive, DVD's are now recognized
Was just a dirty laser, weird how it wrote CD's and not DVD's though, anyway, problem solved.

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new system. Does anybody have any suggestions for drives that will workw

There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
Clinton

I have a MDD dual 1.25ghz processors and I would like to know which sata drives will work with the Sonnet Seria ATA pci card?

Which sata drives will work with the Sonnet Tempo Serial ATA card?

Pretty much any of the SATA 3.0 Gbps drives.
Western Digital Black and Blue and Hitachi 7K drives are all good choices.
If you try a SATA 6.0 Gbps drive, it will need to be jumped to limit to SATA 3.0 Gbps.

What HDMI to Component converter will work with the current generation Apple TV3?

What HDMI to Component converter will work with the current generation Apple TV3?

http://www.hdfury.com/products/hdfuryiii-specs/

What SSD (Solid State Drives) will work with a MacBook Pro unibody A1278

Similar Messages

Maybe you are looking for