What the **** is wrong with this stupid machine???????

**** my ipod just broke down for the 2nd time and it's really starting to be annoying..
it won't reset, won't charge the battery, it just shows a sad face.
i was looking for an email adress to contact somebody but it's all by phone and i refuse to pay more f**king money to these crappers. and i don't want to pay about 40 euro's of insurance costs which they charge me if i return my ipod to the shop. this is a serious problem for me..
i want to know if there are any other people with this problem or one that looks like mine.
i'm never using this crap from apple again.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
make a good product for christ sake!!!!!!!!!!!!!!!!!!!!!!!1
hp desktop   Windows XP  

Just in case you would like to have a final try
Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

Similar Messages

  • What the **** is wrong with this Photo app?

    This new Photo app is not working very well, i can't just simply press "delete" button to delete a photo anymore, really?  And I wish I had not deleted my iPhone app...  ****!

    Appreciate it!  I am more of a PS6 and Lightroom person, I only use iPhone to manage small Albums when I am on a time crunch...  now it seems a little more difficult to do with Photo app.  I guess I will have to get used to that.  I don't do edits in iPhoto, just albums, create and delete after upload them to my website.  Wish Apple would have a "trash" folder on the sidebar like they did with iPhoto, so we can just drag and drop to "Trash" on what we need to delete. 
    or even keep it iPhone looking but add all new features and keep the old ones as well lol

  • WHAT THE **** IS WRONG WITH THIS UPDATE TO 8.1

    At first i thought my problems were limited to CDs not importing.....NOW MY IPOD WILL NOT SYNC WITH IT. What's the point of and itunes upgrade if my BRAND NEW IPOD won't sync with it??????

    You might get better answers if you gave more specifics. What error messages are you getting? What exactly is happening?

  • What the **** is wrong with my POSTCODE?

    Oke, here we are. First of all my VISA credit card is rejected, i mean paymant method is not accepted? WHY? I don`t know, cuz this creditcard is valid until 8.2017. It wasn't used before on other Apple ID, I'm from Roumania but the creditcard was made in Italy, so I choose both Countries when it asked me for Store, nothing, rejected again. And 2nd thing? What **** postcode should I use cuz every postcode from every **** town/location from this country is not valid?!?!?!?!!? What the **** is wrong with this OS???? Is like i`m gonna hire to NASA!!!!! Sorry for my bad english but i spent 2 **** days to make a **** apple ID to get a **** free application and i can't find in good postcode and seems i need to make 124723908572 credit cards in 9837458937453 countries!

    You have to use a valid credit card from the country you reside in.
    You can only use a store of the country you reside in.

  • What the **** is wrong with my iMac?

    I'm gong to keep this nice and short... I have a memory card reader plugged into a Belkin USB hub which is obviously plugged into my iMac. When ever I put a card into the card reader it will work the first time, but on the next few tries it won't mount on the desktop or show up in Disk Utility. If I keep trying eventually I'll put the card in and the ENTIRE system will lock up (iTunes stops playing, iChat freezes, Finder freezes, EVERYTHING) the mouse still moves but I can't click anything. It's done this twice in the last half hour and 3 times throughout the week. So as the topic says "What the **** is wrong with my iMac?"

    maybe its not the iMac but the flash memory instead. It could be the drive is corrupt and the computer is having a tough time reading it. Try erasing and then reformatting it to see if that changes anything

  • What is going wrong with this config ??

