What systems are successfully using PPRO 6.02 please?

hello all,
i am very interested in upgrading to cs6 PPRO,
however, the forums seem to be full of threads
about issues/problems resulting from the release
of cs6 and the subsequent updates...
cuda issues (MPE has to be turned off)
white screen, locking up issues
registry issues
AME not completing exports
however, not everyone's systems are hurting...
there are reports of 'no problems here' using cs6
is it possible for 'successful users' of PPRO cs6
to post their computer specs and which version of PPRO cs6
they are using...
this might help isolate which computers/os/graphics card/ etc. are/are not having
success with the different releases of PPRO cs6...
i hope this thread helps all of us figure out what's going on
have a great day...
jeffrey

tfi productions 44 wrote:
hello all,
re: tclark513's statement about lasvideo having to do registry fixes:
if you were experiencing issues and then found a fix/workaround
and now you feel your system is stable under cs6
please let us know that, too...
thanks a bunch,
jeffrey
Sep 6, 2012 3:04 PM in reply to zuccon123
Report
OK I found the performance issue with 6.0.2 atleast so far that I am seeing are the Hyperthreading cores are not being utilized on Windows. I will list the registry changes below. Unfortunately these will not work on OSX.
I will also insert image so you can see the registry locations for each.
Type Regedit in the search. Go to the following location
HKey_Local_Machine\System\CurrentControlSet\Control\Session Manager\Memory Management
Change the Large System Cache from 0 to 1. Right Click on Large System Cache and select Modify. Change Value data from 0 to 1 and hit ok.
The Core parking requires searching for the Following Registry Key.
0cc5b647-c1df-4637-891a-dec35c318583
- Go to Regedit
- Find this key by selecting Edit and then Find at the top:- " 0cc5b647-c1df-4637-891a-dec35c318583 "
- Within this key, there is a value called: " ValueMax "
- This value represents the % number of cores the system will park - the default 100% ie: all Cores are potentially park-able
- Change the value from 64 to 0 so the " ValueMin " and " ValueMax " are both zero
- You will have to find the key a few times and repeat the process for each time it is found - the number of instances will depend on the number of power profiles in your system
So Far the Playback performance after those changes is back to normal.
Eric
ADK
PLEASE BE CAREFUL AND BACK UP WHAT YOU WANT TO KEEP.

Similar Messages

What Systems are the Pros Using for Premier, After Effects, and SpeedGrade?

I bought the full Creative Cloud in hopes of making a career for myself in audio/visual editing. The problem is, my system doesn't seem to be able to handle the software, particularly when changing back and forth between the three programs mentioned above. Beyond that, my first project failed to export properly. Moreover, all throughout its development the system lagged badly. And this is after having followed all the preferences recommendations available in the Adobe's tutorials and elsewhere on the Web.
Here's my system:
SYX-P67A-C43: Intel Core i7 2600 (an 8-core unit) at 3.4GHz, with 8 Gigs of RAM (soon to be 16) with a GTX 550 NVidia Card, 1Gig of RAM.
As you can see, this is far in excess of what Adobe claims to be the minimum system requirements. It's obviously NOT.
What systems are the Pros using (like the guys in the tutorials) for Premier, After Effects, and SpeedGrade? Give me the exact machines with all the specs so I can price one up.

