What the use of allowance grouping

Hi Guys,
What the real use of allowance grouping with model wage type(except percentage valuation)
What the real use of reimbursement,allowance & perks in Payroll( except per

Hello Surajit,
You associate the eligibility criteria for a salary braket to a Wage Type and specify the type of allowance. These Wage Types are read by the Basic Pay Infotype (0008) and processed as per the criteria applicable for the employee's 'Pay Scale Grouping for Allowances'.
so RAP - checks eligibility and calculation of wage type
I spoke to one guy , he said real payroll starts with RAP.
Thanks and Regards
Jaydeep Jadhav

Similar Messages

Whats the use of sap queries

whats the use of sap queries

Hi,
http://www.sap-img.com/abap/what-is-sap-queries.htm
http://www.informit.com/articles/article.asp?p=664660&rl=1
def sap query
http://help.sap.com/saphelp_bw21c/helpdata/en/f1/0a5625e09411d2acb90000e829fbfe/content.htm
In HR
You can use SAP Query in HR to report on HR data.
how to create sap query
http://help.sap.com/saphelp_46c/helpdata/EN/d2/cb4145455611d189710000e8322d00/content.htm
for maintain SAP query in HR
http://help.sap.com/saphelp_46c/helpdata/EN/d2/cb42cb455611d189710000e8322d00/content.htm
http://help.sap.com/saphelp_46c/helpdata/EN/d2/cb455f455611d189710000e8322d00/content.htm
If you want to create InfoSets for HR, you can use logical databases PNP, PAP, and PCH . The database you must use to create your InfoSet depends on the component in which the data you want to report on is stored.
Creating InfoSets
The maintenance procedure for HR InfoSets differs from the procedure described so far in this section inasmuch as HR data fields are grouped together in infotypes. To set up an InfoSet for the HR application, proceed as follows:
   1. On the initial screen for maintaining InfoSets, enter a name for the InfoSet and choose Create.
   2. On the next screen, enter a name for the InfoSet and select one of the HR logical databases in accordance with your reporting requirements.
Customer infotypes can be created on all HR logical databases. In each individual case, therefore, you must decide which database to select so that you can report on customer infotypes.
This screen enables you to enter an authorization group. All of the queries that are subsequently created using this InfoSet can only be executed by persons who have this authorization group.
   3. Choose .
This takes you to the Infotype Selection for InfoSet screen. You now have the option of creating field groups and assigning fields as required for non-HR InfoSets. Field groups that correspond to infotypes and already contain fields, however, are always created for HR InfoSets. The field groups are displayed in an overview tree in the top right section of the screen.
The infotypes that you included in the InfoSet are displayed in an overview tree on the left of the screen. The infotype fields that are already included in field groups are displayed in a different color, and the field group ID is displayed.
In the standard system, a field group is created automatically for each infotype that you included in the InfoSet (a field group corresponds to an infotype).
In the standard system, each field group contains the infotype-specific fields. To ensure that working with the InfoSet is as easy as possible, you are advised to restrict your use of fields in each field group to those you really require. This means you should remove fields that are not required.
An infotype's fields must only be assigned to the pertinent field group. Make sure this assignment is correct. If the assignment is incorrect, the InfoSet could be rendered unusable.
When an InfoSet is created, the following fields are transferred automatically to the first field group:
Logical database PNP Personnel number
Logical database PAP Applicant number
Logical database PCH Object ID, plan version, and object type
   6. Determine the fields that must be included in the field groups of your InfoSet. If you require further information, see
      Assigning Fields to a Field Group.
If you want, you can change the default sequence of field groups and fields as required using drag & drop.
   7. To save the InfoSet, choose .
   8. To generate the InfoSet, choose .
      On the Change InfoSet (InfoSet name) screen, you can choose Edit ® Change infotype selection to add more infotypes to the InfoSet, or to remove infotypes from the InfoSet. Remember to regenerate the InfoSet afterwards.
      This screen also enables you to update InfoSets if, for example, the system contains new additional fields for specific key values. To do so, choose InfoSet ® Additional functions ® Update additional HR fields.
   9. Go back to the initial screen for InfoSet maintenance.
10. Choose User group assignment.
11. Select a user group, and save your entry.
Please reward points.

HOw to create a Batch file for java application and whats the use of this ?

