What the maximum hdd for iMac (2009-Early)

hi
What the maximum hdd can i put it for my iMac (2009-Early)
and can i put ssd??
my hdd now is
WD3200AAJS-40H3A0

The largest currently available for a notebook drive is 1.5 GBs. Yes, you can put in an SSD.

Similar Messages

  • NOKIA N72: Whats the maximum size for RS-MMC??

    Hi guys...
    I am currently using NOKIA N72...I am planning to buy a New RS-MMC..Can you please tell me the maximum size of RS-MMC FOR NOKIA N72??i mean can i buy a 2GB RS-MMC FOR NOKIA N72??...Thanks in anticipation..Cheers...

    Yeah I thought so, how about 4,8,16, and 32GB?
    Feel free to hit the KUDOS button if you think I deserved it.........

  • HT3775 What the maximum time for quicktime video if you want to export it?

    What is the maximum time I can record a video clip on iphone 3gs that I want to export to macbook pro?

    The duration of the recording would be based on how much free space available.
    On the iPhone go to Settings / General / About to see the available memory.

  • Whats the maximum RAM for my MacBook Pro?

    Thanks to any and all.
    MT3

    Sorry, I thought i included that info.
    From what i found online, it looks as if 4GB is the max. However i can't figure out if thats per slot, or if I can put 2GB in each available slot.
    I currently have 1GB SDRAM per slot.

  • What is the maximum HDD size for Pavilion DV7-3105ea and can I add a 2nd HDD.

    Hi,
    Please could someone advise me as to the maximum HDD size that can be installed in a Pavilion DV7-3105ea.
    Additionally is it possible to add a second HDD.
    Thanks and kind regards,
    jB

    There is no theoretical limit the only limit is what is sold on the market. Any correctly sized SATA laptop drive will work. They do now make 1TB drives that will fit and yes there is a secondary hard drive bay so theoretically you could have 2TB of storage. You are going to need 1 or 2 drives like this:
    http://www.newegg.com/Product/Product.aspx?Item=N82E16822152291
    The drive has to be 9.5 mm in height some 1TB laptop drives are too thick.
    You also likely need a second hard drive caddy/connector like this:
    http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=222&zenid=2a83d0d222d80c6...
    And here is a link to the Manual showing how to get to the hard drive bay:
    Drive Manual
    Check your system to see if a secondary drive caddy/connector is there but it likely is not and you need the part linked above. Good luck.

  • How can I get the Application DVD for IMAC Late 2009?

    How can I get the Application DVD for IMAC Late 2009?

    Disk 2 of the original disks that came with the computer?
    Call Apple, give them your computer serial number, and they will ship you disks for a small charge if disks are available. Go to the Apple Store for your country, then to the bottom of the page//Contact Us for the correct telephone number.
    If that isn't what you ant, can you provide more information?

  • What is the correct cable for iMac 11,2 Intel core i3, mini dvi to vga or mini display port to vga?

    What is the correct cable for iMac 11,2 Intel core i3, mini DVI to VGA or mini display port to VGA to hook up to projector? Thanks!

    mini-DisplayPort.
    Regards.

  • Whats the maximum resolution resolution supported @ 60 Hz on an external display for mid 2014 macbook pro retina 13 inch ?

    whats the maximum resolution supported @ 60 Hz on an external display for mid 2014 macbook pro retina 13 inch ?

    I don't know where you found 1920x1080, but that isn't the max. The INTERNAL display can even support more than that.
    The maximum resolution is really hardware based, and since Thunderbolt 2 has a Mini displayport connector (Mini Displayport 1.2), the max resolution for Mini Displayport is 4k (3840x2160).
    PLEASE NOTE: Not all adapters can support that resolution, most monitors that can run 4k @60Hz have Displayport 1.2 (The most recent revision), Mini Displayport 1.2, and HDMI 2.0. DVI dual link can run 4k, but only 24-30Hz, depending on the monitor.
    Hope this helps!!

  • What are the system requirements for iMac for Photoshop CS6?

    What are the system requirements for iMac for Photoshop CS6?
    Just installed it and get a message saying it doesn't work on "this type of Mac".
    I have an iMac a few years old.....and Dual Core.

    System requirements | Photoshop

  • HDD for iMac 27" mid 2010 Quad-Core Intel Core i7

    I plan to buy iMac Core i7 and hesitating on upgrade the 1TB HDD to 2TB. Worry on the reliability of 2TB HDD. Would like to know what is the exact model of the 1TB and 2TB HDD for iMac Core i7.
    Any kind soul able to disclose the make and model for these two HDD?
    Thanks in advance.

    There is no exact model. Apple has supply contracts with 3-4 different HDD manufacturers and which one you get in your machine would be luck of the draw.
    But the HDD would be covered under the warranty, so as long as you keep backups, you'd only have the hassle of being without a system for a short time if it failed.