    Hello guys,
    I am busting my head to find out what is going wrong with this config and cant figure it out since i am not an advanced cisco technician.
    Problem is that i cant access the 94.70.142.127 server that is supposed to be in a DMZ zone.
    I know it is a bit chaotic but would really appreciate any help since i am running on a deadline.
    I am building the config step by step and although it seems to be working access to the server all of the sudden is denied.
    No idea if its a NAT issue a firewall issue or a security audit issue.
    There are 3 vlans.
    Vlan 1 is the inside network.
    Vlan 2 is the DMZ server
    Vlan 3 is the Management Network.
    thanks in advance
    Building configuration...
    Current configuration : 11796 bytes
    ! Last configuration change at 11:28:33 PCTime Fri Jan 4 2013 by admin
    ! NVRAM config last updated at 11:27:51 PCTime Fri Jan 4 2013 by admin
    version 12.4
    no service pad
    service tcp-keepalives-in
    service tcp-keepalives-out
    service timestamps debug datetime msec localtime show-timezone
    service timestamps log datetime msec localtime
    service password-encryption
    service sequence-numbers
    hostname R1
    boot-start-marker
    boot-end-marker
    security authentication failure rate 3 log
    security passwords min-length 8
    logging message-counter syslog
    logging buffered 4096 informational
    enable secret 5 $1$oT7y$BwhdEjMJfAaTQI3dzDVwP.
    no aaa new-model
    memory-size iomem 10
    clock timezone PCTime 2
    clock summer-time PCTime date Mar 30 2003 3:00 Oct 26 2003 4:00
    crypto pki trustpoint TP-self-signed-2567543707
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-2567543707
    revocation-check none
    rsakeypair TP-self-signed-2567543707
    crypto pki certificate chain TP-self-signed-2567543707
    certificate self-signed 01
      30820244 308201AD A0030201 02020101 300D0609 2A864886 F70D0101 04050030
      31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
      69666963 6174652D 32353637 35343337 3037301E 170D3133 30313032 30383431
      35335A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
      4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32 35363735
      34333730 3730819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
      8100ABA4 B7FFF4F1 9FBE79D8 2CEBCA68 A14BE3AB DBF770C2 EB35A954 B271AE3E
      F8485837 F2E8566B 66E5EF6B BCFCDFA3 8F6F91F3 FD8E3015 879A67F5 85DD95F5
      C26875C0 2202CA6C CE95888F 545AB4F6 6F708A0E C65E78D1 60967480 5589F5EE
      80505E46 8767CE2C 37C994FE AB555AF0 BA4C4679 63FF7641 34FFF6EF 3EC38006
      46B90203 010001A3 6C306A30 0F060355 1D130101 FF040530 030101FF 30170603
      551D1104 10300E82 0C52312E 646F636E 65742E67 72301F06 03551D23 04183016
      8014F0DE 85318FB3 70C36B4A FEB4B0CA 446025F0 329C301D 0603551D 0E041604
      14F0DE85 318FB370 C36B4AFE B4B0CA44 6025F032 9C300D06 092A8648 86F70D01
      01040500 03818100 5D76D5F4 5FB659C3 1E5B3777 420E1703 CD019889 AE79390D
      A2AA4D26 AD9913B4 B3292277 97ACACDD D7093465 78279B4D 5FAC0A21 EFBF3B74
      6A25BC5B ACFB648F 08F92678 00BB495C 037DEAF7 C5910944 3D2C0643 EA19E9BD
      0AFE5423 AADBB3C2 B2C94296 DABE0D3D 6438F7A8 32B0A92B 3E8E0D26 635070A3
      ACF87E49 65A9E468
          quit
    no ip source-route
    ip cef
    no ip bootp server
    ip domain name docnet.gr
    ip name-server 195.170.0.1
    no ipv6 cef
    username admin privilege 15 view root secret 5 $1$Lny5$et1FhWOpIKOOYRUtN89H10
    archive
    log config
      hidekeys
    ip tcp synwait-time 10
    ip ssh version 2
    class-map type inspect match-any WebService
    match protocol http
    match protocol https
    class-map type inspect match-all sdm-cls-sdm-pol-NATOutsideToInside-1-1
    match class-map WebService
    match access-group name WebServer
    class-map type inspect match-all ccp-cls-sdm-pol-NATOutsideToInside-1-1
    match access-group name Spoofing
    class-map type inspect match-any CCP-Voice-permit
    match protocol h323
    match protocol skinny
    match protocol sip
    class-map type inspect match-any tcp-udp
    match protocol http
    match protocol https
    match protocol dns
    match protocol icmp
    class-map type inspect match-all ccp-cls--3
    match access-group name mng-out
    match class-map tcp-udp
    class-map type inspect match-all ccp-cls--2
    match access-group name mng-self
    class-map type inspect match-all ccp-cls--4
