What Step am I missing

I've got an imac and a Win machine connected to Airport Extreme. The Win machine is on the floor above the Extreme Base Station. Just got a used G4 ibook, with factor installed Airport card. The laptop will detect the network when it is almost right next to the base station, but when I move to another location it drops the signal. Presumably, I would think it'd pick up the same signal where my imac is located, and the Win machine. Took the Airport Extreme that I normally use to stream internet radio to my stereo to see if that would "boost" the signal to where the laptop is going to work (my daughter's room on the third floor) but still can't catch a signal. I've gone through the configuration and it looks just like what is on the imac. What am I missing?
Thanks

It sounds like either the antenna wire has become loose from the AirPort Extreme card or the antenna is defective.
Use the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card to verify that the antenna wire is installed properly.

Similar Messages

IMovie '11, what steps am I missing, when I go to SHARE, IDVD is grey and not activated, only ITUNES and MEDIA BROWSER? I want to burn a DVD.

iMovie '11, what steps am I missing, when I go to SHARE, IDVD is grey and not activated, only ITUNES and MEDIA BROWSER? I want to burn a DVD.

Share your movie to the Media Browser. Then, in iDVD, drag your movie in from the Media Browser at the bottom right.
THe Share to iDVD option is only activated if your source material is DV or AVCHD.

I am trying to change the font on my emails and I keep following the instructions exactly by going into preferences, fonts and colours and then choosing - then when I go out of that and back to the message it reverts to Helvetica - what step am I missing?

I am trying to change the font on my emails; I follow the instructions exactly going to Preferences, Fonts & Colours, then I set the preference - I then go back to my message and it reverts to Helvetica. What step am I missing?

There is a display bug, but it still works okay -
I prefer Arial to the default Helvetica, so that's what I set -
When I first open a new message window, it displays Helvetica as the font -
However, as soon as I type the first character, it switches to showing Arial as the font -
...and actually enters in Arial.

In iTunes I'm having problems changing the "Media Kind" with a number of playlists in the OPTIONS menu from "music" to "audiobook". After going through the steps, the next time I check the items have reverted back to "music". What step am I missing?

In iTunes I'm having problems changing the "Media Kind" in the OPTIONS menu from "Music" to "Audiobook". After going through the steps, the next time I check, the items have reverted back to "Music". What must I do to save it as an "Audiobook"?

After more digging in the Support section here and some Google work, I turned off iTunes Match and lo and behold! I can change the media kind to Audiobook! So, it looks like iTunes Match locked the files up somehow and for some reason.
I went into iTunes Store > iTunes Match > "No, Thanks" to disable it on the local PC.

HT2736 Purchasing a gift card twice me to the iTunes Store Support to complete the purchase. What step am I missing?

I have tried to purchase a gift card twice and both times it has referred me to the iTunes Store Support to complete my transaction. Am I missing a step or going to the wrong place?

Click here and request assistance.
(75731)

Help please - What step am I missing????

I am using LR3 on a PC platform.
I have created a catalogue, done my editing, etc. on my desktop computer.
I want to transfer the (I hope I say this correctly) virtual images to my laptop for viewing only, not manipulation. I don't want the image files on the laptop because of harddrive space.
I took the whole directory (folder), copied it to a portable drive then placed the whole directory (folder) onto my laptop. When I open the catalog on my laptop it says the folder can't be found. The images appear VERY pixilated - it's as if the xmp files, or something are missing.
Even though all works properly on the desktop do I need to EXPORT the catalog for it to work properly on the laptop (or other computer)? I have to believe I'm not seeing the forest for the trees and the solution is very simple.
I hope this makes sense.
Thanks in advance for any help.

In looking up "RENDER" in the help menu, am I correct that the rendering must be done when initially importing the photos into the original catalog, or when I open up the catalog?
I am not finding "render" in any of the menu options. Do you mean to set to 1:1 in the Develop Module under Navigator on the left sidebar?
I did find this in the "Help" but nothing about where, or how to implement the render function. http://forums.adobe.com/thread/358026?tstart=0
Thanks for your input. I will get this!

Under SHARE, IDVD is grey, what step am I missing? Only MEDIA BROWSER and ITUNES is active?

I'm unable to SHARE my IMOVE since IDVD is grey and not active, only MEDIA BROWSER and ITUNES. I'm using ITUNES '11.

Hi
A. I don't know
B. I think that THERE ARE A MUCH better choice to do - ! ! !
As Share to Media Browser is OK
(I NEVER use Share to iDVD from within any iMovie versions as the result will be bad to even worse)
Use this and Share as LARGE (Not HD - also degrading result)
Now Close iMovie and Open iDVD and Import movie from Media Browser - This will result in as Good result possibly when movie comes from iMovie'08 or 09 or 11.
If You want even better result then use
• iMovie up to HD6 - or -
• FinalCut any version
So that the material exported over to iDVD is fully interlaced - as DVDs are so and as SD-Video quality is so as Standard. (There are no HD-DVD quality (but academic - very rare and needs special players))
Yours Bengt W

I am unable to get sound using apogee jam with my guitar. I can see input levels but no sound. What step am I missing?

