What STB setup do I need

I currently have 5 TV's running on Cox Cable with STB's. 1 TV on DVR, 1 on a Digital Box (without recorder) and the rest on general cable connections.
I am considering FIOS but I'm confused on how this works with 5 TV's.
Will I have to pay extra to have all 5 on FIOS?
Thanks,
Solved!
Go to Solution.

Unless your TVs have a QAM tuner built in (most newer sets have this) you will need an STB for each set.  If you have a QAM tuner you will only get local SD, local digital (HD), music, and PEG channels - NO NATIONALS like ESPN, USA, FX, etc.  On initial install Verizon will charge you an additional fee for each TV over 3.  You can avoid this by getting 3 initially and then ordering 2 more (for self install as long as you are comfortable with that) later.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

  • What are the mandatory fields needed to setup/register the SIP phone manually in CUCM

    What are the mandatory fields needed to setup/register the SIP phone manually.Also, if someone can let me know the mandatory fields for Cisco based SIP phone and also the third party SIP hard phones like Avaya or any other Third party SIP phones both Soft phone and physical phone requirements...in CUCM
    Please suggest...I need to know if MAC address is mandatory for all Cisco SIP phone to setup 

    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/bccm-712-cm/b09sip3p.html
    http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-version-70/112110-phone-add-00.html

  • HT3775 I am using OS X Mountain Lion and I have this .avi file but not able to read. What is missing in my setup and what other file do I need to download to enable me to read?  I can read mp4 files though.

    I am using OS X Mountain Lion and I have this .avi file but not able to read. What is missing in my setup and what other file do I need to download to enable me to read?  I can read mp4 files though.

    Here is a link: https://itunes.apple.com/en/app/mplayerx/id421131143?mt=12
    I agree that VLC is also a good choice but MPlayerX is more user friendly.

  • My client with autism needs to be able to speak/sing into a microphone and simultaneously hear his voice through a headset, preferably with reverb set on high.  Is it possible to do this with the iPad and OS7?  If so, what setup do I need?

    My client with autism needs to be able to speak/sing into a microphone and simultaneously hear his voice through a headset, preferably with reverb set on high.  Is it possible to do this with the iPad and OS7?  If so, what setup do I need?  I have a SM58 type mic and-over-the ear headphones.

    This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
    ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
    Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
    If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference.

  • If you want to set up a iphone plan in store, what are the documents you need ?

    when doing a instore setup what are the required things needed. Say this is your first iphone ?

    Credit card & picture ID should be all that is needed. If you've never had cell service before, they'll run a credit check.

  • What is FireWire and what FireWire adapter do I need to use FireWire 800 for my portable external hard drive ?

    Hi guys, I'm new to Mac. I have a MacBook Pro 13" (late 2011) with Lion OS and Parallels 7 (Windows 7). My understanding is that there is FireWire connection / extension built in to the MacBook Pro already. I also have a Seagate FreeAgent GoFlex portable external hard drive 750GB USB2.0 and 3.0 (that can be used for PC and Mac). It states that the portable external harddrive is FireWire 800 compatible. The questions are (1) how does FireWire works ? (2) how do I use or activate FireWire 800 ? (3) is there any setup / setting changes I need to on my MacBook Pro ? (4) what FireWire adapter do I need to purchase to connect my portable external harddrive to my MacBook Pro ? Is it expensive ?
    I read a few articles online but they are too technical for me. They mentioned something about FireWire adapter with 6 pins or 9 pins. Not sure what that means. I'm totally confused. So any help, advise or guidance will be much appreciated. In Layman's term would be better. Thanks.
    How about Thunderbolt ? Is it compatible with the above external portable hard drive mentioned ? Do I need a Thunderbolt adapter for it ? How do I activate or use Thunderbolt ?

