What to do about email with no sender?

I get email with no sender on my iPad only (not on my computer and not in webmail).  There is no sender or no message, and it is dated 12/31/69. It will not delete.  My ipad inbox is filled with this stuff now and I don't know what to do about it. I get 2 or 3 a day.  Another post that I googled said they also had this but that it would delete.  Mine will not, and this is getting to be a major problem.
I don't think I can set up a rule on the iPad to stop it.  And, any rule that I set up on my iMac does not carry over to the iPad.

Janice Fisher wrote:
 After 12 Hours the ipad was only 75 percentPercent charged.  Not sure what that means except that I'll have to pay a small fortunennkn,njjjkk for a data sync cord. The long and inexpensive one doesn't work apparently.
I am not sure what you mean.
How are you recharging the iPad battery?
What do you mean by "data sync cord"? The USB cable supplied with every iPad? What "long and inexpensive one"?
Using the 10W USB power adapter, I can recharge my iPad's battery from 0% to 100% in just under 4 hours.
I am recharging the exhausted battery right now, and after 2 hours it has reached 64%.

Similar Messages

  • Emails with attachment send from and receive with XI

    Hi,..
    I have two questions regarding sending resp. sending mails from / to XI.
    A) is it possible to attach several files as attachment to mails sent via the mail adapter?
    Note: I do not want to send the message payload itself as attachment, but send an email with contents from the message payload and attach to this mail one or several files located at the disk as attachment?
    If , yes how can I achieve this.
    B) What happens with attached files, when the mail is sent to the XI mail adapter?
    Thanks in advance,
    Peter

    Hi
    >>A) is it possible to attach several files as attachment to mails sent via the mail adapter
    Yes it is possible ,go thru these blogs...
    https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
    /people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
    Hope it helps.
    Regards
    Arpit Seth

  • What causes all my emails with embedded media to always be downloaded with the media broken or removed? How do I solve it?

    Whenever people send me emails with embedded videos or pictures, the email always comes in without the media. It will have just the empty box outline where it supposed to be with a tiny broken page icon in the top left-hand corner.
    I can't seem to find the cause and the solution and this has been happening for a few years already. Does it have anything to do with my account still being POP and not IMAP? What are the possible reasons and their solutions? Please help, thank you.

    I am not an expert in this area, but I think I might know what is going on. There is a difference between an 'embedded' picture and an 'attached' picture.
    An embedded picture has a link to the actual picture. If the link is to a site which is not accessible (such as the sender's own computer) then you will get a broken link.
    An attached picture is the actual picture file (.jpg, etc.) so you can always view it. If you check 'Display Attachments Inline', then when you scroll down through the email, the attachments will show up.
    So, bottom line: If the sender embeds a picture, it needs to link to a publicly accessible URL. Otherwise, it needs to be attached.

  • Icloud receiving emails with NO Sender, No Subject

    Over the last few weeks my iCloud account has been displaying lots of messages with No Sender, No Subject in the header. The majority of these are automated email services like reservation acknowledgements etc. It is effecting all my devices that use iCloud.
    The same emails sent to my BT account and accessed by the same devices are fine.

    I have logged on to iCloud direct via vrowser and the messages are wrong on there. Below is an example of a message content:-
    --_004_2b2b2f4e7fd443b4956074a4e12b16a4AMSPR05MB097eurprd05pro_
    Content-Type: multipart/alternative;
    boundary=_000_2b2b2f4e7fd443b4956074a4e12b16a4AMSPR05MB097eurprd05pro_
    --_000_2b2b2f4e7fd443b4956074a4e12b16a4AMSPR05MB097eurprd05pro_
    Content-Transfer-Encoding: quoted-printable
    Content-Type: text/plain;
    charset=us-ascii
    THANK YOU TO ALL OF YOU THAT HAVE REGISTERED FOR SUNDAY - THOSE THAT HAVEN'=
    T JUST PING ME BACK!
    Thank you for supporting our show and we look forward to welcoming you agai=
    n - just a few little notes below - any qu's ping me back or see you bright=
    & early Sunday, don't forget the sunshine

  • Emails with no sender or message

    getting alot of emails with no message. just date and time. roadrunner says it is a spam issue. not sure how to fix this problem. I am getting regular emails that I can read. But most of my emails are blank. What should I do?

    Hi,
    Everything has a path. So with the message open go to View in the menu and select Message>Long Headers. That should show you the entire path of the email from start to finish. Forward that on to your ISP for them to initiate action.

  • How to block emails with specific sender name?

    I find some of the spam emails has a common sender name, but the sender email address is random. How to create an Outlook rule to block such emails? It seems Outlook rule can only blocks emails based on sender email address, not the sender name.
    Also is it possible to block emails based on its language, for example, I want to block all emails in Russian.

    Hi,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Possible to do? Write EMAIL with DELAYED sending time?

    In other words, I write an email now and have it send at 9:00AM so the user gets it a 9:00AM and it looks like I sent it at 9:00AM.
    Thanks.
    Its about a job that I would LOVE to get, hope to get, need to get, and is creative, wouldn't mind a few prayers for me too.
    Thanks and Peace!

