What to do when mini runs very slow

I already cleaned up the harddisk and trew all the stuff i dont need away but still the mini is very slow. can you help me?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Similar Messages

  • Mac mini running very slow after downloading yosemite

    Why is my mac mini (mid 2011) 2.5GHz Intel Core i5 now running very slow in all aspects after upgrading to OS X yosemite 10.10.1?
    Here is a recent EtreCheck Report
    Problem description:
    Mac mini running very slow after upgrading to yosemite
    EtreCheck version: 2.1.6 (109)
    Report generated January 21, 2015 at 2:56:48 PM PST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      Mac mini (Mid 2011) (Technical Specifications)
      Mac mini - model: Macmini5,2
      1 2.5 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      AMD Radeon HD 6630M - VRAM: 256 MB
      Cinema HD 1920 x 1200
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Time since boot: 15 days 18:52:31
    Disk Information: ℹ️
      Hitachi HTS545050B9A302 disk0 : (500.11 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 499.25 GB (235.76 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      Apple Computer, Inc. Apple Cinema HD Display
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple, Inc. Keyboard Hub
      Apple Inc. Apple Keyboard
      Primax Electronics Apple Optical USB Mouse
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Problem System Launch Agents: ℹ️
      [killed] com.apple.CallHistoryPluginHelper.plist
      [killed] com.apple.CallHistorySyncHelper.plist
      [killed] com.apple.cloudd.plist
      [killed] com.apple.cmfsyncagent.plist
      [killed] com.apple.coreservices.appleid.authentication.plist
      [killed] com.apple.EscrowSecurityAlert.plist
      [killed] com.apple.icloud.fmfd.plist
      [killed] com.apple.Maps.pushdaemon.plist
      [killed] com.apple.nsurlsessiond.plist
      [killed] com.apple.printtool.agent.plist
      [killed] com.apple.rcd.plist
      [killed] com.apple.sbd.plist
      [killed] com.apple.telephonyutilities.callservicesd.plist
      [killed] com.apple.warmd_agent.plist
      [killed] com.apple.xpc.loginitemregisterd.plist
      15 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
      [killed] com.apple.AssetCacheLocatorService.plist
      [killed] com.apple.awdd.plist
      [killed] com.apple.ctkd.plist
      [killed] com.apple.emond.aslmanager.plist
      [killed] com.apple.icloud.findmydeviced.plist
      [killed] com.apple.ifdreader.plist
      [killed] com.apple.installd.plist
      [killed] com.apple.nehelper.plist
      [killed] com.apple.nsurlsessiond.plist
      [killed] com.apple.periodic-daily.plist
      [killed] com.apple.periodic-monthly.plist
      [killed] com.apple.periodic-weekly.plist
      [killed] com.apple.softwareupdate_download_service.plist
      [killed] com.apple.tccd.system.plist
      [killed] com.apple.wdhelper.plist
      [killed] com.apple.xpc.smd.plist
      16 processes killed due to memory pressure
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [running] com.spotify.webhelper.plist [Support]
    User Login Items: ℹ️
      iTunesHelper UNKNOWN  (missing value)
      AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
      CDSBupd Application  (/Applications/ConceptDraw Office 2/Solution Browser.app/Contents/MacOS/CDSBupd.app)
    Internet Plug-ins: ℹ️
      Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 [Support]
      FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
      Flash Player: Version: 16.0.0.257 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 [Support]
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      GoPro  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          27% mds
          12% WindowServer
          1% discoveryd
          1% Microsoft Word
          1% Mail
    Top Processes by Memory: ℹ️
      253 MB discoveryd
      64 MB Mail
      52 MB Safari
      43 MB iTunes
      43 MB Preview
    Virtual Memory Information: ℹ️
      42 MB Free RAM
      768 MB Active RAM
      744 MB Inactive RAM
      993 MB Wired RAM
      104.37 GB Page-ins
      4.15 GB Page-outs

    More memory will help:
      4.15 GB Page-outs
      16 processes killed due to memory pressure
      15 processes killed due to memory pressure

  • What to do when iCloud runs very slowly

    Our iMac just started running very slowly while doing emails in iCloud. Any suggestions on what to look at?

