What target address does IPM select if the target IPSLA device is a multi-VRF CE?

What target address does IPM select if the target IPSLA device is a multi-VRF CE?
With IPM 4.2.1 it is not possible to select the correct target IP address when configuring a collector between two multi-VRF devices. It looks as if the primary management address for the target device is used in the collector configuration which, of course, belongs in a different VRF entirely.

One example, and there may be others, is the (free) DynDNS dynamic DNS service which publishes a domain name for the WAN port of your router which can then be resolved, like all other domain names, to the actual IP address of the WAn port of your router. This service provides a solution to the problem of having a proper domain name in cases where your public IP address changes over time. Unless you pay for a static IP address, virtually all ISPs change your public IP address over time.
So, you can register for a free DynDNS account at www.dyndns.com and that is how you come up with the User: and Password: information; use whatever User and Password you register at dyndns.com with.
The first part of the hostname you can define as you wish, subject only to someone else having used it previously, and the remaining parts of the domain name might be "dyndns.org" or one of the other domain names provided by the DynDNS service. So, you could publish, via DynDNS, the name of your public IP address as, for example, joehlam.dyndns.org however you might want something less descriptive or more vague.

Similar Messages

  • Error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project._

    Hi to all,
    I tried to compile my .sln with VS2010 but I had this error.
    error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
    It occurs only compiling with win32 configuration but not with x64 one.
    Ideas?
    Thank you in advanced

    In which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
    If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
    Visual Studio 2012 Compatibility
    Visual Studio 2013 Compatibility
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • When I click on a link the address does not display in the location bar in the new tab. Which makes the back/forward button and refresh buttons unable to be used

    When opening a link any link from firefox address does not display in the location bar. Even when navigating forward from there the address does not show back/forward button and refresh all rendered unable to be used

    Do you have that problem when running in the Firefox SafeMode? <br />
    [http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this: <br />
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • HT5706 Help!!  First of all I am a senior and have no idea what I am doing.  Turned on the Apple TV and it said downloading the latest update.  It show the apple symbol and below a empty download line.  Nothing seems to be happening.  Is it downloading?

    Help!!  First of all I am a senior and have no idea what I am doing.  Turned on the Apple tv and it said downloading the lastest -cannot remember the rest.
    There was a Apple symbol and a dowmload space under it.  Nothing is happening.  It has been about 25 minutes.  What do I do??

    It probably did not turn itself off. It most likely went into "sleep".
    Did you try to restart the Apple TV? That is what solved the problem for me.
    Go to the main AppleTV menu - you might have to press the Menu button a couple of times to get there - select Settings, then Select General, scroll down to Restart and select that.
    As long as you don't have a "Do not unplug" message on your screen, unplugging the power cable, waiting a minute, then plugging it back in should accomplish the same thing. I always prefer using the menu method over unplugging.
    If that doesn't work, I fear you might have to contact Apple. They will likely tell you to restore your AppleTV to factory settings. That will be a pain in the neck since they will need to walk you through it. They might do that for you at an Apple store. I'm a senior citizen too, and it's easy for me to look helpless - even though I've worked in computers and networking for a very long time.
    Sorry I can't offer any better advice.

  • What are Apple doing to compensate for the damage caused by the iPhone 4 bumper?

    I have noticed damage caused by the bumper.
    It is NOT foreign object but caused by the hard plastic on the inside of the bumper
    (plese do not come out with rubbish like steel is harder than plastic) I am not stupid and I know that the damage matches the pattern of the bumper skeleton.
    What I want to know is when are Apple going to deal with this and replace my phone?
    I dare not go to the so called Genius bar in Milton Keynes as they have adopted a Dixons style "fob off" attitude and I will become rather angry with them.

    Re: What are Apple doing to compensate for the damage caused by the iPhone 4 bumper? 
    15-Jun-2011 15:15 (in response to sfrommilton keynes)
    o Steel is harder than plastic, so the bumper has not caused the damage.
      - You call it rubbish
      - The world calls it physics
    You are totally wrong.  Please go back to School.
    o You can deny physics
      - but that will not change reality.
    You can go to School but that wont change reality.
    o Your description of your Genius bar is incomprehensible
      - I recommend you go to the Genius bar leaving the chip on your shoulder at home and tactfully explain what you think is your issue.
    I recomend you find a day job ans stop TROLLING peoples threads.
      - I've never had them fail me or be the least bit confrontational.
      - But if you act like a jerk then I couldn't predict what would happen
    Yeah because you were there.  Are you having some kind of relationship with the company?  I think you sleep with an Apple under your pillow.
    Finally I am a consumer who has paid for a product that is not living up to expectations.  The plastic skelton is hard and abrasive (I know what that means as I went to School) Abrasion's are marking the product. 
    This is not the only time this has been reported and as such I have no issue with particles entering the bumber.  This has happened from the start (when I used Apples stupid bumber case)
    Please don't patronise or TROLL others threads.
    <Edited by Host>

