What to do if wifi keeps disconnecting and safari does not load?

My wifi on my Mac desktop keeps disconnecting. When the internet is connected, Safari often "cannot connect to server" or "safari cannot load page" or page "failed to load". The wifi works on my iPhone and iPad, so I'm not sure why it doesn't work on the desktop. Is there anything simple I can do to fix this? Thank you.

Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Be sure to test on more than one Wi-Fi network, if at all possible. A desktop computer can be tested with a mobile hotspot, such as the hotspot created by a cell phone. If the problem only exists on one network, then the access point of that network should be the focus of your attention, not the computer.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter  tab, if there is one. Uncheck the box marked
          Wake for Wi-Fi network access
if it's checked.
Step 5
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 6
In the Wi-Fi settings, select
          Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local only
Click OK and then Apply.
Step 7
Reset the System Management Controller.
Step 8
Reset the PRAM.
Step 9
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first. Turn Wi-Fi off and then back on. You'll be prompted for the password when you reconnect. Save it in the keychain.
Step 10
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

Similar Messages

  • OS X Lion--Safari does not load pages. Updated OS X Lion and Safari does not function

    I updated to OS X Lion and now Safari does not load any pages.

    Actually there would be more than two possible reasons, but I appreciate your input.  To answer your questions, YES and YES.  All other machines and devices in the vicinity als work flawlessly though have not been upgraded (?) to Lion.
    After the install of Lion, Safari stopped working.  It loads a page OK then with no movement on my part it goes to a grey screen with the indicated message.   I force a reload and it may or may not work, then suddenly goes to the same grey screen again.  Over and over again.  I haven't lost connection, not have I lost DNS connectivity.   The program after upgrade has failed and Safari is telling me in a manner which I have never seen before that it cannot load the page, despite the facxt that it has already loaded and then lost on its own.  When I boot from a backup Snow Leopard Disk it reverts to a functional system with Safari Ok.  I have removed all remnents of Safari and restored with same problem. 
    Of course, one cannot go back from Lion and Safari 5.1 will not install on Lion so the problem would seem to be uniquely particular to the upgrade as repeated by many others on the net.
    I'm open for suggestions but not accepting the possibility of a software glitch is no help.
    Thanks again,

  • Can not update tiger and safari does not start

    Hi everybody,
    I have actually two but probably interrelated problems: First, safari does not start and second, I can not update tiger.
    It all started a few days ago on my MacBook (Intel). Somehow, Safari produced an error (I only guess that it was Safari because I was downloading a movie clip) and Tiger was frozen. After rebooting, the whole system had problems (e.g., Safari and Skype were not starting). I tried to reinstall and archive mac os x but with no success. The problems were growing actually even worse (e.g., slow) and at some point in time, Tiger was not even starting. Thus, I did a full new installation of 10.4.8 (delete and install). Afterwards, it worked first but after the automatic software update, the system told me that their was an input/output error (???) during the 10.4.10 update. Afterwards, the whole system had again problems (slow and problems with even booting)!! Thus, the software update made it even worse. So, I did again a full installation (delete and install).
    I have to update my 10.4.8 system, because I also have iLife08 that needs at least 10.4.9. However, I don't know what to do to avoid again these update problems??
    In addition, despite the full installation, Safari is not starting. Thus, there is still some problems but I have now clue where this comes from as it is newly installed?!
    Any ideas?? Thanks...
    Crobus

    Crobus, welcome, since you are starting from scratch with each re-install why not try Kappy's Extended Hard Drive Preparation.
    http://discussions.apple.com/thread.jspa?messageID=5203987&#5203987
    Do all steps from 1 thru 6, it is by far a more maintenance oriented than an Erase and Install. After the preparation, install OS 10 from your DVD, then download the OS 10.4.10 Combo Updater.
    Joe

  • Cannot update software and safari will not load

    I keep geting this - Software Update can’t connect to the update server. Make sure you’re connected to the Internet, and then try again.
    But i am connected to the internet fine. I have tried for days, as Safari will not load the home page, or any other, it just hans so i thought updating would help.
    I have tried moving the plist onto the desktop and tried again but that has not worked.
    Running Snow leopard 10.6.7
    any help appreciated.

    Install each update separately. I got iTunes and Remote Desktop to update, but still cannot get Safari to update. When my Mac is supposed to restart, I just get logged out. Am searching the boards to find an answer….

  • Upgraded to 2.0.2 and Safari does not display iphone webpages

    Hi All,
    are you having the same problem? After upgrading to 2.0.2 Safari does not display for iphone formatted webpages in the right format anymore! Any idea what to do to overcome this situation (besides waiting for the next update?)
    Best Regards
    Christoph

    I am not seeing the problem at all.
    All the iPhone specific web pages I have tried work fine.
    Try a reset.

  • Google Chrome appears to be blocked - keeps rotating & apple toolbar does not load

    Apple tool bar does not load and all icons cannot be accessed

    Thanks for the response. I do have data defined. However, type is not. The specs don't seem to make it necessary to specify both, but if that helps I can. The webconsole shows one error:
    Use of getPreventDefault() is deprecated. Use defaultPrevented instead. That is an error in the jquery javascript code though.
    Firebug doesn't show anything in its console.
    I used iframe and the behavior is exactly sthe same. I'm beginning to think this is a google calendaring issue instead.
    Thanks again.
    -Josh

  • My Mid 2010 MacBook Pro wifi keeps disconnecting, and doesn't turn back on. Help.