    Hello,
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.

  • HT1338 Why does my Mac mini runs very slow?

    My Mac mini is very sluggish. New to apple, does anyone know of an app or procedure to make it run smoothly?

    See:
    Mac Maintenance Quick Assist,
    Mac OS X speed FAQ,
    Speeding up Macs,
    Macintosh OS X Routine Maintenance,
    Essential Mac Maintenance: Get set up,
    Essential Mac Maintenance: Rev up your routines,
    Maintaining OS X, 
    Five Mac maintenance myths, and
    Myths of required versus not required maintenance for Mac OS X for information.

  • Mac Mini running so slow

    Not sure how to diagnose issues on my Mac, but I gathered I should run Etre and post results here.  I know I could add more RAM, but this is so slow that I have to believe something else is going on.  Can someone spot anything unusual in the following?
    Problem description:
    Mac Mini running very slow
    EtreCheck version: 2.1.6 (109)
    Report generated January 24, 2015 11:33:17 AM EST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      Mac mini (Mid 2011) (Technical Specifications)
      Mac mini - model: Macmini5,1
      1 2.3 GHz Intel Core i5 CPU: 2-core
      2 GB RAM
      BANK 0/DIMM0
      1 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      1 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 288 MB
      VA2037 SERIES 1600 x 900 @ 60 Hz
    System Software: ℹ️
      OS X 10.8.5 (12F45) - Time since boot: 3 days 4:25:7
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500.11 GB)
      disk0s1 (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 499.25 GB (76.72 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      Apple Inc. iPhone
      Western Digital My Passport 0748 500.07 GB
      disk1s1 (disk1s1) <not mounted> : 210 MB
      My Passport (disk1s2) /Volumes/My Passport : 499.73 GB (67.99 GB free)
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Incompatible Software/avast!.app
      [not loaded] com.avast.AvastFileShield (1.0.1) [Support]
      [not loaded] com.avast.PacketForwarder (1.3) [Support]
      /System/Library/Extensions
      [not loaded] com.cisco.nke.ipsec (2.0.1) [Support]
    Startup Items: ℹ️
      HP IO: Path: /Library/StartupItems/HP IO
      Startup items are obsolete in OS X Yosemite
    Problem System Launch Agents: ℹ️
      [failed] com.apple.accountsd.plist [Details]
      [failed] com.apple.coreservices.appleid.authentication.plist [Details]
      [failed] com.apple.lookupd.plist [Details]
      [failed] com.apple.pbs.plist [Details]
      [failed] com.apple.tccd.plist [Details]
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.wdhelper.plist [Details]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.divx.agent.postinstall.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [invalid?] uk.co.markallan.clamxav.freshclam.plist [Support]
    User Login Items: ℹ️
      Microsoft Database Daemon Application  (/Applications/Microsoft Office 2008/Office/Microsoft Database Daemon.app)
      Dropbox Application  (/Applications/Dropbox.app)
      Google Drive Application  (/Applications/Google Drive.app)
      HP Scheduler Application  (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
    Internet Plug-ins: ℹ️
      AmazonMP3DownloaderPlugin1017277: Version: Unknown
      OVSHelper: Version: 1.1 [Support]
      OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
      Flip4Mac WMV Plugin: Version: 2.3.1.2 [Support]
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 16.0.0.287 - SDK 10.6 [Support]
      DivXBrowserPlugin: Version: 2.2 [Support]
      Flash Player: Version: 16.0.0.287 - SDK 10.6 [Support]
      AmazonMP3DownloaderPlugin: Version: Unknown
      QuickTime Plugin: Version: 7.7.1
      iPhotoPhotocast: Version: 7.0
      HypercosmPlugIn: Version: 1.0 [Support]
      Scorch: Version: 6.2.0 [Support]
      JavaAppletPlugin: Version: 14.3.0 - SDK 10.8 Check version
    User internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 6.0 [Support]
      Picasa: Version: 1.0 - SDK 10.4 [Support]
      BrowserPlus_2.7.1: Version: 2.7.1 [Support]
    3rd Party Preference Panes: ℹ️
      BrowserPlus  [Support]
      DivX  [Support]
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
    Time Machine: ℹ️
      Mobile backups: OFF
      Auto backup: YES
      Destinations:
      My Passport [Local]
      Total size: 499.73 GB
      Total number of backups: 35
      Oldest backup: 2013-11-28 08:26:20 +0000
      Last backup: 2015-01-24 16:14:06 +0000
      Size of backup disk: Excellent
      Backup size 499.73 GB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          17% mds
          6% iPhoto
          3% activitymonitord
          2% WindowServer
          1% Activity Monitor
    Top Processes by Memory: ℹ️
      161 MB WebProcess
      132 MB iPhoto
      86 MB Safari
      82 MB App Store
      62 MB iTunes
    Virtual Memory Information: ℹ️
      33 MB Free RAM
      674 MB Active RAM
      668 MB Inactive RAM
      769 MB Wired RAM
      12.57 GB Page-ins
      12.61 GB Page-outs

