What to do when Import is interrupted - Managed Library

I was in the middle of importing files via File > Import .... I selected to manage the library in Aperture ( not referenced files )
I left the machine running overnight as it was adding 160gig of files.
Upon my return, I noticed that the previews and most files were displayed in the morning - It actually looked like all the import had completed... but it still said importing. Even when looking at the activity monitor - it also said importing - i presume it did the previews ?
My problem came when I returned to my computer after lunch to see .......Aperture had crashed.
How can I verify all the files imported - as I think it still had quite a bit to go...
Is there any way to not check manually, so I do not have to import again ? As I think a manual check may just be on the previews and file count - not checking if the actual file is there ? Also there is loads
Please advise - Much appreciated

Thanks for the detailed reply
Will give each option a try this evening.
There were lots of video files in the import - so I presume you are correct in saying that may be why it crashed, even if it was another type of naughty problem file....
In this case - is there no way to check a managed library import target, against an import destination target - due to the masters being ripped & placed into the aperture 'show contents' folders structure?
I presume your suggestion below only apply's to the files that were imported before the crash tho?
"File➞Switch to Library➞Other/New" will bring up a dialog that tells you how many Originals and how many Versions are in each Library.
Apeture now is just crashing on opening all the time with the spinning ball ....think I may have to delete that whole import to solve the problem, regardless of the next anticipated 'crashing on import' issue that may be an obsolte one with certain files as you mentioned.
Many thanks again for any other suggestions or feedback

Similar Messages

  • How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

    How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

    iDVD does not care about file sizes, as it compresses the file to the standard DVD format of mpeg2.
    It only cares about length i.e. max 2 hours including titles etc.
    iDVD encoding settings:
    http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
    Short version:
    Best Performance is for videos of up to 60 minutes
    Best Quality is for videos of up to 120 minutes
    Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
    Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
    In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
    You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
    Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
    NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
    And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
    http://support.apple.com/kb/HT1502?viewlocale=en_US

  • What's lost when you reconfigure Enterprise Manager?

    Hi all,
    Going straight into the questions:
    What's lost when you reconfigure a EM? And,
    What's stored in the EM Repository?
    Configuration: Windows 2003 Server Enterprise, Oracle 10g release 2
    All of the EM consoles stopped working after we changed the host name on a Windows Server. The EMC services refuse to start.
    It seems that using emca to reconfigure the EMs fixes the problem. But the other problem is that EMCA mentioned that all configuration would be lost.
    I tried searching around the forum, Google and the official documentation but couldn't find much details.
    It would be much appreciated if you could help me out a bit.
    Thanks,
    Benjamin

    EM repository consists set of tables in a database containing state information for the managed environment and information about the management packs. It is used as a back-end store by the Oracle Management Servers, providing distributed control between clients and managed nodes.

  • What causes duplicates when importing from my iPhone?

    For some time i have had many duplicates from syncing my iPhone to my iPhoto library. When importing I specifically say no to importing duplicates
    I have to use duplicate annihilator to rid dups, but appears I still have many duplicates left
    I want to clean up the library before moving photos to aperture

    that does not happen to me - try renewing the iPhoto preference file - A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
    This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
    LN

  • Joint stereo vs. Normal stereo...whats the difference when importing a CD?

    I used to import my cd's at 192kbps and the default setting was normal stereo, but now I do it at 256kbps and the default is joint stereo...whats the difference? Since it defaults to joint at 256, should i keep it there? Thanks!
    Message was edited by: noisexcore

    In audio encoding, "joint stereo" takes advantage of the fact that the two stereo channels are well-correlated to each other, and uses that fact to capture the audio information more efficiently. "Normal stereo" treats the two tracks independently.
    If it is done right, joint stereo does offer an advantage in fidelity at a given bit rate, but there is a lot of folklore about whether various implementations really do it right. I can't say for sure what goes on in the Apple implementation, but unless you are noticing a perceptible difference, my inclination would be to go with the defaults.

  • No cover art when importing CD to music library...

    I travel alot and have a vast CD colllection. That's why I bought my iPod. It's a convenient way to take my music with me on planes, trains, and where ever. While I am very happy with that decision, one of my disappointments that when iTunes downloads CD information from the internet, it does not download cover art.
    I own the CDs and use the music for personal use, so I don't see this as a copyright issue. If I rip the same CD using Widows Media Center, or almost any other software, the downloaded information includes the album cover. Why the hestitency with Apple's iTunes? All I want to see is a picture of the album cover next to the name of the tune that is playing.

