What the most stable quality 4gb (2x2gb) memory for the P6n SLi Platinum?
Hi,
I'm looking for the most stable and very good quality 4gb of ram for the P6N sli platinum MB - what make does everyone recommend for this board?
I note that Kingston value ram is mentioned on the Approved list but I wanted something faster than the valueram?
Does anyone have either G.Skill or super talent and if so how do they work? Any other makes that you can recommend?
I know that there have been issue swith 4gb of ram for Xp/Vista 32 bit systems but from what I am reading hopefully the next bios should resolve this ...?
Thanks as this is the only item that's holding up my build now !
I don´t know whats the most stable 4GB solution is, I only can tell you, that I use Micron/Crucial mamory for years and never had any problems.
Actually in my new P6N-SLI Platinum are working 4 1GB dimms of crucial value ram ddr2-667 without problems.
There is a new bois version 1.22 for the platinum which solved the 4GB problem of earlier bios versions.
That was a bios problem and not a problem of the ram.
Manufacturer as Gskill on their GBHZ6400 modules and OCZ on their 1066 SLI modules are using the same Micron chips called D9GMH which are on my values.
They have great potential above the rated 667 speed. Cause i´m coming from germany and at the moment the prices of memory here are very cheap, a lot of people are thinking about upgrading their memory.
All what I read about here in germany G.Skill, Mushkin(very expensive), OCZ, A-data, TeamGroup are the most reliable rams
when it comes to high speeds and low latency modules.
At least I recommend the Crucial Ballistix ddr800 if you are not able to handle special settings in the motherboard bios.
And of course there are coming 2GB modules from most of the manufacturers, so you only need 2 modules for 4GB.
It´s your choice...
greetings from germany
gonzos-revenge
Similar Messages
-
Screen Freez (memory expert needed) P6N SLI platinum
on my pc when i install the first two ddr2 800 and one ddr21066 everything is fine but when i install the fourth ddr21066 the system either freezes at boot up or while doing something. can any expert in memory tell me which setting in bios i have to adjust so i do not get this freeze up (mouse andkeyboard) , your comment will be much appreciated.(this is definitely a memory related issue)
MSI P6N SLI Platinum
Q6600
MSI 256 graphic card ATI HD 2400
2 GB crucial DDr2800 CL6 and two DDR2 1066 CL5
mastercoll 500Watts
window xpsp2im with Jack and MSI doesnt support 1066MHz on the P6N SLi Plat.
Read here:
http://global.msi.com.tw/index.php?func=prodmbspec&maincat_no=1&cat2_no=&cat3_no=&prod_no=1140#menu
Fifth line from top, 800MHz is max.
And yes i know it says so on the box, that 1066 is supported, but it isnt.
But if you think you'll have a faster computer, well it isnt noticeable, that is if you have any gain, cause usually those high MHz DIMM's are on higher latencies then lower MHz DIMM's. If you gain anything its a few nanoseconds we are talking about here.
For instance 1066MHz 5-5-5-18, is as fast as 800MHz 4-4-4-15
Also DDR2 1066MHz is usually overvolted 800MHz memory and thus will have a shorter and sometimes more unstable lifespan.
Furthermore if you use 4 sticks-o-ram on this board, your limited to 667MHz, otherwise your memorycontroller would be overflooded with too much data. -
What's the most stable browser for flash?
I play flash games and run several accounts at a time. I use Chrome at the moment, but have issues with it crashing 2+ times per day. What's the most stable browser platform for flash at the moment?
I have the latest updates and upgrades & a 15" MBP that should have plenty of power.Firefox or Safari, in my opinion. I prefer Firefox, use Safari occasionally, and just have never given Chrome a real chance. I don't like the 'built in' Flash and PDF technology in Chrome.
Give Firefox a try - lots of support for it.
Clinton -
Whats the most stable version?
