What TCP/UDP ports need to be open for VPN Client version 4.8?

What TCP/UDP ports need to be open for Cisco VPN Client version 4.8 to work?
Thanks,

Normally, you need the following ports and protocol :
UDP 500
UDP 4500
ESP
In case, you are using IPSec over TCP you have to open, TCP port 10000 or any other port you want to use for IPSec connections (Its configurable).
-Kanishka

Similar Messages

Which TCP/UDP ports need to be opened on a firewall for adobe reader and flashplayer?

Which TCP/UDP ports need to be opened on a firewall for adobe reader and flashplaer to operate properly? This would include updating, linking, and any subset of features.

The Acrobat Family uses TCP HTTP/HTTPS for all traffic. The following processes and ports may be active on a Windows client machine:
AdobeARM.exe - automatic updates - port 443
AcroRd32.exe - brand messages - port 443
AcroRd32.exe - links in documents - anything specified in the URL
Acrobat.exe - brand messages - port 443
Acrobat.exe - links in documents - anything specified in the URL
AdobeCollabSync.exe - Tracker review data - port 443
The same ports are used by the program components on OS X.
There are no inbound listening ports for any elements of the Acrobat Family. Automatic updates are not pushed and there are no server processes within the software.

What ports need to be opened for Podcasting?

To all,
I am a little lost. We have a server which is inside our firewall. What we're trying to do is to use this server as a test bed for podcasting. Our network admin is going to set it up so that it's behind the firewall but we can still access the content from home or anywhere. Now my question. The admin has asked us what ports need to be opened for podcasting. We have no idea. Is this something we need to setup on the server we are using or is there something else.
FYI - We are using a Windows NT server...I know, I know, I need to upgrade.
Any help is greatly appreciated. Thank you in advance.
zanm
Other OS windows NT server

Podcasting is not streaming on content, only downloading. It is basically a blog with an attachment in the RSS feed. Only port 80 (normal web port) needs to be able to go through the firewall.

Which ports need to be open for messages and facetime to work properly?

I noticed that Messages no longer works since upgrading to Yosemite on my work network. But it did when i was in Mavericks. Did they change something in Messages in the upgrade that would cause it to no longer work? ports?
I'm behind my work firewall, which ports need to be open for messages to work properly?

Just make sure your 9001 port is open.
Hope this works..
Hamid

What is the Firewall ports need to be open for TED distribution working properly

Hi ,
May I know what ports need to be open at the firewall in order the TED
distribution to be working properly.
I suspect it is firewall problem because the inventoried server which
is install at the same segment with the TED distributor server, I manage to
push the policy and collect inventory data , but for those inventoried
server which is install at the remote site, I fail to push the TED into the
server. At the TED distributor server, the log say that computer refused
connection. And there is a firewall in between the TED distributor server
and the remote inventoried server.
Thank you.
Steven Foong

TED is using 1229
Ron
<[email protected]> wrote in message
news:X7lAe.2193$[email protected]..
> Hi ,
>
> May I know what ports need to be open at the firewall in order the
TED
> distribution to be working properly.
>
> I suspect it is firewall problem because the inventoried server which
> is install at the same segment with the TED distributor server, I manage
to
> push the policy and collect inventory data , but for those inventoried
> server which is install at the remote site, I fail to push the TED into
the
> server. At the TED distributor server, the log say that computer refused
> connection. And there is a firewall in between the TED distributor server
> and the remote inventoried server.
>
> Thank you.
>
>
> Steven Foong

What ports need to be open for device enrollment?

I'm able to install the trust profile on an iPhone, but when I attempt to "Enroll" my device and I click "Install" it begins the process,
Installing Profile, Generating Key, Enrolling Certificate and gets stuck and reports a network issue.
I'm also hoping we can get our hands on some proper lion documentation. The resource page is pretty bleak right now.

Yea they should have that info on the kbase. I have been reading up on this as well, as my clients never worked and finding out you need ports open.
I believe this is correct, if not someone correct me:
Ports for Profile Manager - 2195, 2196, 5223, 1640, 80, 443 Apple Server block to open too: 17.0.0.0/8
TCP Port 2195 and 2196 should be "oubound" from Profile Manager Server to 17.0.0.0/8.
TCP Port 5223 "outbound" from LAN for clients to 17.0.0.0/8
TCP Port 443 and 1640 "inbound" to Profile Manager server. I would think port 80 as well, but any login I would put a cert on and use only 443. Not sure if 80 is really needed.

