What steps are needed to configure the apps tier after a db-only clone?

Hello Gurus.
My client wants to save time on cloning, and has asked for database only refresh - meaning that we dont clone to the application tier, but only to the database.
What steps must be taken once the db clone has completed? Need I run autoconfig? What about all the profiles that will be pointing to LIVE in the database?
Thanks.
DA

hi Dan
this is covered in the Rapid Clone documents -- Refreshing a Target System
Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
you should run adautocfg.sh on the application tier as well. Otherwise the essential information regarding your application tier will not be registered within the database and you will not be able to connect to your database through the application.
adcfgclone will not be necessary on the application tier.
Yes, you need to run AutoConfig to populate FND_NODES with the application nodes information. You may also need to clear the FND_NODES table as described in the following note:
Note: 260887.1 - Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260887.1
source;- https://forums.oracle.com/thread/652681
AppsMasti
Sharing is Caring

Similar Messages

What steps are required to configure the Payroll Tax ( USA)?

Hi All,
Please answer
What steps are required to configure the Payroll Tax ( USA)?.
Thanks in Advance
Thank you,
GKReddy.K

hi Dan
this is covered in the Rapid Clone documents -- Refreshing a Target System
Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
you should run adautocfg.sh on the application tier as well. Otherwise the essential information regarding your application tier will not be registered within the database and you will not be able to connect to your database through the application.
adcfgclone will not be necessary on the application tier.
Yes, you need to run AutoConfig to populate FND_NODES with the application nodes information. You may also need to clear the FND_NODES table as described in the following note:
Note: 260887.1 - Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260887.1
source;- https://forums.oracle.com/thread/652681
AppsMasti
Sharing is Caring

HT1386 Switching from a pc to a Mac. What steps are needed to get my iPhone and iPad to work with my new Mac?

What steps are needed when upgrading from a pc to a Mac?

Copy everything from your old computer to your new one.

My Logitech bluetooth laser travel mouse does not connect at startup to my recently upgraded iMac. Even when this is configured. I need to configure the mouse everytime after startup!!

My Logitech bluetooth laser travel mouse does not connect at startup to my recently upgraded iMac. Even when this is configured. I need to configure the mouse everytime after startup!!... It worked fine with previous OS X .... How can I fix this??

My Logitech bluetooth laser travel mouse does not connect at startup to my recently upgraded iMac. Even when this is configured. I need to configure the mouse everytime after startup!!... It worked fine with previous OS X .... How can I fix this??

What commands are needed to configure authentication?

I'm running the JaasAcn Sample from a DOS prompt on a Win XP client and am getting 'authentication failed'. My Active Directory Realm is AD.COURSEWIZARD.COM and the KDC FQDN is ad.ad.coursewizard.com. It succeeds when I run the 'Sample' locally on the AD server. If I set 'isInitiator=false' in jaas.conf, it succeeds no matter what I enter for username & password. It seems that I need to configure an SPN.
When setting an SPN, are you declaring that a particular AD user account is associated with a remote service that will be requesting authentication?
Do I have to also use the 'ktpass' command, even though I'm using a Win client?
If I use ktpass, but am just testing with a PC on the Inet, should I just use my IP address for domain since I don't have a FQDN?
Do I need to move the keytab file, created by ktpass, to the client and configure it to use it?
Does the ADS need to have a krb5.conf or krb5.init file? I don't see one under '../drivers/etc/'.
What commands are needed in order to configure the server, and client, to authenticate successfully?
Cheers

Sorry, I haven't seen a nice JGSS for Windows guide yet.
Back to your questions:
1. When setting an SPN, are you declaring that a particular AD user account is associated with a remote service that will be requesting authentication?
IMHO, setspn creates a service-like alias for a normal AD account, so that GSS style server program can use it as a NT_HOSTBASED_SERVICE name.
2. Do I have to also use the 'ktpass' command, even though I'm using a Win client?
ktpass is used at the server side, what you use at client side is unrelated.
3. If I use ktpass, but am just testing with a PC on the Inet, should I just use my IP address for domain since I don't have a FQDN?
Porbably not. Anyway, AD works fine with a DNS. If you haven't one, config the AD server as a DNS server.
4. Do I need to move the keytab file, created by ktpass, to the client and configure it to use it?
No, keytab is used at server side. The client side uses the native credentials cached in LSA after you login to Windows as an AD account.
5. Does the ADS need to have a krb5.conf or krb5.init file? I don't see one under '../drivers/etc/'.
Yes, Java needs the file for both client and server JGSS programs. Normally it should be inside the WINDOWS directory. Somethign weird woun happen if you uses Terminal Services or else. Add -Dsun.security.krb5.debug=true to the Java command line will show you when Java tries to look for this file.
6. What commands are needed in order to configure the server, and client, to authenticate successfully?
You need setspn.exe and ktpass.exe on the server to create the SPN and the keytab file. No tools are necessary on the client side, but MS's kerbtray.exe and klist.exe (attention: MS's klist, not Java's) are nice. BTW, a nice network sniffer (say, Wireshark) is also useful.
I'm not an expert on all these questions, but I cannott resist the temptation to give an answer to each of them.

