What technical scenario need for an Plan Driven?
Hello experts.
First of all; thanks four yours help and sorry for my english...
I want implant an Plan Driven with SRM 5.0 and ECC 6.0. My dude is the follow: what is the best technical scenario ? Classic or Classic extended ?
I explain a little:
1.- We don´t want makes Shopping cart in SRM.
2.- We bring the documents of ECC for Sourcing.
3.- We makes bids from Sourcing cockpit ( bbpsoco01 )
4.- We simulates that the vendor into the system to makes quots. we don´t want SUS.
5.- The contract are local in SRM but it´s replicated in ECC.
6.- PO are locals in ECC.
7.- Invoice and confimance goods / services in ECC.
I need helps please!
THANKS FOR ALL.
José Luis
Hi Jose,
I would recommend you to implement the Classic Scenario for a simple reason that you want the leading P.Os in ECC.
If you implement the classic scenario all your requirements get fulfilled except taht even contracts will be created in ECC but not in SRM.
Confirmation and invoice can be done in either ECC or SRM based on your convenience.
Hope this makes you more clear and helps in resolving your issue.Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja
Similar Messages
-
What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit
What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit
Hi,
just found your post...
To install your HP1010 on Win7do the following:
Start
Devices & Printers
Add a printer
Adda local printer
Use an existing port: DOT4_001 (Generic IEEE...)
Next
Pick HP from manufacturer
Select HP LaserJet 3055 PCL5
Next
Name the printer something to your liking
Finish (or so, just follow the prompts)
Here you are!
Works every time for me, never had a problem from any application.
I don't know how this forum works and if i am notified if you reply or anyone else posts on this thread, so i try to check it again soon to check if you left a message. Be with me...
Matt -
What is the need for setting property data inside the JMSMesage
Hi
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball");
and also please tell me how can the MDB recievies this property data ??
Thanks in advance .raviprivate wrote:
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball"); Look at the detail JMS documentation on [Message Properties|http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/jms/Message.html] .
>
and also please tell me how can the MDB recievies this property data ?? MDB onMessage method argument is the Message object and if you look at the documentation, Message interface has getter methods to retrieve the properties. -
BAPI needed for Material Planning T-code MD20
Hi,
BAPI needed for Material Planning T-code MD20.
Thank You.Hi,
I looked as I needed one too - no BAPI for this - I guess you need to go with batch input for MD20 (worked fine in my LSMW so I guess in ABAP it should be also good)
BR,
Tomek -
What is the need for calling default constructor by JVM?
What is the need for calling default constructor by JVM? why the JVM should intiializes default values to the data
fields if the constructor is not there in our class?mahar wrote:
What is the need for calling default constructor by JVM? Huh? The JVM does not need to call the default constructor. It needs to call a constructor.
You decide which one by the way you use "new".
why the JVM should initialize default values to the data fieldsHuh?
... if the constructor is not there in our class?Huh? The default constructor is always there. It may be private but it is still there. -
Just bought a new iPod Touch 16G - (I think it's a 5th gen.). I used my old iPod to record music rehearsals. This new iPod is stating that my old Belken mic (with new adaptor) is not compatible. Does this new iPod Touch have ability to record audio? If so, what do I need for a mic??
Thanks very much! I found the app, tested it, and it sounds fairly lifelike. Big help!!
-
I have already bought a macbook pro in USA and I want to use it in Europe. What adapter I need for my Airport Extreme?
No power adaptor is needed as the power units are auto-switching. But you will need wall outlet adaptors such as you will find in Apple's World Travel Kit, at AAA stores, and other vendors.
-
HT1222 Since I'm an American, what's the need for me to update?
Since I'm an American, what's the need for me to update?
How does the new update apply to me?What update are you referring to? If you mean iOS 6.1.3, there are a number of security updates that apply to all iOS devices:
http://support.apple.com/kb/HT5704
If that's not what you mean, please explain further.
Regards. -
Can someone tell me what settings I need for ipad texting. I went to Mexico and when I returned the texting does not work on my ipad. The support at Apple wanted to charge me to get info.
THanksCan't address the problem directly, cause even though my iPad4 is Cell+Wi-Fi, I've never put a SIM in it and never had the need to text, SMS or iMessage, from it. When away from the office or home wireless network, I tether it off the iPhone. Skype, both text and video, work just fine thru the Wi-Fi link, though.
