What to do about a power supply for more than 2 hard drives in my G4 tower

There are bays for up to 4 hard drives on the floor of the G4, but I can only find plugs to get power to two hard drives. I already have a PCI IDE controller card so I can accommodate a number of drives, but I don't know where to get the power from. How are you supposed to power the other two hard drives? There's one spare power cable up where there could be a zip drive, but that won't reach down to the hard drive bays. Is there maybe an extension for that power supply?
Jason

Hi-
Look carefully inside of the tower.
There is another power lead with two power connectors to allow for four hard drives.
It may be curled up and tucked behind the fan shroud.
The power cable with two connectors for the optical drives is yet another power lead.
In total, there are three leads with six connectors.

Similar Messages

  • My Iphone rings but screen is blank held the power button for more than 10 sec but in vain

    My Iphone rings but screen is blank held the power button for more than 10 sec but in vain

    Hello waseem.abdul_hadi,
    It may be that your Screen Curtain has been activated. This can be deactivated by triple-tapping the screen with three fingers.
    Turn the screen curtain on or off. Triple-tap with three fingers. When the screen curtain is on, the screen contents are active even though the display is turned off.
    iPhone User Guide - Use iPhone with VoiceOver
    http://help.apple.com/iphone/7/
    Cheers,
    Allen

  • Is the 65W power supply killing small laptop hard drives?

    Apple is NOT shipping 45W power supply units to my country (Costa Rica) and the authorized resellers are selling 65W power supply units to PowerBook 12" and iBooks owners, saying that older and smaller laptops can use the 65W unit without problems.
    In 1 month, 3 of my friends have lost their powerbook 12" hard drives, all of them were using 65W units.... is it possible that the 65W unit is damaging the hard drive?
    Apple documents don't mention any kind of problem related to using the wrong power supply, but doesn't say it's ok either.

    Well the authorized resellers are the ones you should
    take this up with. If they won't listen, call
    AppleCare. Computers are particularly sensitive to
    power supply variations. Here is one article which
    the resellers should read:
    http://docs.info.apple.com/article.html?artnum=75448
    I actually printed that document and went to the store to show them they were selling the wrong adapter, but they said Apple is no longer sending/selling 45W adapters to them and they said also that Apple gave them a memo saying that 65W adapters cause no troubles to smaller laptops.
    As you can see in the article there's no warning about using wrong adapters.
    Hard drives shouldn't be affected by power supply
    variations, and given the fact the computer only
    takes as much power as it needs, you are more likely
    to have a problem putting a 45 W adapter in a 65 W
    unit than vice versa.
    Even so, your friends could have all lucked out and
    gotten a single bad batch sent to Costa Rica.
    Yeah, this is absolutely possible, but what are the chances that the three laptops using wrong adapters had hard drive problems?...
    I basically want to know if this is happening on other countries (the "no 45W adapters" thing) and if also the hard drive problem could be related to the 65W one.
    Regardless, what happened to their original adapters?
    One guy lost it on a trip to the beach; the cable that goes to the computer was broken on the other two.
    Thanks for taking time to write this answer!

  • Portable Power Supply for iPhone 3G

    Hi,
    I am looking to buy a portable USB power supply for my iPhone 3G.
    I will be flying next month, so I need something to provide additional power while I am in the air.
    I have searched around, and found:
    IGO® POWERXTENDER UNIVERSAL AA BATTERY-OPERATED CHARGER
    http://www.thesource.ca/estore/product.aspx?language=en-CA&catalog=Online&catego ry=iGo-HO&product=2739104
    IGO POWER TIP-A133 (adapter for iPod/iPhone)
    http://www.thesource.ca/estore/Product.aspx?language=en-CA&catalog=Online&catego ry=iGo-Tips&product=2739128
    I live in Canada (so I can't buy from places such as Amazon.com) and would like to keep the cost to a minimum (I don't fly all that often).
    I am wondering what people recommend for an affordable portable power supply, that accepts USB?
    Thanks for your time.
    - Brennan

    There is power lost when using these chargers. Loss due to current creating heat in the wiring, loss in the iPhone battery that is being charged due to resistance in the battery, and loss due to the semiconductor devices used to manage the charging process. Not all of your 1000 mAh "ends up" in the iPhone battery.
    I said "more than half" and that is literally true but a little pessimistic sounding. Maybe 70-80 percent. But I do not know. It will not be 87 percent. That's still good, to me.
    Here is a quote from the instruction sheet for my 1200 mAh Richardsolo battery:
    "If you have a 20-30% charge remaining in your iPhone, a fully-charged backup battery will bring the iPhone back to about a full charge. Once your iPhone is below 20% remaining battery charge, you may
    not quite get a complete recharge from the backup battery, but close."
    I find those percentages to be about right.
    Regarding Amazon review, I think that is true only for an iPhone that is only partly discharged, not completely discharged.

