What tasks I should select in NWA Configuration Wizard for PI component

Hello,
I'm in the stage of setting up the NetWeaver 2004S SR2. I've logged to the Net Weaver Administration console. According to documentation, to properly configure PI component I should execute Configuration Wizard task. The problem is that documentation is not very specific on what exact tasks I should execute, so I would like to get some advise from the community.
All tasks I can see are:
BI_00_This wizard will execute Postinstall steps of technical configuration of BI-Java Initial  
DI_Allinone_This wizard run all post installation steps for DI, CBS, CMS and DTR. Initial  
DI_CBS_This wizard run all post installation steps for CBS. Initial  
DI_CMS_This wizard run all post installation steps for CMS. Initial  
DI_DTR_This wizard run all post installation steps for DTR.
DI_This wizard sets the Oracle Parameters as per CSN note: 848708 Initial  
MI_00_This wizard will execute Postinstall steps of technical configuration for the NetWeaver Mobile Infrastructures
MI_01_This wizard will create User and Assign Dedicated roles  for the NetWeaver Mobile Infrastructure Initial  
MI_02_create JCo Initial  
MI_03_create TCP/IP
MI_04_register Connection Initial  
MI_05_set profile in ABAP Initial  
MI_06_schedule MI Job Initial  
NWA_01_This wizard will execute configuration for local SLD Initial  
NWA_02_SLD system : Connect SLD to CEN (if CEN present)
NWA_03_Creating a connection to the SLD and Setting required authorizations for SLD (CIM client settings)
NWA_04_Creating a connection to the ABAP stack of CEN and Starting heartbeat monitoring Initial  
NWA_05_NWA system : Store access data per each managed Java system (optional) Initial  
NWA_06_NWA system : Register each managed ABAP system to SLD Initial  
NWA_07_creates Destination for Data Supplier Bridge
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage Initial  
PI_01_This template checks if the necessary services are started Initial  
PI_02_This wizard will test the BAPI call to SWF_XI_BPM_AUTO_CUSTOMIZE Initial  
PI_03_This wizard will assign the Application roles Initial  
PI_04_This wizard will Maintain_Technical_System
PI_05_This wizard will configure the integration server for sld Initial  
PI_06_This wizard will create the necessary Destinations in ABAP Initial  
PI_07_Create_RFC_Destinations_in_Java Initial  
PI_08_This wizard will Maintain Http Destination Initial  
PI_09_This wizard will configure Role of Integration server
PI_07_Create_RFC_Destinations_in_Java Initial  
PI_08_This wizard will Maintain Http Destination Initial  
PI_09_This wizard will configure Role of Integration server Initial  
PI_10_This wizard will Register_Queues_NA Initial  
PI_11_This template services are started
I guess I need to mandatory execute PI_XX tasks, but what about others - do I need to execute anything else (I need only PI component to be installed and configured)? Not sure if that makes any difference, but this is the very first time I get into the NWA, so no previous configuration tasks were executed from the Configuration Wizard.
My full system configuration: NetWeaver 2004S SR2 ABAP+Java, Windows 2003 32-bit with MS SQL Server 2005.
Thanks in advance.

Hi Maxim,
Please follow this procedure:
1) Using Config tool Modify VM setting as per requirement (OS and H/W Dependent) Refer note 723909 Java VM settings for J2EE 6.40/7.0.
2) To set Environmental Variable refer Note 314530 - Number of RFC/CPIC connections for external clients. These parameter should be taken care while installing templates
Set these:
     1) gw/max_conn 2000
     2) gw/max_sys 1200
     3) gw/max_overflow_size 40000000
     4) gw/max_shm_req 200 (this is to adjust the memory   allocation)
Profile parameters
rdisp/tm_max_no 5000
rdisp/max_comm_entries 200
ITS
CPIC_MAX_CONV 5000(Should be taken care that it should be set for <sid>adm user
3) Installing Template
Go to home page
http://hostname:portnumber/webdynpro/dispatcher/
Click Deploy and change
4) After This Click Configuration tab and then click Install
For the next tab select scenario PI
And configure template and finally install
5) In case you face any problem while importing please read these notes for altering parameters
Note 314530 - Number of RFC/CPIC connections for external clients
Note 923359 - Collective Note: Configuration Wizard - Template Installer
Hope it will Help you at this stage at development stage
You need to import SAP BASIS Software Component Version into Integration Repository based on your SP Level & XI or PI.
You need to download it from [service market place.|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20 ]
Regards,
Gagan Deep Kaushal

