What to do if we click that under 18 by mistake in the ccna exam even though we are above 18 ?
in exam tense i selected that i am under 18 by mistake. but my date of birth is 17 aug 1985 i.e.24 years. i successively completed the exam. i got score report. but i got agreement papers along with that. what to do now
in exam tense i selected that i am under 18 by mistake. but my date of
birth is 17 aug 1985 i.e.24 years. i successively completed the exam. i
got score report. but i got agreement papers along with that. what to
do now
Hi Bhaskar,
I think you can ask the test center peoples also in this what to do or you can raise your query with cisco directly regarding the same.
Hope to help
Regards
Ganesh.H
Similar Messages
-
There obviously IS enough free space, yet somehow iTunes seems to think there isn't.
What do I do? Did somebody have this problem before?
Tried restarting, switching on and off, nothing workedUnfortunately that's not the case.
I didn't confuse it with my iCloud storage. I'm talking specifically about the storage ON my iPhone.
When syncing the diagram on the bottom of the page (you know the coloured one that gives you Audio, Photos, Apps...) shows me that I have more than 20GB of remaining space.
And I'm trying to get audio on it which is definitely LESS than 20 GB. So it should fit.
But it still gives me the error message that the data I'm trying to sync to my phone is too large -
I need to merge my files that were transferred from my old mac to my new mac - for some reason I now have 2 separate setups on my new mac. I need everything merged to one account.
Thanks!Did you use Migration Assistant? If you set up your new Mac first, you created a user account and when you used MA later, it transferred over the old one. The only way to avoid that is to use Setup Assistant at the beginning of the setup. I used MA once and spent a long time getting rid of duplicates - you can either do that manually or start over: use recovery (Command + R or Command + Option + R keys) during startup, go to Utilities > Disk Utility, erase your disk and download/install again. While going through the setup, use Setup Assistant - it will port over your one and only user account rather than create another.
-
I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overall performance?
The new iMacs do not come with a MiniDisplayPort, they have Thunderbolt, so unless you are talking about purchasing one of the previous generation iMacs such as this refurbished model in the online Apple store, it won't work. And yes, if you are going to get the full range of video resolutions you will need the Dual-Link version.
For details see the store's web page on the Dual-Link display adapter. -
When I try to update my apps, I keep getting the message that there is a problem with my billing information even though this is the billing information I have always used in purchasing my apps. What do I do?
You probably need to confirm the security code of your CC. Log into your account an input this, even if it's already there.
-
The preview of my hardcover book as iPhoto laid it out is 62 pgs. even though there are only 82 photos in my album.
The auto layout used mostly 1 photo, full pages. Obviosuly I can manually re-layout the pages as multi-photo pages and reduce the number of pages.
However, that seems like a lot of pgs. for so few photos since a blank Photo Essay book layout appears to use 73 photos?
I'm not sure I know why iPhoto did not the default layout to fill those photo frames. I expected the 82 photos to use approximately 23-24 pages max.
Is this a full 62 full pgs or 31sheets?
If it is a true 62 pages, what is the cost?
Thanks for the help.What does the book look like in iPhoto in the All Pages window? Are there photos on all pages? Books are printed on both sides of the page so that would be 31 pages.
This book has 48 pages or 24 sheets.
To find the cost click on the Buy Book button and check the price that is presented to you. You can always cancel out of the purchase process.
Happy Holidays -
What should I do if when trying to import pictures from an ipad it says there are no pictures even though there are?
This information should help
Issue or symptom
iTunes may display a message that it could not update iPod because the firmware file was corrupt or not found.
Products affected
iTunes 7 or later
Any iPod
Solution
The message does not indicate that there is an issue with the iPod but that iTunes was unable to read the firmware file it uses to restore or update your iPod. You can delete the folder containing the firmware files so iTunes can download a useable (non-corrupted) version.
Here are the steps to take if you get this message:
Eject iPod and quit iTunes.
Use Disk Utility in Mac OS X or run chkdsk in Windows to verify there are no other issues on your hard drive.
Locate the iPod Software Updates folder:
In Mac OS X, the folder is
~/Library/iTunes/iPod Software Updates (~ represents your home directory)
In Windows, the folder is
C:\Documents and Settings\yourusername\Application Data\Apple Computer\iTunes\iPod Software Updates
Note: If you don't see the files in Windows, turn on the Show hidden files option.
Open My Computer.
From the Tools menu, choose Folder Options.
Click the View tab.
In the Advanced Settings pane, select the "Show hidden files and folders" button.
Click OK.
Drag the iPod Software Updates folder to the Trash or Recycle Bin.