What steps are needed to trigger a W-2C?

I need to create a scenario in our test environment that will generate a W-2 C for an employee. What steps / actions do I need to take in SAP. I know I need a payroll adjustment or a YE adjustment. Can someone please outline this for me.
Thanks,

Hello Carla,
First the filing data of the orginal W-2 needs to be set. W-2C are then generated when there is a change in the information on the W-2 that was filed with the IRS. These changes include wages, tax amounts, Soical Security number changes and name changes.
Please refer to the "W-2 Post-Filing Run User Guide " which I have attached and can be found on SAP Service Marketplace at service.sap.com/hrusa
Regards,
Manny

What cables are needed to extend the range of my airport extreme with my time capsule

I just purchased a new Time Capsule, and I want to install it and use my current Airport Extreme to extend our home's wireless network. What extra cables are needed, and is there a diagram for this setup? We currently have a broadband network.

Apple's instructions to do this are here:
http://support.apple.com/kb/HT4260
You will need an Ethernet cable to connect your new Time Capsule to the AirPort Extreme.

What steps are needed to untag default vlan to gigabit port on SRW208P

We have VLAN 1 disabled on our standard Cisco Catalyst switches and use VLAN 11 as our default. We have recently added VLAN 221 for voice while implementing a new Cisco UC system. I can't seem to disable VLAN1, however, I have made the default VLAN 11 and Voice VLAN 221. In VLAN Management, I can untag VLAN 11 (PVID) on all ports but the Gigabit port connecting to the Cisco 6506. That port always tags VLAN 11 & 221 and untag (PVID) VLAN 1.
I have tried making changes to the switch while connected to the switch and when I make the setting, the switch loses connection to the 6506. If I make the appropriate changes to GI(1) while connected to GI(2), that change takes effect, however, when I move the patch cable to GI(1), the port configuration changes and VLAN 11 becomes tagged and VLAN1 becomes untagged.
What is needed to stop this from happening?

Hi, I do not support the UC500 model so I can only give information to the switch. The older ESW, SX300 and SX500 series were designed to plug and play to the UC300/500 series for basically zero configuration.
To my knowledge (which I can be very wrong!!!!!) The UC500 uses vlan 1 data, vlan 100 by default and it usually doesn't deviate this.
You may disable the smart port and auto voice vlan features, yes. However, this means you need to manually configure your ports or use the telephony OUI features.
I can outline how to disable the smart port and avoid using auto voice vlan, however, it would be most prudent for you to call the UC500 support to 100% ensure there is not a better way to manage via way of the UC platform.
If you could please call the SBSC and verify there is nothing better to be done then I would be happy to further assist
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
-Tom

What steps are needed to download an older version of Firefox for testing an Oracle certified version?

I want to download an older version of Firefox for testing Oracle certified versions (for PeopleSoft PeopleTools). I found the directory of older versions but need instructions for the steps needed to download the desired version, which is version 17. Thank you for your help.

The latest Firefox 17 ESR ''(Extended Support Release)''' for Windows is available here: <br />
http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/17.0.6esr/win32/en-US/
If you will be installing that version on a PC which already has a different version of Firefox installed, you will need to create a new Profile fir the ESR version. Let us know and we'll tell you how to create a new Profile.

What steps are needed to put a song on Itunes

Can someone tell me the steps to do inorder to put a song on iTunes. Is it possible if you arent with a record company or if its copyrighted

Take a look here:
http://www.apple.com/itunes/content-providers/music-faq.html
You will need to own or have licensed the copyright to any song and recording that you wish to sell.
Regards.

Hey! i wonder what steps are need to set up an iphone or an ipad as an Airport Express device, so it uses its wifi capabilites to capture a music stream, being conected to a pair of speakers in my living, or in my bedroom ?

I know that i can receive in my iphone the streamed music of the itunes library but this happends as an indepent music stream from the one already playing in the computer
I would like those to be in sync:
so i ca n set my whole house under one music stream, with my 2 iphones4, my ipad, and 1 airport express. plus the local pc in my offifce,
The airport express is hooked at the livingroom with a 4.1 set tha rocks.
my local pc is hooked to a Sony 5.2
then mi iphones could be at the master room and the other in the kitchen.
while managing the 4 individual streams with independent volume levers.
justa as if they where all airpor express devices
Is understood that the iphone 4 obviously exceeds the technological requirements to achieve such a task. !

you should be able to do what you want using Airfoil.