    Only 2 GB is your man problem. You Mac can accept 16 GB. If tight for money get one 8 GB stick and replace one of yuor 1 GB sticks with the 8 GB stick
    http://eshop.macsales.com/shop/memory/Apple_Mac_mini/DDR3_1333
      12.57 GB Page-ins
    Uninstall your antivirus
      [invalid?] uk.co.markallan.clamxav.freshclam.plist [Support]
    and this one too. Have two is very bad
      /Incompatible Software/avast!.app
      [not loaded] com.avast.AvastFileShield (1.0.1) [Support]
      [not loaded] com.avast.PacketForwarder (1.3) [Support]
    Update this
      HP IO: Path: /Library/StartupItems/HP IO
      Startup items are obsolete in OS X Yosemite

  • My mac mini is running very slow all of a sudden, how can i restore it's speed?

    my mac mini is running very slow all of a sudden, how can i restore it's speed?

    This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
    If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
    Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking  anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    clear; shopt -s extglob; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='User %s%%\t\tSystem %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */   /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; grep -q 'No th' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=`ls /L*/L*/Dia*/*.panic | wc -l`; Ps "Panics"; o=`ls /L*/L*/Dia*/*.c* | tail`; Pm "System crash logs"; o=`ls L*/L*/Dia* | tail`; Pm "User crash logs"; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; [[ o -lt 5120 ]] && Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 90 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Pm "Total CPU usage" && s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process $s of user ${s[1]}"; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process $s of user ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=`ls -A "$d" | egrep -v '^(\.DS_Store$|com\.apple\.)'`; Pm "$d"; done; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep :`; Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(egrep -v '(local|broadcast)host' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in {0..1}; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
    If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
    The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There is no indication of progress until it's done. Wait for the line "[Process completed]" to appear in the Terminal window. If you don't see that line within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
    When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Oracle 10gr2 Master/detail form running very slow when you navigate to the detail record.

    Hi All, I have a master detail  form, running in webserver, when I navigate to the detail block, the form start buffering and buttering for about 2 min. There is a trigger when-new-record instance that is firing when you navigate to  a new record : The select part of this stament is taken a long time to execute. I modified this in toad and what used to take 25 seconds to run is taken less than a second now, but the slowness still persists in the form.
    for rec in (select wrrh_col
                      wpbh_col_lvd,
                       wpbh_col_doc_no
          from wh_col,
               wkpl_col,
               wh_col
         where wrrh_col_no = :block.wreh_wrrh_col_no
           and wrrh_col_no = wreh_wrrh_col_no
             and wrrh_col_no = wpbh_col_no
           and wrrh_col_proj    = wpbh_col_proj
           and wrrh_proj_no     = wpbh_proj_no) loop
       if fun_name(rec.wpbh_col_lvd) = 'Y' then                      
        do something,
       end if;
      end loop;
    The select staement that used to run for 23 seconds is running in less than one second, but the form is still running very slow when I navigate to the detail record.
    Please advise.
    Thanks.