    match access-group name mng-out-drop
    class-map type inspect match-any ccp-cls-insp-traffic
    match protocol cuseeme
    match protocol dns
    match protocol ftp
    match protocol h323
    match protocol https
    match protocol icmp
    match protocol imap
    match protocol pop3
    match protocol netshow
    match protocol shell
    match protocol realmedia
    match protocol rtsp
    match protocol smtp extended
    match protocol sql-net
    match protocol streamworks
    match protocol tftp
    match protocol vdolive
    match protocol tcp
    match protocol udp
    class-map type inspect match-all ccp-insp-traffic
    match class-map ccp-cls-insp-traffic
    class-map type inspect match-any http-https-DMZ
    match protocol http
    match protocol https
    class-map type inspect match-all sdm-cls--2
    match class-map http-https-DMZ
    match access-group name web_server
    class-map type inspect match-any MySQLService
    match protocol mysql
    class-map type inspect match-all sdm-cls--1
    match class-map MySQLService
    match access-group name DMZtoMySQL
    class-map type inspect match-any ccp-cls-icmp-access
    match protocol icmp
    match protocol tcp
    match protocol udp
    class-map type inspect match-all ccp-icmp-access
    match class-map ccp-cls-icmp-access
    class-map type inspect match-all ccp-invalid-src
    match access-group 100
    class-map type inspect match-all sdm-nat-https-1
    match access-group 102
    match protocol https
    class-map type inspect match-all ccp-protocol-http
    match protocol http
    policy-map type inspect ccp-permit-icmpreply
    class type inspect ccp-icmp-access
      inspect
    class class-default
      pass
    policy-map type inspect sdm-pol-NATOutsideToInside-1
    class type inspect ccp-cls-sdm-pol-NATOutsideToInside-1-1
      drop
    class type inspect sdm-cls-sdm-pol-NATOutsideToInside-1-1
      inspect
    class type inspect sdm-nat-https-1
      inspect
    class class-default
      drop
    policy-map type inspect ccp-inspect
    class type inspect ccp-invalid-src
      drop log
    class type inspect ccp-protocol-http
      inspect
    class type inspect ccp-insp-traffic
      inspect
    class type inspect CCP-Voice-permit
      inspect
    class class-default
      drop
    policy-map type inspect ccp-permit
    class class-default
      drop
    policy-map type inspect sdm-policy-sdm-cls--1
    class type inspect sdm-cls--1
      inspect
    class class-default
      drop
    policy-map type inspect ccp-policy-ccp-cls--1
    class class-default
      drop
    policy-map type inspect ccp-policy-ccp-cls--3
    class type inspect ccp-cls--3
      inspect
    class class-default
      drop
    policy-map type inspect sdm-policy-sdm-cls--2
    class type inspect sdm-cls--2
      inspect
    class class-default
      drop
    policy-map type inspect ccp-policy-ccp-cls--2
    class type inspect ccp-cls--2
      inspect
    class class-default
      drop
    policy-map type inspect ccp-policy-ccp-cls--5
    class class-default
      drop
    zone security out-zone
    zone security in-zone
    zone security dmz-zone
    zone security mng
    zone-pair security ccp-zp-self-out source self destination out-zone
    service-policy type inspect ccp-permit-icmpreply
    zone-pair security sdm-zp-NATOutsideToInside-1 source out-zone destination in-zone
    service-policy type inspect sdm-pol-NATOutsideToInside-1
    zone-pair security ccp-zp-in-out source in-zone destination out-zone
    service-policy type inspect ccp-inspect
    zone-pair security ccp-zp-out-self source out-zone destination self
    service-policy type inspect ccp-permit
    zone-pair security zp-dmz-to-outside source dmz-zone destination out-zone
    service-policy type inspect ccp-inspect
    zone-pair security zp-outside-to-dmz source out-zone destination dmz-zone
    service-policy type inspect sdm-pol-NATOutsideToInside-1
    zone-pair security sdm-zp-dmz-zone-in-zone source dmz-zone destination in-zone
    service-policy type inspect sdm-policy-sdm-cls--1
    zone-pair security sdm-zp-in-zone-dmz-zone source in-zone destination dmz-zone
    service-policy type inspect sdm-policy-sdm-cls--2
    zone-pair security sdm-zp-dmz-zone-self source dmz-zone destination self
    service-policy type inspect ccp-policy-ccp-cls--1
    zone-pair security sdm-zp-mng-self source mng destination self
    service-policy type inspect ccp-policy-ccp-cls--2