HI,
How to create a Batch file for java application ?
And whats the use of creating batch file ?
Thanks in advance

First of all, you're OT.
Second, you can find this everywhere in the net.
If you got a manifest declaring main class (an classpath if needed), just create a file named whatever.bat, within same directory of jar file, containing:
javaw -jar ./WhateverTheNameOfYourJarIs.jar %*By the way, assuming a Windows OS, you can just double click the jar file (no batch is needed).
Otherwise use:
javaw -cp listOfJarsAndDirectoriesSeparedBySemiColon country/company/application/package/className %*Where 'country/company/application/package/' just stands for a package path using '/' as separator instead of '.'
Don't specify the .class extension.
Javaw only works on Windows (you asked for batch, I assumed .BAT, no .sh), in Linux please use java.exe (path may be needed, Windows doesn't need it 'cause java's executables are copied to system32 folder in order to be always available, see PATH environment variable if you don't know what I'm talking about) and use ':' as classpath (cp) separator.
The '%***' tail is there in order to pass all parameters, it only works on Windows, refer to your shell docs for other OSs (something like $* may work).
This way you have a command you can call to launch your code (instead of opening NetBeans just to see your app working). You could schedule tasks on it or just call it in any command prompt (hope you know what it is 'cause there have been people in this very same forum with no clue about it, if not just hold the 'Windows button' and press 'R', then type 'cmd' and run it).
Finally add dukes and give 'hem away.
Bye.

Whats the use of 'Maximum Councurrency' in File Receiver adapter?

Hi All,
Whats the use of 'Maximum Councurrency' in File Receiver adapter?
Xier

Hello,
Refer the below thread and check it out my reply . I gave for JDBC adapter, but the concept is same for File/JDBC.
Re: JDBC Adapter - One Connection prior to SP20
Best regards,
raj.

What is use of Trasnport Group in STMS

Hi Experts
What is use of Transport Group in STMS,
Regards
Dhrish

Hi Dhirish,
Transport groups is basically where all R/3 systems that access a common transport directory.
It's something like that you want to move a transport request from DEV to 5 clients in QAS where your transport groups help.
With reference to structure and details you can find more details with below url.
http://help.sap.com/saphelp_46c/helpdata/en/c4/6045377b52253de10000009b38f889/frameset.htm
Regards,
Deepanshu Sharma

Whats is table type ? whats the use of it in abap?

hi,
i am ahmed abap fresher,
i want to know what is table type and whats the use of it. at what point/situation we utilize this table type.

Hi Ahmed ,
Table is apart of data dictionary.
Table is a sort of container where we store data.
For eg. you want to store customer record in the database.Now you will store that customer record against specific fields of the applicable table.
You can create or see table by means of transaction code se11.
There are 3 typesof tables available in SAP ABAP:
1. Transparent table
2. Pool table
3. Cluster table.
Transparent Table:
A physical table definition in the database for the table definition which is stored in the ABAP Dictionary for transparent tables when the
table is activated. The table definition is translated from the ABAP
Dictionary to a definition of the particular database.
Pooled table:
Pooled tables can be used to store control data (e.g. screen sequences,
program parameters or temporary data). Several pooled tables can be
combined to form a table pool. The table pool corresponds to a physical
table on the database in which all the records of the allocated pooled
tables are stored.
Cluster table:
Cluster tables contain continuous text, for example, documentation.
Several cluster tables can be combined to form a table cluster. Several
logical lines of different tables are combined to form a physical record
in this table type. This permits object-by-object storage or
object-by-object access. In order to combine tables in clusters, at
least parts of the keys must agree. Several cluster tables are stored in
one corresponding table on the database.
See the documetation at:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/81/415d363640933fe10000009b38f839/frameset.htm
Reward if useful ...
Regards ,
Shankar GJ

Why interface property be default final whats the use of that

can anybody explain me
when i declared a variable inside the interface its always public static final.
why its static and final what the use of theat. its set of rule or it has any reason.

Sir,
You do not have much choice:
From the JLS (9.3):
"Every field declaration in the body of an interface is implicitly public, static, and final. It is permitted to redundantly specify any or all of these modifiers for such fields."
Note from this though that you do not have to explicitly declare a field in an interface as public / static / final if you dont want to - if you leave it out the field is implicitly declared with these attributes.
So you could wite:
public interface SirInterface {
public int HeIsActuallyPublicStaticFinal = 1;
}

WHATS THE USE OF TABLE STRIP CONTROL AND TABLE VIEW CONTROL

WHATS THE USE OF TABLE STRIP CONTROL AND TABLE VIEW CONTROL

Subhash,
You create and distribute a model in BD64. The details of that are stored in this tables.
A model gives you the details of the sender / receiving systems and what are the message types that are getting transferred between these systems.
Regarding the IDOC segments issue, can you explaing how are you triggering the IDOC and which message / idoc type you are dealing with.
Regards,
Ravi
Note :Please mark the helpful answers
Message was edited by: Ravikumar Allampallam

Whats the use of assigning price list to site

hi ,
Why we assign price list in site (wb01) merchandise category?is that price list the same which i assign in "assign pricing type/reference site to organisational levels" in sales price calculation.explain me whats the use of assigniing the price list in siter(wb01) merchandise category which we will find on the top screen inside the site master
regards
krish

