What to be given in JDBC receiver comm channel?

Hi
I have given
JDBC driver:com.sap.aii.messaging.adapter.ModuleXMB2DB
Connection:jdbc:microsoft:sqlserver://sapep:1433;DatabaseName=SAPXI
am i giving correct params?
please help me where and how to check whether iam using correct params in my JDBC receiver comm channel.
Thanks

Hi Datta,
Check
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
/people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
Best regards, Maksim Rashchynski.

Similar Messages

What to specify in my JDBC receiver communication channel

Hi!
In my Receiver comm channel I have selected
Adapter Type:JDBC
Receiver
Transport protocol: JDBC 2.0
Message Protocol: XML SQL Format
Adapter Engine: Integration server
JDBC driver:??????
Connection: ??????
I dont have any idea as what to give here, How do i check which JDBC driver i am using? and also Connection parameters?
Help me
Thanks

Hi Datta,
Check
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
/people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
Best regards, Maksim Rashchynski.

JDBC Receiver Comm Channel Issue

Hi Team,
We have around 77 interfaces inserting/updating information into a database.
Q1) Should we creating 77 different receiver JDBC communication channels for the same receiver?
Q2) Or would a single JDBC communication channel suffice?
Currently, we have only created a single communication channel and we are encounter 'JDBC Message processing failed, due to Channel has reached maximum concurrency ' error.
The Maximum Concurrency is set to '1' for now.
Q3)How do we manipulate the 'Maximum Concurrency' value?
Please advice.
Thank you,
Rakesh.

RakeshDamera wrote:
Hi Team,
>
> We have around 77 interfaces inserting/updating information into a database.
>
> Q1) Should we creating 77 different receiver JDBC communication channels for the same receiver?
it can be handled by a single on also
> Q2) Or would a single JDBC communication channel suffice?
>
> Currently, we have only created a single communication channel and we are encounter 'JDBC Message processing failed, due to Channel has reached maximum concurrency ' error.
>
creating multiple channels allows the flexibility of manual start or stopping particular interface flows in some business scenarios. if it is a single CC then there is no flexibility. so it depends.
> The Maximum Concurrency is set to '1' for now.
>
> Q3)How do we manipulate the 'Maximum Concurrency' value?
>
> Please advice.
>
> Thank you,
> Rakesh.
try increasing the value from 1 to 99 or the maximum permissible value

Sync/Async - JMS receiver comm. channel not processing

I have a Sync/Async scenario (without bpm) in PI 7.11:
RFC -> PI -> JMS
whereby the JMS receiver comm. channel does not fully process the message.
More specifically, the RFC sender comm. channel gets a message in and passes the message to the JMS channel, but that JMS channel within the RWB comm. channel log only shows the entry:
- Message processing started
The odd twist to this is that when we bring the PI server down, then back up again, (or wait a period of time, still trying to determine this period) the FIRST message attempt does successfully get processed, i.e. the first message on that JMS receiver comm. channel RWB log shows as:
- Channel successfully processed the message: 08499236-387c-11e0-b002-000025bab2c2
- Stored the correlation ID 08499236-387c-11e0-b002-000025bab2c2 of the request JMS message: ID:c3e2d840d4d8d4f24040404040404040c754dc12d8b54ec6 correponding to the XI message: 08499236-387c-11e0-b002-000025bab2c2
- Message processing started
(but then because of an issue on the target system, no response comes back, so then we'll additionally get the log entry:
- Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: no message received
Any suggestions appreciated on what I can check here to try and figure this out. Possibly because the first message eventually errors out, it is stopping the other subsequent msgs from getting processed...
When I check the audit logs of a 'success' msg vs. a not-successful msg, the success msg has an entry (and subsequent entries) of:
14.02.2011 12:50:19 Information Transform: transforming the payload ...
14.02.2011 12:50:19 Information Transform: successfully transformed
14.02.2011 12:50:19 Information ROB: entering RequestOnewayBean
14.02.2011 12:50:19 Information ROB: forwarding the request message
14.02.2011 12:50:19 Information ROB: leaving RequestOnewayBean
14.02.2011 12:50:19 Information JMS Message was forwarded to the JMS provider succesfully."
14.02.2011 12:50:19 Information XMB Message as Binary was forwarded to the SAP XI JMS service succesfully.
14.02.2011 12:50:19 Information WRB: entering WaitResponseBean
14.02.2011 12:50:19 Information WRB: retrieving the message for 08499236-387c-11e0-b002-000025bab2c2 ...
wheras the non-success msg shows only:
14.02.2011 12:55:30 Information Transform: transforming the payload ...
14.02.2011 12:55:30 Information Transform: successfully transformed
14.02.2011 12:55:30 Information ROB: entering RequestOnewayBean
14.02.2011 12:55:30 Information ROB: forwarding the request message
14.02.2011 12:55:30 Information ROB: leaving RequestOnewayBean
So, we can see that the message is not "forwarded to the JMS provider..." in the non-success case.
And also the sxi_monitor shows these messages with a status of "Log version".
Keith

