What TCP ports are used in Dataguard

Hi Team,
what TCP ports are used in Dataguard, Dblink or SQL statement
Thanks
Aj

hello,
i am a Jr. DBA, but from what i can think its the same port as the listner would. 1521 or it would be the same at ur entry in TNS entry in tnsnames.ora

Similar Messages

  • What TCP ports are used by Push notifications

    I believe my Firewall is blocking Push Notifications on my iPod touch. So, I wanted to discover what the TCP Ports are that are used by Push so I could open those ports to pass packets (info) to my iPod.

    See:
    http://support.apple.com/kb/HT3576
    "If you are still unable to receive notifications and you are using a Wi-Fi connection, verify that the network or firewall is not blocking access to port 5223."

  • How do i find out what tcp ports are open? and where do i look it up?

    how do i find out what tcp ports are open? and where would i go to see them? i have a program that is asking for it and i am unable to find where those are listed.

    If you are not too tech savvy, try using the Network Utility found in the Utilities folder. Just have the Mac scan itself.
    If tech savvy, there's always Fyodor's classic NMap, found at www.insecure.org.

  • What defaults Ports are used by UCM?

    Hi All,
    Could anyone please let me know what all ports are used by UCM and their purpose. Appreciate you help on this. Thank you
    Thanks & Regards,
    Ashok

    UCM:16200, IBR:16250, IPM:16000
    You should be able your ports easily if your run the WLS console (server:7001/console), search under Environment - Servers
    What's their purpose?
    Each application is a separate J2EE application deployed on an app server, listening on a different port. UCM is the content repository, IBR is a conversion server, IPM is a module designed for imaging

  • What IP Ports are used for continuity?

    In my company WLAN the IP Adresses are seperated. With IP/UDP Ports are used to communicate within the continuity functions?
    Thanks

    Great, actually, I found this information, and would like to re state my question. Now that I know what ports I should be using (this is described in detail in the hardware manual for the E series), I would like to see some definite information about what I must do in my external device to make use of these signals.
    I'm a little confused by some comments in the documentation that some of the facilities of Port C (on the 8255) are only avialable if I use register level commands (as if using the parallel port). If I use the DIG_Prt_Config and set to handshaking (input) on a port, then I assume I set up my external hardware as if Port C was in Mode 1(input), and then follow the timing described in the E Series manual.
    It's just a shame that everything o
    n the PC side is well described, but there are no application notes that I can find about building an external device that can use the handshaking signals.
    If 'you' (anyone) can confirm what my assumptions, or point me in the right direction, I would appreciate it greatly.
    Thank you.
    Joshua

  • What Ports are used by Wake on Lan?

    Anybody know what UDP ports are used by ZFD's remote wakeup services?
    We need to enable directed broadcasts on our network to get WOL to work
    across our routers. However, directed broadcasts are quite popular with
    denial-of-service attackers, so we'd like to limit them to certain UDP
    ports.
    I believe that different WOL software products use different UDP ports
    for their Magic Packets. But I can't find Novell's in any of the
    documentation...
    Thanks!

    you could use something like Ethereal to check, but AFAICR it's 1765
    Shaun Pond

  • HT204406 What ports are used by iTunes Match?

    What ports are used by itunes Match? I need to change my router settings.

    Good question. The standard document is still mentioning MobileMe, rather than iCloud.
    TCP 5223 looks significant ... but the a close check through the rest of the following document might also be prudent:
    Well known TCP and UDP ports used by Apple software products

  • What incoming public TCP ports are blocked?

    I just setup my 890L to forward incoming public TCP ports to to a couple of my LAN devices.  Unfortunately, it looks like VZB is purposefully blocking common incoming TCP ports. 
    I tried searching on google.com for what ports are blocked; but, just found a bunch of posts like this one.  Some people actually tried contacting 1st and 2nd tied VZB tech support about this; but, it's clear they don't have this information available to them.
    Has anyone verified what incoming public TCP ports are not blocked?  There's no easy way for me to test this using my 890L.

    You can find out for yourself which ports are being blocked by using a Port Query utility.  Depending on the OS of your computer there should be multiple utilties available for free floating around.
    As we have seen numerous times before, devices on VZW's new SIM card/4G LTE network are blocked from many of the public facing services and features we have previously been dependant on.  Public IP Addresses, Public Ports, Webcams, VOIP phones, etc. all suffer under the same umbrella of limitations on the new network.  The list is too long to publish everything that is blocked or not working as it previously did.  Much easier for you to post the requirements of your application and have us confirm if its working or not.
    If you have not already experimented with VPN's I'd suggest checking them out.  VPN's are one of the easiest ways around these new limitations.  With a VPN enabled your device will tunnel all of its communications out an allowed port to a VPN server where your traffic is free to act normally before returning to you.

  • RFC: What Ports are used

    We are trying to establishing a connection from ECC6.0 to a cFolders System. The Systems are in different LANs but are able to reach each other. For security reasons we have to open ports that are used by RFC. Can anyone tell me what ports are used by RFC?
    Thanks!

    hi
    you need to use FILE Port.
    Regards,
    Hakim

  • What Thunderbolt ports to use?

