What to do, to add the ivory audio units in logic? I can't see it. Thanks
What to do, to add the ivory audio units in logic? I can't see it. Thanks
You can't see it.
Right.
Readers of this post have no idea where you are looking for it.... Is it so hard give a tiny little bit of MORE INFORMATION? Or are you looking for the elusive Logic Psychic Users forum perhaps?
1. Read documentation. It's pretty simple really, like any other 3rd party instrument or effect plugin.
Have you run an installer? Did it say it was successful? If so, then it's there and you should be able to find it without any forum help.
Similar Messages
-
What's the best audio interface for Logic Pro and Mac?
What's the best audio interface for Logic Pro and Mac?
Depends on the computer model and if you have unlimited funds.
-
My macbook screen doesn't work so I have connected it to the TV and now nothing works, I can't see the dock or the finder bar, no folders on desktop either. I don't know what to do!
Do you see anything on the TV?
If you just see your desktop, then your MacBook is defaulting to extended display mode. Try pressing the Command + F1 keys to see if you get the menu bar and other icons.
~Lyssa -
how can i add the airport expres to my network, how can i add the airport expres to my network, how can i add the airport expres to my network
elroiew wrote:
how can i add the airport expres to my network,
Best way for the first set up is to connect the Express via LAN cable to a computer.
Then enter the setup of the express and choose "Join a existing network"
After the setup is done, remove cable and you will see the Express in the Airport Utility
Lupunus -
What is X-CorrelationID in the OEG 11g transaction log ? How can I get it ?
Hi May I have question here:
what is X-CorrelationID in the OEG 11g transaction log ? How can I get it through policy path and keep it's value ?
Thanks.
CliffThe most common scenario would be to use attribute expansion, so if you configure a field with the following:
${id}
Then the value of the field will be expanded to the correlation id valiue.
For example if you wanted to use the id in a log statement you could have something like the following:
The message ${id} was presented by subject: ${authentication.subject.id}
Which at run time would be expanded to:
The message Id-12345-12345 was present by Clive
If the id has the value Id-12345-12345 and authentication.subject.id has the value Clive
Thanks,
D -
Can I Add the User Defined Unit system?
Can I add the User Defined Unit, Just like mm, inch..?
My Clients are Korean.
So. They want to use the Korean traditional Unit system which Not defined in Indesign.
Pls Help me.Impliment IUnitOfMeasure with custom units.
-
Hello I have problome with YouTube on my apple tv. When I add playlist on my Mac I can see the movies and play them but I can't see the movies on my appletv only the name of the playlist and I am can't watch the movies. Anyone know the problome? Please..
Geesh - all this information and no one has any clue to this? Not even someone from Apple?
Can someone at least point me in the right direction? -
The TOC is very confusing. How can I see the whole list of all the chapters, as it would appear in a book? I only can see a vague image of the chapter title, and only from one chapter at a time; the chapter I am on. In the instruction example it shows also only the "title" of the chapter it pertains to, but it is all in legeable text. The inspector gives options, but it does not explain how to apply it, and I cannot see what my option will look like and to what part of the "text" it is referring.
The "lower rectangles" are thumbnails of the actual pages in your book... the text was presumably the content of your book. IF you did as I suggested to keep the TOC listing of a full book.. but removed content on all except the three chapters you want to send off to XXXXX - then the "rectangles are showing blank pages. Which is normal.
You need to understand that Apple created iBooks Author to create a book which can be obtained from their iBooks store. The application is flexible for customisation to a large extent and the innovative make use of that flexibility. The TOC basically replaces the old Index in printed books to advise readers what content is available.
On an iPad, or Mac now, Insterad of using "hyperlinks" from a written index page... which is basic web page navigation - Apple chose to have a visual TOC.
Basically you have to decide - create a three chapter sample which you seem to require - which will show the TOC as it is, or if you the whole TOC of the finished book is required to show... but not the content, you end up with blank "rectangles".
Screenshots oniPads... press the top right start button and the lower centre, home buttom together and it makes a screenshot. Transfer to your computer ( email or Dropbox type cloud) and add to your post. -
Vst to Audio Unit Adapter Logic Pro OS X Mountain Lion
Hi,
So after looking on Google, Fxpansion seemed to be the most famous software used for converting VSTs to Audio Units onto Logic Pro. After buying and downloading it, I figured their company would not provide support anymore, and their software was not compatible with OS X Mountain Lion.
So now that Fxpansion doesn't provide the service I was looking for, I am wondering what you guys are using in order to use VSTs such as Massive or Sylenth in Logic Pro?