HOWEVER, when I was hashing out the contract details to get the iPhone 5 about 14 months ago at Telcel, the representative distinctly mentioned that both Visual Voicemail as well as iMessages would be included in the package and they would be mandatory cause "I was getting a (subsidized) Apple iPhone" on a 24 month leash. Then when the gizmo came out of its box for SIM installation and activation, she went thru the motions of making sure both were working properly. So I assume the carrier has some say in the matter. -
What Equipment is Needed for CCNP Security Lab
Hello,
Im Looking to find out what Devices are needed for a ccnp security home lab. I keep hearing that 2 5510's are a must for labbing. The downside Is the Prices avg $800 each on the low end. I also saw some ppl had an ips in their lab. Im looking to find out what is 100% needed. I alredy have a lab in place used for my ccnp r&s.
ThanksI would also say that two ASAs is a must to practice with them. But in my opinion, 2 5505 SecPlus are enough. What are the differences to the 5510? You configure subinterfaces instead of vlan-interfaces. But that's something you know from R/S. And the failover is only stateless, but failover in general also works. Sof if you find these ASAs for less money, take them. IPS is probably the topic where most CCNP Security students are least familar with. So owning a sensor would also help.
And don't forget that the bigger CCIE-Training vendors have complete labs for rent with all you need for CCNP Sec preparation. That could also save some money.
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni -
What all is needed for this type of Flash Design Studio
What all is needed for this type of Flash Design Studio.
There are a couple of sites out there that use both flash and
shockwave. I am looking ot get somethign like this started and need
some help getting pointed in the right direction. here are some
examples:
http://www.uberprints.com/studio/
http://www.customavenue.com/online-design-studio/online-design-studio.html
https://www.youdesignit.com/youdesignit.cfm
http://www.pixeltees.com/makeRclarkhaddock,
> What all is needed for this type of Flash Design Studio.
There
> are a couple of sites out there that use both flash and
shockwave.
Of the examples you showed, I saw Flash (Adobe Flash),
Shockwave (Adobe
Director), and JavaScript, but never a combination on the
same site. (It
might make sense to combine Flash with JavaScript or
Shockwave with
JavaScript, but not really to combine Flash with Shockwave.)
> I am looking ot get somethign like this started and need
some help
> getting pointed in the right direction.
Any of the above technologies will do it. You could also use
a Java
applet or even a .NET solution of some kind, so the choice
you take will
depend largely on what platform you want to support and code
for. This sort
of project will require significant amounts of custom
programming. My
personal approach would be to use Flash, mainly because of
the popularity of
the plugin. The Shockwave example looks beautiful, and I
started out years
ago using Director, but fewer people nowadays have the
Shockwave plugin
installed. It doesn't look like any of the sites shown use 3D
modeling,
which is the only relevant feature that Shockwave has over
the other
approaches. JavaScript (probably some Ajax approach) would
work -- as
seen -- but then you're dealing with compatibility issues
among various
JavaScript implementations in the great variety of browsers
out there.
Flash minimizes that, in my opinion.
All you really "need" to produce what you've seen is Flash
and some sort
of database back end (MySQL, say), which means you'll need a
bit of
middleware (PHP, ASP, Cold Fusion, etc.) to act as your
ambassador between
Flash and the database.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design." -
what permission is needed for a login to access the restored database(backup from different server)
frequently reach the situation, when vendor restores a database, but he cannot access it unless I remap or add his login to the restored database. What permssion can grant the vendor so that he can but only can access the database he restored, not all other
databases.Hi George,
According to your description, When you move a database from one server that is running SQL Server to another server that is running SQL Server, a mismatch may occur between the security identification numbers (SIDs) of the logins in the master database
and the users in the user database. As other post, you can use the sp_change_users_login stored procedure to map SQL Server logins. Also , you can use the following statement after doing the restore database. It will
fix the mis-mapped SID inside the restored DB.
ALTER USER <username> WITH LOGIN = <username>
For more information, you can review the following article.
http://blogs.lessthandot.com/index.php/DataMgmt/DBAdmin/MSSQLServerAdmin/do-you-still-use-sp_change_users_login/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
What software is needed for system recovery? (cont'd)
What software is needed for system recovery of a Toshiba Satellite Pale8u-02p01D (also known as L355D-S7901) running Vista?
If I can just get the name/number for the recover software I will get it from eBay.
