What to do if iphone stays blank screen for so long

if anyone knows how to fix this please send anaswer

The iPhone really does not have user serviceable parts. If you open the device in an attempt to service it yourself, then you void any post-warranty support from Apple. They will not touch the device again. Should you make any mistakes, no one from Apple will service the device. If you take it to Apple, since it is an iPhone 5, it may qualify for their Battery program. Go to www.apple.com/support/iPhone and check to see. If not, you can still make an appointment at the Genius Bar of the nearest Apple store to have the device checked. If it is the battery and it does not qualify for the program, you may be able to get the battery replaced at a lower cost than replacing the device. Apple will be able to tell you how to proceed.

Similar Messages

HT1338 When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed and remains as if the computer is now Frozen. Mac book Pro leopard operating system. What can I do to get past the freeze?

When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed and remains as if the computer is now Frozen. Mac book Pro leopard operating system. What can I do to get past the freeze?

Could the disk have failed?
Can you hear it?
Boot from the install DVD and see what Disk Utility says.

Just downloaded 10.5. It gives me a blank screen for the itunes store. No error message. Internet connection fine. Have checked firewall. Any ideas?

I have just downloaded 10.5. it gives me a blank screen for the itunes store. No error message. Internet connection fine and I have checked my firewall settings. Any ideas? Or is the store blocked because of ios 5 release today?

I've had the exact same issue since late last night since I downloaded 10.5
I'm also having problems backing up my iPhone, which I suspect is due to the same issue.
I've tried all recommended solutions on forums and Apple support (deleting backups, restarting phone/computer, disabling/uninstalling third party security software, testing port connectivity) and none of them work.
I will try japiohelp's solution and see if that does anything.

[solved] Blank screen for few seconds between GDM and Gnome-Shell

Hi there,
I don't know if this phenomenon is "normal" or not, so I ask : I am using Gnome 3.6 and after I have logged in on GDM I see a blank screen for roundabout 3 seconds before the gnome-shell starts. The whole system is running fine - so this is no "real" problem -, but this 3 seconds of a black screen between GDM and the gnome-shell are somewhat annoying and I want to find out if this behaviour is normal or not .
Indeed, if I look into journalctl, I find this messages:
Dez 03 21:45:53 sushi gdm-simple-slave[272]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Dez 03 21:45:53 sushi gdm-launch-environment][305]: GLib-CRITICAL: g_variant_compare: assertion `!g_variant_is_container (a)' failed
Dez 03 21:45:53 sushi gdm-launch-environment][305]: GLib-CRITICAL: g_variant_compare: assertion `!g_variant_is_container (a)' failed
Dez 03 21:46:03 sushi gnome-session[311]: WARNING: Detected that screensaver has left the bus
Dez 03 21:46:03 sushi gnome-session[311]: CRITICAL: gsm_manager_set_phase: assertion `GSM_IS_MANAGER (manager)' failed
Dez 03 21:46:03 sushi gdm-simple-slave[272]: WARNING: Failed to remove slave program access to the display. Trying to proceed.
Dez 03 21:46:03 sushi gdm-simple-slave[272]: WARNING: Child process -311 was already dead.
Dez 03 22:00:50 sushi systemd-tmpfiles[1793]: stat(/run/user/1000/gvfs) failed: Permission denied
Actually, I don't know if this is relevant for my little "black-screen" problem (but it looks as if ...).
And
$ systemctl status gdm.service
shows nothing to worry about (as far as I can see):
gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
Active: active (running) since Mo, 2012-12-03 21:45:51 CET; 40min ago
Main PID: 266 (gdm-binary)
CGroup: name=systemd:/system/gdm.service
├─266 /usr/sbin/gdm-binary
├─272 /usr/lib/gdm/gdm-simple-slave --display-id /org/gnome/DisplayManager/Displays/_0
├─279 /usr/bin/Xorg :0 -background none -verbose -auth /var/run/gdm/auth-for-gdm-xTnD7p/database -seat seat0 -nolisten tcp vt1
└─440 gdm-session-worker [pam/gdm-password]
The hardware is an Asrock H77M-ITX board with an Intel GPU. Systemd is up and running well, no failing service units.
Any ideas, what's going on here?
Last edited by swordfish (2012-12-08 14:26:00)

Finally I found out what's going on - and it's so simple
It's just my monitor which is runing on a default resolution of 1920x1080. When I switched to 1600x900 using Gnome's system tools, the monitor needs roundabout two seconds to adjust to this resolution

Why does my title text stay on screen for the duration of my iMovie?

Adding a title text to my iMovie, can someone help me figure out why it stays on screen for the duration of the video? Can't seem to find a way to edit the duration of the text.

