What title do you want/

Who can I complain to about adobe service?

Nobody. Just get over it. We all know that it sucks on the best of days.
Mylenium

Similar Messages

What Function/Features you want to have in next Sun Studio release?

Hello,
My name is Ngoc Nguyen, from Sun Studio product team. We just shipped Sun Studio 12 ML release (for C, C++, Fortran compiler) past few weeks. We start working on the next release. This is the right time for the community to tell us what feature you want to change or add into next release.
HOW?
Please use the following instruction. It seems long at start, but both you and Sun will get benefit from it on the long run. i.e: By this way, All of your suggestion/request will be logged into our worldwide database system and is assigned an Request for Enhancement (*RFE*) ID. Later You can view the progress of your suggestion/request by using this RFE ID.
- Go to http://bugreport.sun.com/bugreport/
Check the box at the bottom of the page
Click on "Start a new Report"
- Select the following
Type = Request for Enhancement
Product/Category = C/C++/Fortran Compilers and Tools - Misc
Subcategory = C/C++/Fortran Compilers and Tools - Misc
Release = Other
Operating System = <your choice>
- Click on "Continue"
- On the next screen, you only need to fill out the required fields indicated by *.
- The "Synopsis" field should be start with "VOC" word. VOC stands for "Voice of Customer". i.e: "VOC: I want to increase performance on xxxxx component".
- The "Justification" field is important too. general statement like "It is important for us" may not look attractive.
- After all, click on "Submit"
This input collection process will last 10 days and will be ended on Wed Oct/31st.
Looking forward to hear from you.
Best Regards,
Ngoc Nguyen
IMPORTANT: Please don't post your suggestion/request on this forum thread because nobody will help you to log your suggestion into Sun System. Please use the method I outlined above.

Hello,
My name is Ngoc Nguyen, from Sun Studio product team. We just shipped Sun Studio 12 ML release (for C, C++, Fortran compiler) past few weeks. We start working on the next release. This is the right time for the community to tell us what feature you want to change or add into next release.
HOW?
Please use the following instruction. It seems long at start, but both you and Sun will get benefit from it on the long run. i.e: By this way, All of your suggestion/request will be logged into our worldwide database system and is assigned an Request for Enhancement (*RFE*) ID. Later You can view the progress of your suggestion/request by using this RFE ID.
- Go to http://bugreport.sun.com/bugreport/
Check the box at the bottom of the page
Click on "Start a new Report"
- Select the following
Type = Request for Enhancement
Product/Category = C/C++/Fortran Compilers and Tools - Misc
Subcategory = C/C++/Fortran Compilers and Tools - Misc
Release = Other
Operating System = <your choice>
- Click on "Continue"
- On the next screen, you only need to fill out the required fields indicated by *.
- The "Synopsis" field should be start with "VOC" word. VOC stands for "Voice of Customer". i.e: "VOC: I want to increase performance on xxxxx component".
- The "Justification" field is important too. general statement like "It is important for us" may not look attractive.
- After all, click on "Submit"
This input collection process will last 10 days and will be ended on Wed Oct/31st.
Looking forward to hear from you.
Best Regards,
Ngoc Nguyen
IMPORTANT: Please don't post your suggestion/request on this forum thread because nobody will help you to log your suggestion into Sun System. Please use the method I outlined above.

Add-On PKG Applications Available - What Applications Do You Want (Wishlist)

Today we have multiple applications that run directly on the Smart Storage devices and can be installed via in the simple PKG process. These are wide ranging applications that help with asset management, content management, e-commerce, web publishing (bulletin boards, wikis, etc), & e-learning systems.
Beyond what is is available now, what applications would you like to see? We'd love to hear what you'd like to see.
Applications Available Now (version numbers)
GLPI (0.72.4)
Joomla (1.5.15)
Magento (1.4.1.1)
MediaWiki (1.16.0)
Moodle (1.9.9)
Open Web Analytics (1.3.1)
phpBB (3.0.7)
Python (2.5.2)
To Download Add-on PKG Applications:
Follow this link to the software center
Select Network Attached Storage
Select Small Business NSS 300 Series Smart Storage
Select your model (NSS322, NSS324, NSS326 Smart Storage)
Select Smart Storage Application Software
Select the version number for the appropriate application
Click Download Now
Release Notes for all the available for all applications
Support for free add-on PKG applications is through online community forums.