What is the most stable version of iTunes for just playing music? I don't need anything else, bells or whistles. Always getting the beachball of death with 7.6 and I'm fed up.
thanks in advanceFWIW, I have 7.6.1 running on over 40 systems, most of which are G5s and one of which is my personal system at home and gets extensive use of iTunes, and have had no problems at all. So any problems you might be experiencing with iTunes 7.6 are not endemic to all installations of iTunes on G5s. Perhaps you have some third-party codec, add-on or plugin that might be affecting stability?
-
I have a MacBook Pro (15-inch, Late 2008), Intel Core 2 Duo 2.53 GHz, 4GB Memory. and am currently running Snow Leopard 10.6.8.
I would like to know which is the most stable upgrade for my model? Mountain Lion, Mavericks or Yosemite?
When I had gone to the apple care centre in India a few months ago to upgrade my OSX to Mountain Lion, I was told that considering my macbook pro's specs, upgrading it would just make it less efficient, and that I should stick to Snow Leopard unless I consider buying a newer mac that would benefit from it. Is this true? I find it a bit hard to believe. Which update is most recommended?
I also notice that my mac has gotten considerably slower. While using chrome, it buffers and struggles with even just 5 tabs open. Could this have something to do with my current ios? As a precaution, I have always been making sure I have enough free space on disk i.e around 70 - 100 free out of 250GB.
Any advice is appreciated.
Thanks in advance.Mavericks is no longer available from the App Store, so your choice is Yosemite. One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
Check to make sure your applications are compatible.
Application Compatibility
Applications Compatibility (2) -
What is most stable combination of OS 10.4 and FCP 6
I'm having dropped frame issues that I wasn't having before. I have changed no settings but did do a 'studio upgrade' using Software Update. Now I'm having the dropped frames.
Does anyone know what the most stable combination of versions of OS 10.4 and FCP 6 is?
my system: 17inch Macbook pro
2.4 GHz Intel Core 2 Duo
2 GB 667 MHz DDR2 SDRAM
Final Cut Studio 2
final cut 6.0.1Unless you know of a specific issue, I'd suggest going to 10.4.10. It will have the latest patches, bug fixes, security updates, etc...
Problems that occur after updates tend to be problems that were already there.
hth
Jeff -
WHAT IS MOST STABLE VERSION OF SNOW LEOPARD
I've just completed a clean install of OS X 10.6.3. My usual methods are to use Software Update to get the latest version of Snow Leopard and I had been using 10.6.7. However lately I have had to do the clean install partly because somewhere along the line I downloaded a Java Update that the permissions would never clear up in Disk Utility. This, I believe, along with a botched setup of Parallels v4.0, my business iMac machine was becoming quite unstable and slow. Note: some of my favored applications are pre 2005 versions running under Rosetta.
However lately I have had to do the clean install partly because somewhere along the line I downloaded a Java Update that the permissions would never clear up in Disk Utility.
We all get those. They are not errors, consequently they will never be "repaired." It just means Apple hasn't updated the Permissions database.
The question should not be which version is the most stable, rather, which version is compatible with third party apps you must have and don't want to lose. As OS updates progress, PPC apps, especially, running under Rosetta, may lose some of their functionality. Updating is important in order to get the latest security patches. So, it's a possible tradeoff.
Here are my Java Permissions that won't be repaired. I think I made this screenshot for 10.6.4 or 5 and many more have been added since. -
I am having trouble downloading an extension for flash, despite having the most up to date flash version for Adobe Manager Extension CC. What would cause this to happen? It says I need to have flash 7 or higher. I have the most update flash available according to my browsers.
If you are using Flash Pro CC 2014, please update Extension Manager CC to 7.2.1. Then please confirm whether Flash is shown in the product panel of Extension Manager CC. If not, please refer to Re: Why can't I see InDesign CC in my Extension Manager CC.
-
Noticed at about noon that no emails had been received all day. Began to investigate and found that the MS Exchange Transport service had been set to deny email submission because it was using too much memory on the server (91%).
