What TCP/UDP ports are required for Sunray to communicate withSunray server

Hi,
Our Sunray appliances and Sunray servers are setting in two different VLANs. For there is no ACL applied between both the VLANs, but we are plannin g to place ACL between these two VLAN for security reason. Do any have a list of ports require for Sunrays to communicate with the Sunray server.
Thanks for the Help
Moe Hans
Network Administrator
Kwantlen Polytechnic University
Surrey, BC
[email protected]

[http://wikis.sun.com/display/SRSS4dot2/Ports+and+Protocols]

Similar Messages

  • What tcp/udp ports are required to access the app store via a firewall?

    we have ports 80/443 open but users are still unable to connect.

    You should be ok - but read this. Try opening 2195 and 2196.  If you still have issues
    port watch and see what an iPad does when trying to get to the store.
    http://support.apple.com/kb/TS1629

  • What TCP/UDP ports need to be open for VPN Client version 4.8?

    What TCP/UDP ports need to be open for Cisco VPN Client version 4.8 to work?
    Thanks,

    Normally, you need the following ports and protocol :
    UDP 500
    UDP 4500
    ESP
    In case, you are using IPSec over TCP you have to open, TCP port 10000 or any other port you want to use for IPSec connections (Its configurable).
    -Kanishka

  • TCP/UDP Port Utilization question for CCX 8.5

    Greetings,
    I have gone through the CCX 8.5 TCP/UDP port utilization guide.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/configuration/guide/uccx851pug.pdf
    I always do this as a matter of practice and I had a question concerning Java RMI ports. In the guide there is an ephemeral range TCP:32768-61000 that is used for Java RMI. Based on the context clues in the footnote this is an intra-cluster communication between processes running on CCX. This jives with ACLs I have built for previous versions.
    The hang up I have is that Table 1 (page 6) of the guide shows that one of the remote devices is "Editor". I take this to mean CRS Editor, which can run on a desktop in the environment. I want to keep the ACL as trim as possible, so I don't want to open up the TCP ephemeral range unnecessarily. So, I guess my question is:
    When that document refers to "Editor" do they mean that the CRS Editor is communicating using the referenced ports? Or is there a server-side process called Editor listening on those ports. The shift in how I apparently have to account for RMI is causing me to question.
    Thanks in advance,
    Bill

    I followed the port guide, but am still having issues connecting to the editor from my workstation with my access-list in place.
    When I remove the ACL the editor connects and I can do reactive debugging. The ACL breaks this.
    Followed this
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_9_02/configuration/guide/UCCX_BK_P89325D5_00_port-utilization-guide-uccx-902.pdf
    Does anyone have a sample acl that works?

  • What Win 7 drivers are required for Satellite L750

    Excuse me...
    I'm a new Toshiba L750 owner. I can see this (huge) drivers' list, but here there ara ALL TOSHIBA's utilities aswell.
    I believe, the fellow asked (as I am), which are the NECCESSARY drivers for a good/working new W7x64 instalation. Personally, I don't want ANY of the Toshiba's utilities. All I want is a "fresh" W7x64 instalation and my laptop running fine. That's all...
    So, I don't think we need no more than 10-14 drivers, to set-up fine our laptops.
    So, WHICH drivers are needed?

