What Table for FLB1 Data?

What table can I use in SE16N to find the lockbox totals such as checks applied, partially applied, etc?

Hi, Jimmy.
There is a report for lockbox totals in standard, it is called RFEBLBR1. These are tables that are related to this report: FEBKO, FEBEP, BHDGD and SSCRFIELDS. Check these tables for the fields you are looking for.
M Trein

Similar Messages

Table for material data tab

HI,
what is the table for material data tab in PO?
Regards,

Data at item level i.e. may be material data, invoice data is stored in EKPO.
Regards,
Sarang

Tables for Credit data

Hi all,
please tell me the tables for Credit data.
Thanks,
kishore.

1) Check to see if there are any entries in table S066 and S067. These SIS tables hold the credit data for sales order value and delivery order value.
hope it helps

Tables for Contract data

Hi all,
if you know any tables for contract data(For Contract report),
please tell me.....
Thanks,
kishore.

VBAK-contract header
VBAP-contract item
VEDA-changed contracts
KONV-condition records
MARA-material related to contract

Tables for Budget data

Hi,
Please provide the base tables for Budget data
thanks

hi Arun,
check these
BPGE (overall budgets),
BPJA (annual budgets) and
BPPE (period budgets).

The table for storing data for infocube and ODS

Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!

Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit.

Method :Want to Use Z-Table for Accessing Data

Dear All,
I am new to BADI. I have implented one HR-PAYROLL Badi.
In this BADI I am having one method . I want to Use One Z-table for accessing data from
that table . Not able define the table in method.
Kindly tell me how to do it .
Thanking you in Advance
Siladitya

Hello Siladitya
I assume your problem is the definition of an itab for selecting data from your Z-table. In case of classes you have to use table types and workareas, e.g.:
METHOD name_of_interface_method.
DATA:
lt_itab TYPE TABLE OF <name of z-table>,
ls_record TYPE <name of z-table>.
SELECT * FROM <name of z-table> INTO TABLE lt_itab.
LOOP AT lt_itab INTO ls_record.
ENDLOOP.
ENDMETHOD.
Regards
Uwe

Dynamic Internal Table for reading data from external file

Hello All,
The task was to create a internal table with dynamic columns,
Actually this is my first task in the WebAS 6.20, my program is based on input file provided by user with certain effort. this file can have different effort for a one yr to five year frame..
I needed to read the raw data from file, based on months create a internal table to hold the data, after this i need to validate the data...
I have browsed thru dynamic internal table topic, but couldn't find any dynamic appending structure, the dynamic structure would contains 12 month fileds.
can any one help me in getting my task completed..
Thanks
Kumar

Hi,
I see that you posted the same question a couple of days ago at Dynamic Internal Table for reading data from external file Didn't Charles's response address your problem?
Regards

System table for Additional Data - Basic data text (MM03)

Hi
How can I get the system table for stroring data in MM03 in "Additional Data" the "basic data text" ?
Thanks in advance.

Hi,
CALL FUNCTION 'READ_TEXT'
         EXPORTING
            CLIENT                  = SY-MANDT
            ID                      = 'Z610'
            LANGUAGE                = SY-LANGU
            NAME                    = V_TDNAME
            OBJECT                  = 'VBBK'
            ARCHIVE_HANDLE          = 0
         IMPORTING
            HEADER                  = I_TEXT_HEAD
         TABLES
            LINES                   = I_TEXT_LINE
         EXCEPTIONS
            ID                      = 1
            LANGUAGE                = 2
            NAME                    = 3
            NOT_FOUND               = 4
            OBJECT                  = 5
            REFERENCE_CHECK         = 6
            WRONG_ACCESS_TO_ARCHIVE = 7
            OTHERS                  = 8.
Regards,
Bharani

Error while filling set up tables for 2LIS_11 data sources

hello All ,
I tried to fill setup tables for 2LIS_11 data sources in OLI7BW , but the job RMCVENUA is getting cancelled. below is the Job Log ,
Job started
Step 001 started (program RMCVNEUA, variant &0000000000005, )
Start of order processing
Error determining rate: foreign curr. local curr. INR date 10.09.2008 (doc. 1)
Job cancelled
Is there any setting required in R3 side before filling setup tables of SD ?
I am able to fill the setup tables for 2LIS_05 ( Notifications) successfully.
Regards ,
Amol Kulkarni
Edited by: Amol Kulkarni on Dec 4, 2008 3:59 AM
Edited by: Amol Kulkarni on Dec 4, 2008 4:00 AM

Hi,
one of the sales document currencies is not maintained properly in the system and therefore its failing.
you need to correct those documents before filling the set up tables.
Either you can chose the option fault document toleration limit to 1000...so that 1000 records wrong records can be tolerated or you have to crrect it first before filling up the set up tables.
This will generally happen in test systems.... but very rare in production...so try to maintain currrency again in the system.
generally you will see the sales doc number in the error for which its failing.
May be at the time of filling some óne was working on some sales document and tried it save it.
correct that doc and fill the set up tables again.
Thanks
Ajeet

Table for Sales datas assinged to Equip/Floc

Hi
I need a table for Sales datas like sales org,distribution channel,divition,sales office,sales group assigned to equipment master,
Points assured
Thanks
Seenu

hi seenu
yes you are wright the sales organisation, DC,Divison is strored under the ILOA table only , since in equipment its being picked from the view table,you can interrelate with FL and equipment
regards
thyagarajan

TO FIND TABLES FOR MASTER DATA TRANSACTIONS

HI , When we create a customer, the information is updated in structure RF02D and some tables like KNA1 are updated ..
How can we find the tables for master data transactions.?
please reply...
thanks.

