What to do about Fault Bucket problem?
Difficult to say why I have this.Is it OK to sent error reports to you guys?Copy and Paste type thing?
Sorry I took so long.I have not checked the Graphics Driver yet.Although when I was going through all this,it seems like all fingers were pointing towards a driver problem.But when I looked there never seemed to be driver that stood out as a problem.I found out that either Java.Adobe,Microsoft,or all of them at once needed updates.My auto updates didn't work for some reason.So my computer was trippin.Hard.And so was I!!!As far as the Fault Bucket..........??I'm not real great on the computer so the term 'Fault Bucket 'is probably way above anything I would know.I can't remember where I had seen it.It just popped up on a page and it filled the whole page!!And then some!!!!I don't think it's a problem now.I've been cleaning the living 'you know what' out of my computer!The computer is running a lot better now.2 people responded to my question and I want to thank you for that.I really appreciate it.
Similar Messages
-
What to do about this adobe problem
i just hate adobe flash, yet can't do much with out it. It start to happened a few year back i think, once in a while it would just froze everything on my pc computer, especially when i'm watching a video, got that fix after i uninstall the latest version which was the 11 i think, and install the 10.
Now just a month ago, i bought a laptop, everything work fine, because i haven't dl adobeflash yet, and yeah i can't use a few online player because i didn't dl it, but after i dl it recently, the freeze thing started to happen to my laptop, it even freeze my norton internet security, this time, i don't even have to use an online player, the fcking **** would just froze everything just for starting firefox, and if i want it to goes away i have to do alt ctrl delete and end adobe flash, not the stuff you're using but the adobeflash, and everthing would just went back to normal. omg i hope someone out there could come up with a solution for thisSince you're having problems with Firefox, I'd recommend going through the troubleshooting steps outlined in this FAQ:
How do I troubleshoot Flash Player's protected mode for Firefox?
If you can consistently reproduce the problem, I'd recommend trying to temporarily disable protected mode as outlined in the FAQ. If that solves the problem, re-enable it and give our 11.6 beta a shot to see if that helps.
1/23/2013 - Flash Player 11.6 Beta -
When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show -
please , help me for apple id....... i made new id but there is a credite card option and that's why i am not able to download any free application for iphone,.....so,.....what i do about this problem..???
You can create an Apple ID without a credit card by following this guide exactly: http://support.apple.com/kb/ht2534. Note that you have to start by downloading a free app, then create the ID.
-
Since upgrading to OSx 10.9, I cannot place my music for iPhoto slideshows. The only music that works is the Sample and Theme music that comes with iPhoto. Any idea of what to do about this problem?
In iTunes go File -> Library -> Organise Library -> Reorganise Library.
Then quit and restart iPhoto.
Credit to user keysandfood who figured that one out. -
What is this about: "There was a problem connecting to Facebook."
What is this about: "There was a problem connecting to Facebook. The operation couldn't be completed. OSStatus Error -1) and then I have to hit "Okay" sometimes over 100 times or just force quit Aperture. Happened again this morning and I had to hit "Okay" 55 times.
Hey Rob,
Thanks for the quick post! I checked the Login Items and it looked like there were three applications checked off that had uknown types next to their names. I unchecked them and hope to see this fix the pop up box.
I'll respond if this does or does not fix the pop up.
Thanks! -
Using Instagram via Iphone5 this morning. I got this prompt message "Apple Battery Update". It said my battery had a problem and encourage me to install program to update my battery. What is it about? Is it a scam?
Sounds like a scam to me Read http://www.gadailynews.com/news/savannah/157866-latest-phishing-scam-targets-app le-customers.html
Message was edited by: Ocean20 -
I received a message about having too many contacts? Not sure what this means, didn't know there limitations on contacts. Can you tell me about fixing this problem?
What were you doing when you received the message?
I have seen reports on these forums where there is a limit to how many contacts you can have in the "to" field of a text message. That is the only thing I can think of where someone has reported getting a warning about too many contacts. -
Since upgrading to iOS 7.0, my friend can no longer text me. I get all other people's texts with no problem. I can text her, she can't text me. It bounces back to her phone as "message undeliverable". Does anyone know what to do about that?
your number can remain on the imessage server for some time
-
Doe's anybody else have trouble with your hero characters not showing on screen and what to do about it. This is on CastleAge HD from Phoenix games ? This is on an Ipone4s.
You'll be more likely to get help with this if you ask in the CastleAge forums, I would suspect:
http://www.castleageforums.com/cforum/
Regards. -
I am from Kosovo, in Kosovo there isn't any apple store, I took my phone to fix in a shop and they changed my Icloud, my phone is now deactivated accidentally but the shops password has been hacked. I dont know what to do about it. If there was an apple store here i could take my phone there and fix it but i dont know what to do since i can't find the Icloud password. My phone remains deactivated. The people from mobi shop dont take the responisibility they say its not their fault the Icloud got hacked. Please help me because Iphones are very expensive here I had to work alot to get one. And when i finally got one it doesnt work.