    Fellas, listen to me...
    When I bought the L750-1LU last Monday, I almost was one step before... throw it out of my window!
    The battery didn't last more than... 1 hr - just fooling around the system/utilities and surfing on the Net, nothing extreme - and my boot time was OVER... 30-40 sec (without installing ANYTHING! I had only the official MSW7 and Toshiba's applications)...
    Before... throw it out of my window, I chose to collect all the neccessary drivers from the Net and FORMAT the damn thing, re-install a "fresh" MSW7 and "play" with the power settings...
    I did it... the laptop now runs like a charm for OVER 3 hrs, the boot time is about... 10 sec and I don't remember when I needed any Toshiba application and I don't have it installed any more!
    I don't need an ECO app, I don't want any "Face ID recognize", or any pop-up message from the MILLIONS I had in few minutes, before I formated the laptop.
    The following drivers, are those I chose to install. Please, reply me if I'm good:
    * Atheros LAN-ETHERNET Driver v1.0.0.46_W7x64_TC70095400D
    * Atheros Wireless LAN Driver v9.2.0.206.0.s3264_W7x65_wCAT_TC00346200E
    * Conexant Audio Driver v8.51.1.0a_W7x64_TC70107500F
    * Intel Chipset Installation Utility v9.2.0.1015_W7x64_TC70095800D
    * Intel Display Driver v8.15.10.2291_W7x64_TC70097300J
    * Intel Proset Utility v14.0.2.0.1_W7x64_TC00370400B
    * Intel PROSet Wireless WiMAX Software v2.3.0.64_W7x64_TC00244800E
    * Intel Wireless LAN Driver v14.0.2.2.1.s64_W7x64_wCAT_TC00370300B
    * nVIDIA Display Driver v8.17.12.6669_Wx64_TC70096200U
    * nVIDIA HD Audio Driver v1.1.13.1_W7x64_TC70096300C
    * Realtek Card Reader v1.0.0.12_W7x64_TC70098500J
    * Realtek Wireless LAN Driver v2.00.0013_W7x64_TC70102800C
    * Synaptics Touchpad Drivers v15.2.11.1_W7x64_TC70097100F
    * TOSHIBA Bluetooth Stack_W7x64_TC00354000J (the system saying is fine, but I notised a "yellow triangle" in "My computer" Devices list. I'm keep trying to update or fix but all messages saying "it's fine")
    * TOSHIBA Realtek Card Reader v.1.0.0.12_W7x64_TC70098500J
    * TOSHIBA Web Camera v1.1.6.3_W7x64_TC30271000C
    * USB3.0 Driver v2.0.32.0_W7x64_TC70102900D
    So far, I think the laptop "rocks"... All I need from you is to tell me, if I need any other drivers and if I'll be fine with the 3D GRAPHICS & DOBLY ADVANCED TECHNOLOGY of the laptop (if not, which apps I need to install too)?
    Thxs.

  • TCP/UDP Ports and site used by FEP to download updates - needed to allow on perimeter firewall

    Can some one point me with information like what TCP/UDP ports are utilized by FEP and what DNS / site Name it uses to download FEP Updates. This is needed to tighten perimeter FireWall policies
    Thank you

    It should be the same as the documentation for all Software Updates:
    https://technet.microsoft.com/en-us/library/bcf8ed65-3bea-4bec-8bc5-22d9e54f5a6d#BKMK_ConfigureFirewalls
    Make sure to expand the "restrict access to specific domains" section to see the update related URLs.

  • Which ports are required by ODMA?

    I am an SAP R/3 administrator.
    I want to upgrade from Oracle 8.0.6.3 to 8.1.7.3 under AIX 4.3.3
    So I need to use the RUNINSTALLER followed by the ODMA
    I want to do this remotely, passing out through one firewall then in through another.
    My X-emulation is ReflectionX, for which I already have firewall transparency for port 6000 .
    My question: Which ports are required for RUNINSTALLER + ODMA
    Thanks in advance,
    Keith

    Hi Keith!
    This forum deals with issues specifically related to the Oracle Migration Workbench product. This product is used to migrate non Oracle databases to Oracle8i & Orace9i. (It does not enable you to migrate from one Oracle database version to another!)
    In order to get assistance in performing a migration frrm one Oracle database version to another you should contact Oracle RDBMS Support. You should be able to find their contact details in the Documentation that comes with ODMA.
    hope this helps
    - Garry

  • What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

    Hi All,
    What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
    Client Type
    Port range  and Protocol required for Audio
    Port range and Protocol required for
    Video
    Port range and Protocol required for
    A/Vconferencing
    Windows Desktop   Client
    Windows mobile App
    Iphone
    Ipad
    Andriod phone
    Andriod Tablet
    MAC desktop client
    Please advise. Many Thanks.