OK, I've got Squeezeserver running now. For anyone interested, most files are automatically installed under /opt/share/squeezecenter, which seems fine. I had to move the files/directories that Optware installed under /home/slimserver to /opt/share/slimserver and edit /opt/etc/squeezecenter.conf to change the references from /home/slimserver to /opt/share/slimserver.
That allowed Squeezecenter to be started and retained all the runtime files across the NAS restart.
Then I had problems getting it to autostart after the NAS boots. I tried the example under the Cisco tech note about 'add your own entries to crontab', to create an autorun.sh script to issue the start command, but could not get it to work.
Then I found this link http://wiki.qnap.com/wiki/Install_Optware_IPKG and pretty much followed the instructions in the 'Running /opt/etc/init.d/* on startup' section. I'm no Linux expert, but I managed to get it working, without necessarily fully understanding it!
So finally Squeezecenter is running and autostarts - but hopefully Cisco will release an official add on in the near future.
Let me know if anyone wants amore detailed description.

What info do you want about Java i18n?

Although this forum is an excellent resource for quick answers, it isn't always possible for participants to provide detailed solutions. Are there areas of Java i18n that you'd like to read more about, perhaps via a more lengthy technical article on the JDC? What are your suggestions?
Regards,
John O'Conner

This may not be what you consider i18n, but
I keep running into time zone problems, most
recently with a customer in Germany. It seems
that sometimes Java/Solaris picks up Daylight
Saving Time correctly and sometimes not. I have
duplicated the German machine's settings on
my machine here in California, but it works correctly
for me. We are using the same JDK exactly. The
machines are not identical otherwise - the customer
has a newer, more powerful Sun.
A discussion of what needs to be done to get time
zones to work consistently and correctly would be
extremely valuable. Could it be a certain level of
JDK (we use 1.3)? Some combination of Solaris
patches? Environment variables to set? I can
set a GMT offset explicitly, but we don't want customers
to have to manually change this twice a year.
By the way, see bug 4177450, which was closed 3
years ago. Users on this forum are still reporting
similar trouble. If this is due to user error rather than
a bug, it's certainly worth a good description of how
to do it correctly.

What Reports would YOU want?

Hi All,
Just wondering - is there any interest from anybody in seeing the reporting capabilities of BI if BI and GTS are connected?
What type of reports would you all like to see?
Thanks!
Doug

Hi All,
Just wondering - is there any interest from anybody in seeing the reporting capabilities of BI if BI and GTS are connected?
What type of reports would you all like to see?
Thanks!
Doug

What details do you want to see in IT job postings?

Salary / Wages even if only a range.
Why make us ask and waste our time and theirs.....? *pet peeve*

We're hard at work trying to make our job postings site a quality experience!
What are some of the details you prefer to see about a job when you read a description?
We can relay your responses to recruiters who post roles on the community jobs site to save you time when sifting through them.
This topic first appeared in the Spiceworks Community

We're now well into 2015! What features would you want to see added in Eloqua 10 this year?

Calling the Topliners community! Please add your "wish list" features to this thread below. To get this started, here are my Top 5 feature requests. Some of these were lost in the cutover from E9, I know they are lurking in there somewhere!
1. Bring back the ability to create new Profile Fields for Query Strings (utm_campaign, utm_medium, etc.)
2. Bring back the old E9 Reports. Make Insight available, but add an interface to the E9 report console so we can choose which reports to use.
3. Bring back the ability to add Profile Fields to Forms (e.g., IP address, Most Recent Search Keywords). So we can trigger conditional processing steps based on certain visitor profile field values.
4. A single global setting to make Eloqua a true "opt-in" database. New contacts would be unsubscribed when they are first created. This can be done as a workaround today, but it's messy.
5. Instant mobile rendering - get a quick snapshot of your Eloqua email and landing page rendered in different Android and IOS devices, without leaving Eloqua.
These would make my life so much better!

Eloqua actually has rolled out 2 of your "wishlist" items already
2. Bring back the old E9 Reports. Make Insight available, but add an interface to the E9 report console so we can choose which reports to use.
You should ask someone to turn on Power Tools for you. This way, you can still access the E9 reports you've built in the past. They've told us that we can't build new reports but I think I was able to do so still. If I remembered correctly, the E9 reporting for email metrics is different to the way E10 measures opens and clicks therefore the E9 email metrics reports does not match up to the E10 ones
5. Instant mobile rendering - get a quick snapshot of your Eloqua email and landing page rendered in different Android and IOS devices, without leaving Eloqua.
Eloqua emails can be previewed with Tablet View and Mobile view.
Hope this helps!
Eva

IMessage not working on iPad 1, says sign in, I click that and then it says what email do you want to use. When I try to change it, or click next, or even wait a few seconds it goes back to the sign in screen.

It keeps happening :(

Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Troubleshooting Messages http://support.apple.com/kb/TS2755
 Cheers, Tom

Hi I have signed up for apple chat and it accepts my password etc then a notice come up saying @what is the user name you want people to see' and it states my email addy with a tick beside it ..it isnt highlighted though so cant click on it..help..