Hi Siddhesh - yes that was a while back and am trying to remember the resolution. I have implemented sync/async bridges (as well as async/sync bridges) successfully, so I don't mind checking your settings, particularly I am interested in the settings within the Module tab of the JMS receiver. I can then compare to mine if you'd like. Also if you can let me know what underlying queuing system in that target system (e.g. MQSeries?) that would be great.
Regards,
Keith

PI 7.3 receiver AAE idoc scenario-No receiver comm channel found in ICO

Hi,
I am working in PI 7.3 receiver AAE idoc scenario.When I try to configure Integrated Configuration(ICO),I am not able to see the receiver comm channel in receiver agreement.
What is the reason for this??I have configured the communication channel,but still its not shown in reciver agreement dropdown.
Please help.
Regards,
Sriparna

Hi Sriparna,
In PI 7.3 there is are two separate IDoc adapters: "standard" IDoc adapter and one that is dedicated for AAE (ICO). Make sure that you have used the right one - most probably not, which is why you cannot see the channel in the dropdown list.
Hope this helps,
Grzegorz

IDoc to File scenario... Receiver Comm Channel Error...

Hi Guru,
On the scenario IDoc to file, I'm encountering the ff error on my receiver comm channel (File Adapter)...
ttempt to access the 1 requested objects on 1 failed.
Detailed information:
com.sap.aii.ib.core.roa.RoaObjectAccessException:
Attempt to read object Adapter Metadata File | http://sap.com/xi/XI/System,
type AdapterMetaData from application REPOSITORY on
system REPOSITORY failed. Object does not exist. Detailed
informatio n: SWCV ID: << removed >>
does not exist in Enterprise Service Repository and
System Landscape Directory (ROA_MOA_NOTCOMPLETED)
<< removed >>
Attempt to access the 1 requested objects on 1 failed.
Detailed information:
com.sap.aii.ib.core.roa.RoaObjectAccessException:
Attempt to read object Adapter Metadata File | http://sap.com/xi/XI/System,
type AdapterMetaData from application REPOSITORY on
system REPOSITORY failed. Object does not exist. Detailed
informatio n: SWCV ID: e5a519a0766111dca2e8e95d0a115642
does not exist in Enterprise Service Repository and
System Landscape Directory (ROA_MOA_NOTCOMPLETED)
Attempt to access the 1 requested objects on 1 failed.
Detailed information:
com.sap.aii.ib.core.roa.RoaObjectAccessException:
Attempt to read object Adapter Metadata File | http://sap.com/xi/XI/System,
type AdapterMetaData from application REPOSITORY on
system REPOSITORY failed. Object does not exist. Detailed
informatio n: SWCV ID: e5a519a0766111dca2e8e95d0a115642
does not exist in Enterprise Service Repository and
System Landscape Directory (ROA_MOA_NOTCOMPLETED)
Please advise what possible solution can we apply?
Thanks.
Edited by: Rob Burbank on Dec 17, 2010 10:43 AM
Edited by: Rob Burbank on Jan 3, 2011 12:03 PM