Well we know whose fault it is but we cant do anything about it because of the hackers but i was hoping someone could help me in some other way. if i send You the apple id and everything could the apple stores there do anything about my problem. Cuz in kosovo i can never fix it.
-
Fault bucket 3031143805, type 5 Event Name: WindowsUpdateFailure
Hi, I received my THINKPAD T530 five days ago when I start updating it it will not update windows 7 proof. I it turned out that the original image that came with it was corrupt and has no recovery partition. lenovo sent me recovery CD, now I get this report of error. please help
Fault bucket 3031143805, type 5
Event Name: WindowsUpdateFailure
Response: Not available
Cab Id: 0
Problem signature:
P1: 7.6.7600.256
P2: 80070643
P3: 9BD35FB2-8618-4F00-B75D-DFD8D7E93278
P4: Install
P5: 101
P6: Unmanaged
P7:
P8:
P9:
P10:
Attached files:Is this when you are performing or attempting Windows Updates? If so I would google windows update fix and run the fix from microsoft.
More info on what you are doing when the error occurs please. Thanks -
Keep getting this event 1001, windows error reporting fault bucket. No idea what driver or app is causing this problem. Thank you for any help you can provide!
Fault bucket -824565334, type 5
Event Name: AEAPPINVW8
Response: Not available
Cab Id: 0
Problem signature:
P1: 101
P2: 2
P3: 6.3.0.0
P4: 1033
P5: 68
P6:
P7:
P8:
P9:
P10:
Attached files:
These files may be available here:
Analysis symbol:
Rechecking for solution: 0
Report Id: b09aeac4-7cdc-11e3-bea8-d850e605b79c
Report Status: 0
Hashed bucket: 6c3ac182050ca55d3e62cebf74de99f8
<Event xmlns="">
- <System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-01-14T05:28:26.000000000Z" />
<EventRecordID>3823</EventRecordID>
<Channel>Application</Channel>
<Computer>ANewPC</Computer>
<Security />
</System>
- <EventData>
<Data>-824565334</Data>
<Data>5</Data>
<Data>AEAPPINVW8</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>101</Data>
<Data>2</Data>
<Data>6.3.0.0</Data>
<Data>1033</Data>
<Data>68</Data>
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
<Data>0</Data>
<Data>b09aeac4-7cdc-11e3-bea8-d850e605b79c</Data>
<Data>0</Data>
<Data>6c3ac182050ca55d3e62cebf74de99f8</Data>
</EventData>
</Event>When this happens, I am usually away from the computer or don't notice the problem when it happens. I receive no pop-ups or errors except for what is in the event logs.
This may help:
Right after the fault bucket occurs, at exactly the same second, these three events are logged everytime:
1)event 102 ESENT
svchost (4292) Instance: The database engine (6.03.9600.0000) is starting a new instance (0).
2)event 105 ESENT
svchost (4292) Instance: The database engine started a new instance (0). (Time=0 seconds)
Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.000, [4] 0.016, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000.
3)event 326 ESENT
svchost (4292) Instance: The database engine attached a database (1, C:\ProgramData\Microsoft\Windows\AppRepository\PackageRepository.edb). (Time=0 seconds) Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.000, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000,
[8] 0.000, [9] 0.000, [10] 0.000, [11] 0.000, [12] 0.000.
Saved Cache: 1 0
Then exactly 5 minutes later, these two events are recorded:
1)event 327 ESENT
svchost (4292) Instance: The database engine detached a database (1, C:\ProgramData\Microsoft\Windows\AppRepository\PackageRepository.edb). (Time=0 seconds) Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.000, [4] 0.000, [5] 0.000, [6] 0.015, [7] 0.000,
[8] 0.000, [9] 0.000, [10] 0.000, [11] 0.000, [12] 0.000.
Revived Cache: 0 0
2)event 103 ESENT
svchost (4292) Instance: The database engine stopped the instance (0).
Dirty Shutdown: 0
Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.000, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000, [11] 0.000, [12] 0.000, [13] 0.000, [14] 0.000, [15] 0.000.
I checked scheduled tasks and found these tasks occur at -exactly- the same time:
Windows > Memory Diagnostics > ProcessMemoryDiagnosticEvents > The operator or administrator has refused the request (0x800710E0)
Windows > Memory Diagnostics > RunFullMemoryDiagnostics > The process terminated unexpectedly (0x8007042B)
Windows > Servicing > StartComponentCleanup The last run was terminated by the user (0x41306)
Windows > TaskScheduler > Regular Maintenance The process terminated unexpectedly (0x8007042B)
Windows > Time Synchronization > Synchronize (0x420)
Windows > WS > License Validation The operation completed successfully (0x0)
Any assistance is appreciated! Thank you!! -
I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back
Hi there
I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these. Instead it just took me to the
adobe page with nowhere visible to update. I then sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
functionality It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe.
I have since remedied the problem as my original lightroom 5.7 icon is still available on the desktop and have gone back to that. I do feel that this is a bit
of a rip off and an unnecessary waste of my time though.
Thank you for your prompt reply by the way.
