What to do in the end
Ok, so now that i've finished the project i've been working on forever (a 3 min videoclip w/tons of effects), i wonder what my best move is. I'm looking to do 2 things with it
1)Project it publically on a big screen, so i need the best quality possible
2)Post it on the internet on, say, myspace.
What's the recommended procedure?
Thanx
bmarie79 wrote:
How can paying 35 for a phone not be cheaper than that edge plan that
wanted me to pay between 18.95 -28.95 a month for until $299 was paid
hmmmmmm my math seems to suit me fine
Depending on your data allowance, you will get either a $15 or $25 discount on you line access fee when on Edge which you DO NOT get when signing a contract.
Your math on the price of a phone seems a bit off, too. If you are paying $18.95/month for the phone, that means a full retail value of $455. Paying $28.95/month means a full retail value of $695. Not really sure where you are getting that $299 number. The monthly payments on a $299 full retail value phone would be $12.46.
Regardless, WITH a discount of $15/month those monthly prices you are talking about would come down to $3.95 to $13.95 and WITH a discount of $25/month those monthly prices you are talking about would come down to $6.05 CREDIT to $3.95.
With your $299 full retail value phone, the CREDIT you would receive monthly on your bill would either be $2.54($15/month discount) or $12.54($25/month discount).
Maybe you need to check your math again????
Similar Messages
-
What does #uuf on the end of a hp part number mean?
what does #uuf on the end of a hp part number mean?
Hi criscito,
That's the country/region code for the product. UUF stands for certain countries/regions in Asia Pacific.
Please click the thumbs up button to say "Thanks!"
Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
I am an HP employee. -
Was diagnosed and this is what he wrote at the end - is protected by a link to itunes Storedid not pass the test.before everything was working, firewall settings have not changed ... but in the itunes Store does not go
If the phone is offline there is no way to track it or send a message to it. You can place it in lost mode to lock it and send it a message (see http://help.apple.com/icloud/#/mmfc0f0165), but this will not take place until the phone goes back online, if it ever does. If it does, you will get an email informing you.
You might want to read this: http://support.apple.com/kb/HT5668. -
Why does my LG Cosmos 2 calendar change the start time to the same as the end time?
This does not happen all the time but often enough to be a pain. When I enter a new appointment in the calendar sometimes the phone changes the start time to what I entered as the end time. I thought maybe it was me but it happened twice today and I watched carefully to make sure I was entering it correctly. I was and it is the phone making the change. How do I fix this?
Hi AyaniB
It's been doing it for some time. It seems to be random in occurrence. The day I made the post it happened three times. Since then I have been watching carefully and it does not seem to have happened again. Am I missing any phone updates or anything? How do I check that?
Thanks for your help.
Dave Zamzow -
I had a problem installing icloud on windows 8.1. At the end of the installation process there is a error message.What should I do?
I'm guessing that you have checked and complied with the system requirements?
System Requirements
Microsoft Windows 7 or 8
Microsoft Outlook 2007 or later or an up-to-date browser (for Mail, Contacts, Calendars)
Internet Explorer 9 or later, Firefox 22 or later, or Google Chrome 28 or later (for Bookmarks)
Broadband Internet access
Note: If you are upgrading from iCloud Control Panel 1.1 or earlier, you will need to sign out of iCloud Control Panel and uninstall it before downloading iCloud Control Panel 3.1 -
to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?
Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode? -
HELP, HELP, I am having difficulty making a DVD-R of some photos I have in one of my folders in iPhoto 11. I use iPhoto on my external HD. I have never had problems before today making copies of my photos using DVD-R disk. I am doing the same thing that worked before. Some of my photos are going to be put in a gallery for showing and I need to make a DVD so they can choose which ones to display and enlarge the photos. It was due TODAY! Yikes! At the end of each try I get a window saying "BURN FAILED - The burn to the OPTIARC DVD RW AD-5670S drive failed. The disk drive didn't respond properly and can't recover or retry." help...........
How are you getting the photo onto the disk to burn? Have you tried exporting then to a folder on the Desktop and then burning that folder to disk using the Finder. That will give you a data disk with just the jpeg image files in the folder.
If that's what you're doing and getting the burn failed then it's a system or optical drive issue.
If you're using the Share ➙ Burn menu in iPhoto that will create a disk with a mini iPhoto library on it that can only be used by another Mac running iPhoto.
Can you elaborate on your workflow.