Hi Krish
Price list are assigned to article through MC at site master, no where else we define price list with article. When you run WPMA to transfer article price to stores, system will look at assigned price list with MC at site master then transfer the price.
Price list assign at organisational level will help system to find which pricing procedure to be used and which store Net purchase price to be taken for calculation.
Best Regards
Swami

Whats the use of TC we16

Hi all
whats the use of TC we16 ?
K S GREWAL

Grewal,
This is the inbound testing tool for IDoc files. Enter the path and file name for the IDoc file and the File Port set up to bring it in. Make sure it matches the File Port used in the Partner Profile for your Partner and IDoc Message Type.
So I would recommend to run only in DEV.
---Satish

Whats the use of doget and dopost

hi
whats the use of doget and dopoast when same work can be done by sevice alone?
Message was edited by:
pooja_k_online

Try looking at the Tomcat implementation of HttpServlet.service() method. I have pasted it below, if you look at the service() method all it does is to check for the method and call the appropriate method. It is not recommended to override the service method. It is a good practice to only override the getXXX() methods.
protected void service(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException
String method = req.getMethod();
if(method.equals("GET"))
long lastModified = getLastModified(req);
if(lastModified == -1L)
doGet(req, resp);
} else
long ifModifiedSince = req.getDateHeader("If-Modified-Since");
if(ifModifiedSince < (lastModified / 1000L) * 1000L)
maybeSetLastModified(resp, lastModified);
doGet(req, resp);
} else
resp.setStatus(304);
} else
if(method.equals("HEAD"))
long lastModified = getLastModified(req);
maybeSetLastModified(resp, lastModified);
doHead(req, resp);
} else
if(method.equals("POST"))
doPost(req, resp);
else
if(method.equals("PUT"))
doPut(req, resp);
else
if(method.equals("DELETE"))
doDelete(req, resp);
else
if(method.equals("OPTIONS"))
doOptions(req, resp);
else
if(method.equals("TRACE"))
doTrace(req, resp);
} else
String errMsg = lStrings.getString("http.method_not_implemented");
Object errArgs[] = new Object[1];
errArgs[0] = method;
errMsg = MessageFormat.format(errMsg, errArgs);
resp.sendError(501, errMsg);
}

What the "use JSP presentation" check box does?

Can someone tell me what the "use JSP presentation" check box does? (can't find any documentation)
When I set "Implementation type" to "BPM Object Interactive Call' if a check "use JSP presentation" instead of "Use BPM Object Presentation" and I enter a JSP name can I cause the process to start a JSP ?

Hello,
The option is intended to use a JSP instead of a form for a BPM Object interactive call. This means that you have to prepare your custom JSP, add a special tag library provided by Fuego and "mark" your html tags deciding which of them will become the attributes for the instance of your BPM Object.
Whitin the page you can also call some methods of your objects.
Finally you can post back the data and automatically update your object in the process. There is no much documentation and it's even quite old. Take a look here: [http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/taglib/index.html]
The JSP will be shown as a normal interactive activity popup window. You can customize it as you like, even adding some client side script.
HTH
G

Whats the use of having pragma autonomous transaction

Hii All,
The below is the procedure developed by our predecessors.We are making use of this for writing our debug messages.
I'm aware of pragma autonomous transaction ,this allows my code to run independently of the calling program.
But here we are just using utl_File and we are neither using any DML(Inserting error messages into a table) or DDL statements in the below code.
What is real use of having pragma autonomous transaction.???This code is working in the same way even without the pragma...I dont' find any difference .
Please let me know the use of having pragma autonomous transaction in the below procedure and where it actually comes into usage.
Create or replace Procedure logmesg
p_file_name in varchar2,
p_mesg_text in varchar2,
p_dir_path in varchar2 default fn_get_debug_path,
p_file_ext in varchar2 default 'log',
p_append_flag in varchar2 default 'Y'
) Is
 pragma autonomous_transaction;
 l_utl_file utl_file.file_type;
 l_append_flag varchar2(1);
 l_mesg_text varchar2(32000);
 l_file_name varchar2(3000);
 l_dir_path varchar2(32000);
 l_delimeter_occurance number;
 l_buffer_str varchar2(32000);
Begin
 if trim(p_dir_path) is null then
 l_dir_path := fn_get_debug_path ;
 else
 l_dir_path := p_dir_path;
 end if;
 l_mesg_text := p_mesg_text;
 l_append_flag := nvl(p_append_flag,'Y');
 l_file_name := p_file_name||'_'||to_char(sysdate,'ddmmyyyyhh')||'.'||p_file_ext;
 l_append_flag := Case l_append_flag
 When 'Y' then 'a'
 When 'N' then 'w'
 End;--l_append_flag
 Begin
 l_utl_file := utl_file.fopen(l_dir_path,l_file_name,l_append_flag);
 Exception
 When Others Then
 l_utl_file := utl_file.fopen(l_dir_path,l_file_name,'w');
 End;
 if dbms_lob.getlength(l_mesg_text) > 32000 then
 loop
 exit when dbms_lob.getlength(l_mesg_text) < 32000;
 l_delimeter_occurance := dbms_lob.instr(l_mesg_text,chr(32),1,1);
 l_buffer_str := dbms_lob.substr(l_mesg_text,l_delimeter_occurance-1);
 utl_file.put_line(l_utl_file,l_buffer_str);
 l_mesg_text := dbms_lob.substr(l_mesg_text,l_delimeter_occurance+1);
 utl_file.fflush(l_utl_file);
 end loop;
 end if;
 utl_file.put_line(l_utl_file,l_mesg_text);
 utl_file.fflush(l_utl_file);
 utl_file.fclose(l_utl_file);
End logmesg;
/Here