...although a little " old" now.....the fundamentals of your machine are still OK to get started IF you : 1. INCREASE your system memory to the full 32 GB....should make a BIG difference in performance.....8 GB is NOT enough, it will HINDER performance. 2. OVERCLOCK your CPU !!!.....many owners of your CPU have been safely running at 4.5 Ghz or HIGHER...some at 4.8 Ghz !!! This OC will make a DRAMATIC improvement as CPU speed is a huge factor in performance. 3. Improve your video card to a new NVidia 970 with 4 GB of video memory. 4. Check and MAKE SURE the power supply in your machine is ADEQUATE to handle everything, esp. if you overclock the CPU....generally 850 to 1,000 watts of a quality make is good. 5. Use a fast storage system...that means a SATA III SSD as your "C" drive, ( boot drive), being a Crucial M550 series,( or, M600 series), OR, a Samsung 850 Pro series SSD, ( more expensive). Other SSDs are NOT recommended, only these two makes are recommended for technical reasons. On this "C" drive, you should have Operating system, Programs, and Windows page file ONLY !! Your "D" drive can be ANOTHER single SSD to be used as a "cache drive" for all the previews, media cache, and cache files that Premier Pro creates PLUS, it can ALSO serve as the "Global Performance cache" used in After Effects. All your media and project files can go on your "E" drive. HERE you would have LIMITED OPTIONS because your motherboard only has TWO SATA III ports, ( which would already be used b the "C" and "D" SSDs). You NOW have only 4 SATA II ports left ......you COULD RAID 0 four 1 TB HDDs off these ports and have a 4TB backup drive connected to one of your TWO USB 3 external ports.....any DVD or Blue-ray can ALSO go on an external port.
However, if you are into spending REAL MONEY !!!.....Go Haswell E and X99 all the way !!...THAT will give you great performance !!

How do I find out what features are not useful in my Classifier?

How do I find out what features are not useful in my Classifier? I am trying to trim down the number of features to speed up the training of my data, I have about 3700 features. I have found the Filter Based Feature Selection Module and have not been successful
in using it. I have looked through all the examples and have not been able to find any examples using the module. Will the Filter Based Feature Selection Module help me to trim features. If so how do I use it?

One way to do this would be is to use a random forest classifier. Feature/variable importance can be obtained relatively easily with random forests.
Here is how you may do it in R.
> install.packages('randomForest') #install randomForest package in R if it is not already there
> library(randomForest) # reference the library
> data(mtcars) # load motor cars data that ships with
#train a random forest
> mtcars.rf <- randomForest(mpg ~ ., data=mtcars, ntree=1000,keep.forest=FALSE, importance=TRUE)
> importance(mtcars.rf)
> importance(mtcars.rf)
#You will see an output like below
%IncMSE IncNodePurity
cyl 16.168645 169.96741
disp 18.672188 260.08722
hp 17.584375 184.95007
drat 6.948743 63.54528
wt 17.818509 254.30347
qsec 4.772889 33.25546
vs 5.303058 24.39064
am 5.210181 17.36626
gear 4.619161 21.55450
carb 8.577037 28.46715
# or plot the importance as follows
> varImpPlot(mtcars.rf)
What this tells you is how important predictors/features/variables like horsepower(hp), weight(wt), no. of cylinders (cyl) is in predicting miles per gallon (mpg).
If you are wondering how the data looks like. Try this
head(mtcars) # gives first few lines of the data set.
mpg cyl disp  hp drat   wt ...
Mazda RX4     21.0   6  160 110 3.90 2.62 ...
Mazda RX4 Wag 21.0   6  160 110 3.90 2.88 ...
Datsun 710    22.8   4  108  93 3.85 2.32 ...
. Try this
Here is a few useful resources:
Random Forest documentation (Check out the pages on variable importance and variable importance plot)
http://cran.r-project.org/web/packages/randomForest/randomForest.pdf
Motor cars data: http://stat.ethz.ch/R-manual/R-devel/library/datasets/html/mtcars.html

What tools are being used with WLS 5.1?

I have been experimenting with WLS 5.1 and it is clear that there are many
steps in developing, testing, and deploying EJBs. What tools are being
used? How do IBM's Visual Age, JBuilder 4, and Visual Cafe EE stack up?
Are there any tools for developing and debugging JSPs?
Thanks,
Mike