    Thanks Andrea for your prompt response, the problem is the select statement and like I stated, I tuned the select statement in toad and what normally takes 23 secs is taking less than 1 sec to run. If I comment out the call to the function, it is still slow. The select stament will returned null and it will still be slow. When I comment out the for loop, it run very fast. I dont know what else to do than tuned the select statement.

  • Mini HP laptop running on Windows 7 - runs very slow

     I have a mini HP Laptop.  It runs VERY slow and when I am typing, the buffer is WAY behind me.  Also, when trying to view videos online - eg. You Tube, everything is in slow motion or freezes.  Same with Skype and Facebook.  Slower than the old dial up internet!!!!
    The operating system is Windows 7 which came loaded with the laptop.

    Hello Seachange51,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your notebook is functioning very slowly, and I would be happy to guide you towards a resolution! To begin, I will need to ask you a few questions:
    What is the Product and Model Number of your desktop computer?
    Has your computer completed all of its important Windows Updates?
    Have you updated your HP drivers using the HP Support Assistant?
    Is this an on-going, or recent issue?
    In the meantime, I recommend following this document on Improving System Performance without Adding Memory (Windows 7). This should help improve the speed and efficiency of your notebook.
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • My MAC is running very slow and i am a complete novice and don't know what to do. i have had my Mac since 2008 and its probably in a mess. if you can help i would be grateful. EtreCheck version: 1.9.15 (52) Report generated 8 September 2014 09:09:26

    My MAC runs very slow. Rainbow wheel every time i try to go somewhere. Im a complete MAC novice. Only really use it for iTunes and email. the odd document here and there. The odd spreadsheet. Was brought up on a PC. I would imagine my system is in  mess. I think i downloaded that Mackeeper which i have just discovered was not a good idea. I found a thread about EtreCheck and it suggested i posted the report of my machine which i have done.I only have 2GB of space. Not sure how much i have left. My wife keeps putting photos on here like they are going out of fashion. Bought the machine in 2008 because everybody said you have a MAC. I've never really got to grips with it but at least it worked. Now it does not run very well at all. That spinning wheel is driving me mad. HELP please, never ever used a forum light this either so please go gentle on me. Cheers Paul
    EtreCheck version: 1.9.15 (52)
    Report generated 8 September 2014 09:09:26 BST
    Hardware Information: ?
      iMac (20-inch, Early 2008) (Verified)
      iMac - model: iMac8,1
      1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
      2 GB RAM
    Video Information: ?
      ATI Radeon HD 2600 Pro - VRAM: 256 MB
      iMac 1680 x 1050
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 0 days 0:31:45
    Disk Information: ?
      Hitachi HDP725032GLA380 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 319.21 GB (117.84 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information: ?
      Apple Inc. Built-in iSight
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Bose Corporation Bose USB Audio
      Apple Computer, Inc. IR Receiver
    Gatekeeper: ?
      Mac App Store and identified developers
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
      [running] com.trusteer.rooks.rooksd.plist Support
      [loaded] net.sourceforge.MonolingualHelper.plist Support
    Launch Agents: ?
      [running] com.trusteer.rapport.rapportd.plist Support
    User Login Items: ?
      iTunesHelper
    Internet Plug-ins: ?
      Google Earth Web Plug-in: Version: 5.1 Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
      iPhotoPhotocast: Version: 7.0
      QuickTime Plugin: Version: 7.7.3
      eMusicRemote: Version: (null) Support
      eMusic: Version: Unknown
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      Flash Player  Support
      Flip4Mac WMV  Support
      Trusteer Endpoint Protection  Support
    Time Machine: ?
      Time Machine not configured!
    Top Processes by CPU: ?
          2% iTunes
          2% WindowServer
          0% coreaudiod
          0% fontd
          0% rapportd
    Top Processes by Memory: ?
      178 MB Finder
      133 MB com.apple.WebKit.WebContent
      109 MB iTunes
      92 MB Safari
      63 MB com.apple.quicklook.satellite
    Virtual Memory Information: ?
      24 MB Free RAM
      821 MB Active RAM
      807 MB Inactive RAM
      291 MB Wired RAM
      338 MB Page-ins
      680 KB Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Problem description: (MacBook Pro 15" late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open.  Randomly freezes and becomes unrespo