    *Mountain Lion 10.8.2*
    Here's what's happening:
    I'll be browsing the internet probably surfing reddit (because what else do college kids do right?) and I'll click one of the links I'm interested in:
    The page won't load at all, as if I have NO internet connection.
    Click the wifi icon in the status bar. Before several networks (not just my current network) would show up. Now ONLY the network I'm currently connected to shows up.
    Turn off the wifi to try to "refresh" it.
    Turn Wifi back on. Now it will say "Searching for network" and show that I'm connected to a network, but the bars never fill the status bar icon. If I go to System Preferences > Network and try to turn on the wifi there it lets me click the button, but nothing happens.
    Get frustrated that the wifi WILL NOT TURN BACK ON and restart computer
    Start browsing the internet again or doing whatever college students do on the internet until it disconnects again.
    See 1
    What I've done to try to aleviate this:
    Made a genius bar apointment. I'm out of warrenty, but he did confirm for me that my wifi card is working as expected, and it's not a hardware issue, but more than probable a software issue. He did some cool trick where he went to Library>Preferences>System Configurations and deleted the entire contents (I think this is where the network information is stored according to some of the plists I looked through) then restarted the machine and everything seemed to work ok for a while, but the problem came back. I actually still do this sometimes when it happens but results seem to be the same every time (Plus I have to re enter network information when I do this).
    Genius bar guy suggested that I try reinstalling Mountain Lion. Didn't want to get rid of my data, so I just did an install over my current build. This took some time, but it seemed to work for a while, but alas the problem came back.
    Genius bar guy suggested (as a last resort) a fresh install. So That's what I did. I backed up my computer (Really I just coppied my documents folder and music folder to an external. I did not use a time machine back up because "ain't nobody got time for dat") and I then formatted my hard drive (Which is an SSD if that may have anything to do with anything), and installed mountain lion again. For a while things seemed good, but the problem came back.
    For clarification:
    It has happened on multiple networks, not just the same network.
    On top of that, every time it happens I have other devices connected to the same network and they work fine.
    It has not always happened, this recently started about 2 weeks ago.
    I have not recently installed any software that could have possibley done this (I use mostly MAS store stuff with the exception of Bartender, TotalFinder, and xQuarts, but all 3 of those had long been installed before I had to format my machine)
    I can't really force the problem, but it seems to happen sometimes after the machine falls asleep, but I know for a fact it's also happened mid use (as described above)
    Can anyone give me any kind of clue as to what is happening, why, and how I can fix it?

    Years of fine internet use via WIFI then randomly it starts dropping then one day (weeks later) it is no longer accessible at all and even saying "No hardware installed" when I click on WIFI icon at the top right on screen. Here is how I finally fixed it!:
    For six months I wallowed in this problem and had to connect my macbook pro to the internet via ethernet cable which as you can image was very restrictive :/
    I have had numerous laptop technicans befuddled by this WIFI problem and most concluding with how my WIFI card must be broken and that I will need to buy a new one. The last suggestion I had on the matter was to buy a USB wifi dongle.
    So I ended up buying this one, http://www.asus.com/nz/Networking/USBN10_NANO/Unfortunately my macbook pro didn't want to read the install disc and it didn't autorun so it didn't work. After reading more forums I saw that you could download the program from the net and sure enough it worked.. BUT STRANGER when I took the USB dongle out the WIFI was still working!! The program appears to have reminded my four year old macbook pro that it is indeed WIFI capable.
    So to find this miraculous program its located herehttp://www.asus.com/nz/Networking/USBN10_NANO/HelpDesk_Download/
    Same link as above just under SUPPORT>Driver&Tools
    You then click on a file when its downloaded and a file called MAC will appear, then click on install. Within 5 minutes you should have your WIFI back. My macbook pro crashed again today but without having to get the shortest ethernet cable you've ever seen out again - I was able to install the program again and WIFI was up and running once more. Moral of the story - didn't need to spend any money to fix this and not even using the USB dongle.
    So happy!! Hope it works for you too!
    This also worked on a MacBook that lost its WIFI when a user accounts password was changed and the keychain password wasn't known to them - another random way to lose WIFI apparently

  • My wifi keeps disconnecting and wont recconect

    hi, so my wifi keeps turning off a certain time in the evening and wont recconect until a certain time in the morning. I've tried everything the apple trouble shooting suggests but nothing is working. In the diagnostics it keeps saying:
    metriclogs {
      triggerTime: 1387203986381
      triggerId: 589827
      profileId: 292002
      wifiAssociation {
        timestamp: 1387203986379
        error: 4294963390
        channel: 6
        signal: -61
        bssid_oui: "\210\037\241"
        security: "WPA "
        deauth_reason: 0
        deauth_source_oui: "\000\000\000
    please, please, please help me.

