What the hell is this splodgy nastiness?
I've had this on image previews since LR5. It happens in images with deep shadow - often with lots and lots of +shadows & blacks). It persists from library to develop module, and then sometimes in the develop module will disappear. Sometimes I have to make an edit for it to disappear.
develop module image:
But then I go back to the library and the splodgy nastiness is back.
Its d800 nef raw files.
If I zoom in in the library it will render properly (after ~15 seconds), and stay rendered when I zoom out, but often I'll go back to the image and bingo spldgy nastiness is back
things its not:
graphics card (new card gave same results)
other hardware (motherboard/ram/cpu/hard drive) I've changed the lot and it still happens.
D800 raw files (happens with d5300 raws)
things it might be:
some weird colour profile issue (same install of windows through hardware changes). extreme process settings (I push the files to the max).
Create a virtual copy and see if the virtual copy also shows the problem. I think a new VC should make new previews in case there is some problem with the ones associated with that image.
Can you export a DNG of your image with its settings that look back in Library, and then upload that DNG to www.dropbox.com and post a public download link, here? That would allow others to try and replicate the problem on their computers as a way to narrow down if it is something unique to your computer or more widespread.
Similar Messages
-
What the hell is this? Calendar Month View
I'm including a screenshot to help me with this.
On the dates that i have stuff scheduled on, there is some weird text occupying the squares.
Tried google translate, no luck.
What is that?
http://img543.imageshack.us/img543/5118/captureula.pngI think it's a throw back to WP7. The month view wasn't legible using the old WP7 resolutions, so someone decided it would not be worth to show the actual calender entries, instead it displayed some random words (Latin?). Tapping on the date with the text opened up the appointment with the correct entry.
Now with double tap to zoom, and higher resolutions, I don't understand why the actual entries are not displayed.
Even better, why not enable pinch to zoom on the calender.
In short, it's not a bug on your device - it's normal WP behaviour which will hopefully be changed with an update. -
I?had my Zen Sleek in my pocket at school (to listen to on the bus ride home). When?I took out and turned it on, I noticed a dark black spot on the lower right quadrant of the screen. It's always there, even when the player is off! It really is getting annoying. :angry:?My question is: Can?I return it because of this?
I would think it depends on the return policy of where you bought it from. If it's within whatever number of days you have to return it, you should be able to return it.Message Edited by MrPresident on 04-0-2006:33 AM
-
What the Hell is Application Server 10g R2
Hello Experts....I am using Application Server 10g R2 on Windows Server 2003..In the Morning Everything(Especially Reports) Works fine...but in Evening i think it the Report Server get tired...it take too much time to run even simple Report..What the Hell is this..
@Paul M...Thanks for your attention..
its value is 1
maxEngine="1"
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="1" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="90000"> -
Auto analayzer - what the hell???
After i installed Premiere Elements 13 (together with elements organizer) the CPU load is at 50-100% and my System disk is spammed with 30GB of data - and still not finished!!!
in the Task Manager i found a process called "Auto elements analyzer". What the hell is this there going on??? Adobe programms a process that
- runs in the Background and is NOT stopped, when the Programs are closed!
- produces tons of data
- produces immense CPU load
- has no Explanation for what it could or shoud do
what the the hell is that? i am really 1mm from deinstalling this crap!!!PRE_help
Thank you for entering this thread. While you are here, could you clear an important point at an appropriate time so as not to interfere with the good discussion that you are having with elenah at the present time.
In the details for what you and elenah are exchanging, this has nothing to do with the Elements Organizer's AutoAnalzyer options. You can leave them on or off. What this has to do with is an inescapable process of Premiere Elements, that is, conforming audio files (cfa/pek) and conforming video files (mcdb). When you and elenah point to Edit Menu/Preferences/Media, you are pointing to the conformed video files.
Now here is my question to better understand for all of us what happens when the user click Clean Now at that location.
Set Media Cache Size
Default 5 GB
This is meaning to me
a. The file size of the Media Cache Folder in Common Folder is going to be whatever results from the program automatically piling conformed video files (mcdb) files there, be it 1, 5, 50, or 500 GB or whatever.
Cleaning up that pile up and stopping the pile up are different. We are talking user clean up here and not user being able to stop the conforming process.
b. For project automatic monthly, the Clean Now is triggered to reduced that Media Cache file size to 5 GB according to the preference set.
For user manual on demand, the Clean Now is triggered to reduced that Media Cache file size to 5 GB according to the preference set.
At no time is that 5 GB set going to limit the program from piling up as much as it wants/needs to in that Media Cache Folder in the Common Folder for its required video conforming.