Similar Messages

  • OOT: Configuration Wizard for Business One (Tools)

    Hi All,
    Do you have any idea to download "configuration wizard for business one tools" ? I've try download it, but unfortunately the connection suddenly terminated.
    Somebody like to share?
    Thanks and regards
    (the tools is taken from download menu from this forum)
    Edited by: Susanne Klemm on May 7, 2008 1:51 PM
    Edited by: Philip Eller on May 21, 2008 9:02 AM

    Hi,
    Did you try this link?
    https://www.sdn.sap.com/irj/sdn/softwaredownload?download=/irj/sdn/go/portal/prtroot/docs/library/uuid/1099ac47-4c73-2a10-69af-d11b130cc68a
    Regards,
    Paul SAP Business One Forums Team

  • NWA Configuration Wizard

    Hi
    I am Installing NW2004s SR3 ( which is equivalent to Support Pack 14). Later on my plan is to upgrade to SP15.
    So I would like to know when I need to run Configuration Wizard
    Before Applying SP 15 or After.
    please Help
    Thank you
    With Wishes
    Krishna Kanth

    There no documents.. that's pure common sense
    Basically theres no difference if you configure it after of before the patching.... patching does not remove any configuration done to the system, in some cases exceptions apply but it will be detailed in the FAQ note of each patch.
    So if you do the config on 14 or 15 its the same.
    Regards
    Juan

  • Errors in few of the step while running configuration wizard for PI 7.0

    hi all,
    i have installed Netweaver 2004s (PI 7.0) quality. during installation i had chosen sld option to be my development system as i wanted to use just single SLD.
    now for the post installation steps i had run Configuration wizard. i haven't yet implemented Note : 939592 : PI Usage configuration versus Central SLD as it says first i need to perform all CTC steps.
    now in this i got error in few steps:
    STEP1 : PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage
    the error was: CIM_ERR_FAILED: Object manager is not activated
    PI_05_This wizard will configure the integration server for sld.
    The error was:
    Error: CIM_ERR_FAILED: User credentials are invalid or user is denied access
    PI_09_This wizard will configure Role of Integration server
    Not able to load function SXMB_SET_ROLE_TO_IS( Connect to SAP gateway failed).
    What should i do?
    Regards,
    Priyanshu Srivastava

    Hi Priyanshu,
    "Object manager is not activated" simply means, that the SLD server is not started. So, please, first of all navigate to the SLD URL http://<host>:<httpport>/sld, login with an administrative SLD user -> Admininstration and push the star button.
    Regards,
    Blanca

  • Sharepoint 2010 - Error while running Configuration wizard for SP 2010 server farm

    Hi All,
    I am trying to set up a SP 2010 farm. I have windows server 2008 R2 installed and was able to install SP 2010 successfully. However when I ran the Sp 2010 Products and configuration wizard I am getting the following error at Step 3.
     Failed to create the configuration database.
    An exception of type System.Collections.Generic.KeyNotFoundException was thrown.  Additional exception information: The given key was not present in the dictionary.
    System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
       at System.ThrowHelper.ThrowKeyNotFoundException()
       at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
    I have installed all the prerequisites and I am on Microsoft Geneva Framework 1.0.30624.0 . I saw on a blog that Microsoft Geneve Framework beta 2 will actually cause the above problem. However I encountered the error with Beta 1 version as well.
    Any ideas why this is happening?