    Out of the box, 1024-65535 for all of the client ports.  :) 
    https://technet.microsoft.com/en-us/library/gg398833.aspx
    You'll want to tune your client ports a bit
    https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings.  I'm not sure the mobile clients respect that setting.
    Elan's got the best writeup for Windows clients here:
    http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
    However, the marking of the packets is the tricky part.  Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings.  You have to do it based on ports
    as the traffic could be peer to peer.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • What ports are required to be open on a firewall for UCCX ver7 Backups

    I'm trying to setup a backup location on UCCX version 7.
    The backup storage location and the UCCX server are seperated by a firewall.
    What ports are required to be opened on the firewall to allow the backups through to the backup location.
    Can't find any info online

    Try it locally on the server itself.
    You just need to create a shared directory backup oon the server on C:\ drive.
    \\127.0.0.1\C$\backup
    This should work.
    Link to port utilization guide:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/configuration/guide/uccx70prtuti.pdf
    Regards,
    Chuck
    Please rate helpful posts and identify correct answers.

  • What IP Ports are used for continuity?

    In my company WLAN the IP Adresses are seperated. With IP/UDP Ports are used to communicate within the continuity functions?
    Thanks

    Great, actually, I found this information, and would like to re state my question. Now that I know what ports I should be using (this is described in detail in the hardware manual for the E series), I would like to see some definite information about what I must do in my external device to make use of these signals.
    I'm a little confused by some comments in the documentation that some of the facilities of Port C (on the 8255) are only avialable if I use register level commands (as if using the parallel port). If I use the DIG_Prt_Config and set to handshaking (input) on a port, then I assume I set up my external hardware as if Port C was in Mode 1(input), and then follow the timing described in the E Series manual.
    It's just a shame that everything o
    n the PC side is well described, but there are no application notes that I can find about building an external device that can use the handshaking signals.
    If 'you' (anyone) can confirm what my assumptions, or point me in the right direction, I would appreciate it greatly.
    Thank you.
    Joshua

  • Which TCP/UDP ports need to be opened on a firewall for adobe reader and flashplayer?

    Which TCP/UDP ports need to be opened on a firewall for adobe reader and flashplaer to operate properly? This would include updating, linking, and any subset of features.

    The Acrobat Family uses TCP HTTP/HTTPS for all traffic. The following processes and ports may be active on a Windows client machine:
    AdobeARM.exe - automatic updates - port 443
    AcroRd32.exe - brand messages - port 443
    AcroRd32.exe - links in documents - anything specified in the URL
    Acrobat.exe - brand messages - port 443
    Acrobat.exe - links in documents - anything specified in the URL
    AdobeCollabSync.exe - Tracker review data - port 443
    The same ports are used by the  program components on OS X.
    There are no inbound listening ports for any elements of the Acrobat Family. Automatic updates are not pushed and there are no server processes within the software.

  • What settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE

    hai friends
    what settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE
    Thanks a lot
    Regards
    VinayKrishna

    Hi Vinay,
    1. For DP_PROC_TY  you need to give the transaction type or R/3 document type you want to use for creating direct material POs. Could be ECDP given in the standard or copy of which you might  have created.
    2. For CT_PROC_TY it is either PCTR or GCTR depending what you want to create local contract or GOA.
    3. TEND_TYPE can have BID, RFCR etc depending on what type of bid invitaion you want to create form sourcing cockpit or as follow on bid invitaion.
    Ragards,
    RRK.
    Do reward points for useful answers
    Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM
    Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM

  • What are the essential services that are required for ensuring server is healthy up ?