    zone-pair security sdm-zp-mng-out-zone source mng destination out-zone
    service-policy type inspect ccp-policy-ccp-cls--3
    zone-pair security sdm-zp-out-zone-mng source out-zone destination mng
    service-policy type inspect ccp-policy-ccp-cls--5
    interface Null0
    no ip unreachables
    interface BRI0
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    encapsulation hdlc
    shutdown
    isdn termination multidrop
    interface ATM0
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    no atm ilmi-keepalive
    interface ATM0.1 point-to-point
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    pvc 8/35
      pppoe-client dial-pool-number 1
    interface FastEthernet0
    interface FastEthernet1
    interface FastEthernet2
    switchport access vlan 3
    spanning-tree portfast
    interface FastEthernet3
    switchport access vlan 2
    interface Vlan1
    description $FW_INSIDE$
    ip address 192.168.0.1 255.255.255.0
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    ip nat inside
    ip virtual-reassembly
    zone-member security in-zone
    ip tcp adjust-mss 1412
    interface Vlan2
    description $FW_INSIDE$
    ip address 192.168.1.1 255.255.255.0
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    ip nat inside
    ip virtual-reassembly
    zone-member security dmz-zone
    interface Vlan3
    description $FW_INSIDE$
    ip address 10.0.10.1 255.255.255.0
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    ip nat inside
    ip virtual-reassembly
    zone-member security mng
    interface Dialer0
    description $FW_OUTSIDE$
    ip address negotiated
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip mtu 1452
    ip flow ingress
    ip nat outside
    ip virtual-reassembly max-reassemblies 64
    zone-member security out-zone
    encapsulation ppp
    dialer pool 1
    dialer-group 1
    ppp authentication chap pap callin
    ppp chap hostname [email protected]
    ppp chap password 7 0918425001505245
    ppp pap sent-username [email protected] password 7 13511B4B1359417D
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 Dialer0
    ip route 10.0.10.0 255.255.255.0 Vlan3
    no ip http server
    ip http secure-server
    ip nat inside source list 1 interface Dialer0 overload
    ip nat inside source static 192.168.0.101 94.70.142.113
    ip nat inside source static 192.168.1.102 94.70.142.127
    ip access-list extended DMZtoMySQL
    remark CCP_ACL Category=128
    permit ip host 192.168.1.102 host 192.168.0.101
    ip access-list extended Spoofing
    remark CCP_ACL Category=128
    permit ip 10.0.0.0 0.255.255.255 any
    permit ip 192.168.0.0 0.0.255.255 any
    permit ip 172.16.0.0 0.15.255.255 any
    ip access-list extended VTY_incoming
    remark CCP_ACL Category=1
    permit ip host 10.0.10.2 any
    ip access-list extended WebServer
    remark CCP_ACL Category=128
    permit ip any host 192.168.1.102
    ip access-list extended mng-out
    remark CCP_ACL Category=128
    permit ip 10.0.10.0 0.0.0.255 any
    ip access-list extended mng-out-drop
    remark CCP_ACL Category=128
    permit ip any any
    ip access-list extended mng-self
    remark CCP_ACL Category=128
    permit ip any any
    ip access-list extended web_server
    remark CCP_ACL Category=128
    permit ip 192.168.0.0 0.0.0.255 host 192.168.1.102
    logging 10.0.10.2
    access-list 1 remark INSIDE_IF=Vlan1
    access-list 1 remark CCP_ACL Category=2
    access-list 1 remark VLan 1 Access
    access-list 1 permit 192.168.0.0 0.0.0.255
    access-list 1 remark VLan 3 Access
    access-list 1 permit 10.0.10.0 0.0.0.255
    access-list 1 remark Vlan 2 Access
    access-list 1 permit 192.168.1.0 0.0.0.255
    access-list 100 remark CCP_ACL Category=128
    access-list 100 permit ip host 255.255.255.255 any
    access-list 100 permit ip 127.0.0.0 0.255.255.255 any
    access-list 102 remark CCP_ACL Category=0
    access-list 102 permit ip any host 192.168.0.101
    dialer-list 1 protocol ip permit
    no cdp run
    control-plane
    banner login ^CWARNING!!!This is a highly monitored private system. Access is prohibited!!^C
    line con 0
    no modem enable
    line aux 0
    line vty 0 4
    access-class VTY_incoming in
    password 7 12292504011C5C162E
    login local
    transport input ssh
    scheduler max-task-time 5000
    ntp authentication-key 1 md5 10603D29214711255F106B2677 7
    ntp authenticate
    ntp trusted-key 1
    ntp master 2
    end