  • Run As Account does not exist on the target system or does not have enough permissions

    We are getting below alerts,
    Run As Account does not exist on the target system or does not have enough permissions.
    I know we can create a Run As account with low Privilege can fix this issue ,
    http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
    My question here is there is any other way to fix it. I tried giving below permission for scom_act account (we used for agent installation and has local admin rights) but still same issue and
    also i tried with sysadmin access for scom_act as well but no luck still having same issue , any solution would be welcome
    The min. Privilege for monitor SQL server
    DB Server Level
    a.  VIEW ANY DEFINITION
    b. VIEW SERVER STATE
    c.     VIEW ANY DATABASE
    Each DB
    a.  SQLAgentReaderRole database role.
    b.  PolicyAdministratorRole database role

    Check below link
    http://blog.coretech.dk/msk/run-as-account-does-not-exist-on-the-target-system-or-does-not-have-enough-permissions/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • I have Windows computers.  My email is Outlook Express and Windows Live Mail.  What email service does Apple use on the MacBook Pro?

    I have Windows computers.  My email is Outlook Express and Windows Live Mail.  What email service does Apple use on the MacBook Pro?

    Hi..
    The native Mac Mail app. Comes pre installed on all Macs.
    http://www.apple.com/support/mail/

  • What environment variables does Firefox use in the Windows environment?

    What environment variables does Firefox use in the Windows environment?

    The people who answer questions here, for the most part, are other Firefox users volunteering their time (like me), not Mozilla employees or Firefox developers.
    Please contact the Mozilla developers for more questions.

  • Is ExceptionDeployer run from the target computer or just pointed to the target?

    Is ExceptionDeployer run from the target computer or just pointed to the target?  I created a package with CCP.  No problem pushing the .pkg in the Build folder to the target using Apple Remote Desktop.  Then I copied the Exceptions folder to /Applications/Adobe/ on the the target machine and ran:
    sudo /Applications/Adobe/Exceptions/ExceptionDeployer --workflow=install --mode=post
    The output says
    Starting the ExceptionDeployer...
    Starting installation of payload (AdobeHelp)
    But then it just hangs.
    What could I be doing wrong? Is this the correct documentation?: http://helpx.adobe.com/creative-cloud/packager/using-exceptions-deployer.html

    Thanks I still got all the notes in my iphone... but at the moment I cannot sync or manage my iphone in itunes as itunes says that I should restore my iphone or set up a new iphone...
    If I do... I think I may lose all the notes which at the moment in my iphone perfectly... Itunes just does not pick up my iphone.. I tried to uninstall itunes and installed it again... but the same problem appears...
    Anyone has some ideas?!Thankssssssssssssssss!

  • Scale does not work for the target movie when using a poster movie

    Hello,
    I have various size video files that I want to scale to a certain display area on a website. I'm using the scale="tofit" attribute. It works fine for the poster movie but when the target movie is loaded it does not scale! Is this a QT bug or by design? Is there a workaround to this or am I doing things wrong? All help is greatly appreciated.
    <object classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" width="489" height="280" codebase="http://www.apple.com/qtactivex/qtplugin.cab">
    <param name="autoplay" value="false">
    <param name="controller" value="true">
    <param name="href" value="heaven.mov">
    <param name="pluginspage" value="http://www.apple.com/quicktime/download/indext.html">
    <param name="target" value="myself">
    <param name="type" value="video/quicktime">
    <param name="src" value="movies/PosterTest.mov">
    <param name="scale" value="tofit" >
    <embed src="movies/PosterTest.mov" href="heaven.mov" width="489" height="280" autoplay="false" controller="true" border="0" pluginspage="http://www.apple.com/quicktime/download/indext.html" target="myself" type="video/quicktime" scale="tofit">
    </object>
    Dell inspiron 8200   Windows XP Pro  

    After quite a lot of Googling I found what I was looking for. This solution was quite hard to find. I found it on http://blog.deconcept.com/2005/01/26/web-standards-compliant-javascript-quicktim e-detect-and-embed (I'm using Geoff Stearns's script to embed my movies, it works great!)
    Anyway here is a url to the final solution:
    http://developer.apple.com/documentation/QuickTime/WhatsNewQT5/QT5NewChapt1/chap ter1_section32.html

  • ORA-0094 Table or view does not exists in the target modul

    Hi all,
    I have created a source module and on target modul. I try to make mapping between 2 tables, using Joiner. I will get the message: VLD-1012: attribute in inoutgrp1 does not match with the repository attribute. That is the first problm.
    But looking in the table, which i get from mapping, will get the above message.
    Which privileges must the source schem give to the target schem to be able to look at the table.