OT -
iPad can't get past step 8 when syncing. I have to unplug before the end. Is this normal? What do I do to solve the issue? Thanks. JD
It is syncing through everything and then failing to close out. If I disconnect then the libraries are all there although I have lost a movie and a few tracks downloaded as a result of this.
JD -
every time I repair my iPod with iTunes, it hangs at the end of the process (while checkin the recovery of iPod). What can I do?
I chose to restore it to factory defaults, but that never succeeded.
It hangs at the end of the process.
printscreen:
http://users.telenet.be/kevvanbelle/iPod/ipod.JPG
Language is Dutch :-)
Littery it says:
Check of Recovery of iPod.
Already for 40 minutes.
I closed down iTunes.
Now, when I turn on my iPod, there is the icon of iTunes with an usb cable towards it.
When I attach it to my computer and turn on iTunes, the message is there that a iPod was stuck in recovery mode and I should retry it.
And then I get the same story. Unpacking, installing, checking... blocked! -
When I am restoring backup data for my iPhone 4 in the end of back up restore it show error message " back up can't be restored" , please advice what I can do to restore my backup
That usually means that there is something wrong with the backup and it cannot be used. You can try restoring the backup again, but if you continue to get the same message all you can do is restore to a different backup, if you have one.
-
I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!
See #C12 in Time Machine - Troubleshooting
-
Can't seem to download any app despite entering the correct password and answering 3 security question but still in the end it comes up the message that my session has timed out no matter what! Please help, many thanks in adv!!
Try doing it on your computer with iTunes and then sync to your iPad to see if it clears the problem.
-
Dear all,
I have had problems with the internet connection with my IPhone 5. I have tried to restore the software to see if that would make a difference.
I have tried now for at least 10 times to restore the software. The phone is locked now in restore mode, and when I get to the end of the restore to verify with the server, i get a consistent unknown error message. Sometimes is says my phone cannot be found.
The phone has the connect to Itunes on the screen and cannot be used.
I am running out of patience now....need urgent help!!
What to do?Contact Apple support for warranty service.
-
I produced a film in imovie and send it to idvd to make a dvd with a theme. After finishing all the dvd starts in my mac-computer and first comes the theme and then the film.
But when I start it with a dvd-recorder at tv first the film comes an at the end of the film the theme comes. What did I wrong? Where is my mistake?Hi
A. Do not Use - Share to iDVD - in any iMovie version at all !
B. Start a BRAND NEW iDVD project
C. in iMovie'08 to 11 - Share to Media Browser and as LARGE - NOT HD or other resolution as quality will be even worse
- in iMovie HD6 - just close it and from within iDVD import the iMovie movie project icon (with a Star on it)
- FinalCut - Export as QuickTime Movie - NO QUICKTIME CONVERSION - AT ALL !
D. When in iDVD - see to that in the Lay-out menu (when it looks like a box-plott) there ARE NOTHING in the upper left most box (Auto Start box). As this overruns any Menu.
E. Save as a DiskImage - TEST this first - befor burning any DVDs
Yours Bengt W -
I am getting this response when I am trying to open a file: Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.” What do I do? I have opened this up in the past without a problem.
Back up all data.
If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.
Maybe you are looking for
-
Assigning a value to a constant in Calc Script
Hi All, I'm trying to assign a value to a constant in a calc script, but not able to make it work. I need to get a user entered value from the database such as Indexation Value, and use that many times in my script. Rather than use: "member1"->"membe
-
First Generation iPod Shuffle switch
I just received a first generation shuffle. Read the manual and am still confused about the on/off/shuffle/play in order switch. It appears to have only two slide postions - on and off. How do I tell the unit I want to either play in shuffle mode or
-
Airport Base Station - setting up base station to already existing network
Hello, I just replaced a network switch on the network. Since I did that I am unable to get Internet connection from our main base station in the server room that distributes the IP addresses. I did a reset to the base station and tried to get it to
-
Using Non BI database as source to Build SSAS cubes and SSRS reports .
hi, I have a requirement where I have to use existing database(OLTP) as my source to the SSAS cubes and then to build the reports. Where for Cubes and Reports I uses SQL Server BI edition. But my existing source data will be in non BI database. My qu
-
About job postings for Oracle Developers Please Help.
Hi to all. This is not a specific doubt about development, is for employment. This is not a Job Posting. I have 2 years of experience developing in Oracle FOrms (Web ann C/s),with another tools (like Jdeveloper),etc with a Bachellor degree in System