    Thanks, Clinton and Alberto.
    The below link is the Seagate FreeAgent GoFlex portable external hard drive (product code STAA750302) that I have. It states that it features USB 2.0 or 3.0 plug–and–play connectivity and easily upgradeable to USB 3.0, FireWire 800 or eSATA. It only comes with a 18-inch USB 3.0 / 2.0 backward compatible cable.
    http://www.seagate.com/au/en/external-hard-drives/portable-hard-drives/standard/ goflex/
    Based on the above, my understanding is that I need to buy a FireWire 800 adapter to connect to the portable external hard drive so that I can use FireWire 800 with my MacBook Pro. Is this correct ? Do I need to get a separate cable as well or can I just use the 18-inch USB 3.0 / 2.0 backward compatible cable that was provided in the box ? If so, what sort of FireWire 800 cable do I need to get ? 9 pin to 9 pin ? 6 pin to 9 pin ? Or 4 pin to 9 pin ?
    https://www.lindy.com.au/online/arrshop.exe?anonymous=true&cat=b1

  • What RAID setups work for each setup?

    Can anyone point me to a source that can give me detailed information about what RAID setups are best for each situation. Our current situation is that we have:
    2x Xserve RAID running on Xsan with two Xserve G5 servers, one for media and the other for Metadata.
    We are thinking about using one whole RAID (2x LUN) for Media, and 1 LUN of the other RAID for metadata, and then the second LUN of the second RAID for switchable media (backup on HD's). So what RAID is best for media and what is best for metadata? Is it possible to set a whole RAID with two LUNs as RAID 0 or would it need to be seperate?
    If someone has some info about what RAID setups work best I would be happy to hear about it!
    We will be connecting 3x FCP machines through fiber, but other workstations will be connected through a deticated ethernet switch with 1Gb connection to the Xsan but 100Mb connection to the Switch.
    Best regards,
    Orvar Halldorsson
    Sagafilm

    You can also try the Xsan Tuning Guide. It recommends that the Meta info be striped as raid 1. When you are in RAID admin and click on create array it will tell you which raids are good for speed and which ones are good for protection. Here is the link as well
    http://manuals.info.apple.com/en/Xsan1.1TuningGuide.pdf
    There is also an app you can download to test the bandwidth of the volumes.

  • Задайте ваш вопрос.Bought with "hands" iPhone 4-cdma (and it is tied to the old Apple ID owner data I do not know) what to do? Very need help

    Bought with "hands" iPhone 4-cdma (and it is tied to the old Apple ID owner data I do not know) what to do? Very need help

    You are experiencing Activation Lock.  If the previous owner will not remove the device from their account there is nothing you can do unless the place you purchased it from will give you a refund.
    Activation Lock: http://support.apple.com/kb/ht1766
    What if I purchase a device that is still linked to the previous owner's account?
    Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account.
    How do I check for Activation Lock before purchasing a used device?
    When purchasing an iPhone, iPad, or iPod touch from someone other than Apple or an authorized Apple reseller, it is up to you to ensure that the device has been erased and is no longer linked to the previous owner’s account.
    Follow each of these steps to make sure that you can use the device you purchase:
    Turn the device on and slide to unlock.If the passcode lock screen or the home screen appears, the device has not been erased. Ask the seller to completely erase the device by going to Settings > General > Reset > Erase All Content and Settings. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been erased.
    Begin the device setup process.After choosing a language, choosing a country, and connecting to a network, the device will begin activation. If you are asked for the previous owner’s Apple ID and password, the device is still linked to their account. Hand the device back to the seller and ask them to enter their password. If the previous owner is not present, they can remove the device from their account by signing in to icloud.com/find. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been removed from the previous owner’s account.
    You will know that a device is ready for you to use when you are asked to “Set up your iPhone", “Set up your iPad", or “Set up your iPod” during the device setup process.

  • What kind of cert is needed for Client to MP/DP communication.

    Hi, 
    What kind of Certificate is needed for Client to DP/MP communication?   I know what the documentation says about setting up a Client cert and setting up auto enroll however, we are not able to setup auto enroll in a couple domains so we are trying
    to figure out how to get certs on these other machines.
    Will any cert listed in the personal store of the Client and the MP/DP work? 
    How does Config Manager pick the cert it needs to use for this on the CLient side and MP side?
    Thanks in advance.
    Thanks Lance

    We manually created a cert for a machine using the Config Manager Client template.   THis was the same template used to create the config manager client cert that we installed on the site system.
    So both the Config Manager server and Client have a cert created with this template (and therefore show the same template id).
    The client and config manager server have root certificate in the trusted root store from the same CA.
    in our ccmmessaging.log file on the client we get the following error.
    Certificate [Thumbprint ksdjfskfjdsfksjfskdfjskdjfskjfskdjfklsjdfslkfjdslkf] issued to 'machinename' doesn't have private key or caller doesn't have access to private key.
    in the certificates MMC it shows for the certificate with the above thumbprint..
    you have a private key that corresponds to this certificate.
    What are we missing?
    Thanks Lance

  • Can I add a second hard drive and if so what cable etc would I need to do so?