I am unable to get any sound using apogee jam with my guitar in logic pro 9. I am using Macbook pro.

status...
DWdrummerBeam
Jun 4, 2012 3:24 PM
I think I have done something wrong. I used my Apogee Jam on a guitar project with several audio tracks in Logic Pro 9. And while the Apogee Jam still was connected, I switched to another project with only instrument tracks (synths). I forgot to change the "Built In Input". After I did this, my guitar sounds like crap when I try to use Apogee Jam in the same guitar project, or also if I create a new project. I use Guitar Rig 5 (Native Instruments) as my guitar plug-in. But the guitar sounds strange even if I don´t assign Guitar Rig.
Can somebody help me?

I had a power outage, my battery powered surge protector worked. But now when I turn on my Apple TV, I cannot get beyond the computer and setting screen, and see the Apple TV options screen. What step am I missing. Internet is working.

After the power outage, turned on TV and tried connecting to my Apple TV, but directed to a screen with a computer Icon and a Setting Icon. Can't get past this screen to my TV options screen. Internet is connected??? How to I get to my TV options?

Yes I had already reset my internet connection and had no progress. However, while I was trying to figure out a solution I used my Apple TV to listen to music from my computer. Then I went back and tried again and the TV icons appeared - and Apple TV was working

I moved my iphoto folder to a new location by mistake. I've moved it back to its original location, but iphoto no longer sees the photos. What step(s) am I missing to return to the setup I had.

i moved the folder containing all of my photos to a new location on my hard drive by mistake. I've moved it back to its original location, but iphoto no longer sees the photos. What step(s) am I missing to allow iphoto to see the photos as it did before. Also,
I am trying to back up all of my photos to a thumb drive. Is there a way to do this thru iphoto?

Witholut knowing what you did, it's hard to know what you missed doing, no?
Try Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
Backing up just the Photos? File ->Export
Backing up the Library?
Most Simple Back Up
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex:
Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate

What steps do I take to give my husband my older IPAD w/o removing him from my Apple account?

I recently bought a new IPAD2. All personal data and APPS were transferred from my older IPAD to my new one at the time of purchase. I'd like to give my older IPAD to my husband w/o removing him from my Apple acct. Apple's support does not provide instructions for my situation. Does anyone have suggestions as to what steps I should take?

What you might need to do depends upon how you want the old iPad to be for him.
If he will be using your iTunes account for any purchases/downloads from the store then he can continue to be logged in with your account in Settings > iTunes & App Stores. If not then log out of your account by tapping on your id in there, and he can then log in with his own account - any apps and other store downloads that you leave on the iPad will remain tied to your account, so only your account will potentially be able to redownload them and/or download updates to your apps.
To use his own account for Messages he can log out of your account via Settings > Messages > Send & Receive - tap on your id at the top of that screen and select 'sign out' on the popup. He can then log in with his account. Similarly for FaceTime : Settings > FaceTime (tap on your id on that screen). And (if he wants to back up his content to his own account) : Settings > iCloud > Sign Out
If you want to remove all content from the old iPad so that he can start afresh with it, then Settings > iCloud > Sign Out, and then Settings > General > Reset > Erase All Content & Settings

I am about to buy a new computer and I noticed that the system comes with Windows8. I have Photoshop CS6 for windows 7. My question is can this be loaded onto the new windows 8 and if so what steps do i have to take?. Are there any things to avoid?

I am about to buy a new computer and have noticed that the system comes with Windows 8. I have Photoshop CS6 for windows 7.
I would like to know if this can be loaded on the new system? and what steps I need to take to ensure it functions correctly.

Windows 8 meets Photoshop CS6 system requirements, see the link below
System requirements | Photoshop

I had an in-game purchase that failed to give me my items purchased, this is usually an easy fix, but this one was through EA, I would like to know what steps I can take to rectify this. (I realize that NOT playing EA games is the best answer...)

I had an in-game purchase that failed to give me my items purchased, this is usually an easy fix, but this one was through EA, I would like to know what steps I can take to rectify this. (I realize that NOT playing EA games is the best answer...)

Can you try to restore your inApp?
If that doesn't work:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

I have a 3GS iPhone, version 3.1.2. I have never plugged my phone into a computer or synced with iTunes. If I do so now, I will I lose everything? What steps need to be taken to ensure that all of my data, contacts, photos, etc. are not lost?

I have a 3GS iPhone, version 3.1.2. I have never plugged my phone into a computer or synced with iTunes. If I do so now, I will I lose everything? What steps need to be taken to ensure that all of my data, contacts, photos, etc. are not lost?

IOS: how to back up http://support.apple.com/kb/HT1766

I have 2 yr old Iphone 4 and have not backed up or connected to Itunes or backed up for 1 yr. I have new computer and want to connect and copy Itunes folder from external HD to new computer and install Itunes. What steps should I take and what precautions

I have a 2 yr old Iphone 4 and have not backed up or connected to Itunes up for 1 yr. I have new Windows 7 computer and want to connect and copy Itunes backed up folder from external HD (a year ago) to new computer and install new Itunes and new IOS. What steps should I take and what precautions? I don't want to lose any data on my phone such as music, photos, contacts, notes, texts etc, nor lose music from prior backed up Itune folder. Apps should be OK from app store? Thanks for any help.

Hello CosK,
The following guide can step you through the process of using a backup of your iPhone 5 to transfer your content to your iPhone 5s.
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Should one or both of your phones fail to appear in iTunes, the following article provides troublesooting steps that can assist.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

What Step am I missing

Similar Messages

Maybe you are looking for