Please let me know the use of having pragma autonomous transaction in the below procedure and where it actually comes into usage.Seems it is redundant in that procedure, and doesn't add any value, since the procedure isn't doing anything 'transactional'.
I would remove it.

What is ABAP/JAVA Proxy and whats the use of it?

Hello All,
What is ABAP/JAVA Proxy. And why do we need to use them? I am not sure of the definitions given on help.sap.com. Thats the reason I am posting this question. Right answer will be rewarded. Thanks in advance.
Regards,
Farooq.

HI Farooq
ABAP Proxy
ABAP server proxy is created for the inbound interface creted in XI's Integration repository proxy should be created in the business system for which the interface is created .
U can reference following link :
http://help.sap.com/saphelp_nw2004s/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm
Server Proxies are generated for Inbound Message Interfaces. These are used to Process the Data coming into SAP System from an external application.
Sproxy is the transaction to generate Proxies.
Plz refer to this blog on abap server proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Java Proxy
Java Proxoies are used to allows your java Applications ( j2ee, j2se applications )to interact directly to the Integration Server of XI without any special adapters.
All documents are available on SDN itself .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7d4db211-0d01-0010-1e8e-9b07fc2113ab - How To Work with XI 3.0 Java Proxies
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9- Java Proxies and SAP XI - The Inside Story, Part 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d - Java Proxies and SAP XI - The Inside Story, Part 2
Proxies help you achieve non-standard functionality for which the out of box XI adapters do not suffice. Just to give you an example, consider a system with which XI has to integrate , the only interface the system offers is a TCP / IP socket based interface. You could write a Java proxy which would interact over sockets with your target system, which is not possible with other standard adapters which are shipped with your XI installation
You can refer demo on SDN TV, on this link
https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/110ff05d-0501-0010-a19d-958247c9f798 [original link is broken]
Cheers..
Vasu
** Reward Points if found useful **

Whats the use of definig the task assignment ....

I ve a question that what is the need of assigning the possible agent again after v assigned the agent in the agent type...
Really for a task , first i assigned the USER , then what i did is assigned a possible agent by clicking the agent assignment icon in the task properties tab and then i checked the check box for GENERAL FORWARDING ALLOWED, assigned the agent type by clicking the create agent assignment icon ..i
choosing the user....and i mention an existing user there
then i test run the workflow passing the instance ...but the workitem is not getting into anyones in box.... can anyone explain the usage of that and what happened on what i did....
thanku...

I am not sure if I got it correctly:
1. You have assigned a particular user as an agent for a workflow step (he should become an agent at runtime).
2. As possible agent assignment you have chosen 'General forwarding not allowed' checkbox.
If that's the case, the possible agent assignment is still missing. I.e. whoever receives the workitem can forward it to anybody, but noone can receive it.
You have two options:
1. Declare a task as a general task.
2. Maintain the possible agent assignment: assign at least your user as a possible agent.
In this scenario I would opt for 1.
And to answer the question what is the use I would give some examples:
1. You assign particular agents to the WF step. You declare a task as general task.
This is most commonly used. Works as described above.
2. You don't make an assignment at the WF step level. You declare limited number of possible agents for a task.
Merely used. All possible agents will receive a task. Can they forward? This depends on the settings of a task (forwarding allowed).
3. You assign particular agent to the WF step. You declare possible agents (e.g. by assigning a PFCG role). You declare, that general forwarding is not allowed.
Appropriate agent will receive a task and he will not be able to forward it to somebody who is not authorised.
Some other combinations are possible, but not always make sense.
Regards,
Michal

What the use of allowance grouping

Similar Messages

Maybe you are looking for