    Hello Anna,
    And welcome to Apple Discussions!
    There could a couple of different things happening here. First of all, are you having iTunes automatically retrieve album information from its database and filling in these details automatically, or are you entering the album information in by hand?
    If you are entering this information in by hand make sure the Album name is the same throughout each track. To make sure, highlight all the tracks in the album at once by holding down the CTRL key. Then right->click on them and choose "Get Info" from the menu. From there, head over to the Info tab and re-enter the album name.
    If that is not the case, is this album a compilation, meaning that it has tracks with various other artists as well? If so, its probably marked as part of a compilation in iTunes and you can remove the tick mark next to this option from the Info tab as well.
    For now we'll start there.
    Hope this helps.
    B-rock

  • What happens to CC or Watermarks when imported into PrPro

    HI all,
    my question (s) are about information that is stored in the out of tv safety feilds when imported into Adobe premeir pro. files will be mpeg-2 video files SD and Hd
    1) what happens to closed Captioning data (does it get moved or is it stripped)?
    2) what happens to Nielsen watermarks on line 22 and 20?
    Can anybody give me an understanding of this.
    thank you much!!
    Jay Agoglia

    Nothing happens to the music on your computer. Nothing will "combine" unless this other person actually downloads something to your computer. Simply logging into an iTunes account does not instigate any automatic downloads of anything.

  • I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

    I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

    Hi
    The value of the Channel Strip volume etc is not stored within the C Strip setting, as you have discovered.
    If you really wanted, you could add a Gain plug to the strip, with it set to give the correct output level with the Fader set to 0
    (Or just set the fader manually in MS)
    CCT

  • When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

    When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

    Have a look at your import setting specifically Store Files:
    Make sure it is set to where you want the originals to go.
    Message was edited by: Frank Caggiano - Don;t empty the system trash. The originals that you deleted from the Desktop are in there and are the only copies you have unless they are still in the camera.

  • What happens to Raw files when importing Raw+JPG from camera to Lightroom Mobile on iPad? Only JPGs are showing up.

    Hey I am Brian, and I was wondering how Lightroom mobile works again as in when importing photos directly into iPad using the camera connection kit.? This is for IPad 2.  I . Like when importing raw files. now I just did a photo shoot. and I just uploaded them into lightroom 5 on desktop. the raw files are being pushed as smart priviews acroos ipad and iphone. its kinda cool seeing cr2 file showing up on lightroom mobile. when its coming from lightroom 5. but what about coming from camera to ipad.?
    I thought you can import a Raw plus jpeg into ipad and it shows up as a jpeg plus raw file. well its not doing that. shows up as just jpeg.
    cant wait for next update  of lighroom mobile.

    With this version of LR Mobile we not support the direct RAW import.
    You can vote for this feature request...Lightroom mobile: Ability to import raw files
    - Guido

  • What type of Business Processes can be imported in Solution Manager 7.1?

    Hello Together,
    currently i deal with the topic: BusinessProcessMonitoring.
    My question: what types of businessprocess can be imported in Solution manager 7.1?
    - exported processes out of the NetWeaverDeveloperStudio?
    - processes out of the CE?
    Some else....???
    I would be happy about some answers.
    Thanks and kind regards
    Henry Radziwolek

    Hi Henry,
    Today in Solman 7.1 onwards creation of business processes is really very and you can use the content upload interface which means you can upload the processes via excel file as well.
    so you can download it from other system into a flat file and upload the same in solman to quickly do the same.
    http://sapinsider.wispubs.com/Assets/Blogs/2012/January/Introducing-Content-Upload-Interface-in-SolMan-7-dot-1
    in terms of importing from another solman ...if you have a transport route ...definately you can create a TR and import the project with processes into your new solman system
    or if it is Solution in another system then also you can use solution transfer function/feature to import it.
    Also, if you are talking about Netweaver BPM tool this requires integration setup with solman (BPB) etc to do that like ARIS integration etc.
    Integrate your Business Blueprint with SAP Netweaver BPM
    hope this helps you further.
    Regards
    Prakhar

  • When the Adobe Application Manager will open the following message: Download error. What should I do

    When the Adobe Application Manager will open the following message: Download error. What should I do

    is the error some gibberish like : UW44PKU  or some code similar to that?
    i think the code is        U44M1P7.
    if this is what happens i think i know what to do, that is if you already have PSCS6 (permanent license) version on you risk before you joined cc.
    vince
    Message was edited by: vinsolo

  • CS Adobe Illustrator 6 crashes when importing- what's causing it?!

    CS Adobe Illustrator 6 crashes repeatedly when importing both .tif and .jpg files; this is a new development; what's causing it?! OX 10.10.2 Yosemite

    HI
    I had the same problem but this worked for me..
    remove adobe PDF PPD from the following folders:
    OS/Library/Printers/PPDs/contents/Resources/en.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Ja.lproj,
    OS/Library/Printers/PPDs/contents/Resources/ko.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj,
    then re start Illustrator and try printing again
    Hope ok
    Mike

  • When importing Raw into A3, in what format is the picture displayed? Jpeg or tiff.

    When importing Raw into A3, in what format is the picture displayed on the screen? Jpeg or Tiff ?