    As Kneil31, said,it appears that your router is setup to prohibit connecting to the internt at times specified in the router setup.

  • Wifi was working, and now does not discover any networks

    I had wifi working, and now it does recognize any of the 6 networks that everything else discovers, any sugestions?
    I read all related posts, did the software update to latest version, restarted several times, and did wifi reset. Actually my statmenet above is not entirely true. It does discover the network and connects when I place the device on top of a router, but moving to 50cm away from it and the connection disconnects and there are no networks discovered. I have tried it with 2 different routers, both of them are working well with my blackberry and laptop - and this was also working with the ipad before.

    Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo.
    If this does not work, then restore the iPad to its factory settings and start again.

  • Installed Microsoft updates yesterday & today I click on Firefox and it does not load. If I go to download a new Firefox, it tells me to close existing Firefox before the download. I can't see Firefox open anywhere.

    Firefox will not load and I cannot download a new Firefox because it says I have to close the existing one. I cannot find the existing one open anywhere. Also, when I went to download I got a warning that the new Firefox might damage my computer.

    The procedures in the [[Firefox will not start]] article may help, in particular it sounds like this error [[Firefox is already running but is not responding]]

  • The first tab will not close, and often does not load all of a page.

    When I open firefox, the first tab always has 'search bookmarks and history' in the address bar, instead of the url of my homepage, and it will not close.

    While trying to figure out a solution, I removed my themes and I closed the tabs I could, then clicked on the new tab button, doing so changed my original tab into an (Untitled) tab and created a new (Untitled) tab. I then found I couldn't close either tab, I clicked on new tab again, got a third (Untitled) tab, which again I couldn't close. I then closed Firefox choosing not to save. This appears to have fixed the problem; however I do not know which of the above action(s) resolved it.

  • The iTunes Store and Ping does not load!

    I have a question for iTunes for Windows.
    You see, when I go to my iTunes, the iTunes Store and Ping seems to not load!I have been constanly emailing the Apple Support, but none of there informaition helped me as of now.One of there recent info they told me was to post it here, so I am.
    Can somebody please help me because I really want to update my Ping!
    -Superluigi6

    all this also happened after downloading the new itunes update.

  • AEX and Safari, Mail not loading

    I have 3 computers running on my AEX network. 2 are fine, but the primary iMac 20" takes 20 to 30 seconds to load Mail and Safari when first opening. If I plug my cable modem directly into the iMac, all is normal. IE and Firefox load normally thru AEX also, it's only Safari and Mail that give me trouble.
    I've tried to find a commomn thread, but am stumped. If the other non-Apple browsers were slow to load, I'd look at signal strength, router addresses, sofeware updates and the like. I've had this prob for months now. I'm thinking it's AEX-related as opposed to a Safari/Mail issue. I've looked at keychains, Internet Connect, Airport Admin. Safari is version 1.3.2, Mail is 1.3.11. Anyone?

    It appears as if something is slowing down your
    network. If a "802.11B" Client joins your network,
    it slows down your entire network. If all of your
    clients are 802.11G, enable 802.11G only in your AE.
    That may help.
    Fairly noviceful here. How or where do I do this?

  • Wifi sudden disconnection and lock button not working properly on my iphone 4s.......    It is under warranty

    When using wifi on my iphone,sometimes it disconnects automatically...... And my lock button is not working properly.....
    What should i do, my iphone is under warranty....

    The Sleep/Wake button is a hardware issue and that's covered by the warranty. I would take it to the Apple Store and see what they can do.
    Hope that helps

  • I have lost my iBooks and iTunes and iBooks does not load plus I cannot download anything from my app icon.does anyone know what the problem is.

    I cannot use iTunes or iBooks and my iBooks library is blank although I have purchased books in the past.  Also I cannot download anything from my app icon.  Has anyone experienced this and if so how do I correct.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

Maybe you are looking for

  • Problem with my MSI KT4 Ultra

    Hi all! I have a BIG problem, I have tried to look at this board, but there is many different answers out there  ;( I have KT4 Ultra with Athlon XP 2600+ I have set FSB to 166, and when I startup BIOS says Athlon XP 2600+. But in windows system, it o

  • Looking for the block CD Generate Time Profiles for MPC simulation.vi

    Hello everyone!!! I am trying to implement MPC in LabVIEW. I have downloaded certain codes which shows the implementation. My question is in those codes i see a block named as CD Generate Time Profiles for MPC simulation.vi. I tried finding a lot for

  • Latch: row cache objects

    Hello everyone, Note: Apologize for the bad formatting, tried but it seems I forgot how to use it BANNER Oracle Database 11g Release 11.2.0.2.0 - 64bit Production I've seen  high "*latch: row cache objects*" in SP/ASH report for ~14 hours back, when

  • Command Authorization in ACS

    Hi, Can anybody tell me how can I permit only ping command to a group in ACS. What is the actual statement that I want to add in command authorization sets.

  • Getting an error when trying to install photoshop

    while trying to install photoshop cc im getting this error "Camera Profiles Installer 8.0.0.22 {C6182313-E9BE-4987-A912-65C1F9A207AE}' information not found in Media_db" how do i fix this issue?