    Hello together,
    I get the same error mentioned above while running the configuration wizard.
    My Serverenvironment:
    - MS Server 2008 R2 Enterprise
    - Virtual Machine (Host Machine also R2 Enterprise)
    - SQL Server 2008 -- Cumulative Update 4 for SQL Server 2008 Service Pack 1 installed
    - Prerequisites installed without error (and current versions)
    Error information:
    "Failed to create the configuration database"
    "An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information:
    The given key was not present in the dictionary"
    The logfile has the following entry:
    7/2009 10:52:48  9  ERR                    Task configdb has failed with an unknown exception
    12/07/2009 10:52:48  9  ERR                    Exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
       at System.ThrowHelper.ThrowKeyNotFoundException()
       at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
       at Microsoft.SharePoint.Utilities.SPUtility.GetUserPropertyFromAD(SPWebApplication webApplicaiton, String loginName, String propertyName)
       at Microsoft.SharePoint.Administration.SPManagedAccount.GetUserAccountControl(String username)
       at Microsoft.SharePoint.Administration.SPManagedAccount.Update()
       at Microsoft.SharePoint.Administration.SPProcessIdentity.Update()
       at Microsoft.SharePoint.Administration.SPApplicationPool.Update()
       at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, SPProcessAccount processAccount, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
       at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, IdentityType identityType, String applicationPoolUsername, SecureString applicationPoolPassword, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
       at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, String farmUser, SecureString farmPassword)
       at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
       at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
       at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
       at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
       at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
    Any suggestions?
    Thanks
    Christoph

  • SMD Agent Configuration Wizard for CI and DB host

    Hi, I have to config the CI host in /smd > managed systems > setup wizard. But what is with my agends from other hosts then CI like DB host? Do I have to do somthing else with the Agents from this hosts? At the moment this agens have the status <no server name>  in smd/go/ADMIN_AGENT

    Hello,
    After you connect the agents to the Solution Manager they will appear as No Server Name in Agent Administration.
    Run the setup wizard for the managed system, select the agent before processing further. This will assign the agent to a server name.
    Best regards,
    Guilherme

  • Import error while running configuration wizard for ESR setup

    Hi, I am trying for this for last two days. but not able solve this.
    I am getting the error at the final stage of the configuration
    Error message is below
    Importing XI content
    Description
    Exception in step "INVOKEIMPRTCNTNT"
    Exception details : com.sap.aii.util.misc.api.ResourceException: Connection to system Integration Builder using application CMS-Transport lost. Detailed information: Error accessing "http://INLD50046921A:50000/rep/cmstransport/int?" with user "ESRCMSCE1". Response code is 500, response message is "Internal Server Error"
    I tried two or three times I got the same error then i canceled.
    Now I am not able to start the configuration process gain.
    Any body who has completed the configuration process please help me in this.
    Regards
    Satya

    Hi,
    I think the problem can be solved by downloading from the marketplace and importing the content manually.
    Here is a description of the process:
    http://help.sap.com/saphelp_nwesrce/helpdata/en/44/5755451622311ee10000000a155369/content.htm
    The exception was because we didnt have the needed files (correct me if I am wrong) (The import can be done before or after running the configuration wizard)
    Best regards,
    V S

  • Configuration Variant for WebDynpro Component

    Hello,
    I would like to create a configuration variant for a web dynpro component and load this configuration
    with create_component-method (Parameter configuration_id).
    Help for following topic would be very helpfull:
    - Can i create configuration variant with component configurator as customization or must i create a configuration variant with method SAVE_NEW_VARIANT of IF_WD_PERSONALIZATION as personalization?
    - Is data from basis configuration (variant feld is empty) and from variant configuration (for basis configuration) is merged?
    thanks
    Regards
    Paul

    SAP Documentation:
    http://help.sap.com/saphelp_nw70/helpdata/en/fd/2da442dc030e31e10000000a1550b0/content.htm
    All the adjustments made by the administrator in the admin mode are stored as client-specific. Presently no option is available for structuring smaller user groups on an administrative basis. Since cross-client adjustment takes effect for the respective configuration variant, structuring of smaller groups can be implemented currently through the maintenance of different configuration variants
    I do not know how can i create such  configuration variants.