The error message makes me think that we may have been getting used by malware or something similar.“The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the
configured threshold.”
There are also several warning messages that list particular IP addresses and say that a connection from that IP was denied because there were already the maximum number of connections (20).
From what I can tell, all of the IP addresses are from Taiwan.
The time period for which some emails may be missing is from close of business yesterday ( 4/3/2014) through about 12:45 today (4/4/2014).
From the time I spent reading and trying to figure out the error, I think we may need to readjust our throttling policies to prevent this from happening.
The exchange server is currently running at 90%+ CPU and 50%+ memory usage the majority of the time, and I’m not sure how to fix it.
Also, I cannot get into EMS I get a access denied message from the destination computer. (Exchange server) I want to get into there to change the throttling policy back to default, since we disabled it.
The Error reads:
The WinRM client cannot process the request. The WinRM client tried to use Kerberos authentication mechanism, but the destination computer <Exchange> returned an 'access denied' error. Change the configuration to allow Kerberos authentication
mechanism to be used or specify one of the authentication mechanism supported by the server. (How do I do this?) To use Kerberos, specify the local computer name as the remote destination. (I'm trying to use EMS while logged into the local Exchange server)
Also verify that the client computer and the destination computer are joined to a domain. (Exchange is on our domain, and the computer trying to connect is the same computer) To use basic, specify the local computer name as the remote destination, specify
Basic authentication and provide user mane and password. Possible authentication mechanisms reported by server.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
I assumed control of this exchange system already in place and I do not have much experience with exchange 2013 or server 2012. I do know 2008, but that doesn't help very much in this situation.
Recent changes to the system:
About three days ago we switch our sessions policy to allow many more connections, and I believe this caused the issue. This is what I changed it to:
Made the registry DWORD (32-bit) "Maximum Allowed Sessions Per User" and modified the value to 1000. Location of registry change @ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
I just changed it to 10 from the 1000. I'm hoping this solves this. So far no.
Also, I am not the best in the shell or command line interfaces. Any help would be wonderful!Hi,
Yes, could be hardware performance issue. Try recycle the Transport process and see if the issue persists.
Thanks,
Simon Wu
TechNet Community Support -
I encountered this problem on our SQL2012 and I have tried different scenarios (see below) to no avail. I have decided to give up and check if someone here has encountered this and resolved it.
One thing I know, it's not a memory issue. Both servers we're using has lots of memory to spare and we monitor the memory as the replication goes through it's steps.
I hope someone can help me on this. Thanks!
The Error:
The merge process could not allocate memory for an operation; your system may be running low on virtual memory. Restart the Merge Agent.
Our Scenario
We're using SQL Server 2012 SP1. All subscriptions are pull based.
We're using direct Merge Replication (not FTP or web sync)
We already have 10 active replications with larger databases. Only 1 has this issue.
Database size is less than 5 GB
Rebuilding the publisher is not an option.
What have I tried?
There is no memory problem --- we have lots to spare
I have tried re-initialization of the database. Same problem.
I tried deleting the database and reinitializing it. Same problem
New snapshot. Same problem.
I tried changing the subscriber server but still same issue.
MCP, MCSD, MCDBA (ANXA)Here is the result for the sp_configure on our subscriber. We're doing a pull on the server with the issue.
name
minimum
maximum
config_value
run_value
max server memory (MB)
128
2147483647
2147483647
2147483647
In addition, I made a comparison between the working servers and the one with the issue -- there seems to be a difference in the service pack. Publisher has none but the subscriber is operating on SP1. But still strange as only 1 database is affected.
MCP, MCSD, MCDBA (ANXA) -
I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
Check, if you have the "Primary Only" option enabled. Then keywords will only be applied to the "Primary Image":
See: Keywords or ratings are applied only to one of the selected images - why?