Hi I am trying to set up chat on my Ipad...I have had email verified and got a pw etc//I sign in and it is accepted then I get a notice saying! What name do you want people to see you as..and it states my email addy which is ticked..then I press DONE and I just keep going back to the sign in screen any ideas please?

What application are you talking about?

HT204023 What do you do when the hotspot is on and you want it off

The phone cannot access Internet with the SIM card but I can access it through wi fi

Exactly what is it you want?
On the subject you state thet you want to turn off the phone's "personal hotspot" which is used for providing Internet connectivity for other devices by using the phone's connectivity thru the carrier's network. This is controlled thru Settings / Personal Hotspot (On/Off).
But in the body of your message you state you cannot connect thru your carrier (connecting after SIM card registration) and you connect thru Wi-Fi. Which in turn connects via Settings / Wi-Fi and you choose the access point, with possible authentication, on the following screen once the option is On.

HT1414 When I hit restore a file menu from my computer pops up and I am not sure what file to put in to get my iphone to restore from. I don't get the box that says are you sure you want to restore. So how do I get it to restore so I can see if this fix

I got a "new" iphone from the Apple store when my dog bit the phone and cracked the front. This new phone will not play any music, ie no sound will come out. I can watch videos with sounds but no music from any of my playlists. I checked with Apple and was told to try to restore my iphone. I did all the necessary prep work like backing up and syncing and then hit the restore button on the iTunes page. A file menu icon popped up with a blank in it and I do not know what file I need to put in the window as where it needs to find a file to restore the phone. I never got a message that said are you sure you want to restore the phone. I need some help if anyone knows how to do this or should I just go back to the Apple store (which is over an hour away)? Thanks

I am syncing my iphone to my iTunes account and then I do a backup and also making sure all updates are current. Then by going to the my phone and then going to the right and selecting the restore my iphone.
Here is a picture of what I get

Why each time I try to save my day's work,version WITH mark-ups and version w/o, does it say "you have placed a large amount of text on clipboard do you want to access this? What is clipboard and how can I just save my work in its proper file?

I don't get this clipboard thing! I have created two files, one for the MS with mark-ups, and one for the unmarred version, each living in their own spot in my "house." It seems to be merging the two versions and I have to go in and re-paste and then it always says "you have placed a large amount of text on clipboard do you want to be able to access this?" and it prompts me to say no but I am afraid I'll lose my day's work so I just tap cancel. I highlight the day's revision and select "copy" to paste into the unmarked doc. before I save on the marked up or working doc. It is when I try to close that one that the clipboard issue pops up. What can you tell be about saving doc. in two places and how to NOT get it on clipboard? Thanks! I am not super computer savvy so layperson's language much appreciated!

Are you using Microsoft word? Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users. I have seen this message from Microsoft word. It's annoying.
As BDaqua points out...
When you copy information via edit > copy, command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information. Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
You should be saving your work more than once a day. I'd save every 5 minutes. command + s does a save.
Robert

I keep getting reminder that I need to download the latest Flash Player after every email that I open or close. I have downloaded several times the update and it tells me that I already have this program do you want to replace it. So what is going on?

reminder for downloading the new version of flash player continues to happen. I have downloaded and installed it and I get an alert that it has already been installed and do you want to replace it. What is going on with this.

Hi Pilaar39, Please let me know if you are still having problems or have found a solution.
Thanks,
eidnolb

The latest version of Firefox no longer asks if you want to save open tabes for your next session..I HATE not having that option. What were they thinking?

Question
The latest version of Firefox no longer asks if you want to save open tabs for your next session..I HATE not having that option. What were they thinking? (I think this is self explanatory)

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time. 
There is also a "Restore Previous Session" button on the default about:home Home page. 
 
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

"Do you want to allow the following program from an unknown publisher to make changes to this computer?" I mean....what would you do? Is it safe to click yes....(Don Don Don...*sound effect*)..please help...

Okay everybody...so I'm on the struggle bus so I'm going from Photoshop cs6 off my old broken laptop to trying to dwn Photoshop Cs2...either way I love PS. Now when I tried downloading it for free from Adobe...succeeded...but when I went to the download folder to install it, it said "Do you want to allow the following program from an unknown publisher to make changes to this computer?" I mean....what would you do? Is it safe to click yes....(Don Don Don...*sound effect*)..please help...

If you already have a license for photoshop cs6, why do you want photoshop cs2?
You can just install photoshop cs6 on your new computer provided both operating systems are the same kind (both mac or both windows)
If you don't have an install dvd for cs6, you can download photoshop cs6 from here and use your serial:
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

What title do you want/

Similar Messages

Maybe you are looking for