  • My ipod touch 4th generation no longer holds it's charge for more than 40mins,needs new internal battery but I have no idea how to go about this. i love my ipod and don't want it to loose power completely, can anyone help?

    My ipod touch 4th generation no longer holds it's charge for more than 40mins from full power, think it needs a new internal battery but have no idea how to go about this and am no longer covered by my guarantee. Can anyone advise me on what's best? Thanks in advance

    Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
    Use an Apple wall-mount charger.  Do NOT use a computer's USB port.  Then, operate it normally until auto shut-down (ignore any low level alerts that may appear).  An irony is that doing that test to determine the total operating time is also the exact procedure necessary to calibrate the battery level meter.
    I'm not claiming that you do not have a problem.  I am stating, however, that we don't yet know whether or not a battery problem exists.
    According to Apple:
    Use Your iPod Regularly
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

  • New Antec power supply for p7-1003w doesn't fit?!

    I got a new power supply for my p7-1003w tower only to discover it would not fit. It was getting caught somehow so I looked and noticed it was not the supply itself but the black plastic bezel piece around the AC connection hole.
    Has anyone else faced this? The original power supply doesn't have a bezel, but all the Antec supplys I see do. 
    If you've had this problem of the bezel beign too big what did you do bend your back plate? lol or is their a certian brand of supplys that don't have the big bezel around the connector hole.
    Thanks!
    Thomas

    Hi,
    Can you better describe the issue? See the below image:
    I saw a posting like yours here on the forum some time ago but I can't say if an Antec PSU was being used.  I typically recommend Corsair PSUs under 650 watts for the HP mid-tower chassis.
    Which model Antec did you buy?
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Hi, I need help. My iPad 2 won't start even if I already went through pressing the home and start buttons simultaneously. I also tried charging the battery for more than 30 minutes. Still won't power on. what should I do?

    My iPad 2 won't start even if I already went through pressing the home and start buttons simultaneously. I also tried charging the batteries for more than 30 minutes (done this procedure twice) but it won't still power on. What should I do next? Could it be a hardware issue then?

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Which power supply for k8n neo2 Platinum

    I need to buy a new power supply for my computer. With the ATX12V v2.2 standard and ATX12V 2.01 and the "no -5v on new psu's" issue I'm at a loss as to what to look for. I have looked and cannot find what "standard" (is that even the correct term?) the k8n neo2 supports.
    My main requirement is that the psu be 550-650 watts and have modular cables. I know someday I will have to upgrade my system to PCI-E and modern components, so I would like a PSU that would work now and in the future.
    Could someone point me in the right direction?
    Many thanks
    system spec's
    Motherboard- MSI K8N Neo2 Platinum
    CPU- AMD Athlon 64 X2 Dual core 4800 939 socket
    Memory-CORSAIR 2X1G Twinx2048
    Video- ATI HIS 4670 1GB AGP
    HD- Seagate 100 gb 7200 rpm
    Drives CD-DVD and CD-RW
    PSU- Ultra X Connect 500W ATX
    Sound- Creative SB Audigy2 Gamer
    OS- WinXP Home SP3 32 bit

     Why do you need 550-650W or is that just because of future needs? I would suggest one of the Corsair +12V single rail modular PSU's if you insist on the modular design. Check newegg for what they have for modular in the Corsair lineup. I'm sure you're aware that their price is considerably higher than the non-modular. K8 MB's that needed -5V are the early ones that had Creative Sound Blaster onboard audio.
     HX650
        *  Was: $139.99
        * $109.99
        * After $10.00 Rebate
        * $10.18 Shipping
     That's what it is now but if you don't need it in a big hurry you can probably wait a while and get for the same price but with free shipping.
     Edit: Gee, Ultra with blown caps, I just happen to have a xPRO 800W that blew some caps, repaired it and started going bad again and then got my TX650 to replace it. Got it for $70 after rebate (which I haven't received yet) by waiting for the right price, rebate and free shipping. VX550 would have been good enough but at the time I got the TX650 at a lower price.