Hi folks,
about the "IBM VisualAge 3.02 (Integration Kit)" that Nirav mentions below...
Does this integration kit work with Visual Age 3.5? If not, do you have any tool recommendations for VA3.5 users who are developing apps for WebLogic5.1?
Thanks,
Janet
Nirav Chanchani <[email protected]> wrote:
Mike,
The level of integration between WLS and the tools is as follows (with
VisualCafe being the most integrated) --
1. VisualCafe Enterprise (or the WebGain Studio suite)
http://www.webgain.com/Products/index.htm
2. JBuilder 4 http://www.inprise.com/jbuilder/
3. IBM VisualAge 3.02 (Integration Kit beta up on BEA website)
http://commerce.beasys.com/downloads/weblogic_server.jsp#wlstools
All the integration's support development, local debugging, and local
deployment, but VisualCafe has wizards and like which generate code for the
J2EE specs that WLS supports.
I have read that JBuilder 4 supports JSP debugging but have not tried it yet.
Nirav.
Mike DiChiappari wrote:
I have been experimenting with WLS 5.1 and it is clear that there are many
steps in developing, testing, and deploying EJBs. What tools are being
used? How do IBM's Visual Age, JBuilder 4, and Visual Cafe EE stack up?
Are there any tools for developing and debugging JSPs?
Thanks,
Mike--
Nirav Chanchani
BEA Systems, Inc.

What PSU are you using?

K8N Neo Platinum users (with stable systems!): what power supply are you using?
Please post its specs, namely the 12V rail.
Thanks!
EDIT: Users with a 6800 ESPECIALLY please post! =)

Quote
Mr Woo- I think the question we should all be asking is who is using a high end PSU (30ish 12v amps) and also getting stability problems.
sorry mr woo This thread has been set up by k3nt to acess a specific prob he's having.
Quote
what PSU are you using?
K8N Neo Platinum users (with stable systems!): what power supply are you using?
Please post its specs, namely the 12V rail.
Thanks!
EDIT: Users with a 6800 ESPECIALLY please post! =)
and
Quote
I might be having to replace my Antec Truepower 480. Apparently its 22A on 12V rail is questionable considering my system? See my specs below in sig.
I feel if the thread was as u suggested would just be a mirror of this one
Worst PSU that works on an A64-system?

How do i find what ports are being used.

I need to know how to tell what ports are being used and by what. I recently bought Apple Remote Desktop and have been pretty impressed but I have one computer here that won't let me Observe or Control. I think it is because the G4 in question has a program using port 5900. I need to confirm this is there any way that I can see if this port is being used?
Thanks
Moderith

Hi Moderith--
Welcome to the Apple Discussions.
Look in your Utilities folder for the Network Utility program. Open it, and choose "Port Scan" from the row of tabs in its window. If you're not running Network Utility on the problematic G4, use the G4's IP address. But if you're actually on the G4, use "localhost".
Note that if you check the open ports on the G4 from another computer, you won't see as many as if you check it from the G4 itself. That's because some ports are only local. For example, I have enabled the mail server on my Macs, but only to deliver mail, not relay it. So if I do a port scan using "localhost", I see port 25 open, but it's not open from another computer.
charlie

How do I spot what images are RGB using the separations preview?

2 Questions: 1. How do I spot what images are RGB using the separations preview? 2. Is there an easy way to convert those to CMYK without opening each one in PS? I did this before all the time but I'm rusty and can't remember how I did it. I'm on CS6.

You can one of several methods to find out:
(1) You can use the Links panel. Open the Links panel. Go the panel menu and choose Panel Options. In the Panel Options dialog, Under Show Column check "Color Space". Now when you view your Links panel it will show the color space of all linked images.
(2) You could use Preflight, and set up a Preflight Profile. In the profile, go to the Color section > Color Spaces and Modes Not Allowed, and check RGB. Then any RGB images would be flagged.
(3) If you need to know BEFORE you place the images, use Adobe Bridge. Open the folder where the image are. Use the Metadata panel and view the color space of the images.

HT4211 how can you find out what kb are being used by what apps

how can you find out what kb are being used by what apps there is always alot of kb being used even when I don't use my phone

Go into settings , general, usage and it tells you what the apps use. If your refering to the memory storage of the apps.

What browser are you using with OS 9.x?