    Can I add a second hard drive and if so what cable etc would I need to do so?
    This question was solved.
    View Solution.

    Hi,
    For many 17" (or 17.3") machines such as Envy 17, dv,  Pavilion 17 .... you can add a second HDD (my old loan dv7 has two HDD's and my current loan Envy 17 also has 2 HDD's). You would need the following kit:
        http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=379
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • EXACTLY what cable(s) do I need to connect my MacBook Pro (early 2011) to an external display with a 2560x1440 resolution?

    I am trying to connect my MacBook Pro (early 2011 w/ Intel HD 3000/ 384Mb) to an external display with a 2560x1440 resolution. Specifically, what cable/connections do I need to display at this resolution? I cannot get the display to work using a "Thunderbolt to HDMI" or a "Thunderbolt to DVI" connector.  Note:  I used both older and newer (uni-directional) HDMI cables on the first config, and a Dual-link DVI cable on the second config.   Apple specs state this is possible ( support.apple.com/kb/SP619 ), but I am at a loss as to how this can be done.  Thanks in advance for the help!

    You use a Mini DisplayPort to either HDMI or dual-link DVI adapter. If that component doesn't work, something's wrong with either the cable or something else in the connection.
    (112855)

  • What cable/adapter do I need to connect my MacBook Pro to a Sharp Aquos TV?

    What cable/adapter do I need to connect my MacBook Pro to a Sharp Aquos TV?
    I want to watch videos on youtube or read articles on my laptop, and I want a cable/adapter that will hook up the Macbook to the TV and display the webpage that is on the laptop.

    Of course it doesn't. But you can buy an adaptor from HDMI to the Mini-DisplayPort port on the computer.

  • Can I set up a 2 (or 3) room audio system? I have iphone 3, iphone 4 and ipad 2 and need to know what hardware, if any, I need for this (airport express?, apple TV?) Also, would I use icloud or home sharing?

    I need to know what hardware, if any, I need to do this (airport express?, apple TV?)
    I simply want to send music from my itunes to 2 different rooms at the same time. Is it possible? I have iphone3, iphone4 and ipad2 if that helps.
    Also, would I use icloud or home sharing? Sorry for the noob question, any help is appreciated.
    Thanks!

    The answer is not if you use iTunes.
    The TC is NOT an iTunes server.. it is not a media device at all. It is a backup location for Time Machine.
    You need a computer in the network which stores the iTunes library and you can then play it via the ipad.
    A mini with a large USB drive plugged in will work fine.. it doesn't need to be new.. a couple of years old mini will work just as well.
    As an extention to this, can we use multiple Airport expresses plugged into mutiple sound systems to simultaneously access different music from the same time capsule?
    I am not sure.. there will be network limitations to this.
    Look up how to use itunes in a network.
    http://support.apple.com/kb/ht4620
    You would do better perhaps posting the question in iTunes section.. if as I guess you are actually using iTunes.

  • HT5299 i have an apple cinema display circa 2005. what thunderbolt adapter do i need in order to be able to plug it into a current mac mini?

    I have an apple cinema display circa 2005. What Thunderbolt adapter will I need in order for it to work with a current model Mac Mini?

    see > I have an Apple Cinema Display ADC. What adapters do I need to hookup my ADC connected monitor to my Mac Mini.
    or > Using Older Apple ADC Displays with Mac Pro - The Mac Observer
    and > Thunderbolt and ADC: Apple Support Communities

  • What adapter/converter do I need to put GoPro videos onto iPad

    What adapter/converter do I need to put GoPro videos from my iMac to my iPad?

    What file type are the videos? If you have converted them to GoPro video format, iMovie should be able to convert the video to a format that con be used by the iPad.
    H.264 videos output by the camera may be able to be used by the iPad by directly importing them from the camera to the iPad with Apple's Camera Connection Kit.

Maybe you are looking for