    Hello karolos,
    Here is the thing.
    You said you are trying to access 94.70.142.113 and that is a server on the DMZ but based in your configuration that is not true
    ip nat inside source static 192.168.0.101 94.70.142.113
    So 192.168.0.101 is on Vlan 1 witch is the in-zone
    interface Vlan1
    description $FW_INSIDE$
    ip address 192.168.0.1 255.255.255.0
    security in-zone
    If you got confused with  the security zone that the host is assigned to then just add the following and it should work
    ip access-list extended WebServer
    permit ip any host 192.168.0.101
    Regards

  • What could be wrong with this SuperCluster server?

    Kindly assist, what could be wrong with the super cluster server logs below, it comes up and down. Although as we speak, it is currently up and running now:
    root@ssc0101-mgmt-app1 # zpool status -x
      pool: emagine1
    state: UNAVAIL
    status: One or more devices could not be opened.  There are insufficient
    replicas for the pool to continue functioning.
    action: Attach the missing device and online it using 'zpool online'.
       see: http://www.sun.com/msg/ZFS-8000-3C
    scan: none requested
    config:
    NAME STATE     READ WRITE CKSUM
    emagine1 UNAVAIL      0     0 0  insufficient replicas
    /zonedev/emagine1/zonepool  UNAVAIL 0     0     0  cannot open
    root@ssc0101-mgmt-app1 # iostat -En
    c1t5000C5004382C93Fd0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: SEAGATE  Product: ST960005SSUN600G Revision: 0606 Serial No: 1141P17W1H
    Size: 600.13GB <600127266816 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t5000C500436A6673d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: SEAGATE  Product: ST960005SSUN600G Revision: 0606 Serial No: 1141P1DVT9
    Size: 600.13GB <600127266816 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t50015179596974EDd0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: ATA      Product: INTEL SSDSA2BZ30 Revision: 0362 Serial No:
    Size: 300.07GB <300069052416 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 1 Predictive Failure Analysis: 0
    c1t500151795966AFCBd0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: ATA      Product: INTEL SSDSA2BZ30 Revision: 0362 Serial No:
    Size: 300.07GB <300069052416 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 1 Predictive Failure Analysis: 0
    root@ssc0101-mgmt-app1 # zpool clear emagine1
    root@ssc0101-mgmt-app1 #
    SUNW-MSG-ID: FMD-8000-4M, TYPE: Repair, VER: 1, SEVERITY: Minor
    EVENT-TIME: Tue Nov 13 18:22:27 WAT 2012
    PLATFORM: ORCL,SPARC-T4-4, CSN: -, HOSTNAME: ssc0101-mgmt-app1
    SOURCE: zfs-diagnosis, REV: 1.0
    EVENT-ID: 6e103a73-e131-4abd-eeab-cacd1b658dce
    DESC: All faults associated with an event id have been addressed.
      Refer to http://sun.com/msg/FMD-8000-4M for more information.
    AUTO-RESPONSE: Some system components offlined because of the original fault may have been brought back online.
    IMPACT: Performance degradation of the system due to the original fault may have been recovered.
    REC-ACTION: Use fmdump -v -u <EVENT-ID> to identify the repaired components.
    SUNW-MSG-ID: FMD-8000-6U, TYPE: Resolved, VER: 1, SEVERITY: Minor
    EVENT-TIME: Tue Nov 13 18:22:27 WAT 2012
    PLATFORM: ORCL,SPARC-T4-4, CSN: -, HOSTNAME: ssc0101-mgmt-app1
    SOURCE: zfs-diagnosis, REV: 1.0
    EVENT-ID: 6e103a73-e131-4abd-eeab-cacd1b658dce
    DESC: All faults associated with an event id have been addressed.
      Refer to http://sun.com/msg/FMD-8000-6U for more information.
    AUTO-RESPONSE: All system components offlined because of the original fault have been brought back online.
    IMPACT: Performance degradation of the system due to the original fault has been recovered.
    REC-ACTION: Use fmdump -v -u <EVENT-ID> to identify the repaired components.
    Thanks in advance for your support.