Hi,
You can check File adapter metadata under Basis SWCV -->namespace http://sap.com/xi/XI/System in IR.
-Rahul

Error in receiver comm channel

Hi All,
   I am working on scenario file to file with out IR.just picking up the file from sap app server and placing in target ftp server.
My sender comm channel is picking the file fine but when in receiver comm channel i am getiing error as
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Unknown payload format 0 in message"
"Attempt to process file failed with Unknown payload format 0 in message"
i have checked in content of the file it contains no special character. are any security is being maintained.
please advise on this.
Thanks,
Bhaskar

Hi Jude,
I have checked in sender comm channel in message display tool under message content i am getting error as below.
messagecontent
message part [soap document]
500   Internal Server Error
SAP J2EE Engine/6.40
Application error occurred during request processing.
Details:   Error [javax.servlet.ServletException: null], with root cause [java.lang.NullPointerException: null].
Exception id: [00145E474044003F000018AD00003E0D000471A1CBF6A02A]
what would be the error and how can i find it.
Is this basis related issue?
Thanks,
Bhaskar

RFC , IDoc , XI and JDBC receiver communication channel--- Good Design

Hi Experts,
We have developed around 60+ interfaces on PI7.1 EHP1, in that 20 interfaces sending data to Data Base using JDBC receiver communication channel, 15 interfaces ABAP inbound proxy using XI adapter,10 Scenarios using IDoc receiver channel and 15 scenarios using RFC receiver channel.
But I have created only one IDoc, XI , JDBC and RFC channel.
Is it right idea/design or do I need to create more channels to handle multiple request.
Please share your thoughts on this.
Regards,
JAM

Hi,
For XI,RFC and Idoc when it's pointing to one SAP system you don't need any further comm channels.
For JDBC , if you are pointing to only one database you can use the same channel, if the target/databse changes you need more comm channels.
Your Design is as per the standards.
Regards,
Sainath Chutke

Regarding the JDBC Receiver Communication Channel error

Hi All,
While executing Jdbc to Jdbc interface, i am getting error in jdbc receiver communication channel. please see below message for error description..
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel 'JDBC_AccntStatements_Receiver', Service 'BS_BusinessSystem', Party '': JDBC Adapter configuration not activated
Note: the channel status is active and activated(not in change mode).
Any idea on this error.
thanks,
Madhusudhan.

Hi
According to your Error Message,
Saying that JDBC Configuration is not Active.
Once again cross check all the config is Activated & also Test your Config Using Config Test Tool in ID
And also check in RWB-Adapter Engine-Adapter monitoring ---select the option instaled & Started. whether the JDBC Adapter is working fine or not

Creating SOAP Receiver comm.channel for axis web service

Hi,
I created Soap Receiver comm. channel fro Axis web service like below:
*Target URL* : http://<IP>:<Port>/<x>/service
*User:* <user>
*Password :* <password>
*SOAP Action:* <target namespace>/method
when i drive PI Message that use Soap Receiver it get error below
I do same method for .Net web service, it runs properly.
How can i solve this problem?
Error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID B3004965647F340C997B5F2CC9EA7E22 Software Component 4CF44F80503211DEB2A0D3F40A194B29</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Mapping program is not available in runtime cache: Object ID B3004965647F340C997B5F2CC9EA7E22 Software Component 4CF44F80503211DEB2A0D3F40A194B29</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi,
I did all but nothing changed?
I have doubt about axis side. Because respose like below.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
May be Soap Receiver setting for axis web service must be different.
Thanks.