Do router/firewall ports need to be opened for higher bandwidth?

Currently I use iChat between myself and my mom across town with decent results. The video is blurred but extremely smooth.
We are both on broadband with different ISPs (Telus & Shaw) with our own routers. None of the ports on either router are open for iChat yet we connect fine.
If I opened up iChat ports on both routers will that allow more bandwidth to flow through the video resulting in less blur?

Hi
No it will not give any more bandwidth, seeing you have iChat working i would leave the ports alone
Have you both set the Quicktime settings, goto sys prefs/quicktime/streaming/streaming speed set what you get from your ISP go no higher then 1.5mbps(dont use automatic)
In ichats prefs click on video and change bandwidth limit to NONE.
Restart iChat.
Tony

What tcp/udp ports are required to access the app store via a firewall?

we have ports 80/443 open but users are still unable to connect.

You should be ok - but read this. Try opening 2195 and 2196. If you still have issues
port watch and see what an iPad does when trying to get to the store.
http://support.apple.com/kb/TS1629

What TCP/UDP ports are required for Sunray to communicate withSunray server

Hi,
Our Sunray appliances and Sunray servers are setting in two different VLANs. For there is no ACL applied between both the VLANs, but we are plannin g to place ACL between these two VLAN for security reason. Do any have a list of ports require for Sunrays to communicate with the Sunray server.
Thanks for the Help
Moe Hans
Network Administrator
Kwantlen Polytechnic University
Surrey, BC
[email protected]

[http://wikis.sun.com/display/SRSS4dot2/Ports+and+Protocols]

TCP/UDP ports between Cisco PI 2.0 and WLC5508

Hello,
I will install Cisco PI 2.0 behind a firewall for security reason. The WLC5508 is before a firewall. Can anybody let me know which TCP/UDP ports need to be open specifically between the Cisco PI and WLC? I don't see that from the below link.
Cisco Prime Infrastructure 2.0 Quick Start Guide
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-0/quickstart/guide/cpi_qsg.html#wp46865
Thanks,
Robert

Firewall Between the WCS and Controller or WCS and the WCS User Interface
When a PI server and a PI user interface are on different sides of a firewall, they cannot communicate unless these ports on the firewall are open to two-way traffic:
80 (for initial http)
69 (tftp)
162 (trap port)
443 (https)
Open these ports in order to configure your firewall to allow communications between a PI server and a PI user interface.
Regards
Dont forget to rate helpful posts

What ports need to be opened from apple's firewall?

I googled that qmaster uses port 10012 tcp&udp, but what ports need to be open for Qadministrator and Batch Monitor?
They didn't seem to work just with 10012.
Is there any documents about this from apple?
Idea of just leaving firewall off sounds like Microsoft in te 90s'.
And even they have made an interactive firewall that asks you to open a port when some application tries to use it.
Well, these fcp applications are sooo PRO...

On the Qmaster system prefs pane, turn on the "Show Qmaster status in menu bar" option in the advanced tab.
Then click the Qmaster icon on the menu bar, and it will show you all active Qmaster services, and their TCP port. You would need that port open. You need to do this on every computer on the cluster.
In your setup, are all the computers on the same subnet? Although you may be on a large network, you can rope off your systems into their own sub network, with a master firewall and avoid this type of problem. Each computer will have a different port, and that port will change every single time you start and stop the service. The TCP port will fall between 40000 and 65536 (the highest port ranges).
So, again I recommend protecting the network which will protect all the systems universally. But try setting the TCP ports listed on all the service nodes, and remember that those will change whenever you start and stop the service. (I'm not sure if the port will change after a reboot as well.)
Good luck

TCP/UDP Ports and site used by FEP to download updates - needed to allow on perimeter firewall

Can some one point me with information like what TCP/UDP ports are utilized by FEP and what DNS / site Name it uses to download FEP Updates. This is needed to tighten perimeter FireWall policies
Thank you

It should be the same as the documentation for all Software Updates:
https://technet.microsoft.com/en-us/library/bcf8ed65-3bea-4bec-8bc5-22d9e54f5a6d#BKMK_ConfigureFirewalls
Make sure to expand the "restrict access to specific domains" section to see the update related URLs.