    None of the comments you have gotten are particularly useful.  The display is independent of format of the file.  It's rendering is of the full pixels in the image file that you have imported, modified by any adjustments you have made, or not if you ask to see the Master.
    Even if your Master was imported as a JPEG, as seen on the screen it would have been decompressed, and you would see all the pixels (that the screen is capable of).  However, a JPEG may have lost some detail in the compression, but when decompressed has the same number of pixels as the equivalent uncompressed photo format -- but some of them may result from interpolation, and not be the original. 
    Ernie

  • Oracle Wallet Manager hang when import a trusted cert

    i'm facing problem when import 1 of my client's cert.
    it hang and not responsive when i try to import it.
    the oracle wallet manager version is 10.1.0.4.2
    my client's cert is 512bit self signed
    Message was edited by:
    kinwah.lai

    Hi,
    To use it, you need to convert the cert into binary format. Then it is simply dumpasn1 bincert.cer. This dumpasn1 output is obtained from your cert:
    0 30 524: SEQUENCE {
    4 30 438: SEQUENCE {
    8 A0 3: [0] {
    10 02 1: INTEGER 2
    13 02 17: INTEGER
    : 00 C4 CE 12 F5 0D A9 0A 4C C1 56 80 3F B0 01 7C
    : 99
    32 30 13: SEQUENCE {
    34 06 9: OBJECT IDENTIFIER
    : sha1withRSAEncryption (1 2 840 113549 1 1 5)
    45 05 0: NULL
    47 30 126: SEQUENCE {
    49 31 11: SET {
    51 30 9: SEQUENCE {
    53 06 3: OBJECT IDENTIFIER countryName (2 5 4 6)
    58 13 2: PrintableString 'MY'
    62 31 17: SET {
    64 30 15: SEQUENCE {
    66 06 3: OBJECT IDENTIFIER localityName (2 5 4 7)
    71 13 8: PrintableString 'Malaysia'
    81 31 35: SET {
    83 30 33: SEQUENCE {
    85 06 3: OBJECT IDENTIFIER organizationName (2 5 4 10)
    90 13 26: PrintableString 'Carrefour.net V22 Malaysia'
    118 31 55: SET {
    120 30 53: SEQUENCE {
    122 06 3: OBJECT IDENTIFIER commonName (2 5 4 3)
    127 1E 46: BMPString
    : '[email protected]'
    175 30 30: SEQUENCE {
    177 17 13: UTCTime '070309053122Z'
    192 17 13: UTCTime '090309053122Z'
    207 30 126: SEQUENCE {
    209 31 11: SET {
    211 30 9: SEQUENCE {
    213 06 3: OBJECT IDENTIFIER countryName (2 5 4 6)
    218 13 2: PrintableString 'MY'
    222 31 17: SET {
    224 30 15: SEQUENCE {
    226 06 3: OBJECT IDENTIFIER localityName (2 5 4 7)
    231 13 8: PrintableString 'Malaysia'
    241 31 35: SET {
    243 30 33: SEQUENCE {
    245 06 3: OBJECT IDENTIFIER organizationName (2 5 4 10)
    250 13 26: PrintableString 'Carrefour.net V22 Malaysia'
    278 31 55: SET {
    280 30 53: SEQUENCE {
    282 06 3: OBJECT IDENTIFIER commonName (2 5 4 3)
    287 1E 46: BMPString
    : '[email protected]'
    335 30 92: SEQUENCE {
    337 30 13: SEQUENCE {
    339 06 9: OBJECT IDENTIFIER rsaEncryption (1 2 840 113549 1 1 1)
    350 05 0: NULL
    352 03 75: BIT STRING 0 unused bits, encapsulates {
    355 30 72: SEQUENCE {
    357 02 65: INTEGER
    : 00 86 75 E6 DA C8 18 CB 77 44 C5 E9 48 F7 45 41
    : 85 52 8E 70 E7 D1 D0 C5 7E 48 5D BC AB 9E C9 99
    : CC 70 FC 18 F2 E4 12 78 38 7D CA 06 3C 18 64 E6
    : FD 6B 3A CD 00 02 2B A0 67 CB F0 86 1C 13 0F 43
    : D1
    424 02 3: INTEGER 65537
    429 A3 15: [3] {
    431 30 13: SEQUENCE {
    433 30 11: SEQUENCE {
    435 06 3: OBJECT IDENTIFIER keyUsage (2 5 29 15)
    440 04 4: OCTET STRING, encapsulates {
    442 03 2: BIT STRING 0 unused bits
    : '00000101'B
    : Error: Spurious zero bits in bitstring.
    446 30 13: SEQUENCE {
    448 06 9: OBJECT IDENTIFIER
    : sha1withRSAEncryption (1 2 840 113549 1 1 5)
    459 05 0: NULL
    461 03 65: BIT STRING 0 unused bits
    : 51 13 3B 3C 7A EA 9A 97 30 FA F1 2E E5 A4 CD 77
    : D6 02 6D BF 1B 4D E3 F3 5F 93 3F D7 96 0E 40 69
    : 8A 29 B4 B1 B5 C0 79 B8 4C 6E 96 C6 15 26 61 F7
    : 4E D5 27 9C 71 B6 5D 92 E6 3B 71 6E 76 02 E1 97
    0 warnings, 1 error.
    As you can see, there is an error: Error: Spurious zero bits in bitstring. For this particular instance, OWM cannot import this cert properly. Please ask your tp to provide a self signed cert that complies with the ASN1 standard.
    Eng

Maybe you are looking for