The flashing globe icon means you are trying to start from a netboot server that doesn't exist or is offline. This will fix it: http://docs.info.apple.com/article.html?artnum=31355

ITunes LP material only stays on screen for 10 seconds

I have ATV (software up to date 17/APR/10) hooked up to iTunes 9.1(79) on Snow Leopard all updates installed. The issue is, when playing back an iTunes LP on Apple TV, I can see the navigation screens, view lyrics, etc. but they only stay on screen for 10 seconds then ATV just jumps back to displaying the old album cover and song title as per non- iTunes LP titles.
I don't have shuffle set or anything like that and the iTunes LP is synced and the include iTunes LPs and include videos boxes are both checked in iTunes. So basically it isn't that I can't work iTunes LPs on ATV, just that most of the time,, the lyrics have disappeared off screen before the first line has been sung.
Help!
Message was edited by: Nidi

See the white-screen topic of:
iPod touch: Hardware troubleshooting

I dropped my iPhone 5c and it wont turn on but its constantly vibrating. I have tried holding the home and lock screen for a long time but nothing has happened. How can I fix this?

I dropped my iPhone 5c and it wont turn on but its constantly vibrating. I have tried holding the home and lock screen for a long time but nothing has happened. How can I fix this?

You make an appointment at the genius bar of your local Apple Store and get it serviced/replaced. You broke it. If you can't even force a reboot, there's nothing much more you can do.

PLEASE HELP 2/24/13 Brand new iPod Touch 5th Gen froze on set up and I tried to shut it down and it was on the apple logo screen for a long time and it shut down but now it won't turn on! PLEASE HELPPPPPP

DESPERATE PLEASE HELP So my mother got herself an iPod touch 5g for Christmas and barely asked me to set it up last night, (BRAND NEW NOT OPENED YET).. I set it up not plugged into iTunes (directly on iPod). I was setting up a new iTunes account for her (got passed Wi-fi set up and location services) and as I was doing that, it mysteriously froze somehow. So I held the home button and power button down simultaneously, which I thought would restart the iPod/shut it down.. so it did, and it was on the apple logo screen for a LONG TIME.. and when I checked after a long time, it was black. I tried to turn it on, charge, and plug it into itunes (iMac computer) and it won't turn on!!!!! PLEASE HELP

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPhone 5 blank screen

Hello everybody,
I have a new iPhone 5 with iOS 6. After waking up from sleep the screen resolution seems to be more than double of normal and I see only the blank screen without any icons, just blank. Messages are displaying with more than double resolution. But: Impossible to navigate. Impossible to restart because the slider is not seen.
Could handle it only by connecting to Mac/iTunes and resetting.
Has anybody an idea what this is?
Thnax.
Santo

Reset your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Slide to Unlock screen displays, you should be good to go.
Cheers,
GB

My Iphone 5s blank screen and can hear voice command when i press the home button

My Iphone 5s was coming up with voice command and driving me nuts. After trying to reset the phone now I just have a blank screen. when i goes to restart the apple icon will show then the voice command lady will talk in the back ground but still no screen.
Any help please

Try one of these 4Rs toubleshooting steps:
Restart:
1. Press and hold the Sleep/Wake button until the red "slide to power off" slider appears, and then slide the slider.
2. Press and hold the Sleep/Wake button until the Apple logo appears.
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
Restore from backup
Restore as new
http://support.apple.com/kb/HT1414

I am using Iphone 4s. In App Store Update, this page is not getting loaded in my iphone. Blank screen is showing up, rest all pages are getting open. Please tell me the problem and solutions.

Hi,
My Name is Pranav.
I am using i phone 4-s.
In my iphone when i go to app store > Updates, system showing me 10 updates but when i try to open this page, page is not getting open. Loader came up and then white blank screen is visible. Rest all Featured, Top Charts Genius and Search are working fine but updates page is not getting open.
Guys please help me out to sort this problem.
Thanks,
Pranav
[email protected]
+91-8460366331

Looks O.K. to me Opens correctly in Firefox and Opera as a log-in page for Killer Content - Win7x64 Fx5.
I can't see any oddities in your plug-ins. It never hurts to clear any relevant cookies and your cache.
You could see how it goes in Safe Mode - Hold Shift key down as you double click on the Firefox icon>ignore the page that opens and continue. If the page opens you probably have a problem with extensions or themes and you should work through this -
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
A lot of things have been updated as well as Firefox and you could have a culprit or conflict. Next, if there is no improvement you could try disabling third party toolbars, and you should report back at this stage or if there has been early success.
Someone may come by with a more specific remedy.

HT1212 IPHONE HAS BLANK SCREEN

IPHONE WAS DROPPED, NOW HAS BLANK SCREEN AND IS VIBRATING

Bummer. Sounds like it's broken. I'd advise either taking it to a professional for repair or just scrapping it and getting a new phone.