    Let's check the details of the fault. We can run the fmdump command to get the details. Run the following command and post the output.
    fmdump -v -u 6e103a73-e131-4abd-eeab-cacd1b658dce
    thanks
    Erik

  • What the *+ৠis wrong with my Epson Stylus SX100?

    It was working fine in Snow Leopard up until a couple of hours ago.
    When I tried to use it a few minutes ago it suddenly won't print any more.
    It makes like it's about to print - the driver starts up etc, but then shuts down again without printing.
    What's gone wrong ? Don't tell me to delete the printer in System Prefs and then select it again. I did that already. Don't tell me to reinstall the driver. I did that too. Don't tell me to reboot, run scripts, etc. Did all that.
    FWIW here's what the Console says:
    Nov 23 16:00:27 unknown-64-b9-e8-ba-88-00 sandboxd[968]: rastertoescp(960) deny file-write* /private/var/spool/cups/Library
    Nov 23 16:00:28 unknown-64-b9-e8-ba-88-00 PrinterProxy[962]: .sdef warning for argument 'FileType' of command 'save' in suite 'Standard Suite': 'saveable file format' is not a valid type name.
    Nov 23 16:00:28 unknown-64-b9-e8-ba-88-00 PrinterProxy[962]: Error loading /Users/MY NAME/Library/ScriptingAdditions/YouHelper.osax/Contents/MacOS/YouHelper: dlopen(/Users/MY NAME/Library/ScriptingAdditions/YouHelper.osax/Contents/MacOS/YouHelper, 262): no suitable image found. Did find:\n /Users/MY NAME/Library/ScriptingAdditions/YouHelper.osax/Contents/MacOS/YouHelper: no matching architecture in universal wrapper
    Nov 23 16:00:28 unknown-64-b9-e8-ba-88-00 [0x0-0x55055].com.apple.print.PrinterProxy[962]: PrinterProxy:
    Nov 23 16:00:28 unknown-64-b9-e8-ba-88-00 [0x0-0x55055].com.apple.print.PrinterProxy[962]: OpenScripting.framework - scripting addition "/Users/thomasmuirhead/Library/ScriptingAdditions/YouHelper.osax" declares no loadable handlers.
    Nov 23 16:00:29 unknown-64-b9-e8-ba-88-00 EPSON Printer Monitor[969]: Initializer-based scripting additions have been deprecated. Please update this addition: "/Users/MY NAME/Library/ScriptingAdditions/YouHelper.osax"
    All offers of help accepted !

    (later)
    I had a brief online chat with the guy at Epson and then he sent me an email, which said....
    *START OF WHAT THE EPSON GUY SAID*
    In response to your query if you are having communication problems, firstly I suggest to check the cable connections and ensure the printer is connected directly. Also please ensure that the data cable is no longer than 1.8m. Next try deleting the printer from the Print Centre. Reinstall the printer driver from the CD that came with the printer. Restart the Mac.
    Then you will need to add the printer to the printer list, selecting Epson USB as the printerport. Click Page Setup, choose All. Please try printing again.
    If the issue is not resolved I advise you to try the printer on a different computer to see where the fault lies.
    *END OF WHAT THE EPSON GUY SAID*
    I did all of the above (allowing for the fact that the Epson guy was using "Windoze" language.
    It still won't print.
    The annoying thing is that it was printing fine a few hours ago.
    So maybe you're right, Peter - maybe I just need to leave it off for a while and see what happens!!! I can't think of any other options.
    Has anyone else experienced anything like this?
    It appears to be something in the coding in Snow Leopard. Every time I hit the "Print" button I get a console message that says
    sandboxd[1700]: rastertoescp(1696) deny file-write* /private/var/spool/cups/Library
    Can any of you Unix gurus interpret this piece of code and tell me what's wrong please?

  • What the hecks wrong with my click wheel

    O.K. so every time i turn my ipod off i can hear the click wheel. For example I just randomly spin my click wheel (whene the ipods off) and i hear the clicking noise.
    Whats wrong with it

    The iPod is still in the process of going to sleep. You can put it on hold. The clicking noise should stop after about a minute or two after it has been turned off.
    btabz

  • What the **** is wrong with my phone?