Thank you in advance!Its worth noting.. because a lot of people get the wrong idea about such 'wrappers' .....
...that only Mac versions of VSTs work with such 'wrappers' and not Windows versions and as almost every Mac VST is available as an AU plugin anyhow.. such 'wrappers' have become obsolete these days.
Massive and Sylenth are both available as AU plugins.. However, Sylenth is only available as a 32bit plugin and therefore will not work with LPX.
You can use VEP5 however, to run 32bit plugins in LPX but if thats all you use VEP5 for, it is a pricey solution.
Its also worth noting that if you have a PC with Windows installed, lying around.. you can run VEP5 on the PC and that will allow you to access Windows VST plugins that are insatlled on the PC.. with Logic Pro (9 and X) on your Mac -
In CC214 PS Why has adobe removed the "print Size Button" And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?
These two things need to be remedied in their upgrades because It's become such a bother I've had to revert to older versions of PS.Yea, and it's a pain to get to. What was the rational for removing the print size button? With the magnifying glass tool selected in older versions of Photoshop you would get a button that says "print size" right next to Actual pixels, Fit Screen, Fill Screen. Now I have to go out of my way and dig for it if I want to see the print size. Of all the buttons you could have taken away, why not fill screen? I never use that.
Besides the point I just downloaded the Oct Upgrade for PS and surprise! Nothing has changed and these are two big black eyes on newer versions of Photoshop. The Brush preview window is unchanged in CC but in CC2014 it's basically worthless. If you apply a texture to a brush you can't properly see the scale of the texture, the spacing, scatter, etc... -
Photos in iPhoto album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?
Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
I can't get my MAC G4 garageband to talk to my M-Audio interface correctly so I can hear see anything register on Garageband
I have the M-Audio 1 n 1 interface and yes the Instrument panel shows up when I open garageband but i can't get audio to play outboard i see the indicators light up and the volume pids moving but no sound i can hear
-
I just installed Photoshop CS5 on a new Mac . On my older Mac I saw in Bridge on the above right sight of a miniature, a kind of aperture sign so that you know the RAW photo was treat.
I can't see that sign on my new Mac. How do I get back that sign on my new Mac?Apple provides repeat downloads as a convenience, not a substitute for your computers being the primary source of file transfers. All your iTunes information such as playlists, ratings, etc. are in a file on your computer, not in the Apple Store. Typically when you move computers you copy the whole iTunes folder and everything it contains to the new computer. Moving media files can be done with a drive, or by Home Sharing. You can also redownload media but let's say somebody desiced Apple may no longer sell a certain album; it cannot be downloaded again but if you already have it on a computer you can move your copy of the file.
5 authorizations: Some households have multiple computers. If you want ot use one with an account it has to be authroized. It means you can use any computer in the house to make purchaes, etc.
Okay, my 5 minute typing limit for any one response is up.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391 -
PPC Audio Units in Logic intel in Rosetta?
Is there a way to run the PPC only Audio Units in Logic audio on a Intel mac by opening logic in Rosetta?
I tryed and this isn't working but maybe is there a way to tweak something to run this (even if it's slow).
Thanks
Imac 17" 2ghz Mac OS X (10.4.7) 2 Go RAMIf the plugins you want to run are available as standalones (like soft synths or Guitar Rig), you can always run them in standalone mode and use Soundflower to route the audio to Logic. For the midi, use the IAC driver available in the AudioMidi Setup.
-
I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as to how to resolve this issue
I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
I Googled "workaround for FaceTime in UAE" to find this.
Maybe you are looking for
-
I need to be able to embed a multipage tiff into a crystal report but have it show all the pages. For Example, Invoices with Scanned Backup Documents Page 1 - Invoice Page 2 - Legalise Page 3-5 - Signed and Scanned Bill of Lading as it stands i can e
-
Limit dimension to members of particular hierarchy
Hi, I have a dimension say dim1 which has two hierarchy h1 and h2. I want to limit my dimension to have members present in only h1 hierarchy. How can I do this? Thanks in advance. Thanks Brijesh
-
can anyone guide me to create dynamic button? Thank you,
-
Is there any other API for BOM Explosion in R12 other than the one given below? Bompexpl.Exploder_Userexit Thanks Manu
-
Hello. I got a problem in select from DB table. Table format: TYPE BOOKNAME TypeThriller Vbm TypeThriller Dhr TypeThriller Abc TypeThriller Cgf TypeFantastic All TypeFantastic Cdd etc. I need to create XML file like: <Object> <BookObject> <BookType>T