5900XT VTD128 - Blank screen for games

I've just had my new 5900XT arrive and my problem is I can't play any games.
When I start any game, I can hear the sound but the screen goes (and stays blank).
I'm using the 61.72 drivers that came on the MSI CD.
ABit IC7-G MoBo (i875P Chipset)
P4c 2.8 (200*14)
2 x 512Mb Crucial CT6464Z40B PC3200 DDR
GeForce FX5900XT VTD128
SoundBlaster Audigy Player
Diamond Plus 160Gb SATA150 HDD
Diamond Plus 120Gb SATA150 HDD
Sony DRU-700A DVD-RW
Samsung SW-252B CD-RW
Asetek Waterchill CPU Cooling System
Jeantech 423w PSU

Yea boozer, as Richard says, the hardest (and best teaching btw) problems are the multi problematic issues that you face in some systems...they frustrate the heck outta ya but you learn so much from them that you'll see other problems posted from users, after you've fixed yours of course, and your fingers won't move fast enuff to type the answer...
Multi issues are a pain but you are making headway here...the fact that you don't have other "gold board" components at your disposal is really a major hinderance to you, as well as many other users out there, and can/will make it more painful to fix the problem that you're having...
Motherboard, Memory, CPU, Video Card (current release parts that are close matches or exact matches) that are known good (maybe get a friend of yours to help you out here with his/her system?) are what you need to troubleshoot to the extent needed here...swap one component at a time and keep good records of what you see happening, meaning write it down!!! Building a testbed is quite easy using a large piece of plywood and makes swapping parts in and out quite easy...alternatively I've seen ppl cut up an old ATX case and mount it on wood the same way keeping the MB mounting back, CDROM mount housing, 3.5" housing intact and mounting it all to wood...I really recommend this for anyone who takes on the task of building their own units these days as troubleshooting has become the "norm" cause of compatibility issues, driver issues, PSU issues, etc...there are many other reasons to list but these are the main ones I come up against these days...
When I had my computer store, much like Richard, I used that test bed prior to actually building my system into a case to ensure that all of my components played in the sandbox well together allowing me to return what didn't initially play well and I also kept a good supply of "known good components" or "gold boards" on hand in order to ensure that new parts were'nt DOA or damaged...I also recommend highly getting some kind of Electrostatic Discharge covering for your bench that includes a wrist strap snap and then making absolutely sure that it's grounded properly to a waterpipe in the house/garage/office. Then and only then would I handle your components...
Yes this seems quite extensive for the occasional builder, and is really, but this is the only way to ensure that you aren't zapping yourself into pain and frustration...believe me when I say this, I had sooo many customers try to return products to me that I pretested on my bench, showed them they worked, and they took them home and zapped them dead or dying by building their system on a carpeted floor with no grounding of themselves...You can seriously damage a part and not totally kill it dead and it'll work but it won't work properly and will lead you down many misleading roads making you think another part is bad when it really isn't...
Sorry for the dissertation but I'm hopeful that others will read this as well and learn from it...
Good luck on your issue!!

When opening a new window, it just stays blank. For instance when I try to play a card game in yahoo games.

When I go to open a new window by the result of trying to open something on a page, the new window stays blank. There is no error message or anything, it just stays blank.

It could be the work of one of your add-ons, or even add / mal-ware.
Look thru your add-ons list and make sure you know what each one is
there for. Also, check the programs that are on your computer
'''Windows > Start > Control Panel > Uninstall Programs.'''
'''(Mac: Open the "Applications" folder)'''
Go thru the list and use a web search to check any that you don't
know what they are.
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware Troubleshoot Firefox Issues Caused By Malware]''''' {web link}

I am having problems with my itunes, when plugging my iphone or ipod to the laptop - i can see iphone/ipod in the top right corner of itunes but when i click this to the see what is on theis iphone/ipod the option is no longer there, this was working

I am having problems with the new itunes set up ........
when i plug in my iphone or ipod touch it shows in the top right hand corner of itunes
BUT when i click on the shown iphone/ipod the icon its no longer there, i was useing this fine yesterday and it was showing yesterday what is on this ipod and would allow me to add/remove music, but now this option is no longer availlable - i have added a couple of albums to my itunes i can listen to the music from the laptop but cannot sync the ipods to trancefer these albums to the handheld devices -
i have been trying to sort this all day with no luck not sure if there is a problems with itunes or is it something i am doing ????
HELP !!!!!!!!!!!!

BOB we need you urgently
Perhaps Bob will see this thread, he is the professor in these cases.
You do not use a WEP password but wpa/wpa2 on router and equipment.
All equipment connects to WiFi, but for your iPad.
Even with all other equipment WiFi off, you cannot connect your iPad.
Your iPad connects to other WiFi nets correctly.
All resets etc done on iPad and Router.
Still I am not sure it is your router for sure, frustrating...
I want to test 2 other things:
1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

What to do if iphone stays blank screen for so long

Similar Messages

Maybe you are looking for