'Advance' tab finctionality in 'JDBC RECEIVER COMM. CH'

Dear Experts,
Please tell Me what is the functionality of 'MODULE' tab in receiver JDBC comm.channel.since i am getting the errorin 'Audit Log' as:
**08.08.2011 12:12:23 Error MP: Exception caught with cause java.lang.NullPointerException**
08.08.2011 12:12:23 Error Exception caught by adapter framework: null
08.08.2011 12:12:23 Error Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.NullPointerException.
when trying to connect to Non-Sap .(When i was doing Comm. ch testing)
Please,suggest.
Regards,
Raj

Hi spantaleoni,
Here we are connecting to oracle database.Even i cross checked my adapter multiple times(*there is no error).So,pleaase suggest me what is the functionality of 'advance' tab.
please find my adapter settings here: http://www.4shared.com/file/3w1kzJZR/JDBC_comm_ch_settings_advance_.html
Edited by: rasmiraj tripathy on Aug 8, 2011 11:17 AM

Erro in JMS receiver Comm Channel

Hi,
I am working on a scenario File(Sender) JMS (Receiver).The input is a text file The file sender polls this input file and the file sender CC does the content conversion and puts the XML message into the JMS Queue. But in the receiver JMS comm channel i get the error saying
Error sending message in sending to destination ABCF, the message message: TextMessage[null, <?xml version="1.0" encoding="...]: weblogic.jms.common.JMSException: Error sending mess
Please help me on this

Hi,
Please have a look at your message in SXMB_MONI and see if the payload is correct.
Also have a look at the MDT (http://<server>:<port>/MDT) and see what errors occur for your message.
Regards,
Yaghya

File2file-receiver-comm channel-incorrect ftp server

Hello,
The scenario is file (xml) to file (xml) to jumpstart the learning process.
config details:-
a) sender
ftp file "/xi_input.dat" from server 10.20.30.98
processing mode: "delete"
b) receiver
ftp file "/xi_output.dat" to server 10:20:30:98
file construction mode: "create"
Expected result:-
file at sender should be read by XI and deleted. Output file should be created by XI.
Acheived result:-
SXMB_MONI status is "processed successfully-(white black flag). XI read sender file "xi_input.dat" and it was deleted as requested in the config. But there was no output file "/xi_output.dat". Then chaged the FTP server at receiver to 10.20.30.98. This resulted in creation of /xi_output.dat
Question:-
Though I got the desired result, I was unable to find the error from SXMB_MONI by myself.
I could manage to debug and find the sequence of actions, here it goes:-
tointerfacename->service->channel->file adapter->ftp mode
but there is no trace about why /xi_output.dat is not created via ftp (due to typo error in server name).
Please look at the log and advise why SXMB_MONI didn't report this error? or point me how to debug better.
<SAP:ToInterfaceName>mi_name_in</SAP:ToInterfaceName>
<SAP:ToInterfaceNamespace>urn://file2file_2</SAP:ToInterfaceNamespace>
- <SAP:OutboundBindingAttributes>
<SAP:AdapterTypeData xmlns:SAP="http://sap.com/xi/XI/Message/30" />
</SAP:OutboundBindingAttributes>
- <SAP:HeaderMapping>
<SAP:FieldMapping xmlns:SAP="http://sap.com/xi/XI/Message/30" />
</SAP:HeaderMapping>
- <SAP:ChannelEntry version="30">
<SAP:PartyName xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:ServiceName xmlns:SAP="http://sap.com/xi/XI/Message/30">sevice</SAP:ServiceName>
<SAP:ChannelName xmlns:SAP="http://sap.com/xi/XI/Message/30">cc_in</SAP:ChannelName>
<SAP:AdapterName xmlns:SAP="http://sap.com/xi/XI/Message/30">File</SAP:AdapterName>
<SAP:AdapterNamespace xmlns:SAP="http://sap.com/xi/XI/Message/30">http://sap.com/xi/XI/System</SAP:AdapterNamespace>
<SAP:AdapterSWCV xmlns:SAP="http://sap.com/xi/XI/Message/30">3B787A8035C111D6BBE0EFE50A1145A5</SAP:AdapterSWCV>
<SAP:AdapterEngineType xmlns:SAP="http://sap.com/xi/XI/Message/30">AE</SAP:AdapterEngineType>
<SAP:AdapterEngineName xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:MessageProtocol xmlns:SAP="http://sap.com/xi/XI/Message/30">File</SAP:MessageProtocol>
<SAP:MessageProtocolVersion xmlns:SAP="http://sap.com/xi/XI/Message/30">3.0.0527</SAP:MessageProtocolVersion>
<SAP:TransportProtocol xmlns:SAP="http://sap.com/xi/XI/Message/30">FTP</SAP:TransportProtocol>
<SAP:TransportProtocolVersion xmlns:SAP="http://sap.com/xi/XI/Message/30" />

