What to do if you forgot your password for the ipad 2

help me!!!!!!!!!!!!!!!!!!!

If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
  1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
  2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
  3. iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup. If you do not have a
          backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

Similar Messages

  • What do you do if you forgot your password for the itouch

    what do you do if you forgot the password to get onto your itouch

    Connect the iPod to your computer and restore via iTunes. Place the iPod in Recovery mode if necessary to allow the restore.

  • What to do if you forgot your password for a macbook pro?

    I accidentally logged out of my MacBook Pro and i forgot my password. Please tell me what I need to do. Thanks:)

    Resetting Password and/or Home Folder Permissions

  • What to do if you forgot your password and it says connect to itunes

    What to do if you forgot your password and it says connect to itunes

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • If you enter your password on the ipad too many times and your sim card locks, is there a way of recovery without replacing the sim card?

    If you enter your password on the ipad too many times and your sim card locks, is there a way of recovery without replacing the sim card?

    That doesn't lock the SIM card, it just locks you out of the device. 
    If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.
    See this for more info... http://support.apple.com/kb/HT1212

  • HT1848 What do u do if you forgot your answers for the questions

    Please help what do u do if you forget the answers to your questions

    Connect the iPod to your computer and restore via iTunes. Place the iPod in Recovery mode if necessary to allow the restore.

  • How do you get your ipad unlocked if you forgot your password and it became disabled?

    How do you get your ipad unlocked if you forgot your password and it became disabled?

    The instructions on this page should let you reset your iPad : http://support.apple.com/kb/HT1212

  • HT4113 I forgot my password for my ipad. What will I do?

    I forgot my password for my ipad. What will I do?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • HT201343 Forgot my password for the Apple TV. How do I find out what it is? It is not my Apple ID.

    Forgot my password for the Apple TV.
    I was trying to mirror my computer via Apple TV on the TV Screen.
    I have done this many times but now I am being asked for the airplay device passord.
    I tried my Apple ID and the WiFi passwords but neither worked.
    How do I find out what it is?
    Joeblu

    Try going into the setting and under "AirPlay" change the code!
    Hope this helps.

  • I forgot my password for my ipad how can i unlock it

    i forgot my password for my ipad how can i unlock it

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I forgot my password for the admin on my macbook

    I forgot my password for the admin on my macbook. Unfortunately I can't reset it with my apple-ID either. I want to keep my account since I need the things that's saved there. Anyone who can help me?

    With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.
    With 10.4, 10.5 or 10.6 if you don’t have an install disk check this article. http://www.macyourself.com/2009/08/03/how-to-reset-your-mac-os-x-password-withou t-an-installer-disc/
    If you're running 10.7 Lion check this article
    http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/
    With 10.8 or 10.9 restart holding the Command and R keys, then from the drop down
    of actions, choose Terminal.  When Terminal opens type:
    resetpassword
    and press enter.
    You will get a reset password window from which you can select the user you want to reset, the admin account in your case.  Type a new password twice, do not do anything with the hint box.  Click Save, then confirm you want to do this reset.  Then click apply to the user's home directory, and click the apple in the left corner, and choose Restart.

  • I forgot my password for my iPad 2

    Who ever helped me with this problem it had worked so thx to someone out there on Apple Support Communities :)

    If you forgot your password, you'll have to reset it as expalined here: http://support.apple.com/kb/HT5787.

  • Ok so I forgot my password for the Game Center...

    Ok so I forgot my password for the Game Center and the only place I put it is on my lost ipod which I probably didn't backup and I can't just change the Apple ID password because I used a compleaty different password for game center and I'm so confused !!!! Please help!! Is there anyway I can ask apple for my password?

    your game center password is the same as your apple id password.

  • Where do you locate your location on the iPad?

    Where can you check your location on the iPad?

    I'm not sure what your asking but, I use a app called magic piano and when it shares my performance it states that my location is in Australia instead of United States ..
    When I updated my iPad my profile pic and location no longer is correct.
    So I'm trying to fix that and unsure how or why but would like to correct it..
    Thnx. ;)

  • I forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

    i forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    This will tell you how to restore
    http://support.apple.com/kb/HT1414
    You will probably need to use recovery mode
    http://support.apple.com/kb/ht4097

Maybe you are looking for

  • Vendor master field

    Hi sap, IN XK01 under company code data, tab for Correspondence  in this one field for Clrk's internet (Internet address of partner company clerk), please explain what is the functionality of this one. Reg Umi Moderator: Please, avoid asking basic qu

  • Question about Using Windows in the MacBook

    Hello Everybody!! I want to buy a MacBook, due to the fact that my Gateway PC is kind of outdated by now, but I will also install Windows 7 on it. I also read that the MacBook camera is not compatible with Windows Live Messenger, so my question is: I

  • Which cooler pad is good for MBP 13 inch 2011?

    some people said that altaz cooling pad is good. but i see that thermapak is also better. i don't know what must I choose for my MBP 13 inch.. any suggestion whcih one is better?

  • IPad Facebook issues with Safari

    Upgraded our iPad2 to 5.0.1 and when we now access Facebook via Safari, the video in Facebook now loads over the text. According to a Genius Bar guy at our local Apple store, this is a Facebook issue. I don't want to use the new Facebook app as it's

  • Exit in itab.

    Hello everyone, I like to know as to How we can exit from multiple loops using single exit inside the loop. i pasted the code below. I just want to exit out of both the loops and i dont want to use onemore exit or stop there. REPORT  zmadhu_temp. TAB