  • How to select a Hibenrate configuration file for web application/junit?

    Dear all,
    I am using hibernate for a web application.
    I have two configuration files: one ("hibernate-jta.cfg.xml") uses a data source and the other ("hibernate.cfg.xml") directly uses jdbc.
    private static String CONFIG_FILE = "hibernate-jta.cfg.xml"; private static String CONFIG_FILE_WITHOUT_DATASOURCE = "hibernate.cfg.xml";
    When I deplyed my applcation to an application server, I need to use the first one. When I run junit test, I need to use the second one.
    How can I design a mecanism to switch between the two configuration files according the the case: web application or java stand alone application?
    Configuration cfg = new Configuration(); cfg.configure(CONFIG_FILE);
    Thanks.
    Pengyou

    My solution is to add a new public method "initFactoryForJunit() " in the Static singleton.
    In the junit test, this method will be invoked in order to load a second configuration file.
    public class ThreadsafeSessionFactory {
         private static Logger log = Logger
                   .getLogger(ThreadsafeSessionFactory.class);
         private static String CONFIG_FILE = "hibernate-jta.cfg.xml";
         private static String CONFIG_FILE_FOR_JUNIT = "hibernate.cfg.xml";
         private static final Configuration cfg = new Configuration();
         private static org.hibernate.SessionFactory sessionFactory;
         public static SessionFactory getInstance() {
              log.info("getInstance()");
              if (sessionFactory == null) {
                   ThreadsafeSessionFactory.initFactory();
              return sessionFactory;
         /*public synchronized Session openSession() {
              log.debug("openSession()");
              return sessionFactory.getCurrentSession();
         public synchronized Session getCurrentSession() {
              log.debug("getCurrentSession()");
              return sessionFactory.getCurrentSession();
         private static void initFactory() {
              log.debug("initFactory()");
              if (sessionFactory == null) {
                   try {
                        Configuration cfg = new Configuration();
                        cfg.configure(CONFIG_FILE);
                        String factoryJndiName = cfg
                                  .getProperty(Environment.SESSION_FACTORY_NAME);
                        if (factoryJndiName != null) {
                             log.debug("using jndi factory");
                             cfg.buildSessionFactory();
                             sessionFactory = (SessionFactory) (new InitialContext())
                                       .lookup(factoryJndiName);
                        } else {
                             log.info("using default factory");
                             sessionFactory = cfg.buildSessionFactory();
                             log.info("after using default factory");
                   } catch (Exception ex) {
                        ex.printStackTrace();
                        log.error("failed creating session factory");
                        throw new HibernateException(
                                  "initFactory(): failed initializing configuration");
         public static void initFactoryForJunit() {
              log.debug("initFactory()");
              if (sessionFactory == null) {
                   try {
                        Configuration cfg = new Configuration();
                        cfg.configure(CONFIG_FILE_FOR_JUNIT);
                        String factoryJndiName = cfg
                                  .getProperty(Environment.SESSION_FACTORY_NAME);
                        if (factoryJndiName != null) {
                             log.debug("using jndi factory");
                             cfg.buildSessionFactory();
                             sessionFactory = (SessionFactory) (new InitialContext())
                                       .lookup(factoryJndiName);
                        } else {
                             log.info("using default factory");
                             sessionFactory = cfg.buildSessionFactory();
                             log.info("after using default factory");
                   } catch (Exception ex) {
                        ex.printStackTrace();
                        log.error("failed creating session factory");
                        throw new HibernateException(
                                  "initFactory(): failed initializing configuration");
         public static void close() {
              if (sessionFactory != null)
                   sessionFactory.close();
              sessionFactory = null;
    }

  • Anybody know what make is in the Apple Store configured SSD for new MacPro?