Thanks. The error is exactly what I was looking for.
In RTW->CC->log
Error Attempt to process file failed with Error occurred while connecting to the FTP server "10:20:40:92:21": java.net.UnknownHostException: 10:20:40:92
Now RTW still has red for receiver communication channel with the note
"In the Last 4 Hours Server 0 50_40103 Communication channel is correctly configured and started "
I performed stop and start to the communication channel it results in red status. However it is creating the file without problems.
Any way to make communicaton channel green?

Change CSV to Excel in the Receiver Comm Channel

Is there a way to insert custom code to change the FCC comma delimited (.csv) into an Excel file in the receiver communication channel file adapter? If so, how do I do this in XI? Thanks.

Kristine Tiongson wrote:
> GUI Mapping -> Adapter Module 1 that converts XML to CSV -> Adapter Module 2 that converts CSV to Excel -> File Adapter (FTP)
>
> Questions:
> 1. Is there a standard SAP XI adapter module that can do Module 1?
> 2. Is there a standard SAP XI adapter module that can do Module 2?
>
> Please give me more information about the modules because I haven't used them before. Thank you for all your help!
>
> Kristine
You flow should ideally be
GUI Mapping (XML) -> Adapter Module -> File adapter
Note modules are extensions to file adapter.
Ref:
How to create modules -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a
XI JAVA User Module Development using NWDI -
/people/community.user/blog/2007/12/21/xi-java-user-module-development-using-nwdi

Error in JDBC receiver Communication Channel

Hi,
I am facing a problem at receiver communication channel of JDBC adapter. I am gettting the error as,
"com.sap.aii.af.ra.ms.api.RecoverableException: Channel has reached maximum concurrency(5,000 concurrent Messages) and no free resourse found within 5,000 milliseconds; Increase the maximum Concurrency Level."
I am having the configuration on 4 different nodes. but suddenly only 1 out of 4 is working fine but remaining 3 are throwing this exception. It says to increase Maximum Concurrency level but i want to send only one message through one channel.
Is there a way to rectify this error. I am in deep trouble.
can anyone help me out in solving this issue, Its very greatfull if you do the needy.
Thanks,
Soorya,

Hello Aarthi,
I have gone through the link which you have provided for me in this regard. But i am not clear why those values,
AFW.Call.maxConsumers 10
AFW.Recv.maxConsumers 5
AFW.Rqst.maxConsumers 10
AFW.Send.maxConsumers 5
JDBC_http://sap.com/xi/XI/System.Call.maxConsumers 20
JDBC_http://sap.com/xi/XI/System.Recv.maxConsumers 10
JDBC_http://sap.com/xi/XI/System.Rqst.maxConsumers 20
JDBC_http://sap.com/xi/XI/System.Send.maxConsumers 10
These are concerned to MS only but not at JDBC adpater.
We have to look at JDBC prospective but not at the MS prospective.
So can you please look into the issue as JDBC adapter perspective.
Its like this that, there are 5000 messages are waiting for the free resource with in the next 5secs and as it is reached maximum concurrency of 1.
So my question here is,
Is there only one option to increase this value to 2 or more?
Or else do we have any other option to overcome this problem.
Please reply to this ASAP.
Thanks,
Soorya.

What to be given in JDBC receiver comm channel?

Similar Messages

Maybe you are looking for