    Okay, let me start off by saying that I am BEYOND angry. I'm ready to throw my phone in the trash. Also, let me say that this has happened TWICE since iOS 8 has come out.
    So, I downloaded iOS 8. First, it took 8 hours to download, and then, another 6 to install. And it couldn't even do that without messing up. It wiped my phone and put it into recovery mode. And when I tried to connect to to itunes to update and restore it, it couldn't do that either. iTunes repeatedly messed up and kept starting over. I tried updating/restoring my phone 17 times before it actually worked, and it took an entire day and a half before I could actually use my phone again.
    And now, with the release of iOs 8.0.2, it has happened again. And let me just go on record and say that I did not even start this download. I was scared this would happen to me again, so I was refraining from installing another messed up update. But of course, Apple shoved their update down my throat and installed itself while I was at work, leaving my phone, once again, in recovery mode. Now this wouldn't be a problem, except for the fact that I need my phone. Last time, this happened over the weekend, so it wasn't really an issue, but it's the middle of the week and I have things to do. Also, the update and recovery isn't working. It gets halfway (if that) through the update and then disconnects my phone and calls it quits. What the **** am I supposed to do? I've tried doing the update/restore at least 15 times since I got off work, and at this point, I' ready to give up.

    You opened itunes on your computer?
    You connected the iphone?
    You looked at the bottom of the screen at the usage bar?
    I only shows apps?

  • Any hints on what may be wrong with this GROUP BY statement?

    Hi,
    I am testing the code below suggested on this site. When I tried it code and during my CHECK, and it gets to the GROUP BY line, and jumps back to the SELECT statement with the following message (even though DATE2 is in the GROUP BY statement):
    E:The field "/BIC/AODSSSS00~DATE2" from the SELECT list is is
    missing in the GROUP BY clause. is missing in the GROUP BY clause. Is
    missing in the GROUP BY clause. is missing in the GROUP BY clause. is
    I have played around, changing DATE2 in the GROUP By line with /BIC/AODSSSS00~DATE2 or /BIC/AODSSSS00-DATE2 or /BIC/DATE2, but still I get likewise.
    loop at RESULT_PACKAGE into wa_RESULT_PACKAGE.
    SELECT NUM ITEM /BIC/DATE1 DATE2 sum( QTY ) as QTY
    INTO corresponding fields of table it_TABLE1
    FROM /BIC/AODSSSS00
    where /BIC/DATE1 <= wa_RESULT_PACKAGE-DATE2
    AND NUM = wa_RESULT_PACKAGE-NUM
    AND ITEM = wa_RESULT_PACKAGE-ITEM
    GROUP BY NUM ITEM /BIC/DATE1 DATE2.
    wa_RESULT_PACKAGE-/BIC/AONTIMQTY = sum.
    MODIFY RESULT_PACKAGE from wa_RESULT_PACKAGE.
    Endloop.
    Thanks

    I am not totally clear on what you want to achieve.  But please look this code over and see if it is closer to what you want to do.
    I changed your workarea to a field-symbol, which are a little more convenient to use.  <result_fields> is already defined for you in your end routine.
    I used tables and fields that exist in our system, but you should be able to translate those back to your system.
    Please let me know if you need more help.
    LOOP AT result_package ASSIGNING <result_fields>.
      SELECT me_order_n me_itemno serv_date SUM( /bic/znosubasp ) AS /bic/znosubasp
      INTO CORRESPONDING FIELDS OF it_table1
      FROM /bic/azmord2d00
      WHERE serv_date <= wa_result_package-serv_date
      AND me_order_n = wa_result_package-me_order_n
      AND me_itemno = wa_result_package-me_itemno
      GROUP BY me_order_n me_itemno serv_date.
        <result_fields>-me_quanti = it_table1-/bic/znosubasp.
      ENDSELECT.
    ENDLOOP.

  • What could be wrong with this resolveNodes / for script?

    Hello, I am stumped and would greatly appreciate some help here.
    I have a table that has the ability to add additional rows.
    Each row includes a "delete" button to clear the row.
    I'd like to hide the "delete" button when another button is clicked.
    There are a variable amount of rows at any given time, so I can't target the button directly.
    I have used the "for" method before, but it doesn't seem to be able to find the nodes in this case.
    My hierarchy looks like this:
    form1
    - productSubform
    - - productJobTable
    - - - productJobRow
    - - - - deleteBtn
    my Javascript looks like this:
    var nodes = form1.productSubform.productJobTable.resolveNodes("productJobRow[*]");
    var len = nodes.length;
    for(var i = 0; i < len; i++) {
            nodes.item(i).deleteBtn.presence = "invisible";
    Can anyone see what could be wrong here?
    Thank you in advance.