    Problem description:
    (MacBook Pro 15” late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open.  Randomly freezes and becomes unresponsive, requiring forced power down.  Randomly logs off.  Removed Kodak AIO software via Clean My Mac2, but BonjourAgent still there and requesting access.  Cleaned weekly with Clean My Mac2 and running Sophos AntiVirus. 2GB memory installed.  Currently 169.99 GB available of 249.2 GB capacity.
    Help?
    EtreCheck version: 2.1.8 (121)
    Report generated March 21, 2015 at 11:35:35 AM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Late 2008) (Technical Specifications)
        MacBook Pro - model: MacBookPro5,1
        1 2.4 GHz Intel Core 2 Duo CPU: 2-core
        2 GB RAM Upgradeable
            BANK 0/DIMM0
                1 GB DDR3 1067 MHz ok
            BANK 0/DIMM1
                1 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 59
    Video Information: ℹ️
        NVIDIA GeForce 9400M - VRAM: 256 MB
            Color LCD 1440 x 900
        NVIDIA GeForce 9600M GT - VRAM: 256 MB
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 0:13:37
    Disk Information: ℹ️
        Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 249.20 GB (168.91 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-ST DVDRW  GS21N 
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple, Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Extensions
        [not loaded]    com.leapfrog.driver.LfConnectDriver (1.11.1 - SDK 10.10) [Click for support]
        [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
        [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.leapfrog.codeless.kext (2) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.kodak.BonjourAgent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.sophos.uiserver.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.leapfrog.connect.authdaemon.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.sophos.common.servicemanager.plist [Click for support]
    User Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
    User Login Items: ℹ️
        Dropbox    Application  (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        AmazonMP3DownloaderPlugin1017265: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.94 [Click for support]
        Google Earth Web Plug-in: Version: 6.0 [Click for support]
    Safari Extensions: ℹ️
        AdBlock
        Disconnect
        Add To Amazon Wish List
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
        Tuxera NTFS  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 249.20 GB Disk used: 80.29 GB
        Destinations:
            Backup [Local]
            Total size: 63.67 GB
            Total number of backups: 1
            Oldest backup: 2015-02-23 16:16:08 +0000
            Last backup: 2015-02-23 16:16:08 +0000
            Size of backup disk: Too small
                Backup size 63.67 GB < (Disk used 80.29 GB X 3)
    Top Processes by CPU: ℹ️
             5%    WindowServer
             1%    loginwindow
             0%    AppleSpell
             0%    SophosUIServer
             0%    SophosAntiVirus
    Top Processes by Memory: ℹ️
        118 MB    InterCheck
        101 MB    SophosScanD
        60 MB    Dropbox
        54 MB    mds_stores
        41 MB    SophosAntiVirus
    Virtual Memory Information: ℹ️
        49 MB    Free RAM
        682 MB    Active RAM
        652 MB    Inactive RAM
        315 MB    Wired RAM
        1.49 GB    Page-ins
        2 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 21, 2015, 11:18:52 AM    Self test - passed
        Mar 21, 2015, 10:53:03 AM    /Library/Logs/DiagnosticReports/SophosUIServer_2015-03-21-105303_[redacted].cra sh
        Mar 19, 2015, 07:59:03 PM    /Library/Logs/DiagnosticReports/CalNCService_2015-03-19-195903_[redacted].crash

    Linc Davis wrote:
    Slow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
    Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts.
    Memory in the MacBook Air is not upgradable. If that's what you have, you should restore the previous system from a backup, or replace the machine. Ask if you need guidance.
    The Etrecheck report clearly shows that SylvieRose has a Macbook Pro, not a Macbook Air and that there are only 2 GB  RAM installed.  The Etrecheck report can be very informative if one takes the time to examine it. 
    Ciao.