  • Power Supply for multiple Graphics Cards

    I recently purchased an X1900 G5 Mac card. I now have my original (NVIDIA GEForce 6600LE) plus this new one. If I purchase yet another X1900, how do I get power to it? There is only one power jack on the mother board.
    What are my options? Can my power supply support more caards? How do I connect them to the power supply? ATI pointed me to Apple support

    Slot 1 (bottom) is the only slot designed for a high powered card. It is also the only 16 lane PCI-Express slot. The other slots have a power limit of 25 watts. Slot 3 is 8 lane, 2 and 4 are only 4 lane.
    <http://developer.apple.com/documentation/Hardware/Conceptual/HWtechPCI/Articles/pci_implementation.html#//apple_ref/doc/uid/TP40003937-DontLinkElem entID64>
    Put the 1900 in slot 1 (bottom), and the 6600 in slot 3. Even if there was enough power for a second 1900, it would not have the bus bandwidth because there is only one 16x slot.

  • Power Supply for G4 Dual 1.42 MDD

    I am needing a new power supply for my Dual 1.42 G4 MDD and need to know what models I can replace mine with.
    Thanks

    Hello! Try looking HERE. Tom

  • Where can I get a new power supply for my HP Pavillian 761C ?

    I can't believe how difficult it is to find HP parts.  The HP website is worthless for finding ant parts!   where do I go to find a new power supply for my HP Pavillian 761C ?

    Hi,
    Your PC has a 200 watt power suppy. Try this link.  The posted price is $9.94.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Where can I buy a replacement power supply for Optiplex 9020 Mini Tower?

    Where can I buy a replacement power supply for Optiplex 9020 Mini Tower?
    I don't see anywhere on Dell's website to purchase this.

    So far there is no replacement/upgrade PSU for Dell Optiplex 9020 MT from Dell.
    Will a dedicated power supply work for playing games? i bought this system as used (excellent condition) just for Gaming Purpose (GTA V), now i am stuck with the PSU issue. I can alter the case to fit the big size GPUs, but the issue is of PSU.
    Will ePower EP-450CD can help me in any way. 
    My main reason for changing PSU is to play my favorite game.
    Link to ePower ()
    or

  • POWER SUPPLY FOR MY CANON

    Hi there everyone
    I am looking forward to buy a power supply for my canon, do you know where I can find it or which one should I buy? Please recommend....thanks.

    Hi bebefle_89! Every model of camera uses a different power supply, so we will need to know the exact model of your camera to be able to answer that question accurately, but for EOS cameras you can get them here for PowerShot cameras you can get them here. 

  • I need a monitor power supply for HP2711X. Where can I buy one?

    I need a monitor power supply for HP2711X. Where can I buy one?
    This question was solved.
    View Solution.

    Because the XP597A3 (actually any of these product numbers; XP597AA, XP597A3, XP597AS) is a HP 2011x 20" LCD/LED widescreen monitor. The OP was looking for an A/C adapter power supply for the HP 2711x 27" LCD/LED widescreen monitor, which is product # XP600AA or XP600A3. The adapter power supply I linked to, is the correct part for the 2711x monitor.... that is why not those other parts.
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Power Supply for Airport Extreme

    Hi
    Does anyone know where I can get a new power supply for my airport extreme in the UK? Mine has died, and I don't really want to buy a whole new base station just because of the external supply. (I know the actual unit is working through plugging in a power supply from my other base station)
    I tried Apple, who weren't really any help.
    Thanks in advance!
    Tom.

    Tom welcome to the discussions.
    I would probably call the Apple number.
    1-800-MY APPLE
    I am sure that they can point you in the right direction.
    I am a little shocked that one of the Apple Retail stores can't offer you a Power Supply.
    If all else fails, it sounds like you have tried an alternitve, if it works use it, until you can get a replacment.
    Don

Maybe you are looking for

  • How do i get a movie to play on the internet on my tablet

    How do I get a movie to play in the internet on my tablet

  • New g/l-&  Extended Data Structure

    hi can anyone tell me how to Configured New GL and perform document splitting. what r the concepts for New GL in the areas of Extended Data Structure regards amulya Edited by: amulya chowdary on Jan 22, 2008 6:34 AM

  • Urgently required Good Installation Document for SAP Solution Manager 4.0

    Hello Experts, Iam implementing /installing SAP Solution Manager 4.0 in our scenario in a day/two. My query is tat do we need to install it APAP + JAVA based only or can we install it ABAP based only? Secondly i needed good self prepared document for

  • Pixelated text on ipad retina

    Hello, I have an iPad2 and an iPad with Retina display for testing my folios. I've just created a folio in horizontal format with the settings 1024x768 pixels as this is the only horizontal iPad format you can select in Indesign (as far as I know). N

  • Colors keep a changin'?

    Dearest Kuler, Just wondering why when you make changes to the numeric text entry fields withing kuler other colors values change. It is a little annoying when trying to establish a color scheme with strict RGB or CMYK values. Kuler is a great applic