Uncheck the little square button with the "1". -
How to I find out the most recent deductions to my account from the app store (say, for a recent download for additional functionality on a iPad game). Much as I try, I can't seem to get to see my account in enough detail to see what I have spent downloading apps to the ipad.
You need to punch in the passcode for any purchase right, not just for new apps??
If one of the other students, or anyone else, got access to your iTunes Store account, necessary to make any purchases, then they'd have all the information they'd need to also make in-app purchases. But an in-app purchase can only be made through the account through which the original app was purchased. Either your son bought the game (free or paid) and then shared it with someone else along with the account information (necessary to authorize the app on someone else's device), or someone else downloaded the game as well, not just made in-app purchases.
In any case, changing your iTunes Store password should now have cut off any such unauthorized activity, though of course if your son gives the new password out, you'll be back to square one.
Regards. -
case number 0123115765 ser no <serial numbers removed> send me the download of the mac version please. You are the most troublesome to make a change did the same with Norton they handled it over the computer without any fuss!!! Regards answer via email what to do! Regards Bo
Call Apple to get the replacement DVD > http://support.apple.com/kb/HE57 When you have the DVD, insert it and install iPhoto. Finally, open > Software Update and install the most recent version
-
How to make the tree sibling nodes sorting in memory per the VO default?
Hi,
I have a question on the uncommitted tree nodes sorting. The tree was built using the same VO with the view link to itself (parent/child relation). I have defined a default sorting on my VO. Now if I insert a node to the tree, the sibling nodes may not sort correctly if it is not committed. I tried to insert it to the RowsetIterator at the right position, it seems OK. but when you right click or something that make the tree to refresh, the order will mess up. If I do an auto save after each action, everything looks OK. But the fusion pattern is to do a global save, I have to manipulate the tree with the uncommitted data. I know I can set the view object's SQL mode to do the in-memory sorting. But not sure if it works on the tree structure, because it is not a single RowsetIteroator.. Can someone give an advice? Many thanks.
Edited by: user736572 on Jan 20, 2012 2:48 PMThanks Sudipto for trying to help. I did try that, and as I mentioned in the previous posting, it doesn't work for the tree nodes (multiple RowSetIterator). the following is my code, where the treeVO is the vo instance for the firstLevel tree nodes and it has view link to its children. I am not sure how to sort all children for each level. Even for the first level where I did the explicit sorting in memory, it still not sorting at all.
treeVO.setSortBy("code");
treeVO.setQueryMode(ViewObject.QUERY_MODE_SCAN_ENTITY_ROWS|ViewObject..QUERY_MODE_SCAN_DATABASE_TABLES);
treeVO.executeQuery(); -
i know my e-mail address and the password, but what website do I go to to check for the e-mail. I have a older laptop and my iTunes is 9.1.1 or something and Apple 10.4.11 so how do I do this. Thanks.
i know my e-mail address and the password, but what website do I go to to check for the e-mail. I have a older laptop and my iTunes is 9.1.1 or something and Apple 10.4.11 so how do I do this. Thanks.
Maybe you are looking for
-
How to use DirConnection.search with C#
Hi folks, I have to use C# for autmating a process with Acrobat. As a part of that I need to search in a Directory-Object using the search-Method of the DirConnection-Class. My problem: I cannot manage to set up the parameters for that method call an
-
How to access my five free hosted sites?
I am a creative cloud member and have created a site in lightroom, how do I access my five free hosted sites?
-
How to create a 2-color job in PageMaker?
how to create a 2-color job in PageMaker?
-
Help in comparing e-learning to Brainshark?
I am a newish user of RoboHelp, have not tried Captivate as yet. My colleague would like to use BrainShark as an E-Learning tool. The company has purchased RoboHelp already and we would like to use that for E-Learning as well as documentation. Could
-
HI I hv macbook pro 13 inch early 2011 with having maverick osx but it been booting slow since month or two, i already hv backup of entire hdd, pls suggest me I want to format hdd and reinstall same osx but i dnt have osx disc to install(i didnt get