  • I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

    I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

    wen6275,
    It looks like you're actually using a camera or phone to take a photo of your monitor.
    That's not what is commonly known as a "screen shot". 
    It looks like you're on a Mac.  Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
    I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
    Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file.  Would you mind elaborating?

  • Myfi is running very slow, what can cause this?

    Myfi is running very slow, what can cause this?

    Either a service problem in your area or a glitch/hardware problem on the Jetpack.
    To determine service problems simply travel to a different area and rerun your speed test.  If the problem persists then its a glitch/hardware problem on the Jetpack.  If not then its a service problem in that particular area that would need to be addressed by VZW or improved with the usage of antennas/boosters.
    When performance testing be sure to use a tool that is universal to better illustrate the problem.  For example a common utility is to speed test using www.speedtest.net.  Run this test a few times to build an average and then perform the same tests in a different location or after changing something around.

  • Mac book pro is running very slow what can i do to speed it up?

    mac book pro is running very slow what can i do to speed it up?

    Things You Can Do To Resolve Slow Downs
    If your computer seems to be running slower here are some things you can do:
    Start with visits to:     OS X Maintenance - MacAttorney;
                                      The X Lab: The X-FAQs;
                                      The Safe Mac » Mac Performance Guide;
                                      The Safe Mac » The myth of the dirty Mac;
                                      Mac maintenance Quick Assist.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    Repair the Hard Drive - Lion/Mountain Lion/Mavericks
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
    Suggestions for OS X Maintenance
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
    Troubleshooting Applications
    I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
    If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
        used to manage backups and to restore backups. Time Machine
        requires a backup drive that is at least twice the capacity of the
        drive being backed up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Referenced software can be found at MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Pre-Mavericks
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Mavericks and later
    Open Activity Monitor in the Utilities folder.  Select All Processes from the View menu.  Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • I upgraded the OS system on my 2011 mac mini.  It now runs very slow.  Do I need to increase the ram.  I only have 2 GB now.

    My 2011 mac mini now runs very slow.  I have to wait on it to do basic things.  I only have 2 GB of ram.  It came with this amount and it fan fine for several years.  But I upgraded to the most recent Os system and now it runs slow.  What do I need?  More RAM?

    murphygay wrote:
    I will upgrade to 8GB. Thanks for the advice.  Also have an older (2009) 24" IMAC and it also runs slow with the upgrade. It has 4 GB. I think I will replace it with a brand new 21 or 27 inch.  Thanks for the response.
    Bill
    That's one way to justify a new Mac. :-)  Adding more RAM to the 2009 model is cheaper, though (but I'm guessing not as much fun).

  • Mini running started running very slow

    My Mac mini started to run very slow.  Any ideas as to why?

    Hi, first try this...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Then...
    Open Console in Utilities & see if there are any clues or repeating messages when this slowness happens.

Maybe you are looking for

  • Trial version help

    I just installed Adobe Flash cs4 window trial version on my computer. I opened one of my school project, then it shown a window read "Font Mapping", and said the document contains one of more fonts currently not available on your system. The text wil

  • A possible bug, Tab control in subpanel

    Hi, I think when a Tab control is used in a subpanel, it happens something faulty if you try to use right and left "tab locations". See the attached code. will someone check the code and say if I've made any mistake or not. I see some black boxes and

  • JTreeCombo ... is it actually possible ??

    I am trying to create a dropdown Combobox that contains a JTree as it's popup component. Does anyone have any ideas or know of current solutions ?? Thanks in advance

  • Getting error "Invalid pc in LineNumberTable in class file "

    Hi All, I have a applicaiton in OAF (build on jdeveloper 9i) which is running fine in jdeveloper but when i deploy it on the server its giving me error as follow:- "oracle.apps.fnd.framework.OAException: Could not load application module 'xx.oracle.a

  • Graphics become blurry and quality compromised after rendering

    Why do my PNGs -- which are beautiful and crisp -- all go fuzzy (as well as the video even looks less crisp) after I render?  If I remove one of the graphics, it sometimes corrects it.  I've tried re-importing the pNGs... Seems related to anything th