What to do when my phone completely dies and wont hold any charge or come back on when connected via usb or dock?????

i need help asap
please??

Hello bigdaddydeangelo,
I would be concerned too if my iPhone was not powering on.  I recommend following steps 3-6 below:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on),reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
You can find the full article here:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • So I just got my iphone, and i was trying to get it to download songs on my phone, when the phone suddenly died, and even though im charging it right now, it still won't turn on, been going on about 30 min to an hour now

    So i just bought my Iphone, and i was trying to put songs on it from Itunes, when it suddenly turned off, and even though i have been charging it for the last hour, can not get it to even work, any suggestions?

    Try a Reset... press the home and sleep/lock buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • Phone hot and wont hold a charge

    Suddenly my phone is super hot and when charging it wont got to 100% also it looses the charge in less than 3 hrs. Would go for 10 befire all this. It is a 3gs . I have spple care.  I have apt at genus bar.  I did a back up and a restor and all is still same. I guess this means software is OK and it is a hardware prob???

    Charging has always been recommended without an iOS device in a case...many of those do not allow heat to dissipate.
    Turn down screen brightness, turn off things you don't need, like Bluetooth if not being used, change the Mail push timing so it is less frequent...all things that use energy should be stretched out to save battery time.

  • HT1766 what do i do when my phone is locked and it says to connect to itunes?

    what do i do when my phone is locked and it says to connect to itunes?

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance

    When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    See also:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *https://support.mozilla.org/kb/Images+or+animations+do+not+show

  • When my iphone 3G dies, and i plug it in, it shows the apple sign but never turns on ???

    help me! when my iphone 3G dies, and i plug  it in, it shows the apple sign but never turns back on !!!!!!

    When the phone shows only the Apple logo it usually indicates an issue with the system software that is preventing the phone from completing the boot sequence. This can be remedied by putting the phone into DFU mode and restoring the system software. This will remove all data and software from the phone and put a fresh set of system software on the phone, so hopefully you have a recent backup.
    To put your iPhone/iPod into DFU mode:
    1. Make sure the iPhone/iPod is connected to the computer
    2. Hold down the sleep/wake button and home button at the same time for 8 seconds
    3. Let go of the sleep/wake button and keep holding down the home button
    4. If you are successful, a dialog box will pop up in iTunes stating that iTunes has detected an iPod/iPhone in recovery mode. Note that a successful DFU will result in a blank black screen on your iPhone/iPod.
    5. Click OK, then click the restore button in iTunes.
    After that you will be able to resync your data and be good to go.
    Hope this helps.

  • How can I transfer photos from LG phone to mac notebook.  Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

    How can I transfer photos from LG phone to mac notebook.  Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

    Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.

  • So my Ipod will no longer turn on. i leave it on my Ihome and nothing happens. whenever i try to turn it on i get the Apple logo and then it dies and says i should charge it, so i do and it does it again. What does this mean? is my battery totally dead?

    So my Ipod will no longer turn on. i leave it on my Ihome and nothing happens. whenever i try to turn it on i get the Apple logo and then it dies and says i should charge it, so i do and it does it again. What does this mean? is my battery totally dead? please i really need help

    Did you try to charge it using the adapter or your computer?
    If you can, let it charge for about 15min, then connect in recovery mode, described in this article:
    iOS: Unable to update or restore
    If still not luck, your battery might have to be replaced:
    Apple - Support - Service Answer Center

  • When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

    When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

    http://osxdaily.com/2014/10/17/os-x-yosemite-installation-stuck/
    also use the Command-L to view logs during installation

  • HT201441 What will happen to the phone if i cannot get hold of the previous owner

    What will happen to the phone if i cannot get hold of the previous owner??
    Is there any way to find the previous owners email address to contact him/herr??

    It becomes unusable. Makes a nice paper weight.

  • HT203175 how do i know if my phone is charging when it just powered off and wont power back up?

    How do I know if my phone is charging when it just powered off and wont power back up?

    Hold the power button and it should show a red battery icon with a lightning bolt symbol. That symbol indicates charging.

  • I have an ipod touch. previously when i did not update it it used to download skype and kik messenger but now when i have updated it it wont download any od them. i have 4.2.1 software at the moment. im really confused, what might be the problem here?

    i have an ipod touch. previously when i did not update it it used to download skype and kik messenger but now when i have updated it it wont download any od them. i have 4.2.1 software at the moment. im really confused, what might be the problem here?

    Many developers when they updated their apps fro the newer iOSs dropped support for the older iOSs. That included Skype and other developers. Unless you have a copy of the apps version that was compatible with your iPod/iOS you are out of luck. Do you cave such a copy in a computer file backup??

  • My iphone 4 has become extremely sensitive i cant talk on the phone without putting calls on hold, mute or hanging up!! when i'm in a call it's like the screen has become super sensitive to touch! I tried putting a screen protecter but didnt work pls help

    My iphone 4 has become extremely sensitive i cant talk on the phone without putting calls on hold, mute or hanging up!! when i'm in a call it's like the screen has become super sensitive to touch! I tried putting on a screen protecter but this didnt work please help?

    While on a call, the iPhone display should go black when lifted to your ear. Is this not happening or only happening intermittently?
    Have you tried making calls without your silicone case on? Does this make any difference?
    You could try updating or restoring the software to try to rule that out as a cause. If the issue remains after restoring then the issue is probably hardware related and may need to be serviced.

  • My ipod is completely dead and wont charge. What should I do?

    Ipod completely dead and wont charge. I've had it plugged in for days to multiple things. never happened before. please help!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Battery died, wont hold a charge, just died.  Fully charged battery dies in approx 2 hours.  Is it battery gone bad. Or something causing battery to use excessive amount of energy.  Do you lose data if battery goes out?

    Battery died, wont hold a charge.  After fully charging battery, battery loses all power in 2 hours. Is this indicative of a battery gone bad or something else?  Will I lose data if battery completely dies?

    Hi, thanks for the reply.
    Yes I have done the reset-didn't work.
    Yeh, the calibration was done so the phone turned off, then plugged back in to charge back to 100%!
    The iphone4s was connected to the charger outlet, the second I unplugged the phone the battery percentage went from 100% to 98%.
    AS we speak my phone is now on 100%, after 10 mins usage and 33 minutes standby. This just doesn't correlate with the decrease in battery life associated with every other number (e.g 99,98,97%) apart from when it is on 100%.

Maybe you are looking for

  • Tv shows on Touch

    Hi, I have a slight problem when i try to put a dvd of tv shows that i have taped of the television onto my touch. I have the handbrake software and when i try to encode the dvd it starts and finishs immediatly and there is no file to speak of. When

  • PO Line cannot choose other inv item

    Hi, I am using R12 PO module to create one PO, and on the PO line, After I choose the PO line type as Service, I cannot choose other item on the line even after I changed the PO line type to Goods. I am sure that many item assigned to this Org for I

  • Formula at run time

    Hi everyone I need to create a piece of code that takes a number of channels and creates a new channel making use of a formula, this is no problem if you want to hard code the formula, but it seems almost impossible if you want to change the formula

  • Camera stuck in Square format after iOS7 update...

    ....cannot seem to change to standard or video modes. Tried a complete reboot and it's still stuck! Anyone else with this problem - any fix??

  • Downloading PS from CC

    Hi I'm trying to download Photoshop from CC, but after several attempts keep getting the same error message - 'update failed ... learn more.' When I click on the learn more link I receive the same message - 'there was a problem updating Photoshop CC