Connect iPod and open iTunes. You will need to be connected to the Internet to download the files. -
My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. PLEASE HELP ME
I have the same problem with mine... but im trying to find a way to fix it without restoring it...
but one fix is to shut it down completely ... then press and hold BOTH the power button and the home button .. hold both of those 4 ten seconds .. then release the power button but still hold down the home button .. and then it'll show something that says "connect to itunes" once u get it connected to itunes , click the restore button ... BEWARE THIS WILL WIPE OUT EVERYTHING ON YOUR IPOD!!! IT WILL RESTORE IT BACK TO FACTORY SETTINGS , AS IF U JUST BOUGHT IT !!!!! then it should work fine again .. but u will lose all data on there besides the things you have synced with itunes already..
Thats y im iffy with doing this , im trying to find a fix where i wont have 2 restore it but i dont think there is 1 :'(
good luck tho
~sam -
I bought an adapter for my itouch 5 so that i won't need a computer to charge my itouch gen5 - however, i noticed that it was acting up in such a way that i was having difficulty swiping the screen and even tapping the icons. Is the only option for charging is the USB charger/connector? Or is there a specific device that I should use?
iPhone 5 and the 5th gen iPod touches are having this problem without a charger, and will probably be fixed in the 6.1 update. See http://www.imore.com/iphone-5-touchscreen-behaving-badly-under-multiple-rapid-sw ipes
-
Trying to open Premiere elements 12 for the first time even though I had it loaded for a while. It gives me a message that I need to be connected to the internet (which I am) or that my clock is off (it is correct). Any suggestions?
First we need to check , whether the LAN settings is set to detect settings Automatically or not.
Follow below steps .
1)Open Control Panel and then click on the option "Network and Internet" .
2)Click on Internet options, click on 'Connections' tab.
3)In the 'Connections' tab, select 'LAN' settings, you will be able to view the Local area network settings box.
4)Check the box-"Automatically Detect Settings" and then "uncheck" all the other check boxes like 'Use automatic configuration script', 'Use a proxy server' , Bypass proxy server' ,then click on ok button .
5)Click on "LAN settings" button again , make sure "Automatically Detect Settings" is the only option selected, keep the LAN properties window open.
Then launch Premiere Elements 12 and try to sign in.
If the settings were already set like that or you face same issue after signing in , let me know -
Why is it that some songs get listed on their own even though they are part of an album?
Why is it that some songs get listed on their own even though they are part of an album? They are always songs that I had on my computer not imported from a cd using iTunes. I have verified that all the info is correct and matches the other songs in the album. Sometimes I can check the "compilation" box on all the songs in the album and that will put them in order and in the same listing. I'm pulling my hair out trying to figure this out.
Good One CL.
What I did in this case is select all the songs in the album and select Get Info and see if Album Artist and Album and Sort Artist and Sort Album Artist and Sort Album are the same. -
Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?
Please take the Mac to Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best. -
I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back. -
my iPhone 5 has someone in Contacts that is not on my iPad or Mac even though they are all connected to my iCloud account how can I re-sycronise them?
Hello Mr Potatohead,
Thank you for the details of the issue you are experiencing with your iCloud Contacts. I recommend reviewing the sections titled "General troubleshooting," "Troubleshooting with iOS devices," and "Troubleshooting iCloud Contacts in Contacts on OS X Mountain Lion or later (or Address Book on OS X Lion)" in the following article for the issue you described:
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You
I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos. I can stand to re edit one or two projects, but not ALL.
Maybe you are looking for
-
[3/3/2010 Update] There's a issue of using 4Gb sticks on T410 currently that results in video output artifacts and aero interface problems when using Lenovo supplied drivers v8.16.11.8825. I think I can call it confirmed (Three people including me fa
-
Adding my jsp page for administration
can i attach my jsp page to manage users and groups by admin, instead of 9IAS portal page to manage users and groups. if i can use it , then how can i map the values entered in my jsp page with the 9IAS portal page for creating and managing users and
-
Excluding history column, version column, created by etc in populating attr
Hi , I wanted to populate the attributes of a View Object in UI. Is there a way that I can filter out the Created by , Created on , Version history etc ? Just wanted to check if are there any way exists rather than checking one by one . Thanks & Rega
-
Human Task in jDeveloper 11g users list not available
I have the problem, I defined SQL authenticator in wenlogic, and I want to do assignment at human task. But, human task only see jazn users, alhough I see the users defined in db at weblogic console Caused By: ORABPEL-10509 User not found. User "bpmu
-
Pre-ordering through apple site or vzw
I have been seeing a lot of people say that they will be pre-ordering through apples site..however, I thought the pre-orders were only through vzw. Does anyone know for sure...Its about the only thing I am not sure of, that matters to me. If you can