    Hey there,
    Does anybody know what make and model Apple is putting into their new Mac Pros?
    At Apple Canada it is a 512GB SSD that costs an extra $1340 to add to your custom build.
    I really like what I've read about the OWC SSD below:
    http://eshop.macsales.com/shop/internalstorage/Mercury_Extreme_SSD_Sandforce/Solid_StatePro
    My question is the quality vs. price arguement:
    Apple config = 512GB $1340 CDN (?? make and model of this SSD ??)
    OWC config = 480GB $1599 USD

    They are not really good SSD drives.. they are SAMSUNG and are very much so, inferior compared to the OWC SSD drives.. do yourself a favor - don't waste your money on stuff that won't work right.. Get the OWC + save $$$

  • Configuration management for Software Component

    Hi
    I have 3 XI system (dev, test, production) and CMS.
    For example I have exported the whole component and 2 changlelist into test and production through CMS i.e. production has version MyComponent + changelist1 changes+ changelist2 changes)
    Now I want to rollback changelist2 changes on production. I want to have version MyComponent + changelist1
    How can I do that?

    OK.
    But if changelist1 contains MyMapping (version1), MyBPM (version1)  and chanhelist2 MyMapping (version2) MyBPM (version2).
    I want to have MyMapping (version1), MyBPM (version1).
    It is not possible to export specific version of objects and as far I know IB will not replace new version on old version.
    How can I do this simple and standatd task for version management system like CVS, Subversion, DTR in XI?

  • How to retrieve configuration list for WebDynpro component

    Hi experts,
    I have webdynpro component A with configuration AA.
    How to retrieve configurtion AA ? Is there any interface or Function module I can use?
    Also another question is how to get webdynpro configuration of WebDynpro application.
    Thanks.
    best regards,
    Vincent

    Hi Abhi,
    Yes , this is possible.
    But I want to get configuration dynamically.
    Input parameter : WebDynpro compoenent name
    Output Parameter: List of WebDynpro Configuration
    Is this possible?
    Vincent

  • Where should i store application configurations?

    Hello all,
    i have a little problem. I read a lot of posts in this forum with the same problem, but no anser was satisfiable for me. Where should i store application configurations? For example, where can i store error descriptions (text) for errors with a special id. There is no way to do it in the webconatiner, because the ejb's should log their errors. File I/O operations are forbidden by the specification, so the use of ResourceBundles with propertie files should be forbidden, too, isn't it? Is there another way than storing the error description in a database?
    I hope you can unstand my question and someone have a solution for my problem.
    thanks & regards
    Ren� G.

    You can use an entity bean with your configuration.

  • Very first step in configuring RMAN for a Backup

    DB version:10gR2
    I am a DBA supporting applications development and i am not familiar with RMAN. This weekend we are going to Patch 10.2.0.1.0 to 10.2.0.3.0. Before that i am going to take a backup of the entire Database containing around 57 schemas(total of around 600gb).
    We don't have Tape drives. I am going to backup this up on three filesystems in the same machine. This instance is not running on ASM. What is the first step i should be doing in configuring RMAN for a backup?
    Edited by: user10583227 on Jan 27, 2009 4:50 AM

    Be careful, three filesystems doesn't necessarily mean the use of three channels. Could be more...could be less.
    Are you in a position to shutdown the database? If not, you'll also want to backup the archivelogs with BACKUP DATABASE PLUS ARCHIVELOG. You may also consider creating a Guaranteed Restore Point which would allow you to rollback your database in minutes if the upgrade fails.