Have I interpreted the above correctly or am I overlooking essential factors? In the above interpretation, I see no bug but rather the way the program is designed to deal with video file conforming. In elenah's case, I wonder where the Media Cache Folder video conforming files are tracing back to in the Elements Organizer or elsewhere to generate 50 GB of conformed video files.
Thank you.
ATR -
Elements auto analyzer - what the hell???
Hi,
After i installed Premiere Elements (together with elements organizer) the CPU load is at 50-100% and my System disk is spammed with 30GB of data - and still not finished!!!
in the Task Manager i found a process called "Auto elements analyzer". What the hell is this there going on??? Adobe programms a process that
- runs in the Background and is NOT stopped, when the Programs are closed!
- produces tons of data
- produces immense CPU load
- has no Explanation for what it could or shoud do
i am really 1mm from deinstalling this crap!!!If you do a Google search for 'Photoshop Elements autoanalyzer', you'll find many answers including this link:
FAQ: What is Auto-Analysis, or Why does Organizer freeze?
and this one:
The Elements 12 Auto Analyzer–Adobe’s Evil Undead | Barbara's Sort-of-Tech Blog
You don't state your version of Elements, and that is important, since most of the tasks of the autoanalyzer have been removed from version 13.
The autoanalyzer was mainly used by Premiere Elements users, so I would also ask in the dedicated forum:
Premiere Elements -
What is this? I just downloaded FF 4 beta 1, and I make figure out what all of this at the top of my screen is for. I wish I could send you a screen shot! The actual window is cut in half...what the hell?
== This happened ==
Every time Firefox opened
== As soon as it was downloaded and installedThat's Page Saver, and it's great for taking a snap shot of a webpage. It doesn't capture any of the browser tool bars and such, though, and that's where my problem is. I've got a great splat of toolbar and many many many colored buttons and other random things eating up the top four or more inches of the screen when I open FF4b1, and I can't get rid of it. A screen capture shows the problem well, but something made with Page Saver only shows the web content and none of the browser.
This is turning out to be far more trouble than it's worth. -
Firefox has recently started hanging up in the middle of an email composition; I have to lose my work & restart the app. to continue. Or, it will drop down an address list which cannot be removed; same result. What the Hell is going on? Has Microsoft taken over Firefox?
== This happened ==
A few times a week
== RecentlyThat is correct.
That is the price of a replacement iphone once your iphone is outside of the warranty period -
I have never had any problems with my Zen Xtra 30 gig. Turned on last night, nothing, no tracks nothing. Hooked it up to download the tracks again, nothing, the MP3 links up and shows it's coupled to the PC and will autosync. but when I try to down load, I get the error message
Unable to create file, restart player and start again.
I have tried this, resetting the player, uncouple and recouple but still the same problem.
What the hells going on?
RobFirst of all, relax & don't say bad words on this forum
Try to access Rescue Mode on Your player & perform the "Cleanup" function. This is the best thing to do in this situation. Don't worry, cleanup will not delete songs on your player if they still ali've. Go to the Caterina's thread at the very top of the thread list to figure out how to do that. Good luck -
Why are bt not sorting out the exchanges In THE MIDDLE of big towns cities like ipswich who cant even get up to 8meg "just about 1 meg here" And upgrading everyone to fibre.
I live on one side of ipswich connected to a exchange that is 2km away when there are 2 exchanges within 700 metres of me which are both enabled for fibre what is the bloody logic in this.
What the hell!Not sure where you got the info on Fibre from, I don't think any of the Ipswich exchanges have been enabled for fibre and last time I checked none are even in the list of planned upgrades yet.
I think one or two have been upgraded for the upto 20M (ADSL2+) broadband, though most are in the list to be done during the next 12 months.
From what you've said in other threads I'm guessing you are in one of the blocks of new flats near to the train station. I'd suspect the problem with connecting that area to the central Ipswich exchange is the River Orwell. To get across the river BT (Openreach) would have very limited options, the usual route being in the ducts in one of the bridges. The number of new lines needed for the level of development around you means the cables will be large and it is quite likely that there simply wasn't the capacity in the ducts to get the cable over the river.
If the ducts were full then Openreach would have had to look at other options on how to get service from an exchange, a tunnel would probably not be possible, which would leave looking for an exchange on your side of the river, which appears to be what they have done. If you look at the Openreach plans then they are trialling using fibre to each house/flat for new builds to avoid this sort of issue in future.
So I'd take a guess that the river is the reason you are connected to Belstead exchange. Belstead is due to be upgraded to the upto 20M broadband early next year, but I don't know if that would help your speed much.