    I have granted the tables from sourec schm to target schema, but i got the same problem.
    If i loggin als target user i can select all he table from source user, but as target user cannot see tha tables whcih i will used from source schma.
    I there any other problem, which i dont know about it. The laocation is lso properly defined.
    Thanks

  • Using Firefox 4.0 Beta 4. When I open a link in a new window, the web address does not show in the location bar. Why?

    When I open a web page link in "a new window" the link opens, but the web page information does not appear in the location bar. It is blank. If I open the link in a new tab, there is ho problem.
    Further, if a open a link from the tab without a location in a new tab on the same window and then go back to the original tab, the location bar fills with the web address.
    Have done this starting in several locations, so it not location dependent.

    That behaviour is likely top be caused by an add-on, and in your case the likely culprit is IE Tab 2, the various versions of IE Tab have caused problems with Firefox 4 beta including issues with the location bar not being updated.
    You can test to see if IE Tab 2 is causing your problem by disabling it and then seeing if the location bar in a new window shows the address. If it is not that add-on causing the problem, see [[troubleshooting extensions and themes]].
    For info, the IE Tab Plus add-on has been updated recently to improve compatibility with Firefox 4 beta, you may want to try that one instead. The latest version is available from http://coralietab.mozdev.org/installation.html

  • In contacts the country field of the address does not appear in the print pre view or or in the printed label. any suggestions  why or who to correct ?

    In contacts on my new i Mac the country field does not show in the label print pre view or the printed label.
    Any suggestion of why this is happening?

    I have found a solution - no bug. See this link
    Address book

  • Years and years ago I signed up for firefox sync. I have no idea what the password is so I can use it on the new computer. I also do not know what email address I was using at the time.

    Years and years ago I first started with firefox sync. I have no idea what the password is. Nor do I remember the email address I was using at the time. I now have a new computer and can't set up the firefox sync. I can not be the only person to have had this problem.

    Unless you remember your "Username" (Not Email) then the only option I'm aware of is to Create a new account
    *Request [https://account.services.mozilla.com/forgot Forgotten Password] (Username Needed)
    *Create [http://www.mozilla.org/en-US/mobile/sync/ New Account]
    The whole point of Firefox Sync is to save/access data between different devices - Your Username should be listed on one of your Devices, unless you just happen to replace all of them at the same time.
    If you could gain access to an account w/ atleast knowing the Username/Email Address/Password then what would be the point of "Security"
    Thats why [http://www.steganos.com/us/products/for-free/locknote/overview/ LockNote] is handy to jot down account notes and secure it w/ a password... stick it on a thumbdrive.

  • How does Check Names in the Target Audience picker work?

    Can anyone tell me how the Check Names button in the Target Audience picker works? We are having problem with a specific audience in one of our web applications. I don’t think the problem is the actual audience though:
    The Target Audience is a global target audience named ”XYZ”. It is compiled and contains member. When an article is tagged with this audience all works fine as long as we use the Audience Picker dialog. But, when using the Check Name button the audience
    is not saved. This happens when I edit properties on the article (not customized UI) and also when I edit the article in a customized UI. No ULS messages.
    I have read that the Target Audience Picker searches for matches in AD Distribution groups, SharePoint groups and Global Audiences. When we write “XYZ” in the audience field and presses the Check Names button one suggestion is displayed, named “XYZ”. When
    I write “XYZ N” and press the Check Names button several suggestions are displayed: 4 “XYZ” and a couple of other suggestions “XYZ xx…” etc. We have no SharePoint groups starting with “XYZ”, we have no AD Distribution Groups starting with “XYZ”, and we have
    only one Global Audience starting with “XYZ”. Where are all the “XYZ” suggestions coming from? Can anyone help, please?
    We are using SharePoint 2010.
    Best regards Heidi Lillebuen

    Hi Heidi,
    The target audience picker is similar to people picker, it searches the content of User Profile Service to find the matching users or groups.
    I did a test based on your description. In my testing, everything worked well.
    Please check whether there are some users whose display names are like ‘XYZ ***’.
    Please create a new global audience using a different name, compare the result.
    I hope this helps.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

Maybe you are looking for