  • HT1423 Could someone please fix the broken images for iMac 27 Oct 2013 instructions? I miss the webmaster's email on the bottom of the page...

    I know that's so 90s, but all the images for iMac 27 Mid 2013 are broken. Could someone please look into that?
    Thanks.

    I can see that too. I am referring to <http://support.apple.com/kb/HT1423?viewlocale=en_US#1>. This is the first link for iMac 27".
    Your screenshot refers to <http://support.apple.com/kb/HT1423?viewlocale=en_US#4>.
    This is what I see. I am still confident that this is a problem with the image link:

  • Whats the maximum achievable speed of data transfer from RT to host PC

    Hi
        Anybody can tell me whats the maximum achievable speed of data transfer from RT to host PC, in case of both PXI and CompacRIO.
    Regards
    Visuman

    Hi visuman,
    To be honest, the dataspeed is dependent on how you architect the code, and the data communication channels that you use. 
    There are many factors that influence the maximum transfer rate, including network topology, types of interface used, OS, ambient network traffic etc. 
    You can control two things, packet size, and amount of sleep time between transmissions. 
    By altering the delay between consecutive TCP/IP transmissions and by varying the packet sizes sent from the embedded side to the host side, you can obtain a clear picture of network characteristics between the two devices. The end result is a report of the optimal TCP/IP configuration, that is packet size and sleep time.
    Check out : Developer Zone : Measuring the Maximum Amount of Data Sent Out of a Real-Time Target Device
    Here are some other links that maybe useful for you.
    KB 2M9ARPEW : Real-Time VI to Host VI Communication Methods
    Developer Zone : Real-Time FIFO for Deterministic Data Transfer Between VIs 
    Hope this helps!
    Ashish Naik
    Field Sales Engineer
    National Instruments UK

  • Will there be a patch for the security flaw for iMac version 10.6.8.?

    Will ther be a patch for the security flaw for iMac version 10.6.8?

    What security flaw are you referring to? If you're referring to the recent SSL flaw, that was only present in OS X 10.9.
    Regards.

  • "The rasterized image exceeded the maximum bounds for saving to the PNG format"

    Hi everyone, I'm using Illustrator CS4 and encountering the following problem:
    I made a level map in illustrator that exceeds 10000x10000 pixels. When I try to export the image as a PNG, I get the error "Could not complete this operation. The rasterized image exceeded the maximum bounds for saving to the PNG format". I tried saving in JPG and others as well, but got similar errors.
    How can I get around this?

    Here is an interesting discussion: http://bytes.com/topic/php/answers/735556-png-maximum-dimensions
    -- although the dimensions there are way larger than your paltry 10K x 10K. It appearts not to be a limitation of the PNG format, but solely from the software used.
    Here's a question. What on earth do you think you need 10K x 10K PNG files for?

  • Whats the Best Configuration for Professional Photographers ???

    Hello Everybody,
    Can Please somebody tell Me Whats the Right Configuration for a Photographer I am Into Photography and Have to edit files (Photos ) upto 35 - 60 Mb size In Photoshop CS4 or Phase One Software which itself takes about 1GB of RAM I think Is The New 20" iMac 2.66Ghz with 2Gb RAM enough or do I need a 4GB RAM ??? This is the first time I will be going for a Apple Product so have no Idea about the System Please let Me know as Soon as Possible
    Thankyou

    I think any of the current models would be up to the task. But since you are a pro photographer, you might consider NOT getting the base line 20" model and instead upgrading to the 24" model. Not only do you get a bigger screen to work with when editing your photos, but it also comes standard with 4GB, twice the memory of the 20" model.
    Patrick

Maybe you are looking for

  • Deskjet 3050 - Android

    I have a HP 350 J610a All in one printer and a Lenovo Thinkpad tablet running android 3.1. Both running through our home wifi network.  I have downloaded and installed HP ePrint Home&biz.    Is there anyway i can connect my tablet to my printer? When

  • How do I delete my templates from Word 2011 in OSX 10.8.5

    How do I delete my templates from Word 2011 in OSX 10.8.5?  I cannot find user/library in the finder.  Please help.

  • Does the cam work on yahoo messenger on a New Mac Air

    On a New Mac Air with Yahoo Messenger does the Cam Function work ?

  • Lookup column names with Power Query

    Hi, before I go ahead and change source files, I was wondering if I can use Power Query to get a model with the following data. To simplify the example, I have the following dataset in an Excel sheet: In another Excel sheet, the column names are defi

  • Settings Bundle Slider images

    I can create a Settings.bundle and in it create a slider. But the image I try to create for the MinimumValueImage and MaximumValueImage doesn't appear. I have added the image file to the project; it's in the Resources folder. Do I have to somehow add