    I know there is some protocol on what Thunderbolt ports to use on the new Mac Pro. I have 2 external TB drives, 1 TB display, and I feed an AJA T-Tap with another TB cable. The other day I changed some cables around and when I went to start the Mac Pro it just gave me chimes and would not boot. I moved some TB cables and all is fine. What is the proper method?
    Thanks.
    Tom

    See if this helps:
    http://support.apple.com/kb/ht5918
    Note in the diagram that there are three seperate bus points.
    Al

  • How to identify Which ports are using in RAC setup?

    Hi,
    how to identify Which ports are using in RAC setup?
    Thnaks,

    [Viewing Port Numbers and Access URLS|http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/ports.htm#sthref1208]

  • HT4759 what hardware is/are used in order for the Apple: iCloud to run?

    what hardware is/are used in order for the Apple: iCloud to run?

    Apple - iCloud - Learn how to set up iCloud on all your devices.
    More Info Here  >  http://www.apple.com/support/icloud/

  • What exact metals are used in the iPod 5 and what for?

    what exact metals are used in the iPod 5 and what for?

    Hey Connor and Josh, The same kind of metals that are found in pretty much all electrics. Aluminum, Gold, Copper, Solder, (I would guess lead free). You will also find plastics and resins, glass and Li-ion, carbon, and silicon. Why do you ask? If your thinking of stripping one down for the metals, it's not worth it, there so little in there it will cost you more to separate the metals than there value by weight.  Cheers.

  • Which ports are used by LMS 4.2.5 Software Center

    Hi everybody!
    we are trying to download device updates and packages via the software center of lms 4.2.5. but get the attached error msg.
    Which ports are used for the download (for firewall configuration)
    I can't find the used ports for this function in the install guide.....
    I am very thankful for any suggestions!
    Edit:
    here is the log output:
    [ Sun Jan 04 00:30:01 CET 2015 ] ERROR  [CcoDownloadAdapter : getXmlFileList]  : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
    [ Sun Jan 04 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyHost]  : No proxy Host configured
    [ Sun Jan 04 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyPort]  : No proxy port confgured
    [ Sun Jan 04 00:30:01 CET 2015 ] ERROR  [CcoDownloadAdapter : getXmlFileList]  : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
    [ Mon Jan 05 00:30:01 CET 2015 ] ERROR  [CcoDownloadAdapter : getXmlFileList]  : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
    [ Mon Jan 05 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyHost]  : No proxy Host configured
    [ Mon Jan 05 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyPort]  : No proxy port confgured
    [ Mon Jan 05 00:30:01 CET 2015 ] ERROR  [CcoDownloadAdapter : getXmlFileList]  : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
    there is no proxy in use, so the is none configured :)

    Hi,
    Looks like you are encountering this BUG
    CSCur85172    Unable to installing the device packages from cisco.com using LMS Server
    Try this to resolve the issue::
    Stop Daemon Manager
    2.            Change the protocol 'http' to 'https' for the below URL's in vds.properties
    file located under /NMSROOT/lib/classpath/com/cisco/nm/xms/vds/.
    NGCcoScript=http://tools.cisco.com/software/catalog/swcs/softwaremetadata
    NGCcoImageScript=http://tools.cisco.com/software/catalog/swcs/image
    TO
    NGCcoScript=https://tools.cisco.com/software/catalog/swcs/softwaremetadata
    NGCcoImageScript=https://tools.cisco.com/software/catalog/swcs/image
    3.            Start the Daemon Manager.
    Thanks-
    Afroz
    ****Ratings Encourages Contributors ****

  • Which ports are used by oracle datbase and management agent other than 1521

    Hi,
    Which ports are used by oracle datbase and management agent other than 1521 and the default port of management agent?
    Regards,
    Rjiv.

    Check Port Numbers and Protocols of Oracle Components and also check your portlist.ini in $ORACLE_HOME/install directory.

Maybe you are looking for

  • I GIVE UP!  Is it possible to uninstall Leopard and go back to Tiger?

    I am ready to give up for now. Is it possible to uninstall and go back to Tiger?

  • Assigning long text values to ODI variable

    Hi all, I want to store the error message of the previous step in a variable: _<%=odiRef.getPrevStepLog("MESSAGE")%>_ (using ODI 10.1.3.5 on Oracle 9i). If I refresh the variable using a statement like Select '<%=odiRef.getPrevStepLog("MESSAGE")%>' F

  • Layout problem with div. on PC but ok on iPad how to fix?

    hello. like the title says, im having a problem here. i im builiding my own website and am creating a page with all my personal exp. and so on. to keep it nice i created serveral div tags. here is my site: http://www.eduweb.hhs.nl/~10071717/home.htm

  • How can I prevent submitters from submitting twice?

    I use forms for balloting committee members.  If the balloting period is lengthy, they can forget they submitted and try to submit the responses again. Apparently, Adobe Forms permits this to happen.  Is there a way to prevent submitters from refilli

  • HT204053 icloud/apple id mess

    hi i had an apple id for years and (silly me, why fix what is not broken???) i opened an icloud email acc couple of weeks ago. now my contacts are on my iphone but not on ipad nor pc nor mac and, when i log in with my old apple id it shows the new ic