Would you all please state which internet browser you are using with OS 9.x and the strengths/weaknesses you are experiencing with it?
I switch back and forth between Mozilla and Internet Explorer but fewer and fewer websites work properly with them. If there is a better browser than those two I would add it to my old Wallstreet running 0S 9.1.
Again, what browser are you using with OS 9.x and what are its good/bad points?
Thanks!
Message was edited by: Paul Stamser

(Almost forgot
I have an iCab filter set up for Yahoo on my OS 9.2.1 iMac.
For the URL string I use (asterisk)yahoo(asterisk)
For the Scripts filter I use the Netscape identity and have all versions checked except "JScript", and everything is checked in the "Allow" section.
For the Network filter I use the Firefox identity and have the HTTP "referer" set to "Always".
I don't use Yahoo Mail much on that machine, but those settings allow me to use the Address book to select addresses and send messages with attachments. (I'm not sure about viewing attachments, though, and I'm almost positive that address auto-complete doesn't work.)
Cheers,
K.S.
(I use iCab 3.0.5)
Message was edited by: K.S.

What Camera are you using?

Hi,
What camera are you using for you shot?Let share about the Semi Pro cam together: Fix Lens with manual Focus and Zoom,Affortable Price...

Well, before I got my Digital Rebel XT I dreamed of the Powershot S2 IS. Then the S3 came out...but I was hookoed on my Rebel XT. I hear the S5 is a monster...
Now, my 20D is probably more prosumer. I wouldn't call it a pro camera, although it is legendary for it's use on the sports areana and weddings by pros. For my money, any camera with a pop-up flash and automatic modes is not a pro camera. Having said that, I hope no one starts throwing eggs and tomatoes!
-Scott

What launcher are you using?

What launcher are you using with your Z2?
I'm on Nova Launcher Prime with HERAcon theme and icons.

Apex Launcher

What application are you using for student collaboration?

The only part that is missing from iTunes University is real time student collaboration. What application are you using to bridge the gap? Thanks, Ed

Yeah, I'm not sure I know what you mean either.
Q: If you're asking which server-side code to use on Windows IIs Servers?
A: ASP or ASP.net and MSSql. Since Microsoft built these languages, you would get the best support from MS Expression.
If you're asking for software that helps you write code, you'll need to be more specific about which code you want to write and for what purpose.
Nancy O.

Is there a way to decipher what chords are being used in an audio track?

I use logic pro x software and I was looking at this piece of audio. It's a synth lead and I wanted to create a bass to go with it however it's hard to work out the chords used so I was wondering if there are any add ons or something that can tell me what chords are used in the audio track. Im looking for something kind of like the BMI counter but for chord recognition. Can anyone help me! if not would anyone be able to decipher them for me? thanks

Not that i am aware of.. Not for Audio tracks.. Midi tracks yes, Audio no....
However there are 3rd party apps/websites that might do the job....
http://www.allmyfaves.com/blog/music/chordify-turns-any-music-or-song-into-chord s/
http://chordify.net/pages/how-to-use-chordify/
and maybe even....
http://play.riffstation.com
if its a relatively well known song....

How to see what Tables are being used in all reports

Post Author: tmashley
CA Forum: Crystal Reports
Hello,
How can I see what database tables are used in all my online reports? I have around 1000 reports posted to Enterprise over 6 different datasources. If possible I would like to see the fields within those tables that are being used to.
I am using Crystal Reports XI Release 2
Any help is appreciated
Thanks,
Tom

I don't think you can see the databases of the reports unless you download the report onto your pc as a Crystal Report format and then open it under Crystal Reports.
This way it will open the report within Crystal Reports and will show you the datasource it is coming from.
I doubt if you can see them online.
Kind Regards
Jehanzeb

How do I determine what applications are communicating using SMB?

I would like to try to determine if there is a way to determine what applications are using SMB to communicate to the network. Any thoughts?

Thanks Kurt. We are attempting to find the cause of the notorious two-minute spinning beachball delay. Not sure if you are aware of this problem, but it holds up Finder, Adobe InDeisgn, and other applications for two minutes while it is waiting for a response from a windows server. It shows in the log as:
1/4/12 3:29:25 PM
kernel
smb_iod_sendall: Timed out waiting on the response for 0xa0 mid = 0x3b
Very frustrating. While Lion seems to have fixed the issue for some users, EMC is telling us that Lion will not play nice with the Celerra share we use.

What systems are successfully using PPRO 6.02 please?

Similar Messages

Maybe you are looking for