Hi,
I entered into the TC : ST05, Activated the trace then I created a customer, then I came back and deactivated trace, then I clicked on display it gave me a list ( yellow color list ) ... Wat do u mean by update methods here ...
Thanks
SK SIDDIQUI

Extractors/ Setup Tables for Master Data

Hi Experts,
I am not sure if the extractor enhancement methods, setup table initialisation for Master Data different from transaction data.
I am trying to do a delta init with initialisation of Setup table (OLI7BW) for 0CUSTOMER_ATTR. And I am not able to see any records in RSA7. Althought RSA3 shows 10 data packets and 1000 records.
What does that mean.
What I want to achieve is all the records a fresh for a few master data datasources since they were refreshed last month. Since then they were not being used.
Kindly help me as soon as possible.
Thanks in advance.

Hi Priya,
I am not sure if the extractor enhancement methods, setup table initialisation for Master Data different from transaction data. -
For your information there is no conecpt of intialisation for master data.
I am trying to do a delta init with initialisation of Setup table (OLI7BW) for 0CUSTOMER_ATTR. And I am not able to see any records in RSA7. Althought RSA3 shows 10 data packets and 1000 records.
What does that mean.
As said there will be no setup tbale concepts for masterdata, the changes for masterdata follows the delta pointer concept(i.e whenever changes to standard masterdata table happens the message class trigger the delta pointer for those changed records and post in RSA7).So always u see in RSA7 the changed records for masterdata tables
What I want to achieve is all the records a fresh for a few master data datasources since they were refreshed last month. Since then they were not being used.
i didn't get abt this question can u eloborate
let me know if i answered ur queries

Problem while looping through record set and tem table for matching data

hi I am using one record set and ane temp table and looping through both to find the match between dates.
If date matches then it shud do some processing otherwise it will return default values(null values).
FOR i IN student_rec .FIRST..student_rec .LAST          /*student_rec.school_date has 01-MAR-2012,02-MAR-2012,03-MAR-2012,04-MAR-2012,05-MAR-2012*/
LOOP
l_return_out.school_date := student_rec(i).school_date;
l_return_out.marks_obtained := student_rec(i).marks_obtained;
FOR i IN selected_dates .FIRST..selected_dates .LAST          /*selected_dates has 02-MAR-2012,03-MAR-2012,05-MAR-2012*/
LOOP
DBMS_OUTPUT.PUT_LINE(selected_dates(i));
IF selected_dates(i)=student_rec(i).sett_date
THEN
EXIT;
end if;
     ---------call procedure P1
-----------get output as ret_val1               /*getting ret_val1 as 10 for 02-MAR-2012,03-MAR-2012,05-MAR-2012 */
     ----------call procedure P2
---------get ouput as ret_val2               /*getting ret_val1 as 20 for 02-MAR-2012,03-MAR-2012,05-MAR-2012 */
if ret_val1>0 0r ret_val2>0
then
l_return_out.has_csts := yes;
l_return_out.cst_present := 10;
l_return_out.cst_absent := 20;
else
l_return_out.has_csts :=No;
l_return_out.cst_present:= 0;
l_return_out.cst_absent := 0;
end if;
end loop;
l_return_out.has_cst := student_rec(i).has_csts;
l_return_out.cst_missing := student_rec(i).cst_present;
l_return_out.cst_existing := student_rec(i).cst_absent;
PIPE ROW(l_return_out);
END LOOP;
RETURN ;
I am expecting this as result
school_date     marks_obtained     has_csts     cst_present cst_absent
01-MAR-2012     20
02-MAR-2012     30          yes 10          20
03-MAR-2012     40           yes 10          20
04-MAR-2012     70
05-MAR-2012     60          yes 10          20
but this as result
school_date     marks_obtained     has_csts     cst_present cst_absent
01-MAR-2012     20
02-MAR-2012     30
03-MAR-2012     40
04-MAR-2012     70
05-MAR-2012     60
Can anybody please highlight the mistake i am doing while processing the logic??
Edited by: 942390 on Jul 13, 2012 8:44 PM
Edited by: 942390 on Jul 13, 2012 8:45 PM

I am getting a set values from a record set....student_rec
and on pipelining this record set from 1st till last
i am getting this
school_date     marks_obtained     has_csts     cst_present cst_absent
01-MAR-2012     20
02-MAR-2012     30
03-MAR-2012     40
04-MAR-2012     70
05-MAR-2012     60
so initially has_csts, cst_present and cst_absent is null for all dates.
now have a temp table of selected_dates(which contains these dates 02-MAR-2012,03-MAR-2012,05-MAR-2012)
now I am want to populate has_csts, cst_present and cst_absent with data only for those dates which is present in selected_dates temp table(02-MAR-2012,03-MAR-2012,05-MAR-2012) and that too has_csts, cst_present and cst_absent will be populated with some condition (based on the values from procedure got from P1 and P2).
so want result set to look like
school_date     marks_obtained     has_csts     cst_present cst_absent
01-MAR-2012     20
02-MAR-2012     30          yes 10          20
03-MAR-2012     40           yes 10          20
04-MAR-2012     70
05-MAR-2012     60          yes 10          20
so what could be the possible solution to obtained this....

How to create tables for control data

HI
How to create tables for controls of types of data (screen control)? what is the process for this
Regards,
Anil

Well, do you want to do it the easy way? If so, then just create a table maintenance program. You can do this via SE11, utilites, table maintenance generator. The table maintenance will be generated and you can then maintain the table via SM30.
If you want to go the more challenging way, you can write your own table maintenance program using a table control on your screen. You can use the table control wizard to help you along.
Regards,
Rich Heilman

What Table for FLB1 Data?

Similar Messages

Maybe you are looking for