Thanks!
Solved!
Go to Solution.Satellite L355D-S7901
If you want to look for that on eBay, look for the recovery discs for the model above. I doubt you'll find them there.
You can order them from Toshiba, of course.
Order Toshiba Recovery Media
And you might get them cheaper from a third-party vendor.
Digitalmedia-labs.com
MyRecoveryCDs.com
Recovery-CD.com
RestoreDisks.com
RestoreCD4u
-Jerry -
Setting needed for Capacity Planning.
Hi PP Gurus,
I want to know what setting we have to do for capacity planning.
what I know is:
1. W/C should be set for finite scheduling.
2. In scheduling parameters for process order tick "Generate capacity Requirement".
This both setting are made in my scenario, but it is'nt loading the work center fot that week.
Any other setting nedded?
Thanks, in advance.Dear ,
You need to have following set up at basic level frist before you perfomr the capacity requirement planning :
1.In OPKP-Define Production Scheduling parameter -Availability check -Confirm Capacity and also Finite Scheduling chekc box ticked .
2.In OPU3/OPU5-Define Scheduling Parametesr -you should mark the following
1.Automatic Scheduling check box should be marked
2.Scheduling Log check box should be marked -generate in case there is a scheduling error due to capacity over load .
3.Scedulinga and Generate Capcity should be ticked .
3.In OPJK Imaintain check capacity with SAPSFCG013 overall profile and set indicator -1 -Release Order -by user decision if capacity is insufficient
4.Work Center - Define the capcity planner group,activate checkbox Relevant for Finite sceduling,on the capacity header define the shift timings,break timings and unit of measure,no of individual capaity, enter formula for scheduling in capacity view.
5.Routing - enter the values for the standard values. Use control key with scheduling and CRP activated .
6. OPD0 and have the following set up : Overall profile : SFAPSFC015 --Inside the over all profile I have the following set up
1.Selection Profile -SAPSFCS013 SFC: Order view, standard overview
2.Control Profile : SAP___C004 : Gen Capacity Availability Check for 1.5 months
3.Time Profile : SAP___Z006 : Gen Capacity Availability Check for 1.5 months
4.Evalution Profile : SAPSFCA013 : Gen Capacity Availability Chek =3.0D
5.Strategy Profile : SAPSFCVER1-Gen Capacity availability Check
6.Period Profile : SAP___P001 -Weekly period
7.List Profile : SAPSFCI001-Production Planing
Check all of them in place .Then you can go ahead with Capacity Req.Planning -Evalution and Leveling -CM21/CM22/CM05/CM07 etc.
Refere the below theread for farther reference :
Capacity problem in production order
capacity planning
Hope this will be useful .
Regards
JH -
Technical specifications needed for ECC 6.0
Technical Specifications for ECC 6.0
Posted: Oct 8, 2007 7:49 AM Reply E-mail this post
Hi,
I am planning to buy a laptop & install ECC 6.0 for the trainings, just wanted to know what technical specifications & additional system components , accessories services should I look for?
Points will be rewarded!!!!
Regards,
PoornimaDear Poornima,
As per my experience,better to go for above 160GB hard drive(250GB will be
good) and 2 GB RAM is required for Laptop's.
All the best.
Regards
Mangal
Maybe you are looking for
-
"Script Alert" cannot upload files
I am using Photoshop CC 64bit. I used the program yesterday and worked like normal. Tried to use the Scripts image processor and it gave me this warning. I keep trying it and sometimes some files work but I still can't open them up. What can I do?
-
Which color of ipod nano 7th generation is better?
I am going to buy an ipod nano 7th generations and there is a lot of colors to chose from. Which is more nice looking?
-
Unable to start sun java web server 6.1 SP4
Hi, I have recently installed sun java web server 6.1 SP4 on solaris 10. The directory structure it created was completely different from the one mentioned in the documentation. I could not find the https-adminserv directory under the web server root
-
How to open a doc file using jsp Anchor tag
when i am trying to open a doc file using a jsp it is opening with out proper alignment. how to open a doc file with proper alignment using Anchor Tag in JSp Page
-
What might be the reason of this: ================================= Creation of the SOAP Connection Factory Error. javax.xml.soap.SOAPException: Unable to create SOAP Element Factory: Unable to create SOAP Factory: Provider com.systinet.saaj.soap.SOA