I receive the error "axError.gifSorry, your device does not meet the system requirements that are needed to support BlackBerry App World

Hi My name is Tibor Madarasi i purchased a Blackberry 8900 brand new i can't install app world i instaled the updates for this phone (v4.2.0.85)still can install app world i receive the error "axError.gif Sorry, your device does not meet the system requirements that are needed to support BlackBerry App World." I'm using O2 network in London UK Please advice me Regards
Message Edited by MichelleK on 06-15-2009 09:53 AM

ffbizz wrote:
I hate this bold 9700 series 2 no carrier and find it to be a pathetic product backed up by even more pathetic support so I have decided to use it as a torch. There is an app for this but it requires app world first. Are you trying to say that I MUST have a carrier and they will resolve this issue but otherwise RIM cannot do anything about their own product?
Hello and Welcome to the Forums!
We are so sorry that you are having so many difficulties. While many experience the same (a search here will reveal that fact), there are also many who have very positive experiences with their BB. Not every device is suitable for everyone -- which IMHO is why there are so many choices.
In addition, but for AppWorld, front line support for BB's is, by contract, not provided by RIM. The carriers and authorized resellers are responsible for front line formal support to end users. It is possible to bypass your carrier and seek assistance direct from RIM, but such involves fees since you are bypassing your support agreement with your carrier. The "Support and Services" tab toward the top of these forum pages provide information about that. But, if you do go through your carrier for support, they can escalate into RIM at no fee to you if they so choose to.
As to AppWorld Support (beyond what we volunteer to provide in these forums), that is available via this portal:
https://www.blackberry.com/CSOHelp/index.do?ft=generic
If you choose to submit to them in this manner, then please use, in the "Please select a component:" field, the AppWorld Billing/Payment selection. Any other selection will simply route you back anonymously to these public forums.
As to your question, RIM and the carriers both participate in AppWorld. My suspicion is that the carriers get a portion of the costs for the apps that are vended via AppWorld -- but that's just my suspicion. Hence, the use of AppWorld indeed requires a carrier (and, indeed, the proper data plan level from them).
But, AppWorld is merely a portal, vending apps that are (for the most part) developed by others. As such, it is not the only portal in the world for BB apps. There are a few, I think, apps that are exclusively vended via AppWorld...but I think that number is rather small. Consequently, if you desire an app that will allow your BB to function as you desire, you should seek out alternative vending portals. There are plenty.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hey there i downloaded apps using another apple id than the one am using right now and i need to update the apps they keep asking me for the old one that i dont have any more what to do please

Hey there i downloaded apps using another apple id than the one am using right now and i need to update the apps they keep asking me for the old one that i dont have any more what to do please

Apps are permanently tied to the ID used to purchase them.
Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and re-set th password for the old one.
Then, log into the app store with it and update the apps purchased with that ID.

Just got a new Iphone 5s. On my Iphone 4 I had to double click to show what apps were running and then to hold my finger on an app to deactivate it. Do you need to deactivate the apps on the 5s?

Just got a new Iphone 5s. On my Iphone 4 I had to double click to show what apps were running and then to hold my finger on an app to deactivate it. Do you need to deactivate the apps on the 5s? If so how do you do it.

Double tap the home button to reveal the "Recently used Apps" then slide the App preview (not the icon) upwards to quit the App.

On several of my apps my iPad 2 w/ IOS 4.3.3 said I needed to update the apps and the updates were for ios4.3.3 but now the apps don't work at all after updating. They just flash on the screen but don't stay displayed. What is going on?

On several of my apps my iPad 2 w/ IOS 4.3.3 said I needed to update the apps and the updates were for IOS4.3.3 but when the update was complete the apps would no longer work. They would just flash when I tapped the screen to bring them up but will stay displayed. What is the problem?

I Also have this problem!!
In my situation, the screen simply started exhibiting the same symptoms a few weeks ago (early February) for no apparent reason. At first I thought the screen was dead, but discovered the heat solution by accident. Now I turn it on and keep it from going to sleep until I go to bed. Thank goodness the battery is still awesome on this thing.
I bought it new and still has the original screen, I keep it at home (never below 62 degrees). Coincidentally, this happened a day or two after the expiration of the warranty!! Any help figuring this one out would be eternally appreciated.
iPad mini retina Wi-Fi, iOS 8.1.3

What steps are needed to configure the apps tier after a db-only clone?

Similar Messages

Maybe you are looking for