    This code worked for me...
      var rows = form1.p1.Table1.resolveNodes("Row1[*]");
      var len = rows.length;
      for (var i=0; i<len; i++) rows.item(i).Button1.presence = "invisible";
    When I used nodes as the variable name, I got this error: "Invalid property set operation."

  • What the **** is wrong with iMovie?

    I work for hours on a project, and when I export it to iDisk, Mobile Me, or iTunes, there are random bits of Audio thrown in all over the projects. What the ****?

    Do you have audio besides the source audio from the clips. E.g. background music from iTunes, iM sound effects, etc.?
    Can you detect the random audio - is it clip audio, other audio such as described earlier?
    What version of iMovie 09?
    How are you exporting to these destinations?
    Did you use any slow motion or speed up advanced edits in your Project?
    Folk here are happy to help but we need a little bit to work with.

  • What's is wrong with this code

    import java.awt.*;
    public class FormulaOne extends Canvas {
    public FormulaOne() {
    super();
    setSize(300, 200);
    setBackground(Color.black);
    public static void main(String args[]) {
    FormulaOne it = new FormulaOne();
    GUIFrame frame = new GUIFrame("Formula One Manager");
    frame.add(it);
    frame.pack();
    frame.setVisible(true);
    public void paint(Graphics g) {
    Image img1 = Toolkit.getDefaultToolkit().getImage("F1.gif");
    g.DrawImage(img1, 0, 0, this);
    I get 3 errors
    1.GUIFrame frame = new GUIFrame("Formula One Manager");
    2.GUIFrame frame = new GUIFrame("Formula One Manager");
    3.g.DrawImage(img1, 0, 0, this);
    the line underneath the error code is what is given with the IDE iam using (Gel)
    The idea of this little code is to get a picture up for my game
    Can anybody help

    I get 3 errors
    1.GUIFrame frame = new GUIFrame("Formula One
    Manager");
    2.GUIFrame frame = new GUIFrame("Formula One
    Manager");
    The two are probably related. The code is looking to create
    an instance of the class GUIFrame. The compiler won't see
    GUIFrame unless you either import it into your source file with
    import <<whatever>>.GUIFrame, or have the GUIFrame class within
    the same package as your new class.
    In addition, you'll also need to make sure that the GUIFrame class
    contains a Constructor that takes a single String parameter, or you'll
    get an error with that line.
    3.g.DrawImage(img1, 0, 0, this);
    ------------------------------it's g.drawImage, not g.DrawImage

  • TS1398 what the **** is wrong with i pad wifi?????????

    Why won't i pad connect to wifi????

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for

  • Want jtable  to be refreshed...on change of the textfield change..

    The code is below and question follows the code : import java.sql.*; import javax.swing.border.*; import java.awt.event.*; import java.awt.*; import javax.swing.*; import javax.swing.table.*; import java.io.*; import java.util.*; import javax.swing.e

  • Problem with Sound Realtek AC'97

    i get alot of crackeling some times, like i shut my computer off and sometimes it crackels and sometimes it doesnt, any help does via have a new driver yet?

  • How to normalize all audio clip volumes using iMovie (2013)?

    Normalizing clip volumes was very easily accomplished in previous versions of iMovie, but this feature appears to have been deleted in iMovie (2013), a.k.a. version 10.0.3.  My project is a simple slideshow with songs added from iTunes, but the volum

  • Are Widgets dead?

    Recently tried to d/l a lyric widget for songs playing in itunes. Most links to lyric widgets are dead/re-directed. Then I realized "Staff Picks" widgets on the Apple site have not bee updated in years. Is the Dashboard dead? I never really use the d

  • Reconstruct Hung

    Hi, Running JES as follows: Sun Java(tm) System Messaging Server 6.2-4.03 (built Sep 22 2005) libimta.so 6.2-4.03 (built 04:37:42, Sep 22 2005) SunOS zzzzzzzz 5.9 Generic_118558-17 sun4u sparc SUNW,Sun-Fire-880 Feeling a little paranoid. Can I interr