    So no way to write an email, then set the time for delivery.
    e.g. I write something at night and want it delivered (emailed) at 9:30AM?
    I know you can do that via phone text, you would think this would be an easy script to write perhaps?

  • Email with attachment sends but Recipient does not always receive email

    Email sends with 1.7 MB pdf attachment but Recipient does not always receive, not consistent.
    Using OS X Yosemite, Apple email

    What version of CF are you using?
    The "enablecab" attribute was deprecated last century! Do not
    use it.
    Your cfform tag needs to be:
    <cfform action="tonysSendMailAction.cfm" method="POST"
    enctype="multipart/form-data">
    The "multipart" stuff primes the browser to send files.

  • How many Emails can you send at once with Apple Mail?

    I found out that road runner will allow me to send 1000 email in a 24 hour period. The question is, can I put 950 email addresses in the bcc and send it, or is it too many e mails at once. How many or what is the max emails you can send at once? Thanks

    Hi Gabriel38, and a warm welcome to the forums!
    Try less than 100 at a time, (less than 50 for some ISPs).
    You may get your answer here, but It's quite acceptable to start a new topic of your own, feel free to start a new topic to attract more helpers to your particular situation, here's a link if as is often the case, it's hard to find out where to do it...
    http://discussions.apple.com/post!default.jspa?forumID=753

  • Send mail with no sender address using Javamail

    I'm trying to send emails using javamail, it works fine but I would like to send emails with no sender address. When I don't set :
    message.setFrom(new InternetAddress("[email protected]"));
    or do just
    message.setFrom()
    I get my_user_name@my_machine_name as the sender address when i recieve the email.
    I understand the security problems about sending emails without sender but i need to automate the sending of confirmation messages that recievers can't answer to.
    Quentin.

    I get a lot of e-mail newsletters that say at the bottom "Please do not reply to this, nobody will read your reply". What's wrong with that? Set up an address and automatically purge any messages sent to it on a regular basis.
    Or if you want a different way to annoy people, use an address that doesn't exist on your server. Then people get a bounce message when they reply to it.
    You might also want to evaluate commonly-used spam filters and see if they filter out messages that don't have from-addresses. No point sending people messages if they get filtered out.

  • After upgrading to mountain lion, i find that my mail app does not have a "VIP" Tab. Was wondering if anyone else has this issue and what it is about?

    after upgrading to mountain lion, i find that my mail app does not have a "VIP" Tab. Was wondering if anyone else has this issue and what it is about?

    First, select sender(s) as VIPs. Then the VIP category will appear.
    To select a sender as a VIP, open an email from that sender, then hover over their name and a star icon will appear to the left. Click the star, and that sender will be set as a VIP (and the category will appear in the pane on the left).

  • Mail Adapter :  Email has blank sender

    I have an interface that creates an email and attaches 2 files.  This all works great in our development environment.  In our production environment, however, the same scenario creates an email with no sender.
    The "from" attribute in the mail CC is set to GeFacto
    In dev the email is created correctly with GeFacto as sender.  If I look in Lotus Notes on the email's document properties the from field has "GeFacto".
    In prod the email is created with no sender.  If I look in Lotus Notes on the email's document properties the from field has "<GeFacto>".
    Somehow prod is putting angle bracklets on the "from" attribute, which Lotus Notes is interpretting differently.
    If I change the "from" attribute in XI to be <GeFacto> in dev environment (where it previously worked) it does the same as production and creates the email with a blank sender.
    We have vers SP19 in development and SP16 in production - This is the only difference I can see because the CCs are identical.
    Please help - I have been stuck on this for a while!

    Yes crazy but true!!!
    We have development SP19, quality SP19 and then production SP16.
    It makes debugging very difficult - especially with problems like this one.
    They were supposed to put SP19 into production - but basis had so many problems putting it into the test systems - I think they are scared to put it live!!!!

  • When I try to send an email with photo attachment to a contact a screen appears stating "the sender name is not recognized by the server " what do I need to change so this will not happen in the future. I am a novice!!!!!

    When I try to send an email with photo attachment on my iPad a screen appears which states " the sender is not recognized by the server" . What do I have to change so I can always send emails fr om my iPad with or without attachments. I am a novice!!!!!!

    If you purchased about 2 years ago new I am sure it is a Intel iMac. To find out what type of iMac you have just click on the Apple menu item in the finder and select about this Mac. I would check the ISP mail site and get the correct outgoing mail server info.   

  • I'm not able to send emails with mail.ru. Receiving and reading is not a problem. When I create a email with mail.ru its not possible to send it although its stored in my mail.ru account as "still to be send". What can it be??

    I'm not able to send emails with mail.ru. Receiving is not a problem. Creating a mail is also not a problem and the mail will be stored at mail.ru as still to be send, only problem is its not possible to send. I noticed the buttons for sending change colour when used but they don't perform. What it is?

    Don't know what changed, but all of a sudden able to send emails by mail.ru ...... sorry for bothering.

  • After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
    From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
    I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
    I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite.

Maybe you are looking for