  • Siebel Gateway Name Server Configuration Wizard returns "Execution failed"

    Hi,
    I am installing Siebel 8.1.1.1 on Linux platform and now having problem while trying to configure Siebel Gateway Name Server.
    Steps done:
    1) DB instance prepared
    2) Created Siebel installation image
    3) Installed Siebel server and configured Gateway name server (the wizard started automatically as part of the installation). Skip configuration of Enterprise and SWSE Logical profile
    4) Ran DB Configuration Wizard for the primary language - successfully. Import repository-add language - successfully.
    5) Trying to Wizard "Configure Enterprise" - failed with "Execution failed"
    Here I thought that probably Gateway Nameserver was not configured and decided to remove the Gateway and create it from scratch.
    Unfortunately this time the Gateway configuration failed. Also with message"Execution failed"
    Here are the errors I got in the log files sw_cfg_util*.log
    <EF><BB><BF>2021 2012-01-25 16:14:56 2012-01-25 16:14:56 +0200 00000002 001 003f 0001 09 sw_cfg_util 17234 -1215752512 /OraSSO_tstcol/siebapp/server/siebsrvr/log/sw_cfg_util.log 8.1.1 [21111] ENU
    GenericLog GenericError 1 000000024f204352:0 2012-01-25 16:14:56 (svrconfig.cpp (2465) err=3023557 sys=0) SBL-CSO-08901: The required arguments are not specified.
    GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:56 Executing step: CreateGateway
    GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Step CreateGateway: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%srvrcfg with cmdline -u nouser -p nopassword -r %%SiebelRoot%% -g %%SiebelRoot%%%%OSDirSeparator%%sys%%OSDirSeparator%%siebns.dat::NSFILE: -r %%SiebelRoot%% -a gateway -l %%PrimaryLanguage%% -i %%SiebelRoot%%%%OSDirSeparator%%admin%%OSDirSeparator%%gtwydefs.dat
    GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Failed during Execution, err: 5500044
    Does anybody know what is the reason?
    Searching in Metalink and Google were fruitless..
    Thank you in advance.

    Just in case anybody bumps in this thread:
    The problem in my case was solved according with Oracle Note "Delete and create the "Siebel Server" via Configuration Wizard on Linux, it failed. [ID 880562.1]"
    Applies to:
    +Siebel CRM - Version: 8.1.1 SIA [21111] and later   [Release: V8 and later ]+
    Linux x86
    Symptoms
    Delete the "Siebel Server" once and then create a new "Siebel Server" via Siebel Server Configuration Wizard on Linux, it failed with message "Execution Failed".
    The error on sw_cfg_util_xx.log is as follows,
    GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:33 Executing step: AddSrvrRegistryEntry
    GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Step AddSrvrRegistryEntry: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl with cmdline -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%%
    GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Failed during Execution, err: 5500044
    Reproduce steps:
    - confirm that siebel server was created before, and is stopping.
    - create sh env and enter the following command to remove the Siebel Server.
    +$ cd $(SiebelServerRoot)+
    +$ . ./cfgenv.sh+
    +$ cd $(SiebelServerRoot)/bin+
    +$ ./ssincfgw+
    - select "3 - Remove Existing Configuration".
    - complete the configuration wizard.
    - enter the following command to create the Siebel Server.
    +$ cd $(SiebelServerRoot)+
    +$ . ./cfgenv.sh+
    +$ cd $(SiebelServerRoot)/bin+
    +$ ./ssincfgw+
    - select "1 - Create New Configuration".
    - continue inputs to finish and execute the configration.
    +==> you'll find "Execution Failed".+
    Cause
    AddSrvrRegistryEntry section shown in the log is the command for registering the Windows Service, and it is no need to execute on Linux env. However, it is executed and it failied.
    Solution
    You can do either of follows,
    +(1) Uninstall and Install the Siebel Server again.+
    +(2) The section to execute the Windows registeration command is specified on $(SiebelServerRoot)/admin/common.scm, line 2475-2477.+
    +[Step]+
    Name = AddSrvrRegistryEntry
    Type = RunProg %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl ' -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%% '
    So, delete the AddSrvrRegistryEntry section from common.scm, and execute Configuration Wizard again.
    Edited by: mmango on Jan 31, 2012 12:21 AM

Maybe you are looking for