What ports need to be open on Fw for Waas Communication--Urgent

Hi All,
This product is new to need your help in configuring this. I am explaining the architecture below:-
We have a requirement to use WAVE-594-K9 Software Release 5.3.1 and in our Manila location and it will not talk to Waas central Manager in our client location instead client has installed one same model Wave-594 in PHX.
So now client has said it will only be used for caching contents and not for optimizing, they have some video training on web which will be passed through this wave and for making them highly/fastly available to agents they want to use this.
We have installed one Wave in Manila in application-accelerator mode and using PBR to redirect the desired traffic via Wave. As per our client Manila Wave will talk to PHX wave and PHX wave will get registered to Waas Manager in client network.
We have firewall between PHX wave & Manila wave, please let me know do we need to opened tcp/udp ports on FW for opening the communication between these two waves?
and what else i need to configure on Manila wave?
This is very urgent quick reply will be highly appreciated!!
Thanks!!
Bhisham

Thanks for the quick reply Kanwal!!
I checked with my team in PHX and we have Juniper FW in between these two Wave's, so what i understand from the links which you have shared.
In Manila Wave i need to configure that in Directed Mode and udp port 4050 needs to be opened bi-directionally on Juniper FW between IPs configured on wave devices.
In Manila we have 10.111.x.189 (Virtual-Blade IP) & 10.111.x.190 IPs & in PHX we 63.149.23.x & 63.149.23.x (VB) so from both IPs we required to open udp 4050 bi-directionally? Want to be sure before raising any request :-)
In PHX wave i am not sure whether we can configure that in directed mode and if it’s not then also it will work by opening port 4050 on FW Right?
In last our client was saying that Manila Wave will only be used as cache engine (VB is configured as content-engine) and it will download contents from PHX Wave (which is registered to CM at client side), what does it mean and do i need to do any special config on wave to achieve this?
I am very new to this device and lot of research on net confused me a lot, please don’t mind!!
Will wait for your reply then only i will raise request with FWteam.
Thanks,
Bhisham

What Ports need to be opened during Exchange migration?

Hi Team,
I am working on a Migration project (Ex2007 to Ex2013). Same forest same domain but are in different sites.
Please find the below details
AD Site1 - Ex2007 Servers
2 Mailbox Servers (CCR)
2 (HUB+CAS) in NLB
2 Domain Controllers
AD Site2 - Ex2013 Servers
2 Multi Role Servers (MB+CAS) with DAG
2 Domain Controllers
We have firewall in between data centers, could some one help me out what ports are need to opened on firewalls.
Thanks,
Balgates
Regards, Balgates

808 (TCP)
Mailbox Replication Service uses to communicate
53 (TCP)
DNS
135 (TCP)
RPC End Point
389 (TCP)
LDAP
3268
LDAP
1024 > (TCP)
if mailbox store is not statically configured then 1024 higher ports need to be open
88 (TCP)
Kerberos
445 (TCP)
Microsoft-DS Service
443 (TCP)
Mailbox Replication Proxy service uses port 443 to communicate with other Exchange 2010 client access server via HTTPS.

What are the ports need to open at firewall

What are the ports need to open at firewall to access Oracle EBS R12 through internet?

All these following ports need to open at firewall??
Database Port : 1521
RPC Port : 1626
Web SSL Port : 4443
ONS Local Port : 6100
ONS Remote Port : 6200
ONS Request Port : 6500
Web Listener Port : 8000
Active Web Port : 8000
Forms Port : 9000
Metrics Server Data Port : 9100
Metrics Server Request Port : 9200
JTF Fulfillment Server Port : 9300
MSCA Server Port : 10200-10205
MCSA Telnet Server Port : 10200,10202,10204
MSCA Dispatcher Port : 10800
Java Object Cache Port : 12345
OC4J JMS Port Range for Oacore : 23000-23004
OC4J JMS Port Range for Forms : 23500-23504
OC4J JMS Port Range for Home : 24000-24004
OC4J JMS Port Range for Oafm : 24500-24504
OC4J AJP Port Range for Oacore : 21500-21504
OC4J AJP Port Range for Forms : 22000-22004
OC4J AJP Port Range for Home : 22500-22504
OC4J AJP Port Range for Oafm : 25000-25004
OC4J RMI Port Range for Oacore : 20000-20004
OC4J RMI Port Range for Forms : 20500-20504
OC4J RMI Port Range for Home : 21000-21004
OC4J RMI Port Range for Oafm : 25500-25504
DB ONS Local Port : 6300
DB ONS Remote Port : 6400
Oracle Connection Manager Port : 1521

What TCP/UDP ports need to be open for VPN Client version 4.8?

Similar Messages

Maybe you are looking for