    Hi All,
    Please advise me What are the essential services that are required for ensuring server is healthy up ?
    Warm regards,
    jk1510

    The easiest way to find the Health report of server or workstation follow the below steps which is very much easiest way to get it done
    There are a few ways to find this in Windows Server 2008.
    First click “Start” and type “Generate a system health report”
    Or second navigate your way to the Control Panel choose “System and Security” and choose “Generate a system health report”.
    The last is to type “Generate a system health report” into the “Search Control Panel” box in the upper right hand corner of the Control Panel window.
    Once armed with this data it’s easier to refute or acknowledge an issue is at hand.
    BTW if you’re looking for this same thing in Windows 7 it’s there just buried a bit more.
    Search Performance in the Start Menu, choose “Performance Information and Tools”, click “Advanced Tools” from the menu on the left, and finally choose “Generate a system
    health report”.
    Ref: http://blogs.technet.com/b/rmontee/archive/2012/02/23/generate-a-system-health-report.aspx
    Exchange Queries

  • What SAP modules are required for insuance sector

    what SAP modules are required for insuance sector

    Hi,
    Following authorizations are required to be able to use all the functions of Support Package Manager:
    S_CTS_ADMI
    S_TRANSPRT
    Additional objects required and which can be used to restrict further the functionality are:
    S_C_FUNCT
    S_CTS_ADMI
    S_DATASET
    S_GUI
    S_RFC
    As available in the SAP help,standard SAP S_A.SYSTEM contains all necessary access for importing support packages.
    Regards,
    Nagendran

  • What changes are required for OSS note 456507

    Hi All,
    PLease advise me what changes are required for OSS note 456507 (Assign the function groups QOWK or ORFC in the authorization object S_RFC to tRFC/qRFC users).
    I’m thinking of just going with the following additions to Role
    AAAB – Cross Application Auth Objects
    S_RFC
    Activity – 16
    Name of RFC - *
    Type of RFC - *
    But wanted to check what the implications of doing such a thing were, are there any negative points that you can think of opening up the access as above, as opposed to what was suggested in the OSS note?
    Your advice would be greatly appreciated.
    Thanks in Advance.
    Regards,
    Sandhya.

    Hello Sandhya,
    S_RFC is needed in case of making any RFC calls.
    Normally it is needed  for users that are mentioned in RFC destinations.
    As such mostly these users are system/communication users or super users.
    Without giving access to function groups through S_RFC successful RFC call can´not be done.
    Now the value of field name of RFC can be * but only for those users which are really global super users. In case you need this authorization for any selective functionality as in you case only for function groups QOWK or ORFC then you should try to  restrict the access. Negatiity is only that in case of * the authorization access increases but for system or super users you dont need to worry too much really because with system/communication users no one can login and the super users will have sap_all generally. Also their passwords will be a well kept secret so that a miususe can not be made.
    By global super users I mean users which are used for various types of activites.
    Please award points accordingly.
    Regards.
    Ruchit.

Maybe you are looking for

  • I bought a song today and ALL of my music disappeared... How do i get it back? Does icloud restore it?

    I bought a soong today from itunes. While the song was downloading, my phone blinked off. Came back on and finished downloading the song. Problem is now ALL of my other music is gone. Anyone know how to get it back? Does it correct itself after it ba

  • File deployment error

    Hi As we are deploying a CRE application, the application is deployed successfully but it throws some warning. There are two application on one of the servers. I guess this might be because of the application on same server causing intervention betwe

  • WiFi looses connection when idling

    Hi, I've updated to Mavericks and since then I've following issue. If my network connection idles for a certain amount of time, Mavericks decides to drop the connection. The WiFi smybol gets greyed out and I have to maually reconnect to my network. F

  • Installing WLS6.1SP3

    While installing wls61sp3_upgrade_generic.zip into an installation ow WLS 6.1 SP1, I get an error that "WebLogic Server 6.1 not found" and the text "WebLogic Server Service Pack 3 Installation failed. You do not seem to have WebLogic Server 6.1 insta

  • Wifi Keeps Disconnecting Without Actually Disconnecting

    Every once in a while on my new MacBook Air, when im on the internet, it works just fine, but then sometimes when I click on a link or anything that would make my computer load a new page, it would load forever, the top loading bar for the link stops