Adam. -
My program quits 1 time out of 2 due to SIGNAL 10 or 11 ( SIGBUS and SIGSEGV ) What the hell are these?? How can I fix them? ( I have Mac OS X 10.3 and use XCode 1.0 )
Why I'm still using the old version? Coz I haven't got high speed and it's still downloading ( I'm doin it in many fragments ) i dunno however if it'd change a thing
On google I read refering to an empty pointer in C could cause this error but not in java, right? And it doesn't always happen... -
CS4 Error 148:3 What the hell does that mean?
CS4 Error 148:3 What the hell does that mean?
It's a licensing error and I'm sure the accompanying text in the warning dialog spells it out pretty clearly, despit you not caring to provide that info along with any tangible details about your system. So the only blindfire advise we can give you is this: Error "Licensing has stopped working".
Mylenium -
What the hell i can not download anything because of my adobe reader
this is what it keeps showing me no matter what i download, what the hell is going on?(Adobe Reader could not open ').exe' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). I am going right thru the website trying to download this ???????????????????????????? I am running a mac os x 10.5 pc & adobe reader 9 I have no idea what i am doing wrong someone anyone please HELP
Probably you need to check your file associations. Probably mistakenly .exe file is associated with Adobe Reader which is meant to open only PDF files and not an .exe. Thus when you download an .exe, due to its association to Adobe Reader, it tries to open it and throws that message. Just search on the net and you will find how to change file associations on MAC.
-
What the hell is going on with my MERGE statement
Hi Guys,
I maybe posted this to the wrong forum - appreciate it if you would take a look and let me know what you think.
What the hell is going on with my MERGE statement
Regards,
Mark.The problem exists in the statement in bold. The inline view of the merge
returns 11808 rows and should only perform 11808 lookups on the index
on TBL_INSTRUMENT to determine whether or not to insert a row. It is
doing 1393981363 !!Do you have accurate statistics on these tables? Have you got histograms on skewed columns?
Also, given that you are only acting on WHEN NOT MATCHED are you sure MERGE is the way to go? A straightforward insert driving off a NOT EXISTS sub-query or an anti-join might be a much better approach.
Cheers, APC
Blog : http://radiofreetooting.blogspot.com/ -
I'm really stuck in Just WTF microsoft's just released windows i'm suffering this problem from 1 year now i'm really tired that what the hell is bill gates just released i just want to ask the hell bill gates that i expensed my precious money to buy new
laptop with new hell fucking windows 8 but i didn't knew that the bill gates is just hell who is fucking my money and windows 8 is just the hell thing is the world which taken me far from reliable daily computing instead of effectively getting output from
core i5 . I always face problem of disk 100% usage and the fuckin updates didn't just sought this problem out . What the fuck microsoft just released after the amazing windows 7 and now hell windows 8 without any solution of hell problems . I bought hp envy
dv6 with windows 8 and just facing this problem from 1 year then claimed warrenty but they said this is okay but this is just hell problem with software of microsoft which has no warrenty i never expected such thing from bill gatesherevenku wrote:
why the *** the messagin app is not able to send txt mesage to two or more receipants at a time, when i am able to send the same message to both of them seperately....as it is sending to each person properly, its not prob with SIM/wifi/messaging center number or any other stuff, except for a bug in windows 8! what the hell is goin on ??? can some one please explain the reason for this kind of stuff?
To send a text to multiple recipients you need to tap on the + symbol on the top right of the screen then tap the "Select" icon on the bottom bar. Your recipients list will now have a check box next to each name which you can use to select multiple recipients. When done just tap on the tick icon on the bottom.
Maybe you are looking for
-
Problems with File Transfers Over Firewire 800
Problems with File Transfers Over Firewire 800. Over the past month, I have had problems when transfering files from my harddrive, over Firewire 800 to a portable drive. I usually transfer very large files (20gb or more) to the portable drives for mo
-
Output device not defined error while saving the quotation
Hi all, We have some custom output types (ZGEN, ZSSO, ZQTO, ZJT)configured in the nace transaction for Application V1. Whenever i am creating / saving a quotation one of the output type(ZQTO) is not processing for mail (External Send) and it is disp
-
Issues importing XML photo gallery SWF in Catalyst
Hey everyone, I'm creating a mini-site using Catalyst, and am trying to include a photo gallery on one of the pages. Problem is, the photo gallery uses XML, and grabs the photos from a folder. The photo gallery works great on its own, but when I impo
-
Unable to import tables in RPD
Hi i have craeted the ODBC drivers for my oracle11g database however i am not able to import the tables from it. it says "The connection has failed" Any idea why this error is coming?
-
Transform call returns the xslt??
I have a strange problem. After executing a transform, my result is the original template and not the transformed output. I tested the xslt using Altova and it worked fine. When I try making the transform in my java code, I get the problem. My code i