Carlo
Message Received: May 04 2015, 04:52 PM
From: "dj_paige" <[email protected]>
To: "Carlo Bragagnolo" <[email protected]>
Cc:
Subject: I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have
reduced functionality what it this about and how do I get my product back
dj_paige created the discussion
"I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
this about and how do I get my product back"
To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
> -
What is it about this markup that breaks DW CS3 Design View Editing?
Folks:
I'm attaching very simple --and apparently completely valid-- markup that generates the text shown between the markers below:
------------start----------------
yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda badda.
------------end----------------
As you can see by examining the file, it contains only an span enclosing text and spaces, and some following breaks. This file passes DW validation: no errors or warnings.
If I open this file in DW CS3 Design View, select and delete the last word, "badda", the entire text --every "yadda"-- is also deleted. All that text is really gone -- if I immediately save the file and re-open it, there is no text content at all, just the span pair, spaces, and the trailing breaks. This is completely repeatable.
When you edit this file, do you get the same result?
The attached file is a cut-down, simplified version of a production file that exhibits this issue. (That file also passes validation.) When I delete single words, entire content paragraphs disappear. So this is not just a point of curiosity. I need to figure out how to fix the production code and avoid this problem in the future.
What is it about the attached markup that causes this issue? I've fooled around with this code quite a bit and the best I can figure out is that DW is confused when both the start- and end- span tags are followed immediately by a line break. Inserting a space in either place makes the issue go away. But the production code doesn't have any occurances of this pattern. And, anyway, line-breaks have no significance to html, just for source-code formatting, right?
Am I missing something incredibly obvious?
TIA
hen3ryNancy O:
Thank you for your response, which gave me valuable clues to understanding the issues. (Specifically, it led me to re-read and understand better the nitty-gritty of the HTML4 specs, section 7, "The global structure of an HTML Document", especially 7.5.1 The BODY element.)
I believe you are saying --in sum-- that to be reliably edited in DW, each source file must comprise a syntactically correct and complete HTML Document.
I am attaching a second file, "badcode2.html", modified substantially as you suggest. It passes the DW validator, the validator.w3.org test, and the www.totalvalidator.com test. No errors or warnings.
I do this: Launch DW, open this file, choose Design View if necessary, select the final word of text, "badda", and activate Edit-->Cut (or Delete). As before, all the other text is deleted as well. This is repeatable.
It seems to me this sample code satisfies your general principle. Could I be misapplying the three validation tests? Or that passing these tests does not assure the document is syntactically correct and complete? Can you recommend other tests?
I'd like to add the following two points as a matter of background and a bit of niggling:
--I'm aware that complete HTML pages must contain <html> , <head>, and <body> tags, although the HTML4 specification seems to say <body> tags are optional. All my production pages, as served, contain these tags. My underlying design is a php template with individual content files incorporated by inclusion. There may be only one set of <html> , <head>, and <body> in a page. The "outer" template code provides these tags, and individual content files cannot contain a nested set -- so they must be "bare" markup. Is DW able to support this design, in which "bare markup" files are seemingly unavoidable? Is there a mechanism analogous to DW Design-Time Style Sheets to provide virtual existence of these tags so "bare markup" files can be successfully edited? I've looked for such a mechanism but not found one. Or some completely different method?
--You specify the inclusion of <p> or <h1> tags within the body. Is there some special significance of <p> or <h1> with respect to stable editing in DW? My reading of the HTML4 spec indicates that a single block element is the minimal requirement for body content. Either of these tags qualify, right? But so does <div>, and that's what I use in my current example. Am I misunderstanding something?
Bottom line, I'm looking for a pragmatic solution for my problem: Once in a while, among hundreds of structurally similar "bare markup" pages I edit in DW without any problem, I lose data. If inserting an additional tag into all my content include files eliminates these occasional problems, I'm willing to do that, as long as: (1) There is an arguable technical basis for the addition, (2) the added tag does not produce anything visible on the served page, and (3) the validators don't flag the extra tag.
Suggestions, please!
Thanks,
hen3ry
Maybe you are looking for
-
Does Captivate allow a user to track your progress?
Does captivate have the ability to track a users progress? I am trying to create an e-Learning project and I would like to allow the user to stop and exit the course and return a later date at the part of the course they had left. Is this possible. T
-
Customize Web Service Home Page in OC4J
I am using OC4J 10.1.2, I have developed a webservice using JDeveloper 10.1.3 by selecting j2ee sebservice version J2EE 1.3 (Oracle) Web Service. On accessing the webservice using the browser I am getting the WebService Homepage with the option to ac
-
JDBC on Oracle App. Server...can it run?
Can I write JDBC program and run it through Oracle Application Server? null
-
Hello i've made a small app It has two tab on first tab i make entry of database on second tab i view my changes of databases What i need is to update my database automatically when i clicked second tab But my app only updates database when it's re-e
-
Mod_rewrite not working for virtual host nor .htaccess
I've been tearing my hair out trying to implement mod_rewrite on my Leopard Server. I have finally been able to get mod_rewrite to log what it